EASY-LASER
The XT770 Shaft GEO system has all the programs and functions you need to install and keep your machines up and running. Compared to the standard XT770 Shaft it also comes with a separate laser transmitter. With XT770 Shaft GEO you can carry out the following:
Align the machine
Check soft foot
Check twist and flatness
Check straightness
Measure machine movement over time
With Easy-Laser XT770 Shaft you can solve measurement and alignment problems of all kinds on most machine types. With Easy-Laser XT770 Shaft you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more. With the XT770 you have a choice of several different shaft alignment measurement methods, e.g. continuous sweep and multipoint.
The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems. It also provides higher accuracy when backlash in the coupling is present. In addition, dot laser allows you to check more things when installing a machine, e.g. twist of foundation and bearing clearance. With the XT660 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.
The Easy-Laser XT550 Shaft system is developed for hazardous areas and is easily operated through our XT Alignment app. It is an advanced measurement system for alignment of horizontal and vertical/flange mounted rotating machinery. The system comes with Easy-Laser’s dot laser technology, allowing you to measure large machinery and long spans.
The Easy-Laser XT770 is our flagship laser alignment system in the Generation XT series, offering exceptional power and versatility for precision shaft alignment. It provides the flexibility to display alignment data on a range of handheld devices, including our own Easy-Laser® XT ergonomic and rugged, IP66/67-approved shockproof alignment computer, which features a built-in 13MP camera for documentation and HDMI video output. With the Easy-Laser XT770, you can perform accurate laser shaft alignment for horizontal and vertically/flange mounted machines, as well as align unlimited machine trains, measure twist of foundation, soft foot, bearing clearance, and more. The EasyTrend program allows you to track machine movement over time, making it useful for checking thermal expansion (thermal growth) and pipe strain issues, among other things.
Easy-Laser XT440 Shaft is a member of our Generation XT alignment systems, built upon our cross-platform technology. This means you will be able to display data on a multitude of different handheld devices, including our own XT12. Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device. Whatever you choose, the intuitive user interface is the same across all platforms.
Easy-Laser XT660 Shaft is an advanced measurement system for alignment of horizontal and vertical/flange mounted rotating machinery. With the XT660 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems.
Easy-Laser XT440 Shaft is a member of our Generation XT alignment systems, built upon our cross-platform technology. This means you will be able to display data on a multitude of different handheld devices, including our own XT12. With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process.
Easy-Laser E540 is a very powerful shaft alignment system, with the ideal balance between performance and price. Program that guides step-by-step with both icons and text makes the system very easy to use for everyone, regardless of prior knowledge. The E540 system includes measurement programs for horizontal machines, vertical machines and alignment of machine trains with three machines.
The Easy-Laser® E420 represents a leap forward in entry level laser systems for shaft alignment and can be used in the toughest environments. The Easy-Laser® E420 represents a leap forward in entry level laser systems for shaft alignment. The new E420 makes aligning various sizes of wind turbines gear boxes and generators a breeze -and with the new special brackets available for alignment with locked rotors, your alignment jobs are even more safe.
NEW Easy-Laser XT770 Shaft GEO Laser Shaft Alignment and Geo Applications (XT770 Shaft GEO)
The complete laser alignment system
The XT770 Shaft GEO system has all the programs and functions you need to install and keep your machines up and running. Compared to the standard XT770 Shaft it also comes with a separate laser transmitter. With XT770 Shaft GEO you can carry out the following:
Align the machine
Check soft foot
Check twist and flatness
Check straightness
Measure machine movement over time
With XT770 Shaft GEO you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure straightness, flatness and twist of foundation, soft foot, bearing clearance, and more.
2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position.
You have a choice of five shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.
Laser transmitters for geometric measurements
The system also includes laser transmitter XT20 or XT22, which allow you to take flatness and straightness measurements with the highest reliability and precision.
XT20 is perfect for checking flatness and straightness during machine installation or surface flatness of machined parts.
XT22 also lets you point the laser beam perpendicular to the laser plane. It provides more options for geometrical measurements, and even higher accuracy and precision.
Bore alignment capabilities
The Bore center program is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job.
Use with any display device
As all other XT systems, the XT770 Shaft GEO can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit.
Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.
SYSTEM PARTS
Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
XT20 Laser transmitter
Laser transmitter XT20 can be used to measure flatness and straightness. The laser beam can sweep 360° with a measurement distance of up to 20 metres [65´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw. The laser head fine turning knob makes it very easy to point the beam at the detector also on long distances (gear ratio 1:132).
We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).
The XT transmitters have wireless connection to our XT Alignment App. This means that you get warning messages during measurement about events that can affect the result negatively, for example if the transmitter position might have been affected, or temperature changes inside the unit. We can also let the app guide you step-by-step when calibrating the levels before measuring.
The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.
The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.
XT22 Laser transmitter
Laser transmitter XT22 can be used to measure flatness, straightness, squareness, level and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw.
We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).
The laser beam can be pointed perpendicular to the flatness plane, within 0.01 mm/m [0.01 mils/inch]. XT22 has a fine turning mechanism for the laser head with a gear ratio of 1:1320, which makes it super easy to point the beam at the detector also on very long distances.
The fiber-coupled laser creates an extremely smooth laser beam profile, free from reflections and irregularities. This means that the laser beam will have very good optical properties in terms of straightness (± 0.003 mm [± 0.12 mils]).
The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.
The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.
TECHNICAL DATA:
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT70-M / XT70-S
Communication
BT wireless technology
Type of detector
2 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Includes:
1 Measuring unit XT70-M
1 Measuring unit XT70-S
1 Laser transmitter XT20 or XT22
1 Multi-bracket for laser transmitter
2 Shaft brackets with chains and rods 120 mm [4.72"]
1 Set of rods 4×75 mm [2.95"]
2 sets of rods 4×120 mm [4.72"]
1 Magnet base
1 Magnet base with turnable head
2 Offset brackets
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying Large GEO, with wheels
1 Set of QR code stickers
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : USED Easy-Laser E420 Shaft Alignment System - Calibrated
The XT770 Shaft GEO system has all the programs and functions you need to install and keep your machines up and running. Compared to the standard XT770 Shaft it also comes with a separate laser transmitter. With XT770 Shaft GEO you can carry out the following:
Align the machine
Check soft foot
Check twist and flatness
Check straightness
Measure machine movement over time
With XT770 Shaft GEO you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure straightness, flatness and twist of foundation, soft foot, bearing clearance, and more.
2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position.
You have a choice of five shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.
Laser transmitters for geometric measurements
The system also includes laser transmitter XT20 or XT22, which allow you to take flatness and straightness measurements with the highest reliability and precision.
XT20 is perfect for checking flatness and straightness during machine installation or surface flatness of machined parts.
XT22 also lets you point the laser beam perpendicular to the laser plane. It provides more options for geometrical measurements, and even higher accuracy and precision.
Bore alignment capabilities
The Bore center program is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job.
Use with any display device
As all other XT systems, the XT770 Shaft GEO can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit.
Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.
SYSTEM PARTS
Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
XT20 Laser transmitter
Laser transmitter XT20 can be used to measure flatness and straightness. The laser beam can sweep 360° with a measurement distance of up to 20 metres [65´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw. The laser head fine turning knob makes it very easy to point the beam at the detector also on long distances (gear ratio 1:132).
We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).
The XT transmitters have wireless connection to our XT Alignment App. This means that you get warning messages during measurement about events that can affect the result negatively, for example if the transmitter position might have been affected, or temperature changes inside the unit. We can also let the app guide you step-by-step when calibrating the levels before measuring.
The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.
The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.
XT22 Laser transmitter
Laser transmitter XT22 can be used to measure flatness, straightness, squareness, level and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw.
We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).
The laser beam can be pointed perpendicular to the flatness plane, within 0.01 mm/m [0.01 mils/inch]. XT22 has a fine turning mechanism for the laser head with a gear ratio of 1:1320, which makes it super easy to point the beam at the detector also on very long distances.
The fiber-coupled laser creates an extremely smooth laser beam profile, free from reflections and irregularities. This means that the laser beam will have very good optical properties in terms of straightness (± 0.003 mm [± 0.12 mils]).
The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.
The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.
TECHNICAL DATA:
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT70-M / XT70-S
Communication
BT wireless technology
Type of detector
2 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Includes:
1 Measuring unit XT70-M
1 Measuring unit XT70-S
1 Laser transmitter XT20 or XT22
1 Multi-bracket for laser transmitter
2 Shaft brackets with chains and rods 120 mm [4.72"]
1 Set of rods 4×75 mm [2.95"]
2 sets of rods 4×120 mm [4.72"]
1 Magnet base
1 Magnet base with turnable head
2 Offset brackets
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying Large GEO, with wheels
1 Set of QR code stickers
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : USED Easy-Laser E420 Shaft Alignment System - Calibrated
The XT770 Shaft GEO system has all the programs and functions you need to install and keep your machines up and running. Compared to the standard XT770 Shaft it also comes with a separate laser transmitter. With XT770 Shaft GEO you can carry out the following:
Align the machine
Check soft foot
Check twist and flatness
Check straightness
Measure machine movement over time
NEW Easy-Laser XT770 Laser Shaft Alignment (XT770)
With Easy-Laser XT770 Shaft you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more.
2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position. We call it 360° Live adjustment.
With the XT770 you have a choice of several different shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.
Dynamic measurement
The EasyTrend program allows you to keep track of machine movement over time, during operation. This is useful when checking for thermal expansion and pipe strain issues for example. This type of measurement requires special DM brackets which can be ordered separately.
Bore alignment with XT770
The Bore center program is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job.
Use with any device
As all other XT systems, the XT770 can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit.
Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get the it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.
SYSTEM PARTS
Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT70-M / XT70-S
Communication
BT wireless technology
Type of detector
2 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Contains :
1 Measuring unit XT70-M
1 Measuring unit XT70-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95"]
4 Rods 120 mm [4.72"]
2 Magnet bases
2 Offset brackets
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : NEW Easy-Laser XT770 Shaft GEO Laser Shaft Alignment and Geo Applications
2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position. We call it 360° Live adjustment.
With the XT770 you have a choice of several different