The ROTALIGN touch is the most powerful laser shaft alignment platform on the market. The ROTALIGN touch truly is unique. Let's find out how the leading laser shaft alignment system delivers the best measurement accuracy while offering the most innovative features that save you time and effort.

Features:

Intelligent measurement modes including uncoupled intelliPASS and intelliPOINT
Cardan shaft alignment with cardan in place
Vertical machine alignment with vertiSWEEP continuous measurement mode
Softfoot diagnostics
Live Trend
Horizontal and Vertical move simulator
Measurement table including different alignment jobs
Machine train with real 3D machines
Real time Intelligent measurement quality
Customized tolerances (even asymetrical)

SPECS :

CPU
Processor: 1.0 GHz quad core ARM®Cortex-A9
Memory: 2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory

Display
Technology: Projective capacitive multi-touch screen
Type: Transmissive (sunlight-readable) backlit TFT color graphic display Optically bonded, protective industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel Dimensions: 178 mm (7”) diagonal

LED indicators
3 LEDs for battery status, 1 LED for WiFi communication

Power supply
Operating time: 12 hours typical use (based upon an operating cycle of 25% measurement, 25% computation, 50% ‘sleep’ mode)
Battery: Lithium-ion rechargeable battery 3.6 V / 80 Wh AC adapter/charger: 12 V / 36 W; standard barrel connector (5.5 x 2.1 x 11 mm)

External interface
USB host for memory stick USB slave for PC communication, charging (5 V DC / 1.5 A) RS-232 (serial) for sensor, RS-485 (serial) for sensor I-Data for sensor Integrated Bluetooth® wireless communication (covers direct line of sight distances of up to 30 m / 100 ft depending on the prevailing envir-onmental conditions) Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps (depending on configuration) Integrated RFID with read and write capabilities (depending on con-figuration)

Environmental protection
IP 65 (dustproof and water jets resistant) – as defined in regulation DIN EN 60529 (VDE 0470-1), shockproof Relative humidity: 10% to 90%

Drop test
1 m (3 1/4 ft)

Temperature range
Operation: 0°C to 40°C (32°F to 104°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 50°C (14°F to 122°F)

Dimensions
Approx. 273 x 181 x 56 mm (10 3/4” x 7 1/8” x 2 3/16”)

Weight
Approx. 1.88 kg (4.1 lbs)

Camera
5 MP built-in (depending on configuration) LEDs: Risk Group 1 according to IEC 62471:2006

CE conformity
Refer to the CE compliance certificate in www.pruftechnik.com

FCC compliance
Requirements fulfilled (refer to the provided document ‘Safety and gen-eral information’)

INCLUDED :

Pruftechnik Rotalign Touch Laser Shaft Alignment System (BC# -L/T*)
Rotalign SensALIGN Laser
Rotalign SensALIGN Receiver
(2) Chain Brackets
Tape Measurer
Carrying Case (G)
MEMS inclinometers

Also you can check product : USED Pruftechnik Rotalign Ultra IS Laser Shaft Alignment System

PRÜFTECHNIK have created the Optalign Smart EX  for industrial applications. The intrinsically safe laser shaft alignment equipment can be used in  extreme working conditions. Optalign Smart EX is a sought after measurment system for the maintenance of gear boxes, pump, motors and a variety of rotating machinery for intrinsically safe areas. The light weight machine with Bluetooth capabilites makes the perfect solution for your intrinsically safe laser alignment needs.

System and case fully ATEX / IECEX certified
Alignment of horizontal, vertical and flange-mounted machines, coupled and uncoupled shafts
Hundreds of positions are automatically measured during shaft rotation (SWEEP)
Automatic evaluation of alignment condition with smiley symbols (TolCheck) and user-defined tolerances
Live monitoring of horizontal and vertical machine corrections
Save PDF measurement reports directly to a USB stick: no PC required.
Wireless data transfer via Bluetooth module (optional).

SPECS :

Computer

CPU
Marvell PXA270 running at 312 MHz

Memory
64 MB RAM, 32 MB Flash

Display
Type: TFT, transflective (sunlight-readable), 65 535 colours,backlit LED
Resolution: 320 x 240 Pixel; Dimensions: 3.5 inch diagonal
Keyboard elements: Navigation cursor cross with up, clear and menu keys; Alphanumeric keyboard with dimensions,measure and results hard keys

LED indicators
4 LEDs for laser status and alignment condition
2 LEDs for wireless communication and battery status

Power supply
Operating time: 18 hours typical use
(based upon an operating cycle of 25% measurement, 25% computation and 50% ‘sleep’ mode)
Disposable batteries: 6 x 1.5 V IEC LR6 (“AA“)
1.5 V “AA” MN 1500 from Duracell or AccuCell AC 1800 rechargeable batteries

External interface
USB host
USB slave
RS232 (serial) for transducer
Integrated wireless communication, class 1, transmitting power 100 mW
AC adapter/charger socket

Environmental protection
IP 65 (dustproof and water spray resistant), shockproof
Relative humidity 10% to 90%

Intrinsic safety
II 2 G Ex ib [ib] IIC T4, Zone 1
Certificate numbers: TÜV 08 ATEX 554162, IECEx TUN 08.0006

Temperature range
Operation: -10°C to 50°C [14°F to 122°F]
Storage: -20°C to 60°C [-4°F to 140°F]

Dimension
Approx. 214 x 116 x 64 mm [8 7/16” x 2 1/2”]

Weight
865 g [1.9 lb]

CE conformity
EC guidelines for electric devices (2004/108 EWG) are fulfilled

Transducer

Particulars Measurement principle: Coaxial, reflected laser beam
Environmental protection: IP 67 (submersible, dustproof)
Ambient light protection: yes
Storage temperature: -20°C to 80°C [-4°F to 176°F]
Operating temperature: 0°C to 55°C [32°F to 131°F]
Dimensions: approx.
107 x 70 x 49 mm [4 1/4” x 2 3/4” x 2”]
Weight: approx. 177 g [6 1/2 oz.]

Intrinsic safety
II 2 G Ex ib op isb IIC T4, Zone 1
Certificate numbers:TÜV 07 ATEX 554148, IECEx TUN 08.0003

Laser
Type: Ga-Al-As semiconductor laser
Wavelength (typical) 675 nm (red, visible)
Safety class: Class 2, FDA 21 CFR 1000 and 1040
Beam power: < 1 mW
Safety precautions: Do not look into laser beam

Detector
Measurement area: unlimited, dynamically extendible
(U.S. Patent 6,040,903)
Resolution: 1 µm; Accuracy (avg): > 98%

Inclinometer
Measurement range: 0° to 360°; Resolution: <1°

Reflector

Type: 90° roof prism; Accuracy (avg): > 99%
Environmental protection: IP 67 (submersible, dustproof)
Storage temperature: -20°C to 80°C [-4°F to 176°F]
Operating temperature: -20°C to 60°C [-4°F to 140°F]
Dimensions: approx. 100 x 41 x 35 mm
[4” x 1 5/8” x 1 3/8”]
Weight: approx. 65 g [2 1/2 oz.]

Carrying case

Standard: ABS, drop tested 2 m [6 1/2 ft])
Case dimensions: approx. 470 x 400 x 195 mm
[18 1/2” x 15 3/4” x 7 3/4”]
Weight, including all standard parts:
approx. 5.8 kg [12.8 lb]

Wireless technology

For wireless communication
with transducer (optional)
Class 1 connectivity, transmitting power 100 mW
Transmission distance: 10 m [33 ft.]
Complies with FCC rules part 15.247

Also you can check product : USED Pruftechnik Rotalign Ultra IS Laser Shaft Alignment System

Pruftechnik Rotalign Touch Shaft Alignment System

ROTALIGN touch is the first cloud-enabled touchscreen laser shaft alignment system with integrated mobile connectivity.

With ROTALIGN touch, alignment trend is fully integrated into your asset management and condition-based maintenance programs.

Maintenance and Reliability managers can remotely prepare alignment jobs in the alignment software and connect to the Cloud to transfer them to a ROTALIGN touch device, anywhere in the world. Alignment technicians receive alignment jobs directly on their ROTALIGN touch device. Once completed, the jobs can be uploaded wirelessly back to the Cloud.

A direct connection from the ROTALIGN touch to the alignment software is also possible.

Built-in RFID machine identification and asset-specific jobs make it possible to track the alignment condition of individual assets over time. The alignment trend provides meaningful information and can be used as a condition monitoring parameter to diagnose machine condition even more accurately.

With the onboard camera alignment reports can easily be supplemented with pictures for easier knowledge transfer.

Intelligent features for shaft alignment - 100% Precision - 0% Error

The unique intelliSWEEP® sensor technology enables continuous measurements and real-time quality for precise, accurate and repeatable results. The intelliSWEEP® HD measurement mode automatically detects and eliminates sources of measurement errors such as coupling play, rotational angle or environmental vibration.

As shaft rotates, hundreds of real measurement points are taken automatically. The results are far more accurate than those based on 3 measurement positions.

Features:

Intelligent measurement modes including uncoupled intelliPASS and intelliPOINT
Cardan shaft alignment with cardan in place
Vertical machine alignment with vertiSWEEP continuous measurement mode
Softfoot diagnostics
Live Trend
Horizontal and Vertical move simulator
Measurement table including different alignment jobs
Machine train with real 3D machines
Real time Intelligent measurement quality
Customized tolerances (even asymetrical)

Specifications:

CPU
Processor: 1.0 GHz quad core ARM®Cortex-A9
Memory: 2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory

Display
Technology: Projective capacitive multi-touch screen
Type: Transmissive (sunlight-readable) backlit TFT color graphic display Optically bonded, protective industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel Dimensions: 178 mm (7”) diagonal

LED indicators
3 LEDs for battery status, 1 LED for WiFi communication

Power supply
Operating time: 12 hours typical use (based upon an operating cycle of 25% measurement, 25% computation, 50% ‘sleep’ mode)
Battery: Lithium-ion rechargeable battery 3.6 V / 80 Wh AC adapter/charger: 12 V / 36 W; standard barrel connector (5.5 x 2.1 x 11 mm)

External interface
USB host for memory stick USB slave for PC communication, charging (5 V DC / 1.5 A) RS-232 (serial) for sensor, RS-485 (serial) for sensor I-Data for sensor Integrated Bluetooth® wireless communication (covers direct line of sight distances of up to 30 m / 100 ft depending on the prevailing envir-onmental conditions) Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps (depending on configuration) Integrated RFID with read and write capabilities (depending on con-figuration)

Environmental protection
IP 65 (dustproof and water jets resistant) – as defined in regulation DIN EN 60529 (VDE 0470-1), shockproof Relative humidity: 10% to 90%

Drop test
1 m (3 1/4 ft)

Temperature range
Operation: 0°C to 40°C (32°F to 104°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 50°C (14°F to 122°F)

Dimensions
Approx. 273 x 181 x 56 mm (10 3/4” x 7 1/8” x 2 3/16”)

Weight
Approx. 1.88 kg (4.1 lbs)

Camera
5 MP built-in (depending on configuration) LEDs: Risk Group 1 according to IEC 62471:2006
CE conformity    Refer to the CE compliance certificate in pruftechnik

FCC compliance
Requirements fulfilled (refer to the provided document ‘Safety and gen-eral information’)

INCLUDED : 

Pruftechnik Rotalign Touch Laser Shaft Alignment System (BC# -L/T*)
Rotalign SensALIGN Laser
Rotalign SensALIGN Receiver
(2) Chain Brackets
Tape Measurer
Carrying Case (G)

Also you can check product : USED Pruftechnik Optalign Smart EX Laser Shaft Alignment

Pruftechnik Shaftalign Touch Laser Shaft Alignment System

A new standard for affordable laser alignment

The new ShaftAlign Touch is a rugged laser alignment system that provides digital, cloud, and other advancements over the decades-old but still widely used dial indicator and feeler gauge.

ShaftAlign Touch is a combination of software and hardware innovations enabling maintenance teams to address a wide variety of alignment challenges that basic laser alignment systems cannot handle.

It also delivers premium Adaptive Alignment capabilities that, until now, were not available in an entry-level system.

Two innovations – single-laser technology and Active Situational Intelligence – differentiate ShaftAlign Touch from the competition.

Together, they deliver the “magic” that enables Prüftechnik alignment products to automatically adapt – in real time, as alignment jobs are finished – to the asset, the situation, and the user's experience level.

Step up to the high precision and intelligence built into the ShaftAlign Touch: eliminate the time, rework, and guessing common to other approaches. Get more done while enabling your machines to operate at peak performance.

Fast, easy, and precise alignment that adapts to your needs

Single-laser technology

Active Situational Intelligence

Work faster without sacrificing precision

Freeze-Frame Measurement

Real-Time Measurement Quality Enhancement

Instant collaboration via the cloud

Rugged interface with the highest IP rating in its class

Up to 8 measurement points for more precise alignment of vertical machines

SHAFTALIGN touch by PRUFTECHNIK

Adaptive Alignment Advances

ShaftAlign Touch uses single-laser technology and Active Situational Intelligence to adapt to the asset, the situation, and the maintenance team, aligning standard rotating assets with new levels of precision and speed.

Key benefits at a glance

- High performance and precise results
The new ShaftAlign® Touch leverages single-laser technology to
provide high-precision, high-performance alignment measurements.
- Quick setup and intuitive user interface
Its quickly mounted setup and tablet-like, intuitive guided user
interface make the ShaftAlign® Touch more user-friendly than any of
the conventional measurement methods.
- Share data via the cloud
You can leverage its integrated WiFi cloud solution to easily transfer
measurement data from the ShaftAlign® Touch handheld device to the
ARC 4.0 software.

General specifications

CPU
Processor: Exynos 9810, 2.7GHz,1.7GHz Octa-Core
Memory: 4 GB RAM, 64 GB Flash memory

Display
Technology: TFT
Integrated light sensor for automated adjustment
of the brightness to the display according to the
lighting conditions hence extending battery life
Resolution: 1920 x 1200 Pixel
Size: 203.1 mm (8”)

Connectivity
Wi-Fi: 802.11 a/b/g/n/ac/ax 2.4G 5GHz, HE80, MIMO,
1024-QAM
Wireless: 5.0
RFID: NFC

Camera
Main Camera -
Resolution: 13.0 MP, Auto Focus
Front Camera -Resolution: 5.0 MP

Environmental protection
IP 68: dustproof, submersible 1.5 m

Temperature range
Operation: -20°C to 50°C (-4°F to 122°F)

Battery
Type: Li-Ion rechargeable battery 3.8 V / 5050 mAh /
19.2 Wh
Operating time: Up to 11 hours

Dimensions (without hand straps)
Approx. 256 x 149 x 35 mm
(10 5/64” x 5 55/64” x 1 3/8”)

Weight (without hand straps)
Approx. 710 g (1.6 lbs)

Reflector (prism)

General specifications

Type
90° roof prism

Accuracy
(avg) > 99%

Environmental protection
IP 67 (submersible, dustproof)

Temperature range
Operation: -20°C to 60°C (-4°F to 140°F)
Storage: -20°C to 80°C (-4°F to 176°F)

Dimensions
Approx. 100 x 41 x 35 mm (4” x 1 5/8”
x 1 3/8”)

Weight
Approx. 65 g (2.3 oz)

sensALIGN 3 sensor

General specifications

Measurement principle
Coaxial, reflected laser beam

LED indicators
1 LED for laser beam status and battery status
1 LED for Wireless communication

Power supply
Battery: Lithium-Ion rechargeable battery 3.7 V/ 5 Wh
Operating time: 10 hours (continuous use)
Charging time: Using charger – 2.5 h for up to 90%
3.5 h for up to 100%
Using USB port – 3 h for up to 90%
4 h for up to 100%

Environmental protection
IP 65: Dustproof and water jets resistant,
shockproof
Relative humidity: 10% to 90% (non-condensing)

Ambient light protection
Yes

Temperature range
Operation: -10°C to 50°C (14°F to 122°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -20°C to 60°C (-4°F to 140°F)

Dimensions
Approx. 105 x 69 x 55 mm
(4 9/64” x 2 23/32” x 2 11/64”)

Weight
Approx. 210 g (7.4 oz) with dust cap

Detector
Measurement range: Unlimited, dynamically extendible
Resolution: 1 μm (0.04 mil) and angular 10 μRad
Error (avg): < 2%

Inclinometer
Measurement range: 0° to 360°
Resolution: 0.1°
Inclinometer error: 0.3% full scale

Laser
Type: Semiconductor laser diode
Wavelength: 630 - 680 nm (red, visible)
Safety class: Class 2 according to IEC 60825-1:2014
The laser complies with 21 CFR 1040.10
and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated
June 24, 2007.
Beam power: < 1 mW
Beam divergence: < 0.3 mrad
Safety precautions: Do not look into laser beam

External interface
Wireless communication

Transmission distance
Up to 30 m (98 ft) direct line of sight

Country radio certifications
Approvals granted for specific regions
(refer to the provided ‘Safety and general
information’ document)

Also you can check product : NEW Pruftechnik OPTALIGN Touch Laser Shaft Alignment SYstem

The OPTALIGN Touch by PRÜFTECHNIK is a touch screen device used to control and read data from the PRUFTECHNIK senseALIGN and infiniRange systems and it was designed by some of the world’s leading alignment experts to solve problems in the easiest way possible.

The sensALIGN® technology is based on the inherent PRÜFTECHNIK single laser technology, providing highly accurate measurement results, as well as the easiest mounting and measuring in the field. sensALIGN® sensors include two HD large position sensitive detectors (PSD) and MEMS inclinometers, whilst also connecting wirelessly to the device via Bluetooth®.

Combined with the detector extension capability InfiniRange®, there is no need for pre-alignment as it is always possible to measure the initial alignment condition, no matter how big the misalignment is. The live corrections of the machine can also be started at any sensor clock position after the measurement shaft rotation.

This touch screen device is made for maximum durability. Not only it is waterproof and dust-proof according to IP65, but it is also shock-proof, oil, dirt and scratch resistant.

FEATURES :

User-friendly interface that guides users on how to measure and align machinery
Single laser technology provides highly accurate measurements every time
Allows simultaneous real-time machine corrections in both horizontal and vertical directions
Automatic collection of alignment data during shaft rotation
WiFi and Bluetooth connectivity for easy measurement sharing and team collaboration
Covered by Fluke Reliability Extended Warranty Program

SPECS :

CPU
1.0 GHz quad core ARM Cortex-A9

Memory Memory
2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory

Display
Projective capacitive multi-touchscreen
Transmissive (sunlight-readable) backlit TFT color graphic display; optically bonded, protective
industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel
Dimensions: 178 mm (7”) diagonal

LED indicators
3 LEDs for battery status
1 LED for WiFi communication

Power supply
Lithium-ion rechargeable battery 3.6 V / 80 Wh
12 hours typical use*
AC adapter/charger: 12 V / 36 W; standard barrel connector
*(based upon an operating cycle of 25% measurement, 25% computation, 50% 'sleep' mode)

External
interface USB host for memory stick
USB slave for PC communication, charging (5 V DC / 1.5 A)
RS-232 (serial) for sensor, RS-485 (serial) for sensor, I-Data for sensor,
Bluetooth, WiFi, RFID integrated
Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps

Camera
5 MP

Environmental protection
IP 65 (dustproof and water jets resistant)
Shockproof
Relative humidity: 10% to 90%

Drop test
1 m (3 1/4 ft)

Temperature range
Operation / Charging: 0 °C to 40 °C (32 °F to 104 °F)
Storage: -10 °C to 50 °C (14 °F to 122 °F)

Dimensions
Approx. 273 x 181 x 56 mm (10 3/4" x 7 1/8" x 2 3/16")

Weight
Approx. 1.88 kg (4.1 lbs)

Also you can check product : NEW Pruftechnik Shaftalign Touch Laser Shaft Alignment System

The only adaptive laser shaft alignment system for EX areas

Intrinsically safe
ATEX/IECEx Zone 1 certified. Avoid 'hot work permits' and save time.

Adaptability saves time and effort
Rugged tablet with touch screen, Active Situational Intelligence, integrated Wi-Fi, Bluetooth, RFID and camera

Best measurement accuracy and repeatability
Unique sensALIGN 5 single-laser technology offers repeatable high precision and adapts to any situation

Fluke Reliability Extended Warranty Program
NEW: The Fluke Reliability Extended Warranty Program now covers the ROTALIGN Touch EX and offers you peace of mind, convenience, device accuracy, and savings on service costs via:
Extending the manufacturer’s warranty from 2 to 5 years

Three free calibrations:
Calibrations for extended warranty customers are prioritized!
No risk of calibration price increase (the price of your 3 calibrations are locked in with purchase of the extended warranty)

A 15% discount on equipment repairs (not covered by the manufacturer’s warranty)

Adaptive alignment features when working in dangerous areas

ATEX/IECEx Zone 1 certified including ruggedized IP68 tablet device

Single-laser technology sensALIGN 5 featuring SWEEP and PASS Mode for uncoupled shafts

Active Situational Intellgence

Simultaneous Horizontal and Vertical Live Move Move Simulator

Thermal growth and targets

Spacer coupling and in-situ Cardan shaft alignment with rotating arm bracket

Soft Foot Wizard to diagnose soft foot problems

6-machine train alignment

Advanced vertical machine alignment with vertiSWEEP continuous measurement mode

ALIGNMENT RELIABILITY CENTER 4.0 PC software including auto-activation and PDF reporting

Mobile connectivity with integrated Wi-Fi, Bluetooth, RFID and camera


Advanced laser shaft alignment in EX/ATEX areas

ROTALIGN touch EX is Zone 1 ATEX/IECEX certified. Packed with user-friendly alignment features unique to PRUFTECHNIK, the ROTALIGN touch EX shortens the measurement time with:

Continuous SWEEP Mode for high-quality measurement in only one shaft rotation

Live Move function for simultaneous real-time machine corrections in both horizontal and vertical directions

vertiSWEEP to measure vertical machines in one rotation of the shaft

Cardan shaft rotating-arm bracket allows measurements to be performed without removing the shaft

Soft Foot Wizard to diagnose soft foot problems

Move Simulator lets the operator simulate shim values and horizontal corrections before moving the machine

Have instant access to the critical data you need with full mobile connectivity. The ROTALIGN touch EX tablet is Wi-Fi enabled and equipped with a Bluetooth module, an integrated camera, and an RFID reader for automatic machine identification and error-free two-way transfer of asset data.

Direct communication between the tablet and the ALIGNMENT RELIABILITY CENTER 4.0 PC software allows specialists to archive, analyze, and process alignment data to improve asset performance improvement and reliability.

Technology 

sensALIGN 5

sensALIGN Series technology is based on PRUFTECHNIK single-laser technology and provides highly precise measurement results with the easiest mounting and measuring in the field.

sensALIGN 5 sensors include two HD large position-sensitive detectors (PSD) and MEMS inclinometers. Combined with detector extension capability (InfiniRange), it is always possible to measure and document the initial alignment condition, no matter how big the misalignment.

The technology also allows the simultaneous monitoring of machine corrections in vertical and horizontal directions, starting from any angular position where the sensor comes to stop.

General specifications

CPU
Exynos 7 Octa, 1.6GHz Octa-Core (Cortex-A53)

Memory
3 GB RAM, 16 GB Flash memory

Display
8“ TFT, 1280 x 800 pixels

Connectivity
Wi-Fi 802.11 a/b/g/n/ac (2.4GHz 5GHz)
Bluetooth 4.2
RFID

Cameras
8 MP AF 5 MP

IP
Rating IP 68

Operating temperature
-20 ... 50 °C

Battery
Li-Ion rechargeable battery 3.8 V / 4450 mAh / 16.91 Wh
up to 11 hours battery life

Dimensions,Weight
162 x 256 x 33 mm, ca. 1250 g

ATEX (Europe)
II 2G Ex db ia op is IIC T5 Gb
II 2D Ex tb ia op is IIIC T100°C Db

IECEx (International)
- Ex db ia op is IIC T5 Gb
- Ex tb ia op is IIIC T100°C Db

Wireless EX module

General specifications

Type
2.4 GHz, Class 1 connectivity, transmitting
power 100 mW Contains FCCID
POOWML-C40

Transmission distance
Up to 10 m [33 ft.] direct line of sight

Transmission distance
Up to 10 m [33 ft.] direct line of sight

Power supply
Batteries: 2 x 1.5 V IEC LR6 (“AA”) batteries
Only use Duracell Industrial ID 1500 or
Energizer E91
Operating time: 14 hours typical use (based upon an
operating cycle of 50% measurement, 50% standby)

Temperature range
Operating time: -10°C to 40°C (14°F to 104°F)

Environmental protection
IP 65: Dustproof and water spray resistant, shockproof

Dimensions
Approx. 81 x 41 x 34 mm (3 1/8” x 1 11/16” x 1 5/16”)

Weight
Approx. 133 g (4.7 oz.) including batteries and cable

Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: ZELM 11 ATEX 0474
IECEx ZLM 11.0009

sensALIGN 5 EX sensor

General specifications

Type
5-axis sensor: 2 planes (4 displacement axes and angle)
Measurement range: Unlimited, dynamically extendible
Resolution: 1 μm (0.04 mil) and angular 10 μRad
Accuracy (avg): > 98%
Measurement rate: approx. 20 Hz

Inclinometer
Resolution: 0.1°
Error: 0.3% full scale

LED indicators
2 LEDs

Environmental protection
IP 65: dustproof and water jets resistant, shockproof
Relative humidity:10% to 90%

Ambient light protection
Yes

Temperature range
Operation: -10°C to 50°C (14°F to 122°F)
Storage: -20°C to 60°C (-4°F to 140°F)

Dimensions
Approx. 105 x 74 x 53 mm
(4 9/64” x 2 29/32” x 2 3/32”)

Weight
Approx. 220 g (7.7 oz)

Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1074X
IECEx EPS 15.0067X

sensALIGN 5 EX laser

General specifications

Type
Semiconductor laser diode

Beam power
< 1mW

Inclinometer
Resolution: 0.1°
Error: 0.3% full scale

Beam divergence
0.3 mrad

Wavelength
630 – 680 nm (red, visible)

Laser class
Class 2 according to IEC 60825-1:2014
The laser complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.

Safety precaution
Do not look into laser beam

Power supply
Batteries: 2 x 1.5 V IEC LR6 (“AA“)
Only use Duracell Industrial ID 1500 or Energizer
E91
Operating time: 120 hours

Protection
IP 65: dustproof and water jets resistant, shockproof
Relative humidity: 10% to 90%

Temperature range
Operation: -10 °C to 50 °C (14 °F to 122 °F)
Storage: -20 °C to 60 °C (-4 °F to 140 °F)

Dimensions
Approx. 105 x 74 x 47 mm
(4 9/64” x 2 29/32” x 1 27/32”)

Weight
Approx. 225 g (7 15/16 oz.)

Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1 075
IECEx EPS 15.0068
Optical output power laser (failure) < 35 mW

Also you can check product : USED Pruftechnik Optalign Touch Laser Alignment System

With Easy-Laser XT770 Shaft you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more.

2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position. We call it 360° Live adjustment.

With the XT770 you have a choice of several different shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.

Dynamic measurement
The EasyTrend program allows you to keep track of machine movement over time, during operation. This is useful when checking for thermal expansion and pipe strain issues for example. This type of measurement requires special DM brackets which can be ordered separately.

Bore alignment with XT770
The Bore center program is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job. 

Use with any device
As all other XT systems, the XT770 can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit.

Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get the it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.

SYSTEM PARTS

Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.

Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features
Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit 
Slideable target
24 hours operating time

Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.

Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).

Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.


SPECS :

Display Unit

Name
XT12

Type of display/size
8" LCD capacitive multi-touch colour display

Internal battery (fixed)
Heavy duty Li Ion chargeable

Connections
USB A, USB C, Charger, AV

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Communication
Wireless technology, WiFi

Relative humidity
10–95%

Loundspeakers
Built-in, rear-facing

Charger
15 V

Camera
13 Mp autofocus, with LED diode

IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)

Help functions
Built-in manual

Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)

Housing material
PC/TPE or PC/TPU

Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]

Weight (without batteries)
1400 g [49.4 oz]

Operating time
Up to 16 h continuously

Measuring Units

Name
XT70-M / XT70-S

Communication
BT wireless technology

Type of detector
2 axis TruePSD 20x20 mm [0.79x0.79"]

Resolution
0.001 mm [0.05 mils]

Measurement accuracy
±1µm ±1%

Measurement range
Up to 20 m [66 feet]

Type of laser
Diode laser

Laser wavelength
630-680 nm

Laser class
Safety class 2

Laser output
<1 mW

Electronic inclinometer
0.1° resolution

Environmental protection
IP class 66 and 67

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Relative humidity
10–95%

Housing material
Anodized aluminium PC/ABS TPE

Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]

Weight
272 g [9.6 oz]

OLED display
128x64 pixels

Operating time
Up to 24 h continuously

Includes:

1 Measuring unit XT70-M IP66/67, 66ft measurement range, up to 24 hour operating time
1 Measuring unit XT70-S IP66/67, 66ft measurement range, up to 24 hour operating time
2 Shaft brackets with chains and rods 120 mm [4.72″]
2 12-1147 magnetic shaft brackets
4 Rods 60 mm [2.36″]
4 Rods 120 mm [4.72″]
2 Magnet bases
2 Offset brackets
2 Extension chain 900 mm [35.4″]
1 Measuring tape 3 m [9.8′]
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Documentation folder
1 Carrying case Large

Also you can check product : USED Leica ScanStation C5 Scalable Laser Scanner - Calibrated

The perfect tool for basic laser shaft alignment
Easy-Laser® XT440 Shaft is a member of our Generation XT alignment systems, built upon our cross-platform technology. This means you will be able to display data on a multitude of different handheld devices, including our own XT12. With XT440 you can carry out the following:

​Align the machine
Check soft foot
Document and share the results

With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process. ​

Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device*. Whatever you choose, the intuitive user interface is the same across all platforms.

The measuring units and XT display unit are shockproof and rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the toughest jobs. 

Unique documentation possibilities 
From the app, you can easily create and share a PDF report containing all measurement data and images. If you use the XT display unit it has a built-in 13MP camera. The XT display unit can also be equipped with an IR camera which allows you to add a thermal image of the machine before and after alignment.

Measuring units XT40-M / XT40-S
The XT40 measuring units have large 30 mm PSD [1.2”], and a state-of-the-art OLED display which shows the angle of the unit, making it easier to position it on the shaft. The line laser technology provides a fast setup and measurement process. 

Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features
Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit 
24 hours operating time

Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.

Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).

Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.

SPECS :

Display Unit

Name
XT12

Type of display/size
8" LCD capacitive multi-touch colour display

Internal battery (fixed)
Heavy duty Li Ion chargeable

Connections
USB A, USB C, Charger, AV

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Communication
Wireless technology, WiFi

Relative humidity
10–95%

Loundspeakers
Built-in, rear-facing

Charger
15 V

Camera
13 Mp autofocus, with LED diode

IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)

Help functions
Built-in manual

Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)

Housing material
PC/TPE or PC/TPU

Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]

Weight (without batteries)
1400 g [49.4 oz]

Operating time
Up to 16 h continuously

Measuring Units

Name
XT40-M / XT40-S

Communication
BT wireless technology

Type of detector
TruePSD 30 mm [1.2”]

Resolution
0.001 mm [0.05 mils]

Measurement accuracy
±5µm ±1%

Measurement range
Up to10 m [33 feet]

Type of laser
Diode laser

Laser wavelength
630–680 nm

Laser class
Safety class 2

Laser output
<1 mW

Electronic inclinometer
0.1° resolution

Environmental protection
IP class 66 and 67

Operating temperature
-10–50 °C

Internal battery
Heavy duty Li Ion chargeable

Storage temperature
-20–50 °C

Relative humidity
10–95%

Housing material
Anodized aluminium PC/ABS TPE

Dimensions
WxHxD: 76x76.7x39.3 mm [3.0x3.0x1.5”]

Weight
245 g [8.6 oz]

OLED display
128x64 pixels

Operating time
>24 h continuously

Contains :

1 Measuring unit XT40-M
1 Measuring unit XT40-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95”]
1 Measuring tape 3 m  [9.8’] 
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium

Optional:
XT12 Display unit, with or without IR camera

Also you can check product : USED Easy-Laser XT440 Laser Shaft Alignment System - Calibrated

With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process. ​

Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device*. Whatever you choose, the intuitive user interface is the same across all platforms.

The measuring units and XT display unit are shockproof and rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the toughest jobs. 

Unique documentation possibilities 
From the app, you can easily create and share a PDF report containing all measurement data and images. If you use the XT display unit it has a built-in 13MP camera. The XT display unit can also be equipped with an IR camera which allows you to add a thermal image of the machine before and after alignment.

SYSTEM PARTS

Measuring units XT40-M / XT40-S

The XT40 measuring units have large 30 mm PSD [1.2”], and a state-of-the-art OLED display which shows the angle of the unit, making it easier to position it on the shaft. The line laser technology provides a fast setup and measurement process. 

Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features
Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit 
24 hours operating time

Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.

Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).

Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.

SPECS :

Display Unit

Name
XT12

Type of display/size
8" LCD capacitive multi-touch colour display

Internal battery (fixed)
Heavy duty Li Ion chargeable

Connections
USB A, USB C, Charger, AV

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Communication
Wireless technology, WiFi

Relative humidity
10–95%

Loundspeakers
Built-in, rear-facing

Charger
15 V

Camera
13 Mp autofocus, with LED diode

IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)

Help functions
Built-in manual

Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)

Housing material
PC/TPE or PC/TPU

Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]

Weight (without batteries)
1400 g [49.4 oz]

Operating time
Up to 16 h continuously

Measuring Units

Name
XT40-M / XT40-S

Communication
BT wireless technology

Type of detector
TruePSD 30 mm [1.2”]

Resolution
0.001 mm [0.05 mils]

Measurement accuracy
±5µm ±1%

Measurement range
Up to10 m [33 feet]

Type of laser
Diode laser

Laser wavelength
630–680 nm

Laser class
Safety class 2

Laser output
<1 mW

Electronic inclinometer
0.1° resolution

Environmental protection
IP class 66 and 67

Operating temperature
-10–50 °C

Internal battery
Heavy duty Li Ion chargeable

Storage temperature
-20–50 °C

Relative humidity
10–95%

Housing material
Anodized aluminium PC/ABS TPE

Dimensions
WxHxD: 76x76.7x39.3 mm [3.0x3.0x1.5”]

Weight
245 g [8.6 oz]

OLED display
128x64 pixels

Operating time
>24 h continuously

Contains :

1 Measuring unit XT40-M
1 Measuring unit XT40-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95”]
1 Measuring tape 3 m  [9.8’] 
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium

Optional:
XT12 Display unit, with or without IR camera

Also you can check product : USED Easy-Laser XT660 Laser Shaft Alignment System - Calibrated

Easy-Laser E540 is a very powerful shaft alignment system, with the ideal balance between performance and price. Program that guides step-by-step with both icons and text makes the system very easy to use for everyone, regardless of prior knowledge.

The E540 system includes measurement programs for horizontal machines, vertical machines and alignment of machine trains with three machines.
The measuring units are pre-mounted for rapid machine set-up. Start with the measuring units positioned anywhere throug 360° around the shaft, then take any three readings down to 20° in-between. Theb adjust the machine with live-values in both horizontal and vertical directions. A PDF report is generated automatically when measurements are saved. Simple and efficient.

The shaft alignment system has a large 5,7", bright colour display that clearly shows all the steps of the measurement. The measuring units have a TruePSD-technology, which gives unlimited resolution. Twin lasr beams, twin PSDs and twin inclinometers give you superb control of the measurement in all situations. The measuring units are incredibly compact featuring Bluetooth wireless technology, a integrated rechargeable battery and large 30mm TruePSD detectors. This means that they are easy to install on most types of machines, even where there is limited space. The wireless technology gives you full freedom of movement around the machine that is to be aligned. Display unit, measuring units and fixtures are all very robust for the highest accurancy in demanding industrial environnements.

SPECS :

System

Relative humidity: 10–95%

Weight (complete system): 7.2 kg  [15.9 lbs]    

Carrying case WxHxD:  500x415x170 mm  [19.7”x16.3”x6.7”]  

Measuring units :ELM40 / ELS40

Type of detector: True PSD 30 mm  [1.2”]

Wireless communication Class I Bluetooth wireless technology

Operating time: >4 h

Resolution: 0.001 mm  [0.05 mils] 

Measuring errors: ±1% 1 digit

Measurement range: Up to 10 m  [33 feet]

Type of laser: Diode laser

Laser wavelength; 635–670 nm

Laser class: Safety class II

Laser output:  <1 mw="" span="">

Electronic inclinometer: 0.1° resolution

Thermal sensors: -20–60 °C

Environmental protection: IP class 65 

Temperature range: -10–50 °C

Housing material Anodized aluminium / ABS plastics

Dimensions WxHxD: 69.0x61.5x41.5 mm  [2.72”x2.42”x1.63”] 

Weight 172 g  [6.0 oz] 

Display unit E52

Type of display/size VGA 5.7” colour screen, backlit LED

Displayed resolution: 0.001 mm / 0.05 thou  

Internal battery (fixed) Heavy duty Li Ion chargeable

Operating time Approx. 30 hours (at typical user cycle)

Temperature range: -10–50 °C

Connections USB A, USB B, Easy-Laser® units, Charger

Wireless communication Class I Bluetooth® wireless technology

Internal memory >100 000 measurements can be saved

Help functions Calculator, Unit converter

Environmental protection IP class 65

Housing material PC/ABS TPE

Dimensions WxHxD: 250x175x63 mm  [9.8”x6.9”x2.5”]

Weight:  1020 g  [2.3 lbs]

Cables

Charging cable (splitter cable) Length 1 m  [39.4”] 

USB cable Length 1.8 m  [70.8”] 

Brackets etc.

Shaft brackets Type: V-fixture for chain, width 18 mm  [0.7”].

Shaft diameters: 20–450 mm  [0.8”–17.7”]

Material: anodised aluminium

Rods Length: 120 mm, 60 mm  [4.72”, 2.36”]  (extendable)

Material: Stainless steel

EasyLink Data base software

System requirements: Windows XP, Vista, 7, 8. For the export functions, Excel

2003 or newer must be installed on the PC.

Contains :

1 Measuring unit M
1 Measuring unit S
1 Display unit
2 Shaft brackets with chains
2 Extension chains
4 Rods 120 mm  [4.72”]
4 Rods 60 mm  [2.36”]
1 Measuring tape 3 m  [9.8’]
1 USB memory with EasyLink™ PC software
1 USB cable
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Shoulder strap for display unit
1 Quick reference manual
1 CD with documentation
1 Carrying case

Also you can check product : NEW Easy-Laser XT440 Laser Shaft Alignment System

The complete laser alignment system

The XT770 Shaft GEO system has all the programs and functions you need to install and keep your machines up and running. Compared to the standard XT770 Shaft it also comes with a separate laser transmitter. With XT770 Shaft GEO you can carry out the following:

Align the machine
Check soft foot
​Check twist and flatness
Check straightness
Measure machine movement over time

With XT770 Shaft GEO you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure straightness, flatness and twist of foundation, soft foot, bearing clearance, and more.

2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position.

You have a choice of five shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.

Laser transmitters for geometric measurements
The system also includes laser transmitter XT20 or XT22, which allow you to take flatness and straightness measurements with the highest reliability and precision.

XT20 is perfect for checking flatness and straightness during machine installation or surface flatness of machined parts.
XT22 also lets you point the laser beam perpendicular to the laser plane. It provides more options for geometrical measurements, and even higher accuracy and precision.

Bore alignment capabilities
The Bore center program is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job. 

Use with any display device
As all other XT systems, the XT770 Shaft GEO can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit.

Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.

SYSTEM PARTS

Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.

Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features
Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit 
Slideable target
24 hours operating time

Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.

Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).

Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.

XT20 Laser transmitter
Laser transmitter XT20 can be used to measure flatness and straightness. The laser beam can sweep 360° with a measurement distance of up to 20 metres [65´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw. The laser head fine turning knob makes it very easy to point the beam at the detector also on long distances (gear ratio 1:132).

We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).

The XT transmitters have wireless connection to our XT Alignment App. This means that you get warning messages during measurement about events that can affect the result negatively, for example if the transmitter position might have been affected, or temperature changes inside the unit. We can also let the app guide you step-by-step when calibrating the levels before measuring.

The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.

The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.

XT22 Laser transmitter
Laser transmitter XT22 can be used to measure flatness, straightness, squareness, level and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw.

We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).

The laser beam can be pointed perpendicular to the flatness plane, within 0.01 mm/m [0.01 mils/inch]. XT22 has a fine turning mechanism for the laser head with a gear ratio of 1:1320, which makes it super easy to point the beam at the detector also on very long distances.

The fiber-coupled laser creates an extremely smooth laser beam profile, free from reflections and irregularities. This means that the laser beam will have very good optical properties in terms of straightness (± 0.003 mm [± 0.12 mils]).

The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.

The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.

TECHNICAL DATA:

Display Unit

Name
XT12

Type of display/size
8" LCD capacitive multi-touch colour display

Internal battery (fixed)
Heavy duty Li Ion chargeable

Connections
USB A, USB C, Charger, AV

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Communication
Wireless technology, WiFi

Relative humidity
10–95%

Loundspeakers
Built-in, rear-facing

Charger
15 V

Camera
13 Mp autofocus, with LED diode

IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)

Help functions
Built-in manual

Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)

Housing material
PC/TPE or PC/TPU

Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]

Weight (without batteries)
1400 g [49.4 oz]

Operating time
Up to 16 h continuously

Measuring Units

Name
XT70-M / XT70-S

Communication
BT wireless technology

Type of detector
2 axis TruePSD 20x20 mm [0.79x0.79"]

Resolution
0.001 mm [0.05 mils]

Measurement accuracy
±1µm ±1%

Measurement range
Up to 20 m [66 feet]

Type of laser
Diode laser

Laser wavelength
630-680 nm

Laser class
Safety class 2

Laser output
<1 mW

Electronic inclinometer
0.1° resolution

Environmental protection
IP class 66 and 67

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Relative humidity
10–95%

Housing material
Anodized aluminium PC/ABS TPE

Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]

Weight
272 g [9.6 oz]

OLED display
128x64 pixels

Operating time
Up to 24 h continuously

Includes:​

1 Measuring unit XT70-M
1 Measuring unit XT70-S
1 Laser transmitter XT20 or XT22
1 Multi-bracket for laser transmitter
2 Shaft brackets with chains and rods 120 mm [4.72"]
1 Set of rods 4×75 mm [2.95"]
2 sets of rods 4×120 mm [4.72"]
1 Magnet base
1 Magnet base with turnable head 
2 Offset brackets
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying Large GEO, with wheels
1 Set of QR code stickers

Optional:
XT12 Display unit, with or without IR camera

Also you can check product : USED Easy-Laser E420 Shaft Alignment System - Calibrated

With Easy-Laser XT770 Shaft you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more.

2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position. We call it 360° Live adjustment.

With the XT770 you have a choice of several different shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.

Dynamic measurement
The EasyTrend program allows you to keep track of machine movement over time, during operation. This is useful when checking for thermal expansion and pipe strain issues for example. This type of measurement requires special DM brackets which can be ordered separately.

Bore alignment with XT770
The Bore center program is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job. 

Use with any device
As all other XT systems, the XT770 can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit.

Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get the it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.

SYSTEM PARTS

Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.

Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features
Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit 
Slideable target
24 hours operating time

Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.

Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).

Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.

SPECS :

Display Unit

Name
XT12

Type of display/size
8" LCD capacitive multi-touch colour display

Internal battery (fixed)
Heavy duty Li Ion chargeable

Connections
USB A, USB C, Charger, AV

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Communication
Wireless technology, WiFi

Relative humidity
10–95%

Loundspeakers
Built-in, rear-facing

Charger
15 V

Camera
13 Mp autofocus, with LED diode

IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)

Help functions
Built-in manual

Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)

Housing material
PC/TPE or PC/TPU

Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]

Weight (without batteries)
1400 g [49.4 oz]

Operating time
Up to 16 h continuously

Measuring Units

Name
XT70-M / XT70-S

Communication
BT wireless technology

Type of detector
2 axis TruePSD 20x20 mm [0.79x0.79"]

Resolution
0.001 mm [0.05 mils]

Measurement accuracy
±1µm ±1%

Measurement range
Up to 20 m [66 feet]

Type of laser
Diode laser

Laser wavelength
630-680 nm

Laser class
Safety class 2

Laser output
<1 mW

Electronic inclinometer
0.1° resolution

Environmental protection
IP class 66 and 67

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Relative humidity
10–95%

Housing material
Anodized aluminium PC/ABS TPE

Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]

Weight
272 g [9.6 oz]

OLED display
128x64 pixels

Operating time
Up to 24 h continuously

Contains :

1 Measuring unit XT70-M
1 Measuring unit XT70-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95"]
4 Rods 120 mm [4.72"]
2 Magnet bases
2 Offset brackets
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium

Optional:
XT12 Display unit, with or without IR camera

Also you can check product : NEW Easy-Laser XT770 Shaft GEO Laser Shaft Alignment and Geo Applications

The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems. It also provides higher accuracy when backlash in the coupling is present. In addition, dot laser allows you to check more things when installing a machine, e.g. twist of foundation and bearing clearance.

With the XT660 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.

The XT products are rugged, rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the tougher jobs.

User-friendly
Use the rugged Easy-Laser XT display unit, or install the free XT Alignment app on your iOS or Android device. The intuitive user interface guides you through the measurement process.

Unique documentation possibilities 
The XT display unit has a 13MP camera. You can also get the XT display unit with a built-in IR camera. This means you can add a thermal image of the machine before and after alignment. You can easily create and share a PDF report containing all measurement data and images.

Measuring units XT60-M / XT60-S
The XT60 measuring units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.

Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features
Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit 
Slideable target
24 hours operating time

Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.

Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).

Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.

SPECS : 

Display Unit

Name
XT12

Type of display/size
8" LCD capacitive multi-touch colour display

Internal battery (fixed)
Heavy duty Li Ion chargeable

Connections
USB A, USB C, Charger, AV

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Communication
Wireless technology, WiFi

Relative humidity
10–95%

Loundspeakers
Built-in, rear-facing

Charger
15 V

Camera
13 Mp autofocus, with LED diode

IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)

Help functions
Built-in manual

Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)

Housing material
PC/TPE or PC/TPU

Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]

Weight (without batteries)
1400 g [49.4 oz]

Operating time
Up to 16 h continuously

Measuring Units

Name
XT60-M / XT60-S

Communication
BT wireless technology

Type of detector
1 axis TruePSD 20x20 mm [0.79x0.79"]

Resolution
0.001 mm [0.05 mils]

Measurement accuracy
±1µm ±1%

Measurement range
Up to 20 m [66 feet]

Type of laser
Diode laser

Laser wavelength
630-680 nm

Laser class
Safety class 2

Laser output
<1 mW

Electronic inclinometer
0.1° resolution

Environmental protection
IP class 66 and 67

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Relative humidity
10–95%

Housing material
Anodized aluminium PC/ABS TPE

Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]

Weight
272 g [9.6 oz]

OLED display
128x64 pixels

Operating time
Up to 24 h continuously

Contains :

1 Measuring unit XT60-M
1 Measuring unit XT60-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95"]
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium

Optional:
XT12 Display unit, with or without IR camera

Also you can check product : NEW Easy-Laser XT770 Laser Shaft Alignment

Shaft alignment in potentially explosive areas
The Easy-Laser® XT550 Shaft system is developed for hazardous areas and is easily operated through our XT Alignment app. It is an advanced measurement system for alignment of horizontal and vertical/flange mounted rotating machinery.​ With XT550 you can carry out the following:

Align the machine
Check base twist
Check bearing play
Check soft foot
Document and share the results

The XT550 alignment system has all the features of the XT660 with one major difference – the measuring units are intrinsically safe, which allows the system to be used in potentially hazardous areas. 

The system comes with Easy-Laser’s dot laser technology, allowing you to measure large machinery and long spans. The measuring units are approved in accordance with the latest ATEX directive*, and are rated both IP66 and IP67 water and dust proof.

Choose your own display unit
System XT550 comes in two configurations; with or without the ATEX approved ecom Tab-Ex® display unit. The XT Alignment app runs on most iOS and Android units, as well as our own XT display unit. However, those are not allowed in potentially explosive areas, but makes for a perfect complement for use in other places.

Note. For use in Ex-classed areas, the mobile device you’re using must be approved for these areas. Always check for approval labels before entering potentially explosive areas. The XT display unit is not Ex/ATEX approved.

*The XT50 measuring units are ATEX approved which means means they comply with the Essential Health and Safety Requirements relating to the design of products intended for use in potentially explosive atmospheres.

SYSTEM PARTS

Measuring units XT50-M / XT50-S
The XT50 measuring units are ATEX approved for use potentially explosive environments. The units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features
Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
ATEX approved.
OLED display shows the angle of the unit.
Slideable target.
20 hours operating time.

Display unit ecom Tab-Ex (optional)
Based on Samsung GALAXY Tab Active, ecom´s hazardous area tablet is certified for use in Zone 1/ 21 & DIV 1 hazardous areas.

Features
Glove-enabled touch-screen
Large 8" display
ATEX approved

SPECS :

Display Unit

Name
ecom Tab-Ex 3

Type of display/size
TFT 8" colour screen

Operating temperature
-20–55 °C

Communication
Bluetooth® 5.0 Wireless technology, WiFi

Camera
13 Mp with flash (rear), 5 Mp (front)

Dimensions
WxHxD: 263x162x26 mm [10.3x6.4x1.0"]

Weight (without batteries)
1100 g [2.42 lbs]

Operating time
Up to 11 h continuously

Operating system
Android

ATEX/UKCA Ex classification
II 2G Ex db ia IIC T6 Gb IP64

II 2D Ex ia tb IIIC T80°C Db
-20°C ≤ Ta ≤ 55 °C

IECEx classification
Ex db ia IIC T6 Gb IP64

Ex ia tb IIIC T80°C Db
-20°C ≤ Ta ≤ 55°C

Ex certificate number
EPS 22 ATEX 1055X, IECEx EPS 22.0014X, EPS 22 UKEX 1055X

Measuring Units

Name
XT50-M / XT50-S

Communication
BT wireless technology

Type of detector
1 axis TruePSD 20x20 mm [0.79x0.79"]

Resolution
0.001 mm [0.05 mils]

Measurement accuracy
±1µm ±1%

Measurement range
Up to 20 m [66 feet]

Type of laser
Diode laser

Laser wavelength
630-680 nm

Laser class
Safety class 2

Laser output
<1 mW

Electronic inclinometer
0.1° resolution

Environmental protection
IP class 66 and 67

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Relative humidity
10–95%

Housing material
Anodized aluminium PC/ABS TPE

Dimensions
WxHxD: 76x76.5x50.9 mm [3.0x3.0x2.0"]

Weight
316 g [11.1 oz]

OLED display
128x64 pixels

Operating time
Up to 20 h continuously

Ex classification
II 2 G Ex ib op is IIC T4 Gb, -10°C ≤ Ta ≤ 50°C
II 2 D Ex ib op is IIIC T135°C Db, -10°C ≤ Ta ≤ 50°C

Ex certificate number
Presafe 17 ATEX 10552X, IECEx PRE 17.0049X

Contains :

1 Measuring unit XT50-M
1 Measuring unit XT50-S
2 Shaft brackets with chains and rods
4 Rods 60 mm [2.36"]
2 Rods 120 mm [4.72"]
2 Extension chains 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Rod tool
1 Charger (100–240 V AC)
1 DC split cable for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Ex/ATEX
 
Optional
1 Display unit ecom Tab-Ex

Also you can check product : NEW Easy-Laser XT660 Laser Shaft Alignment System

Designed for professional alignment in harsh industrial environments, the TKSA 71 complements SKF’s offering with a high-end shaft alignment tool. The instrument is very versatile with ultra-compact measuring units for use in extremely narrow spaces. Its dedicated software applications enable different types of alignments, including horizontal and vertical shafts, spacer shafts and machine trains. Superior alignment performance and long-term industrial durability are achieved with an innovative instrument design that offers high measurement accuracy and excellent protection against dust and water in harsh environments

Applications Include:
Shaft alignment - Easy and intuitive alignments of horizontal shafts with additional features including automatic measurement, minimal 40° total rotation, 9-12-3 guidance and alignment customisation with target values.
Vertical shaft alignment - Easy and intuitive alignment of vertical shaft machines with shimming support for different bolt configurations.
Machine train shaft alignment - Enables operator to align three connected machines, giving a complete overview of machine train alignment and allowing the operator to select stationary feet.
Soft foot - Assists technician in verifying that machine is standing evenly on all four feet. The app supports the operator identifying and correcting a soft foot.
Spacer shaft alignment - Accommodates special requirements of spacer shafts and facilitates the alignment process.
Values - Allows the shaft alignment tool to be used as digital dial gauges; operators can record absolute, zeroed and halved readings to perform customised alignments with manual calculations

TKSA 71 advantages: 
Easy-to-use - Intuitive software applications, guided alignment processes and explanatory video
Wide range of applications - Comprehensive accessories and dedicated software applications
Superior alignment performance - Up to 10 m measurement distance, disturbance compensation, measurement flexibility, only 40° total rotation, automatic measurement and customised alignments with target values
Protection against harsh environments - Completely sealed measuring units (IP67) to withstand dust and water
Ultra-compact measuring units - Use in extremely narrow spaces
Robust carrying case - Excellent protection, convenient transport and wireless in-case charging

Specification :

Manufacturer Product Code
TKSA 71

Basic Product Description
High performance shaft alignment tool

UOM
Each

Weight (Kg)
10.05

User Interface
Phone, tablet (iOS & Android)

Wireless measuring heads
Yes

System measuring distance
0.07 to 10 m mm

Minimal Shaft Rotation
40°

Camera
Yes

Machine Library
Yes

QR Code Recognition
Yes

Machine View
Free 3D rotation

Target Values
Yes

Disturbance Compensation
Yes

Supported alignment applications
Horizontal shafts; Vertical shafts; Machine trains; Spacer shafts; Soft foot; Values

Alignment accessories included
2x measuring units (M&S); 2x shaft V-brackets with chains 480 mm, threaded rods 80 mm and 4x magnets each; 4x threaded extension rods 120 mm; 2x extension chains 980 mm; 2x wireless charging pods; micro USB to USB split charging cable; Measuring tape; Printed certificate of calibration and conformance; Printed quick start guide (EN); A4 sheet with 12 × QR code stickers; Industrial rugged case (IP 67) mm

Measuring errors
< 1% ±10 µm mm

Environmental protetction
IP 67 for measuring units and carrying case

Power adapter
Wireless charging via supplied charging pods; Micro USB to USB split charging cable included; Compatible with standard 5V USB chargers (not included)

Calibration certificate
Supplied with 2 years validity

EAN-Code
7316577208583

Included :

2 × TKSA 71 measuring units (M & S)
2 × Standard V-brackets with chains 480 mm (18.9 in.), rods 80 mm (3.1 in.)
and magnets
2 × Extensions chains 1m (3.3 ft.)
1 × USB to Micro USB split charging cable
2 × Wireless charging pads
1 × Measuring tape 5 m (16.4 ft.)
1 × Printed certificate of calibration and conformance
1 × Printed quick start guide (English)
4 × Extension rods 120 mm (4.7 in.)
1 × Rugged carrying case (IP67), 365 × 295 × 170 mm (14.4 × 11.6 × 6.7 in.)

Also you can check product : USED SKF CMXA80 Microlog Analyzer AX Data Collector

The intuitive and affordable laser shaft alignment system

The TKSA 31 is SKF’s most affordable solution for easy laser shaft alignment. The ergonomic display unit with touch screen makes the instrument very easy to use and the built-in machine library helps storing alignment reports for multiple machines. Large sized laser detectors in the measuring heads reduce the need for pre-alignments and the embedded soft foot tool helps establish the foundation for a successful alignment. Additional functions are live view and automatic measurement. They support fast and effective alignment tasks and make the TKSA 31 an innovative laser shaft alignment tool that is affordable for almost every budget.

Easy measurements can be performed by using the well-known three position measurement (9-12-3 o’clock) with additional positioning flexibility of 40° around each measurement position.

High affordability is achieved by focussing on the standard shaft alignment process and essential functions to allow quick and effective shaft alignments.

"Automatic measurement” enables hands-free measurements by detecting the position of the heads and only taking a measurement when the heads are in the right position.

Automatic reports are generated after each alignment and can be customised with notes about the application. All reports can be exported as pdf files.

Live view supports intuitive measurements and facilitates horizontal and vertical machine position corrections.

The machine library gives an overview of all machines and alignment reports. It simplifies the machine identification and improves the alignment workflow.

The TKSA 31 is supplied in a sturdy SKF carrying case.

TECHNICAL DATA

TECHNICAL DATA

Designation
TKSA 31

Sensors and communication
29 mm (1.1 in.) CCD with red line laser Class 2
Inclinometer ±0.5°, Wired, USB cables

System measuring distance
0,07 to 4 m (0.23 to 13.1 ft) (up to 2 m (6.6 ft) with cables supplied)

Measuring errors
<0,5% ±5 µm

Housing material
20% Glass filled Polycarbonate

Operating time
N/A

Dimensions
120 × 90 × 36 mm (4.7 × 3.5 × 1.4 in.)

Weight
180 g (0.4 lb)

Operating device
5.6" colour resistive touchscreen LCD display. High Impact PC/ABS with over mould

Software/App update
via USB stick

DU Operating time
Up to 7 hours (100% backlight)

Dimensions
205 × 140 × 60 mm (8.1 × 5.5 × 2.4 in.)

Weight
420 g (0.9 lb)

Alignment method
Alignment of horizontal shafts, 3 position measurement 9 -12 -3 (with min. 140° rotation), automatic measurement, soft foot

Live correction values
Vertical and horizontal

Extra features
Machine library, screen orientation flip, automatic .pdf report

Fixture
2× V-brackets with chains, width 21 mm (0.8 in.)

Shaft diameters
20 to 150 mm (0.8 to 5.9 in.)
300 mm (11.8 in.) with optional extension chains (not included)

Max. coupling height *
105 mm (4.2 in.) with standard rods
195 mm (7.7 in.) with optional extension rods (not included)

Power adapter
Input: 100V-240V 50/60Hz AC power supplier
Output: DC 12V 3A with EU, US, UK, AUS adapters

Operating temperature
0 to 45 °C (32 to 113 °F)

IP rating
IP 54

Carrying case dimensions
530 × 110 × 360 mm (20.9 × 4.3 × 14.2 in.)

Total weight (incl. case)
4,75 kg (10.5 lb)

Calibration certificate
Supplied with 2 years validity

INCLUDED : 

1x TKSA 31 Display Unit
1x TKSA 31 M Measuring Unit (incl. 1x USB Cable)
1x TKSA 31 S Measuring Unit (incl. 1x USB Cable)
4x 90 mm  (3.5 in) rods threaded for TKSA 31/41/60/80
2x 400 mm (15.8 in) standard chains for TKSA 31/41
2x Standard V-brackets  (No rods, no chain supplied) for TKSA 31/41/60/80
1x Tommy bar for TKSA 31/41/60/80
1x Power supply with EU, US, UK, AUS adapters for TKSA 31/41/60/80

Also you can check product : USED SKF TKSA 71 Comprehensive Wireless Laser Shaft Alignment System

The TKSA 51 shaft alignment tool provides high measurement flexibility and performance suitable for entry-level to expert alignment jobs. Designed to work with the shaft alignment apps on a tablet or smart phone, this intuitive tool is easy to use and requires no special training. The included accessories enable use of the TKSA 51 for a wide range of alignment applications, such as motors, drives, fans, pumps, gearboxes and more. The tool's mobile apps include tutorial videos to show operators how to perform accurate measurements.

Measurement flexibility
The well-known, three-position measurement gains additional flexibility as measurements can start at any angle and require a total minimal rotation of only 40 degrees. This enables operators to perform alignments of applications with limited space.

Automatic reports
Alignment reports  are generated automatically and can be customised with notes, a machine picture and a signature via touchscreen. These reports can be exported as PDF files and shared with other mobile apps.

Comprehensive and compact
A range of included components, such as magnetic mounting brackets and extension rods and chains, increase the TKSA 51's versatility, yet it remains compact, lightweight and easy to carry.

3-D live view
This feature enables intuitive positioning of heads for quick alignment measurements and displays live when horizontal/vertical alignment correction is achieved. The app enables 3-D rotation of the virtual motor to correspond with the actual machine position.

Disturbance compensation
Measurement values are averaged over time to provide accuracy in presence of vibration or other external disturbances.

The TKSA 51 is supplied in a sturdy SKF carrying case

TECHNICAL DATA

Designations
TKSA 51
Sensors and communication
20 mm (0.8 in.) PSD with line laser Class 2
Inclinometer ±0.1°; Bluetooth 4.0 LE

System measuring distance
0,07 to 5 m (0.23 to 16.4 ft)

Measuring errors
<1% ±10 µm

Housing material
Anodized Aluminum front and PC/ABS plastic back cover

Operating time
Up to 8 hours, rechargeable Li-ion battery fast charging: 10 min. charging for 1h usage

Dimensions
52 × 64 × 50 mm (2.1 × 2.5 × 2 in.)

Weight
190 g (0.4 lb)

Operating device
Samsung Galaxy Tab Active 2 and iPad Mini recommended
iPad, iPod Touch
iPhone SE, Galaxy S6 or above (all not included)

Software/App update
Apple AppStore or on Google Play Store

Operating system requirements
Apple iOS 9 or Android 9 (and above)

Alignment method
Alignment of horizontal and vertical shafts, 3 position measurement 9 -12 -3, automatic measurement, measurement (with min. 40° rotation), soft foot

Live correction values
Vertical and horizontal
Extra features    Machine library
QR code reading
Target values
Disturbance compensation
3D machine free view
Screen rotation on tablets
Automatic PDF report

Fixture
2 × V-brackets with chains, width 15 mm (0.6 in.)

Shaft diameters
20 to 150 mm (0.8 to 5.9 in.)
450 mm (17.7 in.) with extension chains (included)

Max. coupling height *
45 mm (1.8 in.) with standard rods plus 170 mm (6.7 in.) per set of extension rods

Power adapter
Charging via micro USB port (5V)
Micro USB to USB split charging cable supplied
Compatible with 5V USB chargers (not included)

Operating temperature
0 to 45 °C (32 to 113 °F)

IP rating
IP 54

Carrying case dimensions
355 × 250 × 110 mm (14 × 9.8 × 4.3 in.)

Total weight (incl. case)
2,9 kg (6.4 lb)

Calibration certificate
Supplied with 2 years validity

Included :

2 measuring units (M&S)
2 shaft brackets with chains 480 mm (18.9 in.), threaded rods 80 mm (3.2 in.) and magnets
4 threaded extension rods 120 mm (4.7 in.)
2 extension chains 980 mm (38.6 in.)
Micro USB to USB split charging cable
Measuring tape
Printed certificate of calibration and conformance
Quick start guide (EN)
2x A5 sheets with 6x QR code stickers per sheet (total of 12x stickers)
SKF carrying case

Also you can check product : USED SKF CMXA 70 Microlog GX-M Master Data Collector Vibration Analyzer

Shaft Alignment Tool TKSA 71

Versatility and performance for professional alignment
Designed for professional alignment in harsh industrial environments, the TKSA 71 complements SKF’s offering with a high-end shaft alignment tool. The instrument is very versatile with ultra-compact measuring units for use in extremely narrow spaces. Its dedicated software applications enable different types of alignments, including horizontal and vertical shafts, spacer shafts and machine trains. Superior alignment performance and long-term industrial durability are achieved with an innovative instrument design that offers high measurement accuracy and excellent protection against dust and water in harsh environments.

Easy-to-use - Intuitive software applications, guided alignment processes and explanatory videos 

Wide range of applications - Comprehensive accessories and dedicated software applications

Superior alignment performance - Up to 10 m measurement distance, disturbance compensation, measurement flexibility, only 40° total rotation, automatic measurement and customised alignments with target values

Protection against harsh environments - Completely sealed measuring units (IP67) to withstand dust and water

Ultra-compact measuring units - Use in extremely narrow spaces

Robust carrying case - Excellent protection, convenient transport and wireless in-case charging.

TECHNICAL DATA

Designations
TKSA 71
TKSA 71/PRO

Sensors and communication
20 mm (0.8 in) 2nd gen. PSD with line laser Class 2
inclinometer ±0.1°; Bluetooth 4.0 LE
System measuring distance    0,04 to 10 m (0.13 to 32.8 ft)

Measuring errors
<1% ±10 µm

Housing material
Anodized aluminum front and PC/ABS plastic back cover

Operating time
Up to 8 hours, rechargeable Li-ion battery, wireless fast charging, 10 min. charging for 1h usage

Dimensions
52 × 64 × 33 mm (2.1 × 2.5 × 1.3 in.)

Weight
130 g (0.3 lbs)

Operating device
Samsung Galaxy Tab Active 2 and iPad Mini recommended
iPad, iPod Touch
iPhone SE, Galaxy S6 or above (all not included)

Software/App update
Apple AppStore or on Google Play store

Operating system requirements
Apple iOS 9 or Android 9 (and above)

Alignment method
Alignment of horizontal and vertical shafts, 3 position measurement 9 -12 -3, automatic measurement, measurement (with min. 40° rotation), soft foot, machine trains, values, spacer shafts

Live correction values
Vertical and horizontal

Extra features
Machine library, QR code reading, target values, disturbance compensation, 3D machine free view, screen rotation on tablets, automatic .pdf report

Fixture
2 × V-brackets with chains, width 15 mm (0.6 in.)

Shaft diameters
20 to 150 mm diameter (0.8 to 5.9 in.),
450 mm (17.7 in.) with extension chains (included)

Max. coupling height 1)
45 mm (1.8 in.) with standard rods plus 120 mm (4.7 in.) per set of extension rods

Power adapter
Wireless charging via supplied charging pods
micro USB to USB split charging cable supplied

Operating temperature
0 to 45 °C (32 to 113 °F)

IP rating
IP67 for measuring units and carrying case

Carrying case dimensions
TKSA 71 carrying case: 365 × 295 × 170 mm (14.4 × 11.6 × 6.7 in.)
TKSA 71/PRO trolley case: 610 × 430 × 265 mm (24 × 16.9 × 10.4 in.)

Total weight(incl. case)
TKSA 71: 3,9 kg (8.6 lb)
TKSA 71/PRO: 12,5 kg (27.6 lb)

Calibration certificate
Supplied with 2 years validity

CONTENTS TKSA 71

2 x TKSA 71 measuring units (M & S)
2 x Standard V-brackets with chains 480 mm (18.9 in.), rods 80 mm (3.1 in.) and magnets
2 x Extensions chains 1m (3.3 ft.)
1 x USB to Micro USB split charging cable
2 x Wireless charging pads
1 x Measuring tape 5 m (16.4 ft.)
1 x Printed certificate of calibration and conformance
1 x Printed quick start guide (English)
4 x Extension rods 120 mm (4.7 in.)
1 x Rugged carrying case (IP67), 365 x 295 x 170 mm (14.4 x 11.6 x 6.7 in.)

Also you can check product : NEW SKF TKSA 51 Laser Shaft Alignment System