ADASH
Explore the most powerful Vibration Analyzer on the market – the A4500 VA5 Pro is the newest member in the Adash product range; comes with touchscreen and large display – complete with the Data Collector, Run-up Analyser, Balancer, Recorder, Stethoscope, FASIT, Lubri, Bump Test, Octave Analyser, Ultrasound, Camera, Pictures Gallery and Thermal Imaging modules. This 24-bit 120 dB instrument can be set to measure up to frequency span of 90 kHz and with 3,276,800 lines resolution. It can record up to 20 hours at 64kHz sample rate make it ideal for post analysis of any machinery fault.
The A4400 VA4 Pro II is a unique 24-bit, 120 dB instrument for machinery vibration diagnostics. Beside its ability to simultaneously in 4 AC Channels, 4 DC Channels and 1 Trigger; the A4400 VA4 Pro II has complete built-in modules for analysing, data collecting and the recording of vibration signals, in-situ balancing, run up and cost down, control and checking of lubrication and listening to vibration signals by the stethoscope feature. The instrument is equipped with an expert system that automatically detects machinery defects and the ACMT – low speed bearing analysis; both developed by Adash
Adash A4300-VA3 is portable very modern construction one or two channel datacollector and analyser. Main features are small dimensions and weight (970 g), large LCD display with high resolution and powerful processor which provides fast data analysis.Adash A4300-VA3 is determined for bearing condition analysis, lubrication analysis and analyses of mechanical defects of machines – unbalance, misalignment, resonance, looseness. Enables to perform any of the FFT, order or time signal analyses. Instrument memory enables archiving of large amount of data.
The A4300 VA3 Pro is the newest addition to our range of portable devices for vibration diagnostics.
The A4300 VA3 Pro instrument can be confi gured according to your requirements by choosing optional modules: analyzer, route, balancer, recorder, run up or ultrasound. Optional modules can be purchased also additionally and downloaded to the instrument without the need of sending it back to the factory.
There is a non-contact IR temperature sensor (for immediate bearing temperature measurement) and a LED stroboscope/torch. The A4300 VA3 Pro is designed for one-handed operation. With a weight of just 780g and a battery life of more than 10 hours of operation, the unit is suitable for long route measurements.
Vibrio M Ex instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and lubrication assessment. The A4900 – Vibrio M Ex is equipped with 4 MB of memory for data storage. Data memory allows you to perform off-route and route measurements. The professional software DDS for Vibrio M Ex can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included. The A4900 – Vibrio M Ex is supplied as a complete system including quality piezoelectric sensor, magnet and coiled cable for industrial use.
NEW Adash A4500 - VA5 Pro Vibration Analyzer - Thermal Imaging and Ultrasound Measurement (A4500 - VA5 Pro)
Adash A4500 - VA5 Pro
Vibration Analyser for Professionals
Explore the most powerful Vibration Analyzer on the market – the A4500 VA5 Pro is the newest member in the Adash product range; comes with touchscreen and large display – complete with the Data Collector, Run-up Analyser, Balancer, Recorder, Stethoscope, FASIT, Lubri, Bump Test, Octave Analyser, Ultrasound, Camera, Pictures Gallery and Thermal Imaging modules.
This 24-bit 120 dB instrument can be set to measure up to frequency span of 90 kHz and with 3,276,800 lines resolution. It can record up to 20 hours at 64kHz sample rate make it ideal for post analysis of any machinery fault.
The instrument is equipped with an expert system that automatically detects machinery defects and the ACMT – low speed bearing analysis; both developed by Adash.
The instrument can perform simultaneous data acquisition with 4 channels AC (vibration), 4 channels DC (process values) and tachometer using the optional BNC breakout box.
Use multitasking tool in order to analyse your machinery. Analyse your data on site and enjoy the big screen size for playing with variable cursors, bearing fault frequencies indication and FFTs in cascade. Touchscreen and keyboard is at your service whenever you need it.
Data Acquisition Time
The VA4 Pro analyser with built-in high speed chips approach the job with much more advanced concept. For every individual Parameter created in the instrument memory; the internal virtual analyser will set the instrument to store the single input signal into DSP board and perform required data acquisition internally; it means that the total required time is not equal the sum of all individual times, but it is equal the time required for the single longest parameter – base on previous example – it will be only 8 seconds.
That means – with the triaxial sensors, the VA4 Pro can collect all the parameters in 3 axes for only 8 seconds against the 96 seconds required of a single channel analyser to measure in 3 axes!
This 12 times* in time saving means that there is no time lag and phase angle between the first and last measured parameter as they are using the same input signal, this also especially important to provide simultaneous results in 3 axes during trouble-shooting mode.
Note:
12 times in time saving when compared against conventional instrument using single sensor, 4 times in time saving when compared against conventional instrument using a triaxial sensor
The larger number of parameter utilised in the instrument, the higher is the percentage in time saving.
