Flaw Detector
Flaw detector is a non-destructive testing tool or what is usually called a Non-Destructive Test (NDT). Non Destructive Test (NDT) is a non-destructive test, and how to use it is by using an ultrasonic sensor or sound sensor. The use of this ultrasonic sensor will not damage the material but is only for measurement and some also use magnets for detection.

The portable BondMaster 600 delivers a powerful combination of multimode bond testing software and highly advanced digital electronics for the nondestructive inspection of honeycomb and laminate composites and metal-to-metal bonds. or laminate composite, the BondMaster 600 offers exceptional ease-of-use thanks to its direct-access keys and streamlined interface that features convenient presets for common applications. The enhanced user interface and simplified workflow of the BondMaster 600 offers archiving and reporting that are accessible to any level of user.

The The GE Inspection Technologies USN 60 flaw detector is designed for outdoor use with two independent gates to monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications. It features pulse echo, dual, and thru-transmission test modes as well as measurement modes for zero-to-first and multi-echo with selectable flank or peak detection. This flaw detector also calculates weld ratings according to AWS specification D1.1 (formula D=A-B-C). The Square Wave Pulser mode satisfies a wide range of tough-to-penetrate applications, including composite materials. In this mode the voltage is scrollable in 10V increments from 50 to 450V. Pulse width can be adjusted in 10ns increments from 10 to 1000ns.

SpotChecker is a hand-held flaw detector for testing spotwelds in situ on the production line. It weighs just 3.2 kg, is battery operated and is sealed to IP65. It features hot swap battery exchange to ensure continuous operation. SpotChecker does not require intensive training but offers the advantage of an “expert” system for people less qualified in weld inspection.

This powerful new technology makes eddy current weld inspections easier, more accurate, and faster. By allowing the workflows to be instantly accessible on the device, Mentor EM helps to ensure strict compliance with codes, guidelines, and standard practices. Remotely collaborate with experts in real time. Introducing Mentor EM for eddy current weld inspection. No knobs, dials, or switches to mistakenly adjust during use.

The Instrument driver for USM 25 is required to exchange data and settings between the instrument USM 25 and the software AMPLECTOR Instrument Manager. All versions are supported USM 25, USM 25 DAC, USM 25 S, USM 25 SD and instrument options (DAC/TCG, DGS, Data Logger with 3rd gate). Instrument data supported by the Instrument driver USM 25: Instrument settings (ultrasonic parameters), A-scans, test results, and Data Recorder file types “Linear” and “Grid”.

GE Inspection Technologies USM 36 Ultrasonic Flaw Detector combines ergonomic and robust design and the biggest display screen of its class with state-of-the-art UT performance. It incorporates a range of innovative features to ensure that this new instrument is adopted as the everyday workhorse of flaw detectors by NDT inspectors globally. The Krautkramer USM 36 features a 7 inch LCD display with a of 800x480 pixel resolution.

The latest version of the USM 35X portable ultrasonic flaw detector from GE’s Inspection Technologies business, is now totally protected against the ingress of dust and high pressure jets of water to IP 66 and contains new software which allows its operation to Japanese weld inspection standards.
The USM 35X is designed for industrial environments by weighing only 2.2 kg, having a 14 hour battery life and by having a temperature range of 0 to 60 degrees Celsius.

Sleek but rugged, the Krautkrämer USM 100 is a portable, highly versatile flaw detector with smartphone-like capabilities. Designed ergonomically for unrivaled ease of use, it features a large touch screen and buttons that allow seamless ambidextrous operation. Digital features include a best-in-class user interface that streamlines setup, training time and updates. The new standard in flaw detection. Now also available with the industry-leading features of the Pro edition.

The Waygate Technologies Kraukramer USN 60L ultrasonic flaw detector series, a Baker Hughes business product (formerly GE Inspection Technologies), is optimized for use in direct sunlight and operation at extreme outdoor temperatures. These new characteristics make the instruments ideal for outdoor use, with increased long battery operation time of up to 11 hours. The USN 60L features a PRF (pulse repetition frequency) in spike mode of 15 Hz to 2 kHz. Inspect faster and detect more with ultrasonic testing solutions for every application. Increase your POD with technology designed to increase efficiency, without ever compromising accuracy.

The Waygate Technologies Krautkramer USM 36 Ultrasonic Flaw Detector, a Baker Hughes business product (formerly GE Inspection Technologies), is the most versatile ultrasonic flaw detector on the market thanks to its ability to operate in DAC, AWS and DGS modes and with applications including weld inspections, thickness measurements, corrosion measurement, forging inspections and other inspections for difficult materials. The industries where the Waygate Technologies Krautkramer USM 36 proves useful include the automobile, power generation, petrochemical, and aerospace industries.

The entire UT flaw detector system is housed in a glove-friendly touchscreen tablet that’s as easy to use as a smartphone. Pre-loaded Mentor Create software is fully customizable, allowing for user-defined menus and workflows (apps) for step-by-step guidance through the inspection process– from calibration to probe location to analysis. Confident and educated users mean that even the most complex inspections are performed consistently every time. Mentor UT is the first ultrasonic testing device to easily allow wireless connectivity and live streaming, so inspectors can get real-time second opinions when they need them. That same wireless cloud connectivity enables Mentor UT to remotely generate comprehensive inspection reports on users’ desktops with the click of a button.

Sonatest's comprehensive range of portable phased array flaw detectors provide the end user with unrivalled flexibility and performance in the field of Non Destructive Flaw detection. Retaining the best features of the established Veo line, the new Veo3 now offers a PCAP touch interface, user templates, and more importantly, live TFM. The Veo3 multi-techniques allow inspectors to keep inspecting as they always have, with no need to change their current workflow and by doing so, users can benefit from the additional resolution and sizing performance of TFM while carrying out an already approved, trusted and reliable procedure.

GE/Waygate Technologies Krautkramer DMS Go Ultrasonic Thickness Gauges, a Baker Hughes business product (formerly GE Inspection Technologies), provide accurate, reliable, and comprehensive thickness inspection data in a wide range of applications and environments. The DMS GO features the same hardware and operating platform as the USM Go flaw detector, combining the two to offer a powerful instrument. These Gauges are lightweight, ergonomic, and IP67 rated for operating in harsh environments. The DMS Go is ideal for inspections in oil & gas, power generation, aerospace, and metals industries.

The WAVE interactive flaw detector integrates the latest technologies available in order to create a revolution in the ultrasonic non-destructive testing equipment market. Introducing WAVE by Sonatest. It integrates the latest technologies available in order to create a revolution in the ultrasonic non-destructive testing equipment market. Not only is it innovative, but the customisable interface also optimises the daily workflow, and a unique and embedded interactive scan plan, with ray-tracing capability, simulation tools and CAD import capability, consolidates your results.

The prisma ultrasonic flaw detector offers the end user, outstanding performance in the field together with the flexibility and capability to step up from using a high-end ultrasonic flaw detector to an instrument with phased array functionality. Simple controls, superior performance, advanced features and a rugged enclosure deliver simplicity, capability and reliability to the technician’s finger tips. With the best display size and resolution in it’s category, the Prisma provides the end user with an intuitive and workflow driven interface, excellent imaging capability using the Full screen mode allowing 100% of the display to be used for Scan Imaging.

The Olympus OmniScan SX is a high-performance phased array ultrasonic flaw detector, ideal for advanced NDT applications. With a high-resolution 8.4” color touchscreen, 16 channels, and a frequency range of 0.5 to 25 MHz, it ensures precise flaw detection and material assessment. It offers rapid data acquisition with a pulse repetition frequency of up to 1,000 Hz and features a 64-element phased array for superior detection.

The EPOCH 650 Digital Ultrasonic Flaw Detector combines Olympus’ industry leading conventional flaw detection capabilities with the efficiency of a highly portable, intuitive instrument. The EPOCH 650 flaw detector’s blend of efficient menus and direct access keys allows you to take advantage of the highest quality flaw detection platform with exceptional ease of use. The EPOCH 650 is designed for use in nearly any inspection environment, from bench top testing in a laboratory to extreme outdoor and hazardous conditions.

Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—the new NORTEC® 600. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600 is capable of producing highly visible and contrasting eddy current signals in any lighting condition.
The redesigned interface of the NORTEC 600 borrows the intuitive, knob-operated navigation of its NORTEC predecessors and combines it with the simple menu structure and highly efficient direct-access keys of other popular Olympus instruments.

Powerful Features Optimized for One-Handed Operation. The EPOCH 6LT portable flaw detector has a variety of standard and optional software features designed to meet a wide range of flaw detection applications. Exporting saved inspection files for reporting is easy. Send your inspection results to a removable USB memory stick in a variety of convenient file formats, such as BMP, CSV, and PDF, to quickly communicate your data. The EPOCH 6LT portable flaw detector combines the functionality of a powerful ultrasonic flaw detection device with a form factor designed to thrive in rope access and high portability applications.

Olympus Nortec 600D its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—The new NORTEC 600D. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600D is capable of producing highly visible and contrasting eddy current signals in any lighting condition.
NEW Olympus BondMaster 600 Multimode Bond Tester - B600M (BondMaster 600M)
The portable BondMaster 600 delivers a powerful combination of multimode bond testing software and highly advanced digital electronics for the nondestructive inspection of honeycomb and laminate composites and metal-to-metal bonds. or laminate composite, the BondMaster 600 offers exceptional ease-of-use thanks to its direct-access keys and streamlined interface that features convenient presets for common applications. The enhanced user interface and simplified workflow of the BondMaster 600 offers archiving and reporting that are accessible to any level of user.
USED GE Inspection Technologies USN 60 Ultrasonic Flaw Detector - Calibrated (USN 60)
The The GE Inspection Technologies USN 60 flaw detector is designed for outdoor use with two independent gates to monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications. It features pulse echo, dual, and thru-transmission test modes as well as measurement modes for zero-to-first and multi-echo with selectable flank or peak detection. This flaw detector also calculates weld ratings according to AWS specification D1.1 (formula D=A-B-C). The Square Wave Pulser mode satisfies a wide range of tough-to-penetrate applications, including composite materials. In this mode the voltage is scrollable in 10V increments from 50 to 450V. Pulse width can be adjusted in 10ns increments from 10 to 1000ns.
USED General Electric SpotChecker Weld Flaw Detector - Calibrated (SpotChecker)
SpotChecker is a hand-held flaw detector for testing spotwelds in situ on the production line. It weighs just 3.2 kg, is battery operated and is sealed to IP65. It features hot swap battery exchange to ensure continuous operation. SpotChecker does not require intensive training but offers the advantage of an “expert” system for people less qualified in weld inspection.
USED GE Inspection Technologies Mentor EM Eddy Current Flaw Detector (GE Mentor EM)
This powerful new technology makes eddy current weld inspections easier, more accurate, and faster. By allowing the workflows to be instantly accessible on the device, Mentor EM helps to ensure strict compliance with codes, guidelines, and standard practices. Remotely collaborate with experts in real time. Introducing Mentor EM for eddy current weld inspection. No knobs, dials, or switches to mistakenly adjust during use.
USED GE Inspection Krautkramer USM 25 Lemo Ultrasonic Flaw Detector (GE Inspection Krautkramer USM25)
The Instrument driver for USM 25 is required to exchange data and settings between the instrument USM 25 and the software AMPLECTOR Instrument Manager. All versions are supported USM 25, USM 25 DAC, USM 25 S, USM 25 SD and instrument options (DAC/TCG, DGS, Data Logger with 3rd gate). Instrument data supported by the Instrument driver USM 25: Instrument settings (ultrasonic parameters), A-scans, test results, and Data Recorder file types “Linear” and “Grid”.
USED GE Inspection Technologies USM 36 Ultrasonic Flaw Detector (GE USM 36)
GE Inspection Technologies USM 36 Ultrasonic Flaw Detector combines ergonomic and robust design and the biggest display screen of its class with state-of-the-art UT performance. It incorporates a range of innovative features to ensure that this new instrument is adopted as the everyday workhorse of flaw detectors by NDT inspectors globally. The Krautkramer USM 36 features a 7 inch LCD display with a of 800x480 pixel resolution.
USED GE Inspection Technologies USM 35X Ultrasonic Flaw Detector (GE USM 35X)
The latest version of the USM 35X portable ultrasonic flaw detector from GE’s Inspection Technologies business, is now totally protected against the ingress of dust and high pressure jets of water to IP 66 and contains new software which allows its operation to Japanese weld inspection standards.
The USM 35X is designed for industrial environments by weighing only 2.2 kg, having a 14 hour battery life and by having a temperature range of 0 to 60 degrees Celsius.
NEW Waygate Technologies Krautkramer USM 100 Flaw Detector (USM 100)
Sleek but rugged, the Krautkrämer USM 100 is a portable, highly versatile flaw detector with smartphone-like capabilities. Designed ergonomically for unrivaled ease of use, it features a large touch screen and buttons that allow seamless ambidextrous operation. Digital features include a best-in-class user interface that streamlines setup, training time and updates. The new standard in flaw detection. Now also available with the industry-leading features of the Pro edition.
NEW Waygate Technologies Krautkramer USN 60L Flaw Detector (Krautkramer USN 60L)
The Waygate Technologies Kraukramer USN 60L ultrasonic flaw detector series, a Baker Hughes business product (formerly GE Inspection Technologies), is optimized for use in direct sunlight and operation at extreme outdoor temperatures. These new characteristics make the instruments ideal for outdoor use, with increased long battery operation time of up to 11 hours. The USN 60L features a PRF (pulse repetition frequency) in spike mode of 15 Hz to 2 kHz. Inspect faster and detect more with ultrasonic testing solutions for every application. Increase your POD with technology designed to increase efficiency, without ever compromising accuracy.
NEW Waygate Technologies Krautkramer USM 36 Ultrasonic Flaw Detector (Krautkramer USM 36)
The Waygate Technologies Krautkramer USM 36 Ultrasonic Flaw Detector, a Baker Hughes business product (formerly GE Inspection Technologies), is the most versatile ultrasonic flaw detector on the market thanks to its ability to operate in DAC, AWS and DGS modes and with applications including weld inspections, thickness measurements, corrosion measurement, forging inspections and other inspections for difficult materials. The industries where the Waygate Technologies Krautkramer USM 36 proves useful include the automobile, power generation, petrochemical, and aerospace industries.
NEW Waygate Technologies Mentor UT Ultrasonic Phased Array Flaw Detector (Waygate Technologies Mentor UT)
The entire UT flaw detector system is housed in a glove-friendly touchscreen tablet that’s as easy to use as a smartphone. Pre-loaded Mentor Create software is fully customizable, allowing for user-defined menus and workflows (apps) for step-by-step guidance through the inspection process– from calibration to probe location to analysis. Confident and educated users mean that even the most complex inspections are performed consistently every time. Mentor UT is the first ultrasonic testing device to easily allow wireless connectivity and live streaming, so inspectors can get real-time second opinions when they need them. That same wireless cloud connectivity enables Mentor UT to remotely generate comprehensive inspection reports on users’ desktops with the click of a button.
NEW Sonatest Veo3 Phased Array - Ultrasonic Flaw Detector (Sonatest Veo3)
Sonatest's comprehensive range of portable phased array flaw detectors provide the end user with unrivalled flexibility and performance in the field of Non Destructive Flaw detection. Retaining the best features of the established Veo line, the new Veo3 now offers a PCAP touch interface, user templates, and more importantly, live TFM. The Veo3 multi-techniques allow inspectors to keep inspecting as they always have, with no need to change their current workflow and by doing so, users can benefit from the additional resolution and sizing performance of TFM while carrying out an already approved, trusted and reliable procedure.
USED GE Inspection USM / DMS Go Plus Ultrasonic Flaw Detector - Calibrated ( USM / DMS Go Plus)
GE/Waygate Technologies Krautkramer DMS Go Ultrasonic Thickness Gauges, a Baker Hughes business product (formerly GE Inspection Technologies), provide accurate, reliable, and comprehensive thickness inspection data in a wide range of applications and environments. The DMS GO features the same hardware and operating platform as the USM Go flaw detector, combining the two to offer a powerful instrument. These Gauges are lightweight, ergonomic, and IP67 rated for operating in harsh environments. The DMS Go is ideal for inspections in oil & gas, power generation, aerospace, and metals industries.
NEW Sonatest WAVE Digital Ultrasonic Flaw Detector (Sonatest WAVE)
The WAVE interactive flaw detector integrates the latest technologies available in order to create a revolution in the ultrasonic non-destructive testing equipment market. Introducing WAVE by Sonatest. It integrates the latest technologies available in order to create a revolution in the ultrasonic non-destructive testing equipment market. Not only is it innovative, but the customisable interface also optimises the daily workflow, and a unique and embedded interactive scan plan, with ray-tracing capability, simulation tools and CAD import capability, consolidates your results.
NEW Sonatest Prisma Ultrasonic Flaw Detector (Sonatest Prisma)
The prisma ultrasonic flaw detector offers the end user, outstanding performance in the field together with the flexibility and capability to step up from using a high-end ultrasonic flaw detector to an instrument with phased array functionality. Simple controls, superior performance, advanced features and a rugged enclosure deliver simplicity, capability and reliability to the technician’s finger tips. With the best display size and resolution in it’s category, the Prisma provides the end user with an intuitive and workflow driven interface, excellent imaging capability using the Full screen mode allowing 100% of the display to be used for Scan Imaging.
USED Olympus OmniScan SX Phased Array Ultrasonic Flaw Detector (OmniScan SX)
The Olympus OmniScan SX is a high-performance phased array ultrasonic flaw detector, ideal for advanced NDT applications. With a high-resolution 8.4” color touchscreen, 16 channels, and a frequency range of 0.5 to 25 MHz, it ensures precise flaw detection and material assessment. It offers rapid data acquisition with a pulse repetition frequency of up to 1,000 Hz and features a 64-element phased array for superior detection.
USED Olympus Epoch 650 Ultrasonic Flaw Detector (Epoch 650)
The EPOCH 650 Digital Ultrasonic Flaw Detector combines Olympus’ industry leading conventional flaw detection capabilities with the efficiency of a highly portable, intuitive instrument. The EPOCH 650 flaw detector’s blend of efficient menus and direct access keys allows you to take advantage of the highest quality flaw detection platform with exceptional ease of use. The EPOCH 650 is designed for use in nearly any inspection environment, from bench top testing in a laboratory to extreme outdoor and hazardous conditions.
NEW Olympus Nortec 600D Eddy Current Flaw Detector (Nortec 600D)
Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—the new NORTEC® 600. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600 is capable of producing highly visible and contrasting eddy current signals in any lighting condition.
The redesigned interface of the NORTEC 600 borrows the intuitive, knob-operated navigation of its NORTEC predecessors and combines it with the simple menu structure and highly efficient direct-access keys of other popular Olympus instruments.
NEW Olympus Epoch 6LT Portable Ultrasonic Flaw Detector (Epoch LT)
Powerful Features Optimized for One-Handed Operation. The EPOCH 6LT portable flaw detector has a variety of standard and optional software features designed to meet a wide range of flaw detection applications. Exporting saved inspection files for reporting is easy. Send your inspection results to a removable USB memory stick in a variety of convenient file formats, such as BMP, CSV, and PDF, to quickly communicate your data. The EPOCH 6LT portable flaw detector combines the functionality of a powerful ultrasonic flaw detection device with a form factor designed to thrive in rope access and high portability applications.
USED Olympus Nortec 600D Eddy Current Flaw Detector (Nortec 600D)
Olympus Nortec 600D its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—The new NORTEC 600D. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600D is capable of producing highly visible and contrasting eddy current signals in any lighting condition.