ACES SYSTEM

Viper II Vibration Analyzer & Balancer

Transient Fan/Turbine Balance
Transient Vibration Survey
Fan Blade Mapper
TFE 731 Performance

The Viper II Vibration Analyzer is a versatile yet compact instrument that combines all of the diverse technologies required for high-end jet engine vibration analysis, transient balance, rotor track and balance, fan trim balance, propeller balance and acoustic analysis into one tool. All of these maintenance functions can be easily performed on virtually any airframe and/or engine type using the VIPER II.

TRANSIENT VIBRATION ANALYSIS
Accurate High-Speed Run-up & Coast-Down Transient Surveys
At approximately 6.0 pounds, powered by an internal battery and using minimal cabling, the VIPER II delivers vibration analysis at speed and accuracy levels typically available only in manufacturer test cells.

TRACK & BALANCE
Quick, Automated Track & Balance Solutions
The compact VIPER II provides accurate solutions in the minimum number of runs, saving costly run time and fuel. Setups are entered into the analyzer which can be customized by the user to accommodate virtually any engine and airframe type.

TRANSIENT FAN/TURBINE BALANCE
Save Time and Money by Collecting Data in a Single Sweep
Transient Balance is a method of collecting vibration data at all engine speeds during a balance run, eliminating the need to manually select and dwell at specific speeds. This is one of the most innovative features of the VIPER II, and it maximizes testing efficiency.

FEATURES :

Transient Balance yields test cell quality balancing results
Direct PDF report generation onto a USB flash drive
eSetups eliminate the need for charts
SmartTach speed and phase processing allows direct measurement of the engine speed signal
Four-channel simultaneous data acquisition (10 spectra/second/channel) for striking speed and accuracy
Multiple speed inputs for multiple rotor speed tracking during transient analysis
Multiple USB ports for direct connection to peripherals.

APPLICATIONS :

Transient Balance
Propeller Balance
Rotor Track & Balance
Fan Trim Balance
Vibration & Acoustic Analysis

SPECS :

Vibration Input
9.5V Pk-Pk, 0 to 240 IPS Peak with 20 mV per IPS sensor

Sensor Types
Accepts any vibration signal input (acceleration, velocity, displacement) and any voltage generating sensor.  External charge amplifier required for charge mode.

Vibration Amplitude Accuracy
±1% across frequency range

Frequency Range
selectable up to 30kHz (1,800,000 RPM)

Tachometer Inputs
Better than 1 degree phase accuracy 60 to 60,000 RPM

Display
7″ Day/Night Readable Color LCD Display with Superbright LED Backlight

Memory
1 GB Flash

Dimensions
10.5 inches wide, 9.75 inches long, 5 inches deep

Weight
Approximately 6.0 pounds (2.8 kilos)

Power Requirements
Smart Li-Ion Battery (Internal), 87 Wh

Operating Time
8.0 hours

Charging Time
3.0 Hours (approximately)

Vibration Channels
4 ea.

Tach / Mag Pickup
4 ea.
Trax Optical Tracker
1 ea.

Strobe
1 ea.

USB Port
2 ea.

Phase Accuracy
<1°

Balance Frequency
60-60,000RPM,± 0.2%

Vibration Freq Range
0-30 kHz

Vibration Amplitude
0-240 IPS (peak), 20 mV / IPS

Dynamic Range
98dB

Operating Temperature
-4° to 120° F (-20° to 49°C)

Relative Humidity
10-85% (non-condensing)

AC Input
The data acquisition system is capable of measuring AC values to 9.5V Peak-Peak.

Sensor Types
The analyzer will accept any vibration signal input (acceleration, velocity, or displacement.) The input is then displayed as collected or integrated to any other vibration unit. The vibration input will accept any voltage -generating sensor (must have external charge converter when in charge mode) and will supply power to the sensor when required. The Cobra II only accepts acceleration or velocity inputs.

Analysis Range
Anti-aliasing filters are used with a Fast Fourier Transform (FFT) to accurately transform data from the time to the frequency domain. The analyzer will perform FFT resolutions of 100, 200, 400, 800, 1600, and 3200 lines.

Also you can check product : NEW Viper 2E Vibration Analyzer - Balancer - 4 Channel Analyzer

Viper 2E Vibration Analyzer & Balancer 4-CHANNEL ANALYZER

The Viper 2E Vibration and Performance Analyzer is a compact instrument with all the power of the Viper and Viper 2 platforms. Designed for the harshest of environments with EMI Shielding and new cabling. Vibration and Acoustic Analysis on Jet Engines and Airframes, Transient Balance, Fan Trim Balance, and even Propeller Balance features are ready to go anywhere you are.

TRANSIENT VIBRATION ANALYSIS
Accurate High-Speed Acceleration and/or Deceleration Transient Surveys

Powered by an internal battery and using minimal cabling, the V2E delivers vibration analysis at speed and accuracy levels typically available only in manufacturer test cells.

TRANSIENT BALANCE
Save Time and Money by Collecting Data in a Single Sweep

Transient Balance makes it possible to balance the engine from Idle to Max Power, instead of focusing only on single speed points. Test Cell quality balances on wing are possible.

MIL-SPEC DESIGN
Ensure Reliability of Measurements in Harsh Environments

Designed for MIL-PRF-28800F Class 2, the V2E protects from EMI, dust, water, and impacts faced in rugged, harsh environments. All cables have been built to MIL-SPEC standards which includes EMI hardening and longer durability.

FEATURES :

Transient Balance yields test cell quality balancing results on-wing
Direct PDF report generation to provide an easy summary of maintenance actions
.CSV export of raw data for further analysis
SmartTach speed and phase processing allows direct measurement of the engine speed signal
Four-channel simultaneous data acquisition (10 spectra/second/channel) for striking speed and accuracy
Mil-Spec USB port for secure connection to encrypted Spindle Drives
Housed in ZERO case for maximum environmental protection.

APPLICATIONS :

Transient Balance
Propeller Balance
Fan Trim Balance
Vibration & Acoustic Analysis
Rotor Track and Balance

SPECS :

Vibration Input
9.5V Pk-Pk, 0 to 240 IPS Peak with 20 mV per IPS sensor

Sensor Types
Accepts any vibration signal input (acceleration, velocity, displacement, acoustic, and strain) and any voltage generating sensor.

Vibration Amplitude Accuracy
±1% across frequency range

Frequency Range
Selectable up to 30kHz (1,800,000 RPM)

Tachometer Inputs
Better than 1° phase accuracy 60 to 60,000 RPM

Display
7″ Day/Night Readable Color LCD Display with Super-bright LED Backlight

Power
Smart Li-Ion Battery with 8-hour operating time

Memory
1 GB flash

Operating Temperature
-20° to 49° C (-4° to 120° F)

Relative Humidity
10-85% (non-condensing)

Storage
-20° to 60° C (-4° to 140° F)

Dimensions (L*W*H)
12″ x 9″ x 5″

Weight:
9.0 lbs (4.1 kg)

Also you can check product : NEW ACES System Viper II Vibration Analyzer and Balancer

2-Channel Vibration & Balancing Analyzer

The COBRA II dual channel vibration analyzer is a versatile yet compact instrument that combines all of the diverse technologies required for high-end engine vibration analysis, rotor track and balance, and propeller balance into one tool. With the Cobra II, all of these maintenance functions can be easily performed on virtually any airframe and engine type, such as a 2-propeller airplane.

LARGE FULL-COLOR SCREEN
The COBRA II has a large, high-resolution, transmissive, full-color display with a super-bright LED backlight that can be easily viewed in direct sunlight.

PDF REPORTING
Generate PDF reports directly from the analyzer and store on a USB flash drive to be printed or saved in a separate location to retain accurate maintenance records.

PORTABLE CONVENIENCE
Data storage, transfer, display and analysis is independent of any proprietary software and a PC interface. Application notes and eSetups are now available to download directly to the analyzer via the web.

SOLUTIONS GENERATED
The compact COBRA II dual channel analyzer provides accurate solutions in the minimum number of runs, saving costly run time and fuel. Our solutions are extremely valuable tools that are not offered in similar vibration analysis and balancing instruments as a standard feature for this market.

FEATURES :

Large full-color screen
PDF Reporting
Portable Convenience
Solutions Generated
Industry-Unique, no-cost, 5-year warranty

APPLICATIONS :

Propeller Balance
Main Rotor Track & Balance
Tail Rotor Balance
Overall Vibration Survey
Vibration Spectrum Survey

SPECS :

Vibration Input
9.5V Pk-Pk, 0 to 240 IPS Peak with 20 mV per IPS sensor

Sensor Types
Accepts any vibration signal input (acceleration, velocity, displacement) and any voltage generating sensor.  External charge amplifier required for charge mode.

Vibration Amplitude Accuracy
±1% across frequency range

Frequency Range
selectable up to 30kHz (1,800,000 RPM)

Tachometer Inputs
Better than 1 degree phase accuracy 60 to 10,000 RPM

Display
7″ Day/Night Readable Color LCD Display with Superbright LED Backlight

Memory
1 GB Flash

Dimensions
10.5 inches wide, 9.75 inches long, 5 inches deep

Weight
Approximately 6.0 pounds (2.8 kilos)

Power Requirements
Smart Li-Ion Battery (Internal), 87 Wh

Operating Time
8.0 hours

Charging Time
3.0 Hours (approximately)

Vibration Channels
2 ea.

Tach / Mag Pickup
2 ea.

Trax Optical Tracke
1 ea.

Strobe
1 ea.

USB Port
2 ea.

Phase Accuracy
<1°

Balance Frequency
60-10,000 RPM,± 0.2%

Vibration Freq Range
0-30 kHz

Vibration Amplitude
0-240 IPS (peak), 20 mV / IPS

Dynamic Range
98dB

Operating Temperature
-4° to 120° F (-20° to 49°C)

Relative Humidity
10-85% (non-condensing)

AC Input
The data acquisition system is capable of measuring AC values to 9.5V Peak-Peak.

Sensor Types
The analyzer will accept any vibration signal input (acceleration, velocity, or displacement.) The input is then displayed as collected or integrated to any other vibration unit. The vibration input will accept any voltage -generating sensor (must have external charge converter when in charge mode) and will supply power to the sensor when required. The Cobra II only accepts acceleration or velocity inputs.

Analysis Range
Anti-aliasing filters are used with a Fast Fourier Transform (FFT) to accurately transform data from the time to the frequency domain. The analyzer will perform FFT resolutions of 100, 200, 400, 800, 1600, and 3200 lines.

Also you can check product : NEW ACES System Viper II Vibration Analyzer and Balancer

Increase your plane or helicopter’s performance today with the ACES Systems ProBalancer Analyzer.

For those who need a little more horsepower than the ProBalancer Sport, we offer the Model 2020PL ProBalancer Vibration Analyzer Balancer. It provides step-by-step on-screen instructions for performing propeller balancing, rotor track and balance measurements and vibration surveys at an affordable price.

APPLICATIONS:

Dynamic Propeller Balance
Rotor Track & Balance
Vibration Surveys

BENEFITS OF BALANCING INCLUDE:
Reduce Component Wear
Increase Aircraft Performance
Reduce Crew Fatigue
Increase Safety

THE MODEL 2020 PL PROBALANCER FEATURES:
One-shot balancing
Automated weight placement solutions
Stores reusable setups
Graphic spectral display with curser and backlit LED screen
Dual channel, expanded views and simultaneous inputs
Supports multiple sensor types
Includes an industry-unique 5-year warranty

The ACES 2020 ProBalancer Kit includes all the vibration analyzing and balancing equipment required to improve the performance of your helicopter or plane. Contact our sales team today for a quote on our high-performance ACES propeller balancer.

FEATURES :

Graphic spectral display with cursor, expanded views, and backlighting
Dual channel, simultaneous inputs
Maintains prior influences to compute one-shot balance
Programmable propeller balance influences
Split weights to existing holes (available with EPS)
Supports multiple sensor types
Powered by rechargeable battery or ship’s power
Guaranteed reliability with an industry-unique FREE 5-year warranty on workmanship and materials

SPECS :

Accuracy
Vibration Amplitude: ± 5%, 0-10 IPS Frequency Range: 0-12 KHz (720,000 RPM) per channel when collecting on both channels simultaneously OR 0-20 KHz (1,200,000 RPM) when collecting on a single channel Tachometer Inputs: ± 0.3%, 100-10,000 rpm

Power Supply
Type: Nickel Metal Hydride (NiMH) 12V, 4.5 Amp-hour internal Operation Time: 10 – 12 hours (optimum) Charging Time: 2 hours

Voltage
12 V DC Battery or 14-28 V DC ship’s power

Physical
Height: 9.3 inches Width: 7.5 inches Depth: 4.4 inches Weight: 4.8 lbs. Operating Temperature: 0 to 50C
AC Input
The data acquisition system is capable of measuring AC values from 0.1 volt to 2.048 volts peak

Tachometer- Synchronized Measurements
The analyzer can use the tachometer input to synchronously sample and average data. These data contain phase information for vibration related to the tachometer. The analyzer can report phase to ±3 degrees for this vibration, which is reproducible to 1 degree.

Unconditioned Tachometer Input
Tachometer signal processing electronics are capable of adjusting the full-scale input range to handle any available sensor for measuring speed. Adjustment of the tachometer conditioning electronics is performed automatically by the microprocessor and requires no user intervention. The voltage level that is used as a reference for detection of the start of the revolution can be adjusted from 120mV to 5 volts. The tachometer circuitry can detect speeds up to 10.000 RPM.

Auto-ranging Input
The analyzer auto-ranges all signal inputs based on sensor sensitivity. That way, it can determine the optimum gain setting to achieve the maximum dynamic range. Gains are adjusted by factors of two (1 to 512) for all channels. This adjustment enables the analyzer to perform each measurement without overload and with maximum accuracy.

Sensor Types
The analyzer will accept any vibration signal input (acceleration, velocity, or displacement). The input is then displayed as collected or integrated to another vibration unit. The vibration input will accept any voltage-generating sensor (must have external charge converter when required).

Analysis Range
Data is accurately transformed from the time to frequency domain using a high roll-off, 8-pole elliptical, anti-aliasing filter with a Fast Fourier Transformer (FFT). The analyzer will perform FFT resolutions of 100, 200, 400, and 800 lines.

Also you can check product : NEW ACES System Cobra II 2-Channel Vibration and Balancing Analyzer