Specification :
Input channels:
4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACHO for speed probe/external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
Frequency ranges (-3 dB):
Maximum range: 0.35 Hz - 90 kHz (1 Ch, 194 kHz sampling)
Maximum range: 0.35 Hz - 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 0.35 Hz - 25 Hz (4 Ch, 64 Hz sampling)
Sampling mode:
Fully simultaneous for 4 channels
FFT resolution:
Min. 100 lines
Max. 3 276 800 lines
Unit modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Run up - run up and coast down measurements
Recorder - raw signal recording for later post analysis
Stethoscope - listening of the bearing/machine noise
FASIT - expert system for automatic fault detection
MCSA
Octave analyzer - hearable sound measurements
Bump test - measurement of natural frequencies
ADS - Animated Deflection Shapes (Operating deflection shapes)
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
Camera
IR Camera
Gallery
Display:
1125 x 800 pixels
Built-in camera:
5 MPx, autofocus
Thermal imaging camera (optionally):
384 x 288 pixels
-10°C ~ 150°C (or up to 250°C) temp. range
50 mK NETD sensitivity
Processor:
Intel Atom 1.9 GHz
Memory, Route:
64 GB, max. 16 GB for one route, number of routes is limited by free memory only
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Raw signal recorder:
64 kHz sampling frequency
4 Ch memory consumption 3 GB/hour
4 Ch total recording - 20 hours
Trigger:
Manual, External, Signal level, Time
Speed change, Time interval
Interface:
USB 3.0, 2.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery (up to 8 hours of operation)
Case:
IP 65 rating, aluminium heavy duty
Size & Weight:
29,5 x 23 x 4,9 cm, 1,98 kg
Languages:
English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish, Romanian, Thai
Includes :
VA5 Vibration Analyzer
Single License of DDS Digital Diagnostics Software 2023
Charger
Leather holster
Carrying strap and hard shell Profi Case
1x standard sensor
1x 6ft. coiled cable
Flat rare earth magnet
Also you can check product : NEW Adash A4400 VA4 Pro II The Fastest 4-Channel Vibration Analyzer
Vibration Analyser for Professionals
Explore the most powerful Vibration Analyzer on the market – the A4500 VA5 Pro is the newest member in the Adash product range; comes with touchscreen and large display – complete with the Data Collector, Run-up Analyser, Balancer, Recorder, Stethoscope, FASIT, Lubri, Bump Test, Octave Analyser, Ultrasound, Camera, Pictures Gallery and Thermal Imaging modules.
This 24-bit 120 dB instrument can be set to measure up to frequency span of 90 kHz and with 3,276,800 lines resolution. It can record up to 20 hours at 64kHz sample rate make it ideal for post analysis of any machinery fault.
The instrument is equipped with an expert system that automatically detects machinery defects and the ACMT – low speed bearing analysis; both developed by Adash.
The instrument can perform simultaneous data acquisition with 4 channels AC (vibration), 4 channels DC (process values) and tachometer using the optional BNC breakout box.
Use multitasking tool in order to analyse your machinery. Analyse your data on site and enjoy the big screen size for playing with variable cursors, bearing fault frequencies indication and FFTs in cascade. Touchscreen and keyboard is at your service whenever you need it.
Data Acquisition Time
The VA4 Pro analyser with built-in high speed chips approach the job with much more advanced concept. For every individual Parameter created in the instrument memory; the internal virtual analyser will set the instrument to store the single input signal into DSP board and perform required data acquisition internally; it means that the total required time is not equal the sum of all individual times, but it is equal the time required for the single longest parameter – base on previous example – it will be only 8 seconds.
That means – with the triaxial sensors, the VA4 Pro can collect all the parameters in 3 axes for only 8 seconds against the 96 seconds required of a single channel analyser to measure in 3 axes!
This 12 times* in time saving means that there is no time lag and phase angle between the first and last measured parameter as they are using the same input signal, this also especially important to provide simultaneous results in 3 axes during trouble-shooting mode.
Note:
12 times in time saving when compared against conventional instrument using single sensor, 4 times in time saving when compared against conventional instrument using a triaxial sensor
The larger number of parameter utilised in the instrument, the higher is the percentage in time saving.
Specification :
Input channels:
4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACHO for speed probe/external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
Frequency ranges (-3 dB):
Maximum range: 0.35 Hz - 90 kHz (1 Ch, 194 kHz sampling)
Maximum range: 0.35 Hz - 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 0.35 Hz - 25 Hz (4 Ch, 64 Hz sampling)
Sampling mode:
Fully simultaneous for 4 channels
FFT resolution:
Min. 100 lines
Max. 3 276 800 lines
Unit modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Run up - run up and coast down measurements
Recorder - raw signal recording for later post analysis
Stethoscope - listening of the bearing/machine noise
FASIT - expert system for automatic fault detection
MCSA
Octave analyzer - hearable sound measurements
Bump test - measurement of natural frequencies
ADS - Animated Deflection Shapes (Operating deflection shapes)
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
Camera
IR Camera
Gallery
Display:
1125 x 800 pixels
Built-in camera:
5 MPx, autofocus
Thermal imaging camera (optionally):
384 x 288 pixels
-10°C ~ 150°C (or up to 250°C) temp. range
50 mK NETD sensitivity
Processor:
Intel Atom 1.9 GHz
Memory, Route:
64 GB, max. 16 GB for one route, number of routes is limited by free memory only
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Raw signal recorder:
64 kHz sampling frequency
4 Ch memory consumption 3 GB/hour
4 Ch total recording - 20 hours
Trigger:
Manual, External, Signal level, Time
Speed change, Time interval
Interface:
USB 3.0, 2.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery (up to 8 hours of operation)
Case:
IP 65 rating, aluminium heavy duty
Size & Weight:
29,5 x 23 x 4,9 cm, 1,98 kg
Languages:
English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish, Romanian, Thai
Includes :
VA5 Vibration Analyzer
Single License of DDS Digital Diagnostics Software 2023
Charger
Leather holster
Carrying strap and hard shell Profi Case
1x standard sensor
1x 6ft. coiled cable
Flat rare earth magnet
Also you can check product : NEW Adash A4400 VA4 Pro II The Fastest 4-Channel Vibration Analyzer
Explore the most powerful Vibration Analyzer on the market – the A4500 VA5 Pro is the newest member in the Adash product range; comes with touchscreen and large display – complete with the Data Collector, Run-up Analyser, Balancer, Recorder, Stethoscope, FASIT, Lubri, Bump Test, Octave Analyser, Ultrasound, Camera, Pictures Gallery and Thermal Imaging modules. This 24-bit 120 dB instrument can be set to measure up to frequency span of 90 kHz and with 3,276,800 lines resolution. It can record up to 20 hours at 64kHz sample rate make it ideal for post analysis of any machinery fault.
NEW Adash A4400 VA4 Pro II The Fastest 4-Channel Vibration Analyzer (A4400 VA4 Pro II)
Adash A4400 VA4 Pro II
Vibration Analyser for Professionals
The A4400 VA4 Pro II is a unique 24-bit, 120 dB instrument for machinery vibration diagnostics. Beside its ability to simultaneously in 4 AC Channels, 4 DC Channels and 1 Trigger; the A4400 VA4 Pro II has complete built-in modules for analysing, data collecting and the recording of vibration signals, in-situ balancing, run up and cost down, control and checking of lubrication and listening to vibration signals by the stethoscope feature.
The instrument is equipped with an expert system that automatically detects machinery defects and the ACMT – low speed bearing analysis; both developed by Adash.
The A4400 VA4 Pro II has unmatched 3,276,800 lines resolution in real time with frequency range up to 90 kHz is designed for engineers and technicians dealing with machinery and structural as well and dynamic balancing of rotating machinery.
Data Acquisition Time
The VA4 Pro analyser with built-in high speed chips approach the job with much more advanced concept. For every individual Parameter created in the instrument memory; the internal virtual analyser will set the instrument to store the single input signal into DSP board and perform required data acquisition internally; it means that the total required time is not equal the sum of all individual times, but it is equal the time required for the single longest parameter – base on previous example – it will be only 8 seconds.
That means – with the triaxial sensors, the VA4 Pro can collect all the parameters in 3 axes for only 8 seconds against the 96 seconds required of a single channel analyser to measure in 3 axes!
This 12 times* in time saving means that there is no time lag and phase angle between the first and last measured parameter as they are using the same input signal, this also especially important to provide simultaneous results in 3 axes during trouble-shooting mode.
Note:
12 times in time saving when compared against conventional instrument using single sensor, 4 times in time saving when compared against conventional instrument using a triaxial sensor
The larger number of parameter utilised in the instrument, the higher is the percentage in time saving.
Technical Specification:
Input channels:
4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACHO for speed probe/external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.35 Hz - 90 kHz (1 Ch, 194 kHz sampling)
Maximum range: 0.35 Hz - 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 0.35 Hz - 25 Hz (4 Ch, 64 Hz sampling)
Sampling mode:
Fully simultaneous for 4 channels
FFT resolution:
Min. 100 lines
Max. 3 276 800 lines
Unit modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Run up - run up and coast down measurements
Recorder - raw signal recording for later post analysis
Stethoscope - listening of the bearing/machine noise
FASIT - expert system for automatic fault detection
Octave analyzer - hearable sound measurements
Bump test - measurement of natural frequencies
ADS - Animated Deflection Shapes (Operating deflection shapes)
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
Display:
1140 x 800 pixels
Processor:
Intel Atom 1.9 GHz
Memory, Route:
64 GB, max. 16 GB for one route, number of routes is limited by free memory only
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Raw signal recorder:
64 kHz sampling frequency
4 Ch memory consumption 3 GB/hour
4 Ch total recording - 20 hours
Trigger:
Manual, External, Signal level, Time
Speed change, Time interval
Interface:
USB 3.0, 2.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery 8 hours of operation
Case:
Aluminium heavy duty
Size & Weight:
280 x 205 x 55 mm, 2200 g
Languages:
English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish, Romanian, Thai
Includes:
(1) A4400 VA4 Pro instrument
(2) Accelerometer
(2) Coiled cables
(2) Magnetic base sets
(1) Battery Charger
(1) Laser Tacho Stobe, mag base, cable, reflective tape
(1) Shoulder strap
(1) Transport case
(1) User Manual
(1) DDS 2011 Pro Software package
(1) Bearing Data Base
(1) A4400 Data Interface Software
Also you can check product : NEW Adash A4500 - VA5 Pro Vibration Analyzer - Thermal Imaging and Ultrasound Measurement
Vibration Analyser for Professionals
The A4400 VA4 Pro II is a unique 24-bit, 120 dB instrument for machinery vibration diagnostics. Beside its ability to simultaneously in 4 AC Channels, 4 DC Channels and 1 Trigger; the A4400 VA4 Pro II has complete built-in modules for analysing, data collecting and the recording of vibration signals, in-situ balancing, run up and cost down, control and checking of lubrication and listening to vibration signals by the stethoscope feature.
The instrument is equipped with an expert system that automatically detects machinery defects and the ACMT – low speed bearing analysis; both developed by Adash.
The A4400 VA4 Pro II has unmatched 3,276,800 lines resolution in real time with frequency range up to 90 kHz is designed for engineers and technicians dealing with machinery and structural as well and dynamic balancing of rotating machinery.
Data Acquisition Time
The VA4 Pro analyser with built-in high speed chips approach the job with much more advanced concept. For every individual Parameter created in the instrument memory; the internal virtual analyser will set the instrument to store the single input signal into DSP board and perform required data acquisition internally; it means that the total required time is not equal the sum of all individual times, but it is equal the time required for the single longest parameter – base on previous example – it will be only 8 seconds.
That means – with the triaxial sensors, the VA4 Pro can collect all the parameters in 3 axes for only 8 seconds against the 96 seconds required of a single channel analyser to measure in 3 axes!
This 12 times* in time saving means that there is no time lag and phase angle between the first and last measured parameter as they are using the same input signal, this also especially important to provide simultaneous results in 3 axes during trouble-shooting mode.
Note:
12 times in time saving when compared against conventional instrument using single sensor, 4 times in time saving when compared against conventional instrument using a triaxial sensor
The larger number of parameter utilised in the instrument, the higher is the percentage in time saving.
Technical Specification:
Input channels:
4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACHO for speed probe/external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.35 Hz - 90 kHz (1 Ch, 194 kHz sampling)
Maximum range: 0.35 Hz - 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 0.35 Hz - 25 Hz (4 Ch, 64 Hz sampling)
Sampling mode:
Fully simultaneous for 4 channels
FFT resolution:
Min. 100 lines
Max. 3 276 800 lines
Unit modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Run up - run up and coast down measurements
Recorder - raw signal recording for later post analysis
Stethoscope - listening of the bearing/machine noise
FASIT - expert system for automatic fault detection
Octave analyzer - hearable sound measurements
Bump test - measurement of natural frequencies
ADS - Animated Deflection Shapes (Operating deflection shapes)
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
Display:
1140 x 800 pixels
Processor:
Intel Atom 1.9 GHz
Memory, Route:
64 GB, max. 16 GB for one route, number of routes is limited by free memory only
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Raw signal recorder:
64 kHz sampling frequency
4 Ch memory consumption 3 GB/hour
4 Ch total recording - 20 hours
Trigger:
Manual, External, Signal level, Time
Speed change, Time interval
Interface:
USB 3.0, 2.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery 8 hours of operation
Case:
Aluminium heavy duty
Size & Weight:
280 x 205 x 55 mm, 2200 g
Languages:
English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish, Romanian, Thai
Includes:
(1) A4400 VA4 Pro instrument
(2) Accelerometer
(2) Coiled cables
(2) Magnetic base sets
(1) Battery Charger
(1) Laser Tacho Stobe, mag base, cable, reflective tape
(1) Shoulder strap
(1) Transport case
(1) User Manual
(1) DDS 2011 Pro Software package
(1) Bearing Data Base
(1) A4400 Data Interface Software
Also you can check product : NEW Adash A4500 - VA5 Pro Vibration Analyzer - Thermal Imaging and Ultrasound Measurement
The A4400 VA4 Pro II is a unique 24-bit, 120 dB instrument for machinery vibration diagnostics. Beside its ability to simultaneously in 4 AC Channels, 4 DC Channels and 1 Trigger; the A4400 VA4 Pro II has complete built-in modules for analysing, data collecting and the recording of vibration signals, in-situ balancing, run up and cost down, control and checking of lubrication and listening to vibration signals by the stethoscope feature. The instrument is equipped with an expert system that automatically detects machinery defects and the ACMT – low speed bearing analysis; both developed by Adash
NEW Adash A4300 VA3 Pro Ex - 3 Channel Vibration Analyzer and Data Collector (A4300 VA3 Pro Ex)
The A4300 VA3 Pro Ex is the newest addition to our range of portable devices for vibration diagnostics and machine balancing. There are 2 signal inputs and 1 tacho/trigger input. Input 2 offers connectivity to a triaxial sensor, therefore all 3 channels can be measured simultaneously. The expert system developed by Adash can automatically detect machine faults such as unbalance, looseness, misalignment and bearing faults.
There is a non-contact IR temperature sensor (for immediate bearing temperature measurement) and a LED stroboscope/torch.
The A4300 VA3 Pro Ex is designed for one- handed operation. With a weight of just 760g and a battery life of more than 6 hours of operation, the unit is suitable for long route measurements.
The A4300 VA3 Pro Ex instrument can be confi gured according to your requirements by choosing optional modules: analyzer, route, balancer, recorder, run up or ultrasound. Optional modules can be purchased also additionally and downloaded to the instrument without the need of sending it back to the factory.
VA3 Pro Ex is a professional vibration analyzer determined to protect your machinery. Build your kit according to your needs. Single or multi axis sensors, speed probe and other accessories are ready for your vibration analysis and predictive maintenance program on general.
EXPLOSIVE ATMOSPHERES
Machinery condition monitoring is a necessity also in hazardous industry environments such as mines, oil & gas, petrochemical etc. To protect human lives and equipment the devices used in such harsh areas has to be explosion proof. VA3 Pro Ex is ready at your service.
VERSATILITY & CONNECTIVITY
3x AC input – vibrations
3x DC input – process values
1x Trigger input (speed probe)
Triaxial sensor ready
IR temperature sensor
LED stroboscope / flashlight
Fast USB 2.0 communication
Robust Push-Pull connectors
VA3 PROEX FREE DDS SOFTWARE
Collect & Import
VA3 Pro Ex along with free DDS software can measure and store two basic measurements. Acceleration in g for the bearing condition and Velocity in mm/s (or ips) for the whole machine body condition.
Collect the data with VA3 Pro Ex regularly and import them into free DDS software. Follow vibration trends and observe the actual condition of your machines.
VA3 Pro Ex specifications :
Ex certification:
II 3G Ex ic op is IIC T3 Gc
Input channels:
3 x AC, ICP® power supply on/off
3 x DC for process values
1 x TACHO for speed probe / external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.5 Hz - 25 kHz (64 kHz sampling)
Minimum range: 0.5 Hz - 25 Hz (64 Hz sampling)
Sampling mode:
Fully simultaneous for all 3 channels
FFT resolution:
Min. 25 lines
Max. 25 600 lines
Measurement modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Recorder - raw signal recording for later post analysis
Run Up - run up and coast down measurements
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
LED stroboscope, LED torch
FASIT - Expert system for automatic fault detection
Vibration meter - basic vibration measurements
Software:
Free version of DDS software (limited database size)
Licensed DDS software
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
IR temperature measurement:
From -70˚C to 380˚C (-94˚F to 716˚F)
Trigger:
Manual, External, Amplitude, Tacho
Display:
Colour 240 x 320 pixels, TFT
Interface:
USB 2.0, 3.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery pack for more than 6 hours of continous operation
Case:
Aluminium - heavy duty
Weight:
780 g
Dimensions:
230 x 82 x 32 mm
Languages:
Languages: English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish.
Also you can check product : NEW Adash A4500 - VA5 Pro Vibration Analyzer - Thermal Imaging and Ultrasound Measurement
There is a non-contact IR temperature sensor (for immediate bearing temperature measurement) and a LED stroboscope/torch.
The A4300 VA3 Pro Ex is designed for one- handed operation. With a weight of just 760g and a battery life of more than 6 hours of operation, the unit is suitable for long route measurements.
The A4300 VA3 Pro Ex instrument can be confi gured according to your requirements by choosing optional modules: analyzer, route, balancer, recorder, run up or ultrasound. Optional modules can be purchased also additionally and downloaded to the instrument without the need of sending it back to the factory.
VA3 Pro Ex is a professional vibration analyzer determined to protect your machinery. Build your kit according to your needs. Single or multi axis sensors, speed probe and other accessories are ready for your vibration analysis and predictive maintenance program on general.
EXPLOSIVE ATMOSPHERES
Machinery condition monitoring is a necessity also in hazardous industry environments such as mines, oil & gas, petrochemical etc. To protect human lives and equipment the devices used in such harsh areas has to be explosion proof. VA3 Pro Ex is ready at your service.
VERSATILITY & CONNECTIVITY
3x AC input – vibrations
3x DC input – process values
1x Trigger input (speed probe)
Triaxial sensor ready
IR temperature sensor
LED stroboscope / flashlight
Fast USB 2.0 communication
Robust Push-Pull connectors
VA3 PROEX FREE DDS SOFTWARE
Collect & Import
VA3 Pro Ex along with free DDS software can measure and store two basic measurements. Acceleration in g for the bearing condition and Velocity in mm/s (or ips) for the whole machine body condition.
Collect the data with VA3 Pro Ex regularly and import them into free DDS software. Follow vibration trends and observe the actual condition of your machines.
VA3 Pro Ex specifications :
Ex certification:
II 3G Ex ic op is IIC T3 Gc
Input channels:
3 x AC, ICP® power supply on/off
3 x DC for process values
1 x TACHO for speed probe / external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.5 Hz - 25 kHz (64 kHz sampling)
Minimum range: 0.5 Hz - 25 Hz (64 Hz sampling)
Sampling mode:
Fully simultaneous for all 3 channels
FFT resolution:
Min. 25 lines
Max. 25 600 lines
Measurement modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Recorder - raw signal recording for later post analysis
Run Up - run up and coast down measurements
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
LED stroboscope, LED torch
FASIT - Expert system for automatic fault detection
Vibration meter - basic vibration measurements
Software:
Free version of DDS software (limited database size)
Licensed DDS software
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
IR temperature measurement:
From -70˚C to 380˚C (-94˚F to 716˚F)
Trigger:
Manual, External, Amplitude, Tacho
Display:
Colour 240 x 320 pixels, TFT
Interface:
USB 2.0, 3.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery pack for more than 6 hours of continous operation
Case:
Aluminium - heavy duty
Weight:
780 g
Dimensions:
230 x 82 x 32 mm
Languages:
Languages: English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish.
Also you can check product : NEW Adash A4500 - VA5 Pro Vibration Analyzer - Thermal Imaging and Ultrasound Measurement
Adash A4300-VA3 is portable very modern construction one or two channel datacollector and analyser. Main features are small dimensions and weight (970 g), large LCD display with high resolution and powerful processor which provides fast data analysis.Adash A4300-VA3 is determined for bearing condition analysis, lubrication analysis and analyses of mechanical defects of machines – unbalance, misalignment, resonance, looseness. Enables to perform any of the FFT, order or time signal analyses. Instrument memory enables archiving of large amount of data.
NEW Adash A4300 VA3 Pro 3-Channel Vibration Analyzer, Data Collector (A4300 VA3 Pro 3)
The A4300 VA3 Pro is the newest addition to our range of portable devices for vibration diagnostics.
There are 2 signal inputs and 1 tacho/trigger input. Input 2 offers connectivity to a triaxial sensor, therefore all 3 channels can be measured simultaneously. The expert system developed by Adash can automatically detect machine faults such as unbalance, looseness, misalignment and bearing faults.
There is a non-contact IR temperature sensor (for immediate bearing temperature measurement) and a LED stroboscope/torch. The A4300 VA3 Pro is designed for one-handed operation. With a weight of just 780g and a battery life of morethan 10 hours of operation, the unit is suitable for long route measurements.
The A4300 VA3 Pro instrument can be confi gured according to your requirements by choosing optional modules: analyzer, route, balancer, recorder, run up or ultrasound. Optional modules can be purchased also additionally and downloaded to the instrument without the need of asending it back to the factory.
VA3 Pro 3-Channel Vibration Analyzer, Data Collector and Many More
A true vibration analyzer
real time FFTs, time waveforms etc.
Modularly based
buy only the modes you need
User friendly interface
graphical balancing mode
VA3 Pro Specifications :
Input channels:
3 x AC, ICP® power supply on/off
3 x DC for process values
1 x TACHO for speed probe / external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.5 Hz - 25 kHz (64 kHz sampling)
Minimum range: 0.5 Hz - 25 Hz (64 Hz sampling)
Sampling mode:
Fully simultaneous for all 3 channels
FFT resolution:
Min. 25 lines
Max. 25 600 lines
Measurement modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Recorder - raw signal recording for later post analysis
Run Up - run up and coast down measurements
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
LED stroboscope, LED torch
FASIT - Expert system for automatic fault detection
Vibration meter - basic vibration measurements
Software:
Free version of DDS software (limited database size)
Licensed DDS software
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
IR temperature measurement:
From -70˚C to 380˚C (-94˚F to 716˚F)
Trigger:
Manual, External, Amplitude, Tacho
Display:
Colour 240 x 320 pixels, TFT
Interface:
USB 2.0, 3.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery pack for more than 10 hours of continous operation
Case:
Aluminium - heavy duty (optionally with IP65 rating)
Weight:
780 g
Dimensions:
230 x 82 x 32 mm
Languages:
Languages: English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish
In The Box :
A4300 VA3 Vibration Meter
Charger
Leather holster
Carrying strap
Hard shell Profi Case
One standard sensor
One 6ft. coiled cable
Flat rare earth magnet
Order additional software modules, cables and accessories as needed
Also you can check product : NEW Adash A4300 VA3 Pro Ex - 3 Channel Vibration Analyzer and Data Collector
There are 2 signal inputs and 1 tacho/trigger input. Input 2 offers connectivity to a triaxial sensor, therefore all 3 channels can be measured simultaneously. The expert system developed by Adash can automatically detect machine faults such as unbalance, looseness, misalignment and bearing faults.
There is a non-contact IR temperature sensor (for immediate bearing temperature measurement) and a LED stroboscope/torch. The A4300 VA3 Pro is designed for one-handed operation. With a weight of just 780g and a battery life of morethan 10 hours of operation, the unit is suitable for long route measurements.
The A4300 VA3 Pro instrument can be confi gured according to your requirements by choosing optional modules: analyzer, route, balancer, recorder, run up or ultrasound. Optional modules can be purchased also additionally and downloaded to the instrument without the need of asending it back to the factory.
VA3 Pro 3-Channel Vibration Analyzer, Data Collector and Many More
A true vibration analyzer
real time FFTs, time waveforms etc.
Modularly based
buy only the modes you need
User friendly interface
graphical balancing mode
VA3 Pro Specifications :
Input channels:
3 x AC, ICP® power supply on/off
3 x DC for process values
1 x TACHO for speed probe / external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.5 Hz - 25 kHz (64 kHz sampling)
Minimum range: 0.5 Hz - 25 Hz (64 Hz sampling)
Sampling mode:
Fully simultaneous for all 3 channels
FFT resolution:
Min. 25 lines
Max. 25 600 lines
Measurement modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Recorder - raw signal recording for later post analysis
Run Up - run up and coast down measurements
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
LED stroboscope, LED torch
FASIT - Expert system for automatic fault detection
Vibration meter - basic vibration measurements
Software:
Free version of DDS software (limited database size)
Licensed DDS software
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
IR temperature measurement:
From -70˚C to 380˚C (-94˚F to 716˚F)
Trigger:
Manual, External, Amplitude, Tacho
Display:
Colour 240 x 320 pixels, TFT
Interface:
USB 2.0, 3.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery pack for more than 10 hours of continous operation
Case:
Aluminium - heavy duty (optionally with IP65 rating)
Weight:
780 g
Dimensions:
230 x 82 x 32 mm
Languages:
Languages: English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish
In The Box :
A4300 VA3 Vibration Meter
Charger
Leather holster
Carrying strap
Hard shell Profi Case
One standard sensor
One 6ft. coiled cable
Flat rare earth magnet
Order additional software modules, cables and accessories as needed
Also you can check product : NEW Adash A4300 VA3 Pro Ex - 3 Channel Vibration Analyzer and Data Collector
The A4300 VA3 Pro is the newest addition to our range of portable devices for vibration diagnostics.
The A4300 VA3 Pro instrument can be confi gured according to your requirements by choosing optional modules: analyzer, route, balancer, recorder, run up or ultrasound. Optional modules can be purchased also additionally and downloaded to the instrument without the need of sending it back to the factory.
There is a non-contact IR temperature sensor (for immediate bearing temperature measurement) and a LED stroboscope/torch. The A4300 VA3 Pro is designed for one-handed operation. With a weight of just 780g and a battery life of more than 10 hours of operation, the unit is suitable for long route measurements.
NEW Adash A4900 Vibrio M Ex Vibration Meter, Analyzer and Data Collector (A4900 Vibrio M EX)
The Vibrio M is now also avaliable in an Ex version. All basic vibrodiagnostics measurements are
available: Overall Values, FFT Spectrum, Time signal, Frequency bands, Route measurement or Expert system. You can listen to the signal with the headphones supplied with every unit.
The Vibrio M Ex comunicates with the DDS software, which you can download for free from the Adash website.
Vibrio M Ex instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and lubrication assessment. The A4900 – Vibrio M Ex is equipped with 4 MB of memory for data storage. Data memory allows you to perform off-route and route measurements. The professional software DDS for Vibrio M Ex can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included. The A4900 – Vibrio M Ex is supplied as a complete system including quality piezoelectric sensor, magnet and coiled cable for industrial use.
Vibrio M Ex Specifications
Input:
1 x ICP® powered accelerometer
Input range:
60 g PEAK with standard 100 mV/g sensor
e.g. 600 g PEAK with 10 mV/g sensor (sensitivity is adjustable in the device)
Measurements:
Velocity RMS: 10 - 1 000 Hz [mm/s, ips]
Velocity Peak: 10 - 1 000 Hz [mm/s, ips]
Acceleration RMS: 500 - 16 kHz [g]
Acceleration Peak: 500 - 16 kHz [g]
Velocity time: 1 - 1 000 Hz [mm/s, ips], 2048 samples
Velocity spectrum: 1 - 1 000 Hz [mm/s, ips], 800 lines
Acceleration time: 1 - 16 kHz [g], 2048 samples*
Acceleration spectrum: 1 - 16 kHz [g], 800 lines*
Acceleration Demod-Envelope RMS: 500 - 16 kHz [g]
Acceleration Demod-Envelope Peak: 500 - 16 kHz [g]*
Acceleration Demod-Envelope time: 500 - 16 kHz [g], 2048 samples
Acceleration Demod-Envelope spectrum: 500 - 16 kHz [g], 800 lines, range 400 Hz*
Displacement RMS: 2 - 100 Hz [µm, mil]
Displacement 0-Peak: 2 - 100 Hz [µm, mil]
Displacement Peak-Peak: 2 - 100 Hz [µm, mil]
Other functions:
Stethoscope for listening machine (bearing) noises
Memory:
4 MB for data:
120960 overall values
or 900 measurements of 800 line spectra
or 2048 sample time signals
Data storing:
Off-Route Route with DDS software (free download)
Interface:
USB 3.0, 2.0 compatible
Software:
Free version of DDS software (limited database size)
Display:
Colour graphic OLED display 128x128 pixels,
diagonal 1.5“ (38 mm)
Output:
1 x AC signal 8 Ω / 0,5 W for external headphones
(signal listening)
Power:
2 x AA 1.5V batteries
(alkaline, NiMH, Lithium - 8 hours of operation)
Temperature:
Operating: -5°C to 55°C
Dimensions:
150 x 60 x 35 mm
Weight:
330 g including batteries (without cable, sensor and magnet)
540 g including batteries, cable, sensor and magnet
Ex certification:
[II] Non-mining
[2] Zone 1
[G] Gas atmosphere
[Ex ib] Principle of protection: Intrinsic Safety EN 60079-11
[IIC] Gas group - Acetylene, Hydrogen
[T4] Temperature class 135°C
[Gb] Equipment Protection Level – Zone 1 (high protection)
Accessories :
vibration sensor
coiled cable to connect vibration sensor
magnetic base for vibration sensor
headphones with 3.5 mm jack
USB cable
measuring tip for manual pressure on the sensor
transport case
USB flash drive with the manual
Also you can check product : NEW Adash A4300 VA3 Pro 3-Channel Vibration Analyzer, Data Collector
available: Overall Values, FFT Spectrum, Time signal, Frequency bands, Route measurement or Expert system. You can listen to the signal with the headphones supplied with every unit.
The Vibrio M Ex comunicates with the DDS software, which you can download for free from the Adash website.
Vibrio M Ex instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and lubrication assessment. The A4900 – Vibrio M Ex is equipped with 4 MB of memory for data storage. Data memory allows you to perform off-route and route measurements. The professional software DDS for Vibrio M Ex can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included. The A4900 – Vibrio M Ex is supplied as a complete system including quality piezoelectric sensor, magnet and coiled cable for industrial use.
Vibrio M Ex Specifications
Input:
1 x ICP® powered accelerometer
Input range:
60 g PEAK with standard 100 mV/g sensor
e.g. 600 g PEAK with 10 mV/g sensor (sensitivity is adjustable in the device)
Measurements:
Velocity RMS: 10 - 1 000 Hz [mm/s, ips]
Velocity Peak: 10 - 1 000 Hz [mm/s, ips]
Acceleration RMS: 500 - 16 kHz [g]
Acceleration Peak: 500 - 16 kHz [g]
Velocity time: 1 - 1 000 Hz [mm/s, ips], 2048 samples
Velocity spectrum: 1 - 1 000 Hz [mm/s, ips], 800 lines
Acceleration time: 1 - 16 kHz [g], 2048 samples*
Acceleration spectrum: 1 - 16 kHz [g], 800 lines*
Acceleration Demod-Envelope RMS: 500 - 16 kHz [g]
Acceleration Demod-Envelope Peak: 500 - 16 kHz [g]*
Acceleration Demod-Envelope time: 500 - 16 kHz [g], 2048 samples
Acceleration Demod-Envelope spectrum: 500 - 16 kHz [g], 800 lines, range 400 Hz*
Displacement RMS: 2 - 100 Hz [µm, mil]
Displacement 0-Peak: 2 - 100 Hz [µm, mil]
Displacement Peak-Peak: 2 - 100 Hz [µm, mil]
Other functions:
Stethoscope for listening machine (bearing) noises
Memory:
4 MB for data:
120960 overall values
or 900 measurements of 800 line spectra
or 2048 sample time signals
Data storing:
Off-Route Route with DDS software (free download)
Interface:
USB 3.0, 2.0 compatible
Software:
Free version of DDS software (limited database size)
Display:
Colour graphic OLED display 128x128 pixels,
diagonal 1.5“ (38 mm)
Output:
1 x AC signal 8 Ω / 0,5 W for external headphones
(signal listening)
Power:
2 x AA 1.5V batteries
(alkaline, NiMH, Lithium - 8 hours of operation)
Temperature:
Operating: -5°C to 55°C
Dimensions:
150 x 60 x 35 mm
Weight:
330 g including batteries (without cable, sensor and magnet)
540 g including batteries, cable, sensor and magnet
Ex certification:
[II] Non-mining
[2] Zone 1
[G] Gas atmosphere
[Ex ib] Principle of protection: Intrinsic Safety EN 60079-11
[IIC] Gas group - Acetylene, Hydrogen
[T4] Temperature class 135°C
[Gb] Equipment Protection Level – Zone 1 (high protection)
Accessories :
vibration sensor
coiled cable to connect vibration sensor
magnetic base for vibration sensor
headphones with 3.5 mm jack
USB cable
measuring tip for manual pressure on the sensor
transport case
USB flash drive with the manual
Also you can check product : NEW Adash A4300 VA3 Pro 3-Channel Vibration Analyzer, Data Collector
Vibrio M Ex instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and lubrication assessment. The A4900 – Vibrio M Ex is equipped with 4 MB of memory for data storage. Data memory allows you to perform off-route and route measurements. The professional software DDS for Vibrio M Ex can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included. The A4900 – Vibrio M Ex is supplied as a complete system including quality piezoelectric sensor, magnet and coiled cable for industrial use.
- 1