NEW Benstone Instruments impaq Plus 4 Vibration Analyzer and Sound
Impaq Plus is a fully rugged portable 4 channel real-time analyzer built for advanced noise and vibration measurements in the field. Manufactured with a rugged enclosure by a dual injection molding process and protective sealing to provide an IP 65 rating for measurement in harsh environments. Equipped with a large 10.1” multi-touch color display, information is not only on display, but a more intuitive user interface with keypads on the left side. Impaq Plus acquires measurement signal with precision 24 bit sigma delta AD converters to provide a high dynamic range and a up to 40 kHz maximum bandwidth.
£8,147.19
Born for advanced field testing
Impaq Plus is a fully rugged portable 4 channel real-time analyzer built for advanced noise and vibration measurements in the field. Manufactured with a rugged enclosure by a dual injection molding process and protective sealing to provide an IP 65 rating for measurement in harsh environments. Equipped with a large 10.1” multi-touch color display, information is not only on display, but a more intuitive user interface with keypads on the left side. Impaq Plus acquires measurement signal with precision 24 bit sigma delta AD converters to provide a high dynamic range and a up to 40 kHz maximum bandwidth.
With optional software modules, the impaq Plus can conduct FFT spectrum analysis, Order Tracking Analysis and Octave spectrum analysis at the same time. Besides, it can be used as a digital signal recorder for continuous raw data recording and playback analysis. The optional balancing module supports all kinds of field balancing tasks with all the most advanced features.
Multiple Analysis
impaq Plus supports multiple analysis which allows you to run different analysis modules, such
as FFT analysis, Octave spectrum, order tracking analysis and raw data recording, at the same time.
Modular Software
The impaq Plus’s modular software allows for the proper configuration of your analyzer. Optional modules available are raw data recorder, FFT spectrum analysis, 1/3 Octave spectrum analysis, computed order tracking analysis and Rotor balancing.
Raw Data Recorder
The Raw Data Recorder software module allows the user to measure analog signals in the Recorder mode or Real-time Recorder mode and store the raw data signal directly to the hard drive or memory. Replay the stored raw signal in the playback mode with selected analysis modules as if the signal is from a real-time acquisition.
FFT Spectrum Analysis module
The FFT (Fourier Transform) spectrum analysis provides up to 14 different measurement functions for your sound and vibration needs. Continuous start-up/ coast-down spectrum and display the results on a 3D waterfall/ intensity plot. Perform modal, ODS, envelope testing and more.
General sound & vibration analysis
Modal testing and ODS measurement
Sound intensity measurement
Sound and vibration quality measurement
Stiffness measurement
Bearing diagnosis (envelope spectrum and waveform)
Variable speed machine measurement
Octave spectrum analysis module
The octave spectrum analysis utilizes parallel time domain filters to generate octave, 1/3 octave or 1/12 octave spectrum. Conforming to IEC 61260 and IEC 61672 standards, this module is suitable for evaluating the sound or vibration severity. Built-in user defined weighting functions supports specific measurements such as: ISO 6954 (vibration on ships), ISO 8041 and ISO 2631 (human vibration) to name a few. Many high-tech factories are concerned about floor vibration. User defined VC curves can be displayed on the Octave spectrum plot to determine the level of vibration.
Computed Order Tracking module
The computed order tracking program is designed to measure sound and vibration on varying speed machines. A digital re-sampling algorithm is used to make the spectral resolutions be the same at different rotation speeds. Typical applications for this software module are NVH (Noise, Vibration, Harshness) testing of vehicles or advanced vibration analysis of turbine machines. Order spectrum, order traces, filtered or unfiltered orbits, gap reading, and centerline of a shaft are accurately measured and displayed during a start-up or coast-down process. The user can input geometric position(s) of the vibration sensors to display orbit and shaft centerline motion, which relates to the
realistic behavior of a turbine machine.
Rotor Balancing module
The Impaq Plus’s rotor balancing package can balance your rotating machines in the field with industry leading balancing techniques like; single plane, dual plane, overhung dual plane, 3 plane, 4 plane and 3 weights balancing. This advanced balancing software makes it very simple to balance machines in-field with a very high level of accuracy. Now with multiple-point balancing, vibration in both horizontal and vertical directions are minimized at the same time. By enabling coast-down measurements for 1X vibration, the heavy spot is identified correctly with only one measurement, saving you time, money and
increasing safety. This technique prevents the user from danger by putting the trial weights in the wrong place and shortens the time required to balance. Other features / functions are:
Multi-point balancing
Component calculation
Drill depth calculation
Allowable residual unbalance calculated from the ISO 1940 standard
Unequal radii calculation
Decoupled balancing (couple static)
Review historical vibration data on a polar plot.
Review historical balancing data on a polar plot
Heavy spot estimation with one shot measurement.
Redo a previous balancing job with saved balancing factors.
SPECS :
Operating system
Windows 10 IoT enterprise
Input channels
4 analog channels and 1 tacho channel
Connector
Channel 1 ~ channel 4: BNC. Tri-axial: Fischer Core Series 103*, 6 pins
Tacho input: Fischer Core Series 103*, 7 pins. USB: USB 3.1, Type-A connector
Channel coupling
AC, DC, IEPE
Tacho input
TTL signal, with built-in power supply
CPU
Intel Atom® Processor N4200
Internal memory
256G SSD
Battery
14.4V, 2270mAh, 32.7W* (x2, swappable)
Interface
USB 3.1 type A connector x1
LCD display
1280x800 10.1” multi-touch color screen
Operating temperature
-10 deg C to 50 deg C
Product approvals
CE, RoHs, REACH, China RoHs,
Regulatory Compliance Mark (RCM), UKCA, FCC, KC
Drop test
1.2 meters - MIL-STD 810H
Vibration test
MIL STD 810 transportation
Sealing / Ruggedness
EN60529 IP65
Housing material
Dual material mold injection
Weight
1.9 kg with dual batteries, 1.72 kg with single battery
Size
300 x 195 x 50 mm
Input signal range
± 5Volt, ± 20Volt
A/D converter
24-bit sigma-delta A/D converter
Frequency range
0 Hz~40 kHz (102.4 kHz Max sampling rate)
Feature for Raw Data Recorder
Recorded data
Raw time data and TTL tacho signal
Monitor display
Recorder mode: Waveform, continuous waveform or spectrum
Real-time recorder mode: same as real-time measurement setting.
Storage media
Internal 256G SSD
Data review
Replay data in Playback mode
Maximum bandwidth
40 kHz with 4 channels on, plus tacho channel
Maximum length of recording
limited by memory space
Recording stop
by time, rpm, file size or manual
Feature for FFT Analysis
FFT real time rate
40 kHz with 4 channels on
FFT resolution
100-51,200 lines
Spectral map
3D waterfall or intensity plots for continuous spectrum measurements
Time windows
Hanning, hamming, flattop, rectangular, force, exponential Bartlett, Blackman, Kaiser
Analysis functions
Complex spectrum, power spectrum, cross power spectrum, FRF, time waveform, envelope waveform, envelope spectrum, coherence, PSD, Cepstrum, overall level, mean trend, rate trend, rotation speed.
Engineering units
Automatic units transform with pre-defined conversion table
Zoom FFT
Yes
Average
Off, Linear, exponential, time, peak hold
Trigger
On/Off, triggering source, pre/ post triggering, triggering slope and
triggering level
Map functions
Time waveform, complex spectrum, auto spectrum, cross spectrum
Control of Map measurement
Free run, by total count, total time, armed by time step or RPM step
Cursor
Single, harmonic, dual, side band, peak cursor, cursor marker
Envelope filters
500~2kHz, 1k~2.5kHz, 2k~5kHz, 5k~10kHz or user defined.
2D Plot format
Linear, Polar, Bode, Real Imaginery, Nyquist, Accelerance/Mobility/Compliance
3D Plot format
Waterfall, intensity map, overlapped
Mathematic operation
Unit conversion, FFT, iFFT, integration, differentiation, band pass filter,
high pass filter, low pass filter, band notch filter, scaling, weighting,
window, reciprocal, detrend, redo, undo.
