NEW Easy-Laser XT770 Shaft GEO Laser Shaft Alignment and Geo Applications
The XT770 Shaft GEO system has all the programs and functions you need to install and keep your machines up and running. Compared to the standard XT770 Shaft it also comes with a separate laser transmitter. With XT770 Shaft GEO you can carry out the following: Align the machine Check soft foot Check twist and flatness Check straightness Measure machine movement over time
5,865.63€
The complete laser alignment system
The XT770 Shaft GEO system has all the programs and functions you need to install and keep your machines up and running. Compared to the standard XT770 Shaft it also comes with a separate laser transmitter. With XT770 Shaft GEO you can carry out the following:
Align the machine
Check soft foot
Check twist and flatness
Check straightness
Measure machine movement over time
With XT770 Shaft GEO you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure straightness, flatness and twist of foundation, soft foot, bearing clearance, and more.
2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position.
You have a choice of five shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.
Laser transmitters for geometric measurements
The system also includes laser transmitter XT20 or XT22, which allow you to take flatness and straightness measurements with the highest reliability and precision.
XT20 is perfect for checking flatness and straightness during machine installation or surface flatness of machined parts.
XT22 also lets you point the laser beam perpendicular to the laser plane. It provides more options for geometrical measurements, and even higher accuracy and precision.
Bore alignment capabilities
The Bore center program is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job.
Use with any display device
As all other XT systems, the XT770 Shaft GEO can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit.
Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.
SYSTEM PARTS
Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
XT20 Laser transmitter
Laser transmitter XT20 can be used to measure flatness and straightness. The laser beam can sweep 360° with a measurement distance of up to 20 metres [65´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw. The laser head fine turning knob makes it very easy to point the beam at the detector also on long distances (gear ratio 1:132).
We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).
The XT transmitters have wireless connection to our XT Alignment App. This means that you get warning messages during measurement about events that can affect the result negatively, for example if the transmitter position might have been affected, or temperature changes inside the unit. We can also let the app guide you step-by-step when calibrating the levels before measuring.
The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.
The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.
XT22 Laser transmitter
Laser transmitter XT22 can be used to measure flatness, straightness, squareness, level and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw.
We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).
The laser beam can be pointed perpendicular to the flatness plane, within 0.01 mm/m [0.01 mils/inch]. XT22 has a fine turning mechanism for the laser head with a gear ratio of 1:1320, which makes it super easy to point the beam at the detector also on very long distances.
The fiber-coupled laser creates an extremely smooth laser beam profile, free from reflections and irregularities. This means that the laser beam will have very good optical properties in terms of straightness (± 0.003 mm [± 0.12 mils]).
The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.
The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.
TECHNICAL DATA:
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT70-M / XT70-S
Communication
BT wireless technology
Type of detector
2 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Includes:
1 Measuring unit XT70-M
1 Measuring unit XT70-S
1 Laser transmitter XT20 or XT22
1 Multi-bracket for laser transmitter
2 Shaft brackets with chains and rods 120 mm [4.72"]
1 Set of rods 4×75 mm [2.95"]
2 sets of rods 4×120 mm [4.72"]
1 Magnet base
1 Magnet base with turnable head
2 Offset brackets
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying Large GEO, with wheels
1 Set of QR code stickers
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : USED Easy-Laser E420 Shaft Alignment System - Calibrated
The XT770 Shaft GEO system has all the programs and functions you need to install and keep your machines up and running. Compared to the standard XT770 Shaft it also comes with a separate laser transmitter. With XT770 Shaft GEO you can carry out the following:
Align the machine
Check soft foot
Check twist and flatness
Check straightness
Measure machine movement over time
With XT770 Shaft GEO you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure straightness, flatness and twist of foundation, soft foot, bearing clearance, and more.
2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position.
You have a choice of five shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.
Laser transmitters for geometric measurements
The system also includes laser transmitter XT20 or XT22, which allow you to take flatness and straightness measurements with the highest reliability and precision.
XT20 is perfect for checking flatness and straightness during machine installation or surface flatness of machined parts.
XT22 also lets you point the laser beam perpendicular to the laser plane. It provides more options for geometrical measurements, and even higher accuracy and precision.
Bore alignment capabilities
The Bore center program is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job.
Use with any display device
As all other XT systems, the XT770 Shaft GEO can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit.
Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.
SYSTEM PARTS
Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
XT20 Laser transmitter
Laser transmitter XT20 can be used to measure flatness and straightness. The laser beam can sweep 360° with a measurement distance of up to 20 metres [65´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw. The laser head fine turning knob makes it very easy to point the beam at the detector also on long distances (gear ratio 1:132).
We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).
The XT transmitters have wireless connection to our XT Alignment App. This means that you get warning messages during measurement about events that can affect the result negatively, for example if the transmitter position might have been affected, or temperature changes inside the unit. We can also let the app guide you step-by-step when calibrating the levels before measuring.
The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.
The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.
XT22 Laser transmitter
Laser transmitter XT22 can be used to measure flatness, straightness, squareness, level and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw.
We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).
The laser beam can be pointed perpendicular to the flatness plane, within 0.01 mm/m [0.01 mils/inch]. XT22 has a fine turning mechanism for the laser head with a gear ratio of 1:1320, which makes it super easy to point the beam at the detector also on very long distances.
The fiber-coupled laser creates an extremely smooth laser beam profile, free from reflections and irregularities. This means that the laser beam will have very good optical properties in terms of straightness (± 0.003 mm [± 0.12 mils]).
The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.
The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.
TECHNICAL DATA:
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT70-M / XT70-S
Communication
BT wireless technology
Type of detector
2 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Includes:
1 Measuring unit XT70-M
1 Measuring unit XT70-S
1 Laser transmitter XT20 or XT22
1 Multi-bracket for laser transmitter
2 Shaft brackets with chains and rods 120 mm [4.72"]
1 Set of rods 4×75 mm [2.95"]
2 sets of rods 4×120 mm [4.72"]
1 Magnet base
1 Magnet base with turnable head
2 Offset brackets
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying Large GEO, with wheels
1 Set of QR code stickers
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : USED Easy-Laser E420 Shaft Alignment System - Calibrated
- Availability: 16 In Stock
- Model: XT770 Shaft GEO
-
Brand:
