USED GE Inspection Technologies USM 35X Ultrasonic Flaw Detector
The latest version of the USM 35X portable ultrasonic flaw detector from GE’s Inspection Technologies business, is now totally protected against the ingress of dust and high pressure jets of water to IP 66 and contains new software which allows its operation to Japanese weld inspection standards. The USM 35X is designed for industrial environments by weighing only 2.2 kg, having a 14 hour battery life and by having a temperature range of 0 to 60 degrees Celsius.
$1,010.00
The USM 35 X ultrasonic flaw detectors is differentiated from other flaw detectors in its use of color displays which enhances the clarity of inspections, specifically for weld inspections. The use of color can also make easy comparisons during A-Scans.
The USM 35X is designed for industrial environments by weighing only 2.2 kg, having a 14 hour battery life and by having a temperature range of 0 to 60 degrees Celsius.
The base instrument package includes the flaw detector, on board battery charger, AC power supply, lithium ion battery, transport case, operating manual and a certificate of conformity.
Protection according to IP 66
A very sturdy housing has been designed for the USM 35X. We achieve a higher environmental protection and have improved the durability of this flaw detector for harsh use. The IP level corresponds to the degree of protection provided by the housing according to the IEC 529:1989.
IP 66 means that the instrument is totally protected, i.e. dust and water cannot penetrate into the instrument, even with heavy rain, sea spray and powerful jets of water coming from any direction.
Fast and bright color screen
Color brings you many additional benefits in your daily inspection job:
- Color display of monitor gates and curves (DAC, TCG, DGS) for direct recognition
- Messages and alarms in red characters for increased attention
- Use of color to display references (A-scan) to make comparisions easy
Harsh field and industrial environments
- Extended temperature range from 0° C/32° F to 60° C/140° F (-10° C/14° F to 60° C/140° F after individual climatic testing)
- Weighs only 2.2 kg
- Extended battery life to 14 hours
under real test conditions
Intuitive tools to help analysis
- The Color-Leg function displays coded information on the leg in color about angle beam inspection.
- 2 new carats (colorized triangles pointing at the echo for each gate).
- One carat ∇ pointing to the gate bar indicates the sound path measurement point at the echo
- The other carat ∆ pointing up indicates the amplitude measurement point at the echo in the gate.
New readings
Three new additional readings can be displayed for measurements taken with gates:
- dB-difference to reference gain with DAC / TCG (in the USM 35X DAC and USM 35X S)
- DGS reference gain (in the USM 35X S)
- Flaw classification according to JIS Z3060 (in the USM 35X DAC and USM 35X S)
Technical Data :
Calibration ranges
Min0 to 0.5 mm 10 % (steel),
0 to 0.02” 10 % (steel)
Max
0 to 9,999 mm 10 % (steel), 0 to 390” 10 % (steel) within the frequency range from 0.2 to 1 MHz / 0.5 to 4 MHz 0 to 1,420 mm 10% (steel), 0 to 56” 10 % (steel) within the frequency range from 0.8 to 8 MHz / 2 to 20 MHz
Sound velocity
1,000 to 15,000 m/s, 40 to 600 inch/ms variable in steps of 1 m/s, 0.1 inch/ms and fixed programmed values
Display delay
From -10 to 1,000 mm, -0.3 to 40” (340 µs)
Probe delay
0 to 200 µs
Auto calibration
Measurement and setting of sound velocity and probe delay using two known calibration echoes (2-point calibration)
Pulse intensity
220 pF, 1 nF
Damping
50 ohms, 500 ohms (1,000 ohms in TR mode)
Pulse repetition frequency
4 to 1,000 Hz, variable in 10 steps
Frequency ranges (-3 dB)
0.2 to 1 MHz / 0.5 to 4 MHz / 0.8 to 8 MHz / 2 to 20 MHz
Gain
0 to 110 dB, variable in steps
Gain steps
0.5 / 1 / 2 / 6 / 12 dB (or user-adjustable), step 0 is locked
Fine gain
4 dB, continuously variable in 40 steps
Rectification
Full-wave, negative and positive half-wave, RF mode
Reject
Linear, 0 to 80 % screen height Variable in steps of 1 %
Monitor gates
2 independent gates in color bar mode, start and width variable over the entire calibration range, response threshold of 10 to 90 % screen height variable in steps of 1 % (coincidence and anti-coincidence), alarm signal via LED and connectable internal horn, Gate A switchable as interface gate for Gate B, gate magnifier (zooming of gate range over the entire display range).
Sound path measurement
Digital display of sound path (projection distance, depth) between initial pulse and the first echo in the gate, or between the echoes in the two gates, measurement always at the intersection point with the echo flank or echo peak
Measurement resolution
0.01 mm within a range up to 99.99 mm/ 0.1 mm within a range from 100 to 999.9 mm/ 1 mm above 1,000 mm, 0.001” within a range up to 9.999”/ 0.01” above 10” With evaluation in the frozen A-scan: 0.5 % of the calibration range setting
Amplitude display
In % screen height
USM 35X DAC: additionally in dB above DAC or TCG
USM 35X S: additionally in dB above DGS curve or ERS
Displayed reading
Sound path, (reduced) projection distance, depth, amplitude for every gate, userconfigurable at four positions of measurement line and of the zoomed display in the A-scan
A-scan functions
Manual or automatic A-scan freeze, A-scan comparison, echo dynamics (envelope), peak echo storage
Color functions
Patented color-coded display of legs in angle testing, adaptation of background color to the light conditions of test environment, color display of monitor gates and of registration curves (DAC, TCG, DGS) for direct recognition, messages and alarms in red characters
DAC / TCG (Option)
Only USM 35X DAC and USM 35X S: DistanceAmplitude Curves (DAC) or TCG line (TCG) with a maximum of 10 reference echoes, 4 other curves or lines can be displayed with variable dB intervals. JIS DAC can be selected in order to allow inspection acording to JIS Z3060-2002 (Japanese Inspection Standard). Automatic gain control during DAC recording.
DGS (Option)
Only USM 35X S: DGS curves for single-element and dual-element probes (B1S, B2S, B4S, MB2S, MB4S, MB5S, WB…-1, WB…-2, SWB…-2, SWB…-5, MWB…-2, MWB…-4, SEB and MSEB) and for all materials, sound attenuation and transfer loss correction, 4 other curves can be displayed with variable dB intervals.
Display size / resolution
116 mm x 87 mm, 4.6" x 3.4" (W x H) 320 x 240 pixels
A-scan size / resolution
116 mm x 80 mm, 4.6” x 3.2”
320 x 220 pixels (zoom)
Units of measurement
mm, inch
Data memory
800 instrument setups or reports, including AScans can be stored, recalled, printed or exported to a computer
Direct documentation
Display screen contents, report including A-scan, reading, function list (parameter dump)
Printer driver
HP DeskJet, HP LaserJet, HP DJ 1200 (DeskJet)
HP LJ 1012 (LaserJet), EPSON FX/LX, SEIKO DPU
RS 232 interface
9-pin DSUB, bi-directional, 300 - 57,600 baud An USB adapator cable can be provided to connect the USM 35X to a computer that does not have RS 232 port.
Input/Output
8-way Lemo-1 socket (trigger output, gate alarm, test data release) Additional analog output for amplitude or
sound path in selected gate
VGA output
10-way Lemo-1 socket for the connection of an external display screen or beamer
Probe connections
2 x Lemo 1 or BNC
Dialog languages
German, English, French, Italian, Portuguese, Spanish, Danish, Swedish, Norwegian, Finnish, Czech, Slovenian, Romanian, Dutch, Croatian, Hungarian, Russian, Polish, Slovakian, Japanese.
Battery operation
Li-ion battery or 6 C-cells (NiCad, NiMH or AlMn), operating time: 14 hours with Li-ion battery
(6.6 Ah), approx. 3 hours with NiMH cells (3 Ah), battery charge check by an icon in the measurement line
Power pack/ battery charger operation
Via an external power supply (85 to 265 VAC); Operating voltage: 6 to 12 VDC Current consumption: max. 9 W, depending on the setting.
Weight
2.2 kg, 4.9 lbs., including batteries
Size
177 mm x 255 mm x 100 mm,
7.0" x 10" x 3.9" (H x W x D)
Environmental
Protection class: IP 66
Shock proof acc. to DIN IEC 68: 6 ms, 60 g,
3 shocks per orientation
Vibration proof acc. to DIN IEC 68: 0 - 150 Hz, 2 g,
20 cycles per orientation
Operating temperature: 0° to 60°C; 32° to 140°F
(-10°C; 14°F on special request)
Storage temperature: -20° to 60°C; 4° to 140°F
Data Logger Option
Memory capacity
5,000 readings, 500 A-scans for the readings, 100 jobs, 10 comment texts per job
Storable readings
Sound paths and sound path differences of all gates, amplitudes (% SH, dB-to-threshold, dBto-curve, %-to-curve, ERS), alarms of all gates or tolerance monitor
Lines / columns
Number of lines: maximum 5,000 (Linear file with one column), numerical indexing
Number of columns: maximum 26, indexing: A, …, Z
Tolerance monitor
Lower and upper acceptance level with monitor function
Minimum reading capture
Storage of the minimum value measured in continuous scanning, display of the value 3
seconds after uncoupling the probe
Monitor gate
1 additional independent gate in color bar mode
Also you can check product : USED GE Inspection Technologies USM 36 Ultrasonic Flaw Detector
The USM 35X is designed for industrial environments by weighing only 2.2 kg, having a 14 hour battery life and by having a temperature range of 0 to 60 degrees Celsius.