Also you can check product : NEW Benstone Instruments fieldpaq II Portable Sound & Vibration Analyzers
Impaq Plus is a fully rugged portable 4 channel real-time analyzer built for advanced noise and vibration measurements in the field. Manufactured with a rugged enclosure by a dual injection molding process and protective sealing to provide an IP 65 rating for measurement in harsh environments. Equipped with a large 10.1” multi-touch color display, information is not only on display, but a more intuitive user interface with keypads on the left side. Impaq Plus acquires measurement signal with precision 24 bit sigma delta AD converters to provide a high dynamic range and a up to 40 kHz maximum bandwidth.
With optional software modules, the impaq Plus can conduct FFT spectrum analysis, Order Tracking Analysis and Octave spectrum analysis at the same time. Besides, it can be used as a digital signal recorder for continuous raw data recording and playback analysis. The optional balancing module supports all kinds of field balancing tasks with all the most advanced features.
Multiple Analysis
impaq Plus supports multiple analysis which allows you to run different analysis modules, such
as FFT analysis, Octave spectrum, order tracking analysis and raw data recording, at the same time.
Modular Software
The impaq Plus’s modular software allows for the proper configuration of your analyzer. Optional modules available are raw data recorder, FFT spectrum analysis, 1/3 Octave spectrum analysis, computed order tracking analysis and Rotor balancing.
Raw Data Recorder
The Raw Data Recorder software module allows the user to measure analog signals in the Recorder mode or Real-time Recorder mode and store the raw data signal directly to the hard drive or memory. Replay the stored raw signal in the playback mode with selected analysis modules as if the signal is from a real-time acquisition.
FFT Spectrum Analysis module
The FFT (Fourier Transform) spectrum analysis provides up to 14 different measurement functions for your sound and vibration needs. Continuous start-up/ coast-down spectrum and display the results on a 3D waterfall/ intensity plot. Perform modal, ODS, envelope testing and more.
General sound & vibration analysis
Modal testing and ODS measurement
Sound intensity measurement
Sound and vibration quality measurement
Stiffness measurement
Bearing diagnosis (envelope spectrum and waveform)
Variable speed machine measurement
Octave spectrum analysis module
The octave spectrum analysis utilizes parallel time domain filters to generate octave, 1/3 octave or 1/12 octave spectrum. Conforming to IEC 61260 and IEC 61672 standards, this module is suitable for evaluating the sound or vibration severity. Built-in user defined weighting functions supports specific measurements such as: ISO 6954 (vibration on ships), ISO 8041 and ISO 2631 (human vibration) to name a few. Many high-tech factories are concerned about floor vibration. User defined VC curves can be displayed on the Octave spectrum plot to determine the level of vibration.
Computed Order Tracking module
The computed order tracking program is designed to measure sound and vibration on varying speed machines. A digital re-sampling algorithm is used to make the spectral resolutions be the same at different rotation speeds. Typical applications for this software module are NVH (Noise, Vibration, Harshness) testing of vehicles or advanced vibration analysis of turbine machines. Order spectrum, order traces, filtered or unfiltered orbits, gap reading, and centerline of a shaft are accurately measured and displayed during a start-up or coast-down process. The user can input geometric position(s) of the vibration sensors to display orbit and shaft centerline motion, which relates to the
realistic behavior of a turbine machine.
Rotor Balancing module
The Impaq Plus’s rotor balancing package can balance your rotating machines in the field with industry leading balancing techniques like; single plane, dual plane, overhung dual plane, 3 plane, 4 plane and 3 weights balancing. This advanced balancing software makes it very simple to balance machines in-field with a very high level of accuracy. Now with multiple-point balancing, vibration in both horizontal and vertical directions are minimized at the same time. By enabling coast-down measurements for 1X vibration, the heavy spot is identified correctly with only one measurement, saving you time, money and
increasing safety. This technique prevents the user from danger by putting the trial weights in the wrong place and shortens the time required to balance. Other features / functions are:
Multi-point balancing
Component calculation
Drill depth calculation
Allowable residual unbalance calculated from the ISO 1940 standard
Unequal radii calculation
Decoupled balancing (couple static)
Review historical vibration data on a polar plot.
Review historical balancing data on a polar plot
Heavy spot estimation with one shot measurement.
Redo a previous balancing job with saved balancing factors.
SPECS :
Operating system
Windows 10 IoT enterprise
Input channels
4 analog channels and 1 tacho channel
Connector
Channel 1 ~ channel 4: BNC. Tri-axial: Fischer Core Series 103*, 6 pins
Tacho input: Fischer Core Series 103*, 7 pins. USB: USB 3.1, Type-A connector
Channel coupling
AC, DC, IEPE
Tacho input
TTL signal, with built-in power supply
CPU
Intel Atom® Processor N4200
Internal memory
256G SSD
Battery
14.4V, 2270mAh, 32.7W* (x2, swappable)
Interface
USB 3.1 type A connector x1
LCD display
1280x800 10.1” multi-touch color screen
Operating temperature
-10 deg C to 50 deg C
Product approvals
CE, RoHs, REACH, China RoHs,
Regulatory Compliance Mark (RCM), UKCA, FCC, KC
Drop test
1.2 meters - MIL-STD 810H
Vibration test
MIL STD 810 transportation
Sealing / Ruggedness
EN60529 IP65
Housing material
Dual material mold injection
Weight
1.9 kg with dual batteries, 1.72 kg with single battery
Size
300 x 195 x 50 mm
Input signal range
± 5Volt, ± 20Volt
A/D converter
24-bit sigma-delta A/D converter
Frequency range
0 Hz~40 kHz (102.4 kHz Max sampling rate)
Feature for Raw Data Recorder
Recorded data
Raw time data and TTL tacho signal
Monitor display
Recorder mode: Waveform, continuous waveform or spectrum
Real-time recorder mode: same as real-time measurement setting.
Storage media
Internal 256G SSD
Data review
Replay data in Playback mode
Maximum bandwidth
40 kHz with 4 channels on, plus tacho channel
Maximum length of recording
limited by memory space
Recording stop
by time, rpm, file size or manual
Feature for FFT Analysis
FFT real time rate
40 kHz with 4 channels on
FFT resolution
100-51,200 lines
Spectral map
3D waterfall or intensity plots for continuous spectrum measurements
Time windows
Hanning, hamming, flattop, rectangular, force, exponential Bartlett, Blackman, Kaiser
Analysis functions
Complex spectrum, power spectrum, cross power spectrum, FRF, time waveform, envelope waveform, envelope spectrum, coherence, PSD, Cepstrum, overall level, mean trend, rate trend, rotation speed.
Engineering units
Automatic units transform with pre-defined conversion table
Zoom FFT
Yes
Average
Off, Linear, exponential, time, peak hold
Trigger
On/Off, triggering source, pre/ post triggering, triggering slope and
triggering level
Map functions
Time waveform, complex spectrum, auto spectrum, cross spectrum
Control of Map measurement
Free run, by total count, total time, armed by time step or RPM step
Cursor
Single, harmonic, dual, side band, peak cursor, cursor marker
Envelope filters
500~2kHz, 1k~2.5kHz, 2k~5kHz, 5k~10kHz or user defined.
2D Plot format
Linear, Polar, Bode, Real Imaginery, Nyquist, Accelerance/Mobility/Compliance
3D Plot format
Waterfall, intensity map, overlapped
Mathematic operation
Unit conversion, FFT, iFFT, integration, differentiation, band pass filter,
high pass filter, low pass filter, band notch filter, scaling, weighting,
window, reciprocal, detrend, redo, undo.
Also you can check product : NEW Benstone Instruments fieldpaq II Portable Sound & Vibration Analyzers
- Availability: 14 In Stock
- Model: impaq Plus
-
Brand:
