Search
Search Criteria
Products meeting the search criteria
ROTALIGN touch is the first cloud-enabled touchscreen laser shaft alignment system with integrated mobile connectivity.
With ROTALIGN touch, alignment trend is fully integrated into your asset management and condition-based maintenance programs.
Maintenance and Reliability managers can remotely prepare alignment jobs in the alignment software and connect to the Cloud to transfer them to a ROTALIGN® touch device, anywhere in the world.
The Only Adaptive Laser Shaft Alignment System for EX areas.Intrinsically safe , Adaptability saves time and effort, Best measurement accuracy and repeatability, Fluke Reliability Extended Warranty Program.
Advanced vertical machine alignment with vertiSWEEP continuous measurement mode, ALIGNMENT RELIABILITY CENTER 4.0 PC software including auto-activation and PDF reporting, Mobile connectivity with integrated Wi-Fi, Bluetooth, RFID and camera, ATEX/IECEx Zone 1 certified including ruggedized IP68 tablet device
USED Pruftechnik Rotalign Touch Laser Shaft Alignment System (Rotalign Touch)
The ROTALIGN touch is the most powerful laser shaft alignment platform on the market. The ROTALIGN touch truly is unique. Let's find out how the leading laser shaft alignment system delivers the best measurement accuracy while offering the most innovative features that save you time and effort.
Features:
Intelligent measurement modes including uncoupled intelliPASS and intelliPOINT
Cardan shaft alignment with cardan in place
Vertical machine alignment with vertiSWEEP continuous measurement mode
Softfoot diagnostics
Live Trend
Horizontal and Vertical move simulator
Measurement table including different alignment jobs
Machine train with real 3D machines
Real time Intelligent measurement quality
Customized tolerances (even asymetrical)
SPECS :
CPU
Processor: 1.0 GHz quad core ARM®Cortex-A9
Memory: 2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory
Display
Technology: Projective capacitive multi-touch screen
Type: Transmissive (sunlight-readable) backlit TFT color graphic display Optically bonded, protective industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel Dimensions: 178 mm (7”) diagonal
LED indicators
3 LEDs for battery status, 1 LED for WiFi communication
Power supply
Operating time: 12 hours typical use (based upon an operating cycle of 25% measurement, 25% computation, 50% ‘sleep’ mode)
Battery: Lithium-ion rechargeable battery 3.6 V / 80 Wh AC adapter/charger: 12 V / 36 W; standard barrel connector (5.5 x 2.1 x 11 mm)
External interface
USB host for memory stick USB slave for PC communication, charging (5 V DC / 1.5 A) RS-232 (serial) for sensor, RS-485 (serial) for sensor I-Data for sensor Integrated Bluetooth® wireless communication (covers direct line of sight distances of up to 30 m / 100 ft depending on the prevailing envir-onmental conditions) Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps (depending on configuration) Integrated RFID with read and write capabilities (depending on con-figuration)
Environmental protection
IP 65 (dustproof and water jets resistant) – as defined in regulation DIN EN 60529 (VDE 0470-1), shockproof Relative humidity: 10% to 90%
Drop test
1 m (3 1/4 ft)
Temperature range
Operation: 0°C to 40°C (32°F to 104°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 50°C (14°F to 122°F)
Dimensions
Approx. 273 x 181 x 56 mm (10 3/4” x 7 1/8” x 2 3/16”)
Weight
Approx. 1.88 kg (4.1 lbs)
Camera
5 MP built-in (depending on configuration) LEDs: Risk Group 1 according to IEC 62471:2006
CE conformity
Refer to the CE compliance certificate in www.pruftechnik.com
FCC compliance
Requirements fulfilled (refer to the provided document ‘Safety and gen-eral information’)
INCLUDED :
Pruftechnik Rotalign Touch Laser Shaft Alignment System (BC# -L/T*)
Rotalign SensALIGN Laser
Rotalign SensALIGN Receiver
(2) Chain Brackets
Tape Measurer
Carrying Case (G)
MEMS inclinometers
Also you can check product : USED Pruftechnik Rotalign Ultra IS Laser Shaft Alignment System
Features:
Intelligent measurement modes including uncoupled intelliPASS and intelliPOINT
Cardan shaft alignment with cardan in place
Vertical machine alignment with vertiSWEEP continuous measurement mode
Softfoot diagnostics
Live Trend
Horizontal and Vertical move simulator
Measurement table including different alignment jobs
Machine train with real 3D machines
Real time Intelligent measurement quality
Customized tolerances (even asymetrical)
SPECS :
CPU
Processor: 1.0 GHz quad core ARM®Cortex-A9
Memory: 2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory
Display
Technology: Projective capacitive multi-touch screen
Type: Transmissive (sunlight-readable) backlit TFT color graphic display Optically bonded, protective industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel Dimensions: 178 mm (7”) diagonal
LED indicators
3 LEDs for battery status, 1 LED for WiFi communication
Power supply
Operating time: 12 hours typical use (based upon an operating cycle of 25% measurement, 25% computation, 50% ‘sleep’ mode)
Battery: Lithium-ion rechargeable battery 3.6 V / 80 Wh AC adapter/charger: 12 V / 36 W; standard barrel connector (5.5 x 2.1 x 11 mm)
External interface
USB host for memory stick USB slave for PC communication, charging (5 V DC / 1.5 A) RS-232 (serial) for sensor, RS-485 (serial) for sensor I-Data for sensor Integrated Bluetooth® wireless communication (covers direct line of sight distances of up to 30 m / 100 ft depending on the prevailing envir-onmental conditions) Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps (depending on configuration) Integrated RFID with read and write capabilities (depending on con-figuration)
Environmental protection
IP 65 (dustproof and water jets resistant) – as defined in regulation DIN EN 60529 (VDE 0470-1), shockproof Relative humidity: 10% to 90%
Drop test
1 m (3 1/4 ft)
Temperature range
Operation: 0°C to 40°C (32°F to 104°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 50°C (14°F to 122°F)
Dimensions
Approx. 273 x 181 x 56 mm (10 3/4” x 7 1/8” x 2 3/16”)
Weight
Approx. 1.88 kg (4.1 lbs)
Camera
5 MP built-in (depending on configuration) LEDs: Risk Group 1 according to IEC 62471:2006
CE conformity
Refer to the CE compliance certificate in www.pruftechnik.com
FCC compliance
Requirements fulfilled (refer to the provided document ‘Safety and gen-eral information’)
INCLUDED :
Pruftechnik Rotalign Touch Laser Shaft Alignment System (BC# -L/T*)
Rotalign SensALIGN Laser
Rotalign SensALIGN Receiver
(2) Chain Brackets
Tape Measurer
Carrying Case (G)
MEMS inclinometers
Also you can check product : USED Pruftechnik Rotalign Ultra IS Laser Shaft Alignment System
The ROTALIGN touch is the most powerful laser shaft alignment platform on the market. The ROTALIGN touch truly is unique. Let's find out how the leading laser shaft alignment system delivers the best measurement accuracy while offering the most innovative features that save you time and effort.
NEW Pruftechnik ROTALIGN Touch Laser Shaft Alignment System (ROTALIGN Touch)
Pruftechnik Rotalign Touch Shaft Alignment System
ROTALIGN touch is the first cloud-enabled touchscreen laser shaft alignment system with integrated mobile connectivity.
With ROTALIGN touch, alignment trend is fully integrated into your asset management and condition-based maintenance programs.
Maintenance and Reliability managers can remotely prepare alignment jobs in the alignment software and connect to the Cloud to transfer them to a ROTALIGN touch device, anywhere in the world. Alignment technicians receive alignment jobs directly on their ROTALIGN touch device. Once completed, the jobs can be uploaded wirelessly back to the Cloud.
A direct connection from the ROTALIGN touch to the alignment software is also possible.
Built-in RFID machine identification and asset-specific jobs make it possible to track the alignment condition of individual assets over time. The alignment trend provides meaningful information and can be used as a condition monitoring parameter to diagnose machine condition even more accurately.
With the onboard camera alignment reports can easily be supplemented with pictures for easier knowledge transfer.
Intelligent features for shaft alignment - 100% Precision - 0% Error
The unique intelliSWEEP® sensor technology enables continuous measurements and real-time quality for precise, accurate and repeatable results. The intelliSWEEP® HD measurement mode automatically detects and eliminates sources of measurement errors such as coupling play, rotational angle or environmental vibration.
As shaft rotates, hundreds of real measurement points are taken automatically. The results are far more accurate than those based on 3 measurement positions.
Features:
Intelligent measurement modes including uncoupled intelliPASS and intelliPOINT
Cardan shaft alignment with cardan in place
Vertical machine alignment with vertiSWEEP continuous measurement mode
Softfoot diagnostics
Live Trend
Horizontal and Vertical move simulator
Measurement table including different alignment jobs
Machine train with real 3D machines
Real time Intelligent measurement quality
Customized tolerances (even asymetrical)
Specifications:
CPU
Processor: 1.0 GHz quad core ARM®Cortex-A9
Memory: 2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory
Display
Technology: Projective capacitive multi-touch screen
Type: Transmissive (sunlight-readable) backlit TFT color graphic display Optically bonded, protective industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel Dimensions: 178 mm (7”) diagonal
LED indicators
3 LEDs for battery status, 1 LED for WiFi communication
Power supply
Operating time: 12 hours typical use (based upon an operating cycle of 25% measurement, 25% computation, 50% ‘sleep’ mode)
Battery: Lithium-ion rechargeable battery 3.6 V / 80 Wh AC adapter/charger: 12 V / 36 W; standard barrel connector (5.5 x 2.1 x 11 mm)
External interface
USB host for memory stick USB slave for PC communication, charging (5 V DC / 1.5 A) RS-232 (serial) for sensor, RS-485 (serial) for sensor I-Data for sensor Integrated Bluetooth® wireless communication (covers direct line of sight distances of up to 30 m / 100 ft depending on the prevailing envir-onmental conditions) Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps (depending on configuration) Integrated RFID with read and write capabilities (depending on con-figuration)
Environmental protection
IP 65 (dustproof and water jets resistant) – as defined in regulation DIN EN 60529 (VDE 0470-1), shockproof Relative humidity: 10% to 90%
Drop test
1 m (3 1/4 ft)
Temperature range
Operation: 0°C to 40°C (32°F to 104°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 50°C (14°F to 122°F)
Dimensions
Approx. 273 x 181 x 56 mm (10 3/4” x 7 1/8” x 2 3/16”)
Weight
Approx. 1.88 kg (4.1 lbs)
Camera
5 MP built-in (depending on configuration) LEDs: Risk Group 1 according to IEC 62471:2006
CE conformity Refer to the CE compliance certificate in pruftechnik
FCC compliance
Requirements fulfilled (refer to the provided document ‘Safety and gen-eral information’)
INCLUDED :
Pruftechnik Rotalign Touch Laser Shaft Alignment System (BC# -L/T*)
Rotalign SensALIGN Laser
Rotalign SensALIGN Receiver
(2) Chain Brackets
Tape Measurer
Carrying Case (G)
Also you can check product : USED Pruftechnik Optalign Smart EX Laser Shaft Alignment
ROTALIGN touch is the first cloud-enabled touchscreen laser shaft alignment system with integrated mobile connectivity.
With ROTALIGN touch, alignment trend is fully integrated into your asset management and condition-based maintenance programs.
Maintenance and Reliability managers can remotely prepare alignment jobs in the alignment software and connect to the Cloud to transfer them to a ROTALIGN touch device, anywhere in the world. Alignment technicians receive alignment jobs directly on their ROTALIGN touch device. Once completed, the jobs can be uploaded wirelessly back to the Cloud.
A direct connection from the ROTALIGN touch to the alignment software is also possible.
Built-in RFID machine identification and asset-specific jobs make it possible to track the alignment condition of individual assets over time. The alignment trend provides meaningful information and can be used as a condition monitoring parameter to diagnose machine condition even more accurately.
With the onboard camera alignment reports can easily be supplemented with pictures for easier knowledge transfer.
Intelligent features for shaft alignment - 100% Precision - 0% Error
The unique intelliSWEEP® sensor technology enables continuous measurements and real-time quality for precise, accurate and repeatable results. The intelliSWEEP® HD measurement mode automatically detects and eliminates sources of measurement errors such as coupling play, rotational angle or environmental vibration.
As shaft rotates, hundreds of real measurement points are taken automatically. The results are far more accurate than those based on 3 measurement positions.
Features:
Intelligent measurement modes including uncoupled intelliPASS and intelliPOINT
Cardan shaft alignment with cardan in place
Vertical machine alignment with vertiSWEEP continuous measurement mode
Softfoot diagnostics
Live Trend
Horizontal and Vertical move simulator
Measurement table including different alignment jobs
Machine train with real 3D machines
Real time Intelligent measurement quality
Customized tolerances (even asymetrical)
Specifications:
CPU
Processor: 1.0 GHz quad core ARM®Cortex-A9
Memory: 2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory
Display
Technology: Projective capacitive multi-touch screen
Type: Transmissive (sunlight-readable) backlit TFT color graphic display Optically bonded, protective industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel Dimensions: 178 mm (7”) diagonal
LED indicators
3 LEDs for battery status, 1 LED for WiFi communication
Power supply
Operating time: 12 hours typical use (based upon an operating cycle of 25% measurement, 25% computation, 50% ‘sleep’ mode)
Battery: Lithium-ion rechargeable battery 3.6 V / 80 Wh AC adapter/charger: 12 V / 36 W; standard barrel connector (5.5 x 2.1 x 11 mm)
External interface
USB host for memory stick USB slave for PC communication, charging (5 V DC / 1.5 A) RS-232 (serial) for sensor, RS-485 (serial) for sensor I-Data for sensor Integrated Bluetooth® wireless communication (covers direct line of sight distances of up to 30 m / 100 ft depending on the prevailing envir-onmental conditions) Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps (depending on configuration) Integrated RFID with read and write capabilities (depending on con-figuration)
Environmental protection
IP 65 (dustproof and water jets resistant) – as defined in regulation DIN EN 60529 (VDE 0470-1), shockproof Relative humidity: 10% to 90%
Drop test
1 m (3 1/4 ft)
Temperature range
Operation: 0°C to 40°C (32°F to 104°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 50°C (14°F to 122°F)
Dimensions
Approx. 273 x 181 x 56 mm (10 3/4” x 7 1/8” x 2 3/16”)
Weight
Approx. 1.88 kg (4.1 lbs)
Camera
5 MP built-in (depending on configuration) LEDs: Risk Group 1 according to IEC 62471:2006
CE conformity Refer to the CE compliance certificate in pruftechnik
FCC compliance
Requirements fulfilled (refer to the provided document ‘Safety and gen-eral information’)
INCLUDED :
Pruftechnik Rotalign Touch Laser Shaft Alignment System (BC# -L/T*)
Rotalign SensALIGN Laser
Rotalign SensALIGN Receiver
(2) Chain Brackets
Tape Measurer
Carrying Case (G)
Also you can check product : USED Pruftechnik Optalign Smart EX Laser Shaft Alignment
ROTALIGN touch is the first cloud-enabled touchscreen laser shaft alignment system with integrated mobile connectivity.
With ROTALIGN touch, alignment trend is fully integrated into your asset management and condition-based maintenance programs.
Maintenance and Reliability managers can remotely prepare alignment jobs in the alignment software and connect to the Cloud to transfer them to a ROTALIGN® touch device, anywhere in the world.
NEW Pruftechnik Rotalign Touch EX Laser Shaft Alignment System (Rotalign Touch EX)
The only adaptive laser shaft alignment system for EX areas
Intrinsically safe
ATEX/IECEx Zone 1 certified. Avoid 'hot work permits' and save time.
Adaptability saves time and effort
Rugged tablet with touch screen, Active Situational Intelligence, integrated Wi-Fi, Bluetooth, RFID and camera
Best measurement accuracy and repeatability
Unique sensALIGN 5 single-laser technology offers repeatable high precision and adapts to any situation
Fluke Reliability Extended Warranty Program
NEW: The Fluke Reliability Extended Warranty Program now covers the ROTALIGN Touch EX and offers you peace of mind, convenience, device accuracy, and savings on service costs via:
Extending the manufacturer’s warranty from 2 to 5 years
Three free calibrations:
Calibrations for extended warranty customers are prioritized!
No risk of calibration price increase (the price of your 3 calibrations are locked in with purchase of the extended warranty)
A 15% discount on equipment repairs (not covered by the manufacturer’s warranty)
Adaptive alignment features when working in dangerous areas
ATEX/IECEx Zone 1 certified including ruggedized IP68 tablet device
Single-laser technology sensALIGN 5 featuring SWEEP and PASS Mode for uncoupled shafts
Active Situational Intellgence
Simultaneous Horizontal and Vertical Live Move Move Simulator
Thermal growth and targets
Spacer coupling and in-situ Cardan shaft alignment with rotating arm bracket
Soft Foot Wizard to diagnose soft foot problems
6-machine train alignment
Advanced vertical machine alignment with vertiSWEEP continuous measurement mode
ALIGNMENT RELIABILITY CENTER 4.0 PC software including auto-activation and PDF reporting
Mobile connectivity with integrated Wi-Fi, Bluetooth, RFID and camera
Advanced laser shaft alignment in EX/ATEX areas
ROTALIGN touch EX is Zone 1 ATEX/IECEX certified. Packed with user-friendly alignment features unique to PRUFTECHNIK, the ROTALIGN touch EX shortens the measurement time with:
Continuous SWEEP Mode for high-quality measurement in only one shaft rotation
Live Move function for simultaneous real-time machine corrections in both horizontal and vertical directions
vertiSWEEP to measure vertical machines in one rotation of the shaft
Cardan shaft rotating-arm bracket allows measurements to be performed without removing the shaft
Soft Foot Wizard to diagnose soft foot problems
Move Simulator lets the operator simulate shim values and horizontal corrections before moving the machine
Have instant access to the critical data you need with full mobile connectivity. The ROTALIGN touch EX tablet is Wi-Fi enabled and equipped with a Bluetooth module, an integrated camera, and an RFID reader for automatic machine identification and error-free two-way transfer of asset data.
Direct communication between the tablet and the ALIGNMENT RELIABILITY CENTER 4.0 PC software allows specialists to archive, analyze, and process alignment data to improve asset performance improvement and reliability.
Technology
sensALIGN 5
sensALIGN Series technology is based on PRUFTECHNIK single-laser technology and provides highly precise measurement results with the easiest mounting and measuring in the field.
sensALIGN 5 sensors include two HD large position-sensitive detectors (PSD) and MEMS inclinometers. Combined with detector extension capability (InfiniRange), it is always possible to measure and document the initial alignment condition, no matter how big the misalignment.
The technology also allows the simultaneous monitoring of machine corrections in vertical and horizontal directions, starting from any angular position where the sensor comes to stop.
General specifications
CPU
Exynos 7 Octa, 1.6GHz Octa-Core (Cortex-A53)
Memory
3 GB RAM, 16 GB Flash memory
Display
8“ TFT, 1280 x 800 pixels
Connectivity
Wi-Fi 802.11 a/b/g/n/ac (2.4GHz 5GHz)
Bluetooth 4.2
RFID
Cameras
8 MP AF 5 MP
IP
Rating IP 68
Operating temperature
-20 ... 50 °C
Battery
Li-Ion rechargeable battery 3.8 V / 4450 mAh / 16.91 Wh
up to 11 hours battery life
Dimensions,Weight
162 x 256 x 33 mm, ca. 1250 g
ATEX (Europe)
II 2G Ex db ia op is IIC T5 Gb
II 2D Ex tb ia op is IIIC T100°C Db
IECEx (International)
- Ex db ia op is IIC T5 Gb
- Ex tb ia op is IIIC T100°C Db
Wireless EX module
General specifications
Type
2.4 GHz, Class 1 connectivity, transmitting
power 100 mW Contains FCCID
POOWML-C40
Transmission distance
Up to 10 m [33 ft.] direct line of sight
Transmission distance
Up to 10 m [33 ft.] direct line of sight
Power supply
Batteries: 2 x 1.5 V IEC LR6 (“AA”) batteries
Only use Duracell Industrial ID 1500 or
Energizer E91
Operating time: 14 hours typical use (based upon an
operating cycle of 50% measurement, 50% standby)
Temperature range
Operating time: -10°C to 40°C (14°F to 104°F)
Environmental protection
IP 65: Dustproof and water spray resistant, shockproof
Dimensions
Approx. 81 x 41 x 34 mm (3 1/8” x 1 11/16” x 1 5/16”)
Weight
Approx. 133 g (4.7 oz.) including batteries and cable
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: ZELM 11 ATEX 0474
IECEx ZLM 11.0009
sensALIGN 5 EX sensor
General specifications
Type
5-axis sensor: 2 planes (4 displacement axes and angle)
Measurement range: Unlimited, dynamically extendible
Resolution: 1 μm (0.04 mil) and angular 10 μRad
Accuracy (avg): > 98%
Measurement rate: approx. 20 Hz
Inclinometer
Resolution: 0.1°
Error: 0.3% full scale
LED indicators
2 LEDs
Environmental protection
IP 65: dustproof and water jets resistant, shockproof
Relative humidity:10% to 90%
Ambient light protection
Yes
Temperature range
Operation: -10°C to 50°C (14°F to 122°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Dimensions
Approx. 105 x 74 x 53 mm
(4 9/64” x 2 29/32” x 2 3/32”)
Weight
Approx. 220 g (7.7 oz)
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1074X
IECEx EPS 15.0067X
sensALIGN 5 EX laser
General specifications
Type
Semiconductor laser diode
Beam power
< 1mW
Inclinometer
Resolution: 0.1°
Error: 0.3% full scale
Beam divergence
0.3 mrad
Wavelength
630 – 680 nm (red, visible)
Laser class
Class 2 according to IEC 60825-1:2014
The laser complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Safety precaution
Do not look into laser beam
Power supply
Batteries: 2 x 1.5 V IEC LR6 (“AA“)
Only use Duracell Industrial ID 1500 or Energizer
E91
Operating time: 120 hours
Protection
IP 65: dustproof and water jets resistant, shockproof
Relative humidity: 10% to 90%
Temperature range
Operation: -10 °C to 50 °C (14 °F to 122 °F)
Storage: -20 °C to 60 °C (-4 °F to 140 °F)
Dimensions
Approx. 105 x 74 x 47 mm
(4 9/64” x 2 29/32” x 1 27/32”)
Weight
Approx. 225 g (7 15/16 oz.)
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1 075
IECEx EPS 15.0068
Optical output power laser (failure) < 35 mW
Also you can check product : USED Pruftechnik Optalign Touch Laser Alignment System
Intrinsically safe
ATEX/IECEx Zone 1 certified. Avoid 'hot work permits' and save time.
Adaptability saves time and effort
Rugged tablet with touch screen, Active Situational Intelligence, integrated Wi-Fi, Bluetooth, RFID and camera
Best measurement accuracy and repeatability
Unique sensALIGN 5 single-laser technology offers repeatable high precision and adapts to any situation
Fluke Reliability Extended Warranty Program
NEW: The Fluke Reliability Extended Warranty Program now covers the ROTALIGN Touch EX and offers you peace of mind, convenience, device accuracy, and savings on service costs via:
Extending the manufacturer’s warranty from 2 to 5 years
Three free calibrations:
Calibrations for extended warranty customers are prioritized!
No risk of calibration price increase (the price of your 3 calibrations are locked in with purchase of the extended warranty)
A 15% discount on equipment repairs (not covered by the manufacturer’s warranty)
Adaptive alignment features when working in dangerous areas
ATEX/IECEx Zone 1 certified including ruggedized IP68 tablet device
Single-laser technology sensALIGN 5 featuring SWEEP and PASS Mode for uncoupled shafts
Active Situational Intellgence
Simultaneous Horizontal and Vertical Live Move Move Simulator
Thermal growth and targets
Spacer coupling and in-situ Cardan shaft alignment with rotating arm bracket
Soft Foot Wizard to diagnose soft foot problems
6-machine train alignment
Advanced vertical machine alignment with vertiSWEEP continuous measurement mode
ALIGNMENT RELIABILITY CENTER 4.0 PC software including auto-activation and PDF reporting
Mobile connectivity with integrated Wi-Fi, Bluetooth, RFID and camera
Advanced laser shaft alignment in EX/ATEX areas
ROTALIGN touch EX is Zone 1 ATEX/IECEX certified. Packed with user-friendly alignment features unique to PRUFTECHNIK, the ROTALIGN touch EX shortens the measurement time with:
Continuous SWEEP Mode for high-quality measurement in only one shaft rotation
Live Move function for simultaneous real-time machine corrections in both horizontal and vertical directions
vertiSWEEP to measure vertical machines in one rotation of the shaft
Cardan shaft rotating-arm bracket allows measurements to be performed without removing the shaft
Soft Foot Wizard to diagnose soft foot problems
Move Simulator lets the operator simulate shim values and horizontal corrections before moving the machine
Have instant access to the critical data you need with full mobile connectivity. The ROTALIGN touch EX tablet is Wi-Fi enabled and equipped with a Bluetooth module, an integrated camera, and an RFID reader for automatic machine identification and error-free two-way transfer of asset data.
Direct communication between the tablet and the ALIGNMENT RELIABILITY CENTER 4.0 PC software allows specialists to archive, analyze, and process alignment data to improve asset performance improvement and reliability.
Technology
sensALIGN 5
sensALIGN Series technology is based on PRUFTECHNIK single-laser technology and provides highly precise measurement results with the easiest mounting and measuring in the field.
sensALIGN 5 sensors include two HD large position-sensitive detectors (PSD) and MEMS inclinometers. Combined with detector extension capability (InfiniRange), it is always possible to measure and document the initial alignment condition, no matter how big the misalignment.
The technology also allows the simultaneous monitoring of machine corrections in vertical and horizontal directions, starting from any angular position where the sensor comes to stop.
General specifications
CPU
Exynos 7 Octa, 1.6GHz Octa-Core (Cortex-A53)
Memory
3 GB RAM, 16 GB Flash memory
Display
8“ TFT, 1280 x 800 pixels
Connectivity
Wi-Fi 802.11 a/b/g/n/ac (2.4GHz 5GHz)
Bluetooth 4.2
RFID
Cameras
8 MP AF 5 MP
IP
Rating IP 68
Operating temperature
-20 ... 50 °C
Battery
Li-Ion rechargeable battery 3.8 V / 4450 mAh / 16.91 Wh
up to 11 hours battery life
Dimensions,Weight
162 x 256 x 33 mm, ca. 1250 g
ATEX (Europe)
II 2G Ex db ia op is IIC T5 Gb
II 2D Ex tb ia op is IIIC T100°C Db
IECEx (International)
- Ex db ia op is IIC T5 Gb
- Ex tb ia op is IIIC T100°C Db
Wireless EX module
General specifications
Type
2.4 GHz, Class 1 connectivity, transmitting
power 100 mW Contains FCCID
POOWML-C40
Transmission distance
Up to 10 m [33 ft.] direct line of sight
Transmission distance
Up to 10 m [33 ft.] direct line of sight
Power supply
Batteries: 2 x 1.5 V IEC LR6 (“AA”) batteries
Only use Duracell Industrial ID 1500 or
Energizer E91
Operating time: 14 hours typical use (based upon an
operating cycle of 50% measurement, 50% standby)
Temperature range
Operating time: -10°C to 40°C (14°F to 104°F)
Environmental protection
IP 65: Dustproof and water spray resistant, shockproof
Dimensions
Approx. 81 x 41 x 34 mm (3 1/8” x 1 11/16” x 1 5/16”)
Weight
Approx. 133 g (4.7 oz.) including batteries and cable
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: ZELM 11 ATEX 0474
IECEx ZLM 11.0009
sensALIGN 5 EX sensor
General specifications
Type
5-axis sensor: 2 planes (4 displacement axes and angle)
Measurement range: Unlimited, dynamically extendible
Resolution: 1 μm (0.04 mil) and angular 10 μRad
Accuracy (avg): > 98%
Measurement rate: approx. 20 Hz
Inclinometer
Resolution: 0.1°
Error: 0.3% full scale
LED indicators
2 LEDs
Environmental protection
IP 65: dustproof and water jets resistant, shockproof
Relative humidity:10% to 90%
Ambient light protection
Yes
Temperature range
Operation: -10°C to 50°C (14°F to 122°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Dimensions
Approx. 105 x 74 x 53 mm
(4 9/64” x 2 29/32” x 2 3/32”)
Weight
Approx. 220 g (7.7 oz)
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1074X
IECEx EPS 15.0067X
sensALIGN 5 EX laser
General specifications
Type
Semiconductor laser diode
Beam power
< 1mW
Inclinometer
Resolution: 0.1°
Error: 0.3% full scale
Beam divergence
0.3 mrad
Wavelength
630 – 680 nm (red, visible)
Laser class
Class 2 according to IEC 60825-1:2014
The laser complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Safety precaution
Do not look into laser beam
Power supply
Batteries: 2 x 1.5 V IEC LR6 (“AA“)
Only use Duracell Industrial ID 1500 or Energizer
E91
Operating time: 120 hours
Protection
IP 65: dustproof and water jets resistant, shockproof
Relative humidity: 10% to 90%
Temperature range
Operation: -10 °C to 50 °C (14 °F to 122 °F)
Storage: -20 °C to 60 °C (-4 °F to 140 °F)
Dimensions
Approx. 105 x 74 x 47 mm
(4 9/64” x 2 29/32” x 1 27/32”)
Weight
Approx. 225 g (7 15/16 oz.)
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1 075
IECEx EPS 15.0068
Optical output power laser (failure) < 35 mW
Also you can check product : USED Pruftechnik Optalign Touch Laser Alignment System
The Only Adaptive Laser Shaft Alignment System for EX areas.Intrinsically safe , Adaptability saves time and effort, Best measurement accuracy and repeatability, Fluke Reliability Extended Warranty Program.
Advanced vertical machine alignment with vertiSWEEP continuous measurement mode, ALIGNMENT RELIABILITY CENTER 4.0 PC software including auto-activation and PDF reporting, Mobile connectivity with integrated Wi-Fi, Bluetooth, RFID and camera, ATEX/IECEx Zone 1 certified including ruggedized IP68 tablet device
- 1