The base instrument package includes the flaw detector, on board battery charger, AC power supply, lithium ion battery, transport case, operating manual and a certificate of conformity.
Protection according to IP 66
A very sturdy housing has been designed for the USM 35X. We achieve a higher environmental protection and have improved the durability of this flaw detector for harsh use. The IP level corresponds to the degree of protection provided by the housing according to the IEC 529:1989.
IP 66 means that the instrument is totally protected, i.e. dust and water cannot penetrate into the instrument, even with heavy rain, sea spray and powerful jets of water coming from any direction.
Fast and bright color screen
Color brings you many additional benefits in your daily inspection job:
- Color display of monitor gates and curves (DAC, TCG, DGS) for direct recognition
- Messages and alarms in red characters for increased attention
- Use of color to display references (A-scan) to make comparisions easy
Harsh field and industrial environments
- Extended temperature range from 0° C/32° F to 60° C/140° F (-10° C/14° F to 60° C/140° F after individual climatic testing)
- Weighs only 2.2 kg
- Extended battery life to 14 hours
under real test conditions
Intuitive tools to help analysis
- The Color-Leg function displays coded information on the leg in color about angle beam inspection.
- 2 new carats (colorized triangles pointing at the echo for each gate).
- One carat ∇ pointing to the gate bar indicates the sound path measurement point at the echo
- The other carat ∆ pointing up indicates the amplitude measurement point at the echo in the gate.
New readings
Three new additional readings can be displayed for measurements taken with gates:
- dB-difference to reference gain with DAC / TCG (in the USM 35X DAC and USM 35X S)
- DGS reference gain (in the USM 35X S)
- Flaw classification according to JIS Z3060 (in the USM 35X DAC and USM 35X S)
Technical Data :
Calibration ranges
Min0 to 0.5 mm 10 % (steel),
0 to 0.02” 10 % (steel)
Max
0 to 9,999 mm 10 % (steel), 0 to 390” 10 % (steel) within the frequency range from 0.2 to 1 MHz / 0.5 to 4 MHz 0 to 1,420 mm 10% (steel), 0 to 56” 10 % (steel) within the frequency range from 0.8 to 8 MHz / 2 to 20 MHz
Sound velocity
1,000 to 15,000 m/s, 40 to 600 inch/ms variable in steps of 1 m/s, 0.1 inch/ms and fixed programmed values
Display delay
From -10 to 1,000 mm, -0.3 to 40” (340 µs)
Probe delay
0 to 200 µs
Auto calibration
Measurement and setting of sound velocity and probe delay using two known calibration echoes (2-point calibration)
Pulse intensity
220 pF, 1 nF
Damping
50 ohms, 500 ohms (1,000 ohms in TR mode)
Pulse repetition frequency
4 to 1,000 Hz, variable in 10 steps
Frequency ranges (-3 dB)
0.2 to 1 MHz / 0.5 to 4 MHz / 0.8 to 8 MHz / 2 to 20 MHz
Gain
0 to 110 dB, variable in steps
Gain steps
0.5 / 1 / 2 / 6 / 12 dB (or user-adjustable), step 0 is locked
Fine gain
4 dB, continuously variable in 40 steps
Rectification
Full-wave, negative and positive half-wave, RF mode
Reject
Linear, 0 to 80 % screen height Variable in steps of 1 %
Monitor gates
2 independent gates in color bar mode, start and width variable over the entire calibration range, response threshold of 10 to 90 % screen height variable in steps of 1 % (coincidence and anti-coincidence), alarm signal via LED and connectable internal horn, Gate A switchable as interface gate for Gate B, gate magnifier (zooming of gate range over the entire display range).
Sound path measurement
Digital display of sound path (projection distance, depth) between initial pulse and the first echo in the gate, or between the echoes in the two gates, measurement always at the intersection point with the echo flank or echo peak
Measurement resolution
0.01 mm within a range up to 99.99 mm/ 0.1 mm within a range from 100 to 999.9 mm/ 1 mm above 1,000 mm, 0.001” within a range up to 9.999”/ 0.01” above 10” With evaluation in the frozen A-scan: 0.5 % of the calibration range setting
Amplitude display
In % screen height
USM 35X DAC: additionally in dB above DAC or TCG
USM 35X S: additionally in dB above DGS curve or ERS
Displayed reading
Sound path, (reduced) projection distance, depth, amplitude for every gate, userconfigurable at four positions of measurement line and of the zoomed display in the A-scan
A-scan functions
Manual or automatic A-scan freeze, A-scan comparison, echo dynamics (envelope), peak echo storage
Color functions
Patented color-coded display of legs in angle testing, adaptation of background color to the light conditions of test environment, color display of monitor gates and of registration curves (DAC, TCG, DGS) for direct recognition, messages and alarms in red characters
DAC / TCG (Option)
Only USM 35X DAC and USM 35X S: DistanceAmplitude Curves (DAC) or TCG line (TCG) with a maximum of 10 reference echoes, 4 other curves or lines can be displayed with variable dB intervals. JIS DAC can be selected in order to allow inspection acording to JIS Z3060-2002 (Japanese Inspection Standard). Automatic gain control during DAC recording.
DGS (Option)
Only USM 35X S: DGS curves for single-element and dual-element probes (B1S, B2S, B4S, MB2S, MB4S, MB5S, WB…-1, WB…-2, SWB…-2, SWB…-5, MWB…-2, MWB…-4, SEB and MSEB) and for all materials, sound attenuation and transfer loss correction, 4 other curves can be displayed with variable dB intervals.
Display size / resolution
116 mm x 87 mm, 4.6" x 3.4" (W x H) 320 x 240 pixels
A-scan size / resolution
116 mm x 80 mm, 4.6” x 3.2”
320 x 220 pixels (zoom)
Units of measurement
mm, inch
Data memory
800 instrument setups or reports, including AScans can be stored, recalled, printed or exported to a computer
Direct documentation
Display screen contents, report including A-scan, reading, function list (parameter dump)
Printer driver
HP DeskJet, HP LaserJet, HP DJ 1200 (DeskJet)
HP LJ 1012 (LaserJet), EPSON FX/LX, SEIKO DPU
RS 232 interface
9-pin DSUB, bi-directional, 300 - 57,600 baud An USB adapator cable can be provided to connect the USM 35X to a computer that does not have RS 232 port.
Input/Output
8-way Lemo-1 socket (trigger output, gate alarm, test data release) Additional analog output for amplitude or
sound path in selected gate
VGA output
10-way Lemo-1 socket for the connection of an external display screen or beamer
Probe connections
2 x Lemo 1 or BNC
Dialog languages
German, English, French, Italian, Portuguese, Spanish, Danish, Swedish, Norwegian, Finnish, Czech, Slovenian, Romanian, Dutch, Croatian, Hungarian, Russian, Polish, Slovakian, Japanese.
Battery operation
Li-ion battery or 6 C-cells (NiCad, NiMH or AlMn), operating time: 14 hours with Li-ion battery
(6.6 Ah), approx. 3 hours with NiMH cells (3 Ah), battery charge check by an icon in the measurement line
Power pack/ battery charger operation
Via an external power supply (85 to 265 VAC); Operating voltage: 6 to 12 VDC Current consumption: max. 9 W, depending on the setting.
Weight
2.2 kg, 4.9 lbs., including batteries
Size
177 mm x 255 mm x 100 mm,
7.0" x 10" x 3.9" (H x W x D)
Environmental
Protection class: IP 66
Shock proof acc. to DIN IEC 68: 6 ms, 60 g,
3 shocks per orientation
Vibration proof acc. to DIN IEC 68: 0 - 150 Hz, 2 g,
20 cycles per orientation
Operating temperature: 0° to 60°C; 32° to 140°F
(-10°C; 14°F on special request)
Storage temperature: -20° to 60°C; 4° to 140°F
Data Logger Option
Memory capacity
5,000 readings, 500 A-scans for the readings, 100 jobs, 10 comment texts per job
Storable readings
Sound paths and sound path differences of all gates, amplitudes (% SH, dB-to-threshold, dBto-curve, %-to-curve, ERS), alarms of all gates or tolerance monitor
Lines / columns
Number of lines: maximum 5,000 (Linear file with one column), numerical indexing
Number of columns: maximum 26, indexing: A, …, Z
Tolerance monitor
Lower and upper acceptance level with monitor function
Minimum reading capture
Storage of the minimum value measured in continuous scanning, display of the value 3
seconds after uncoupling the probe
Monitor gate
1 additional independent gate in color bar mode
Also you can check product : USED GE Inspection Technologies USM 36 Ultrasonic Flaw Detector
- Availability: 9 In Stock
- Model: GE USM 35X
-
Brand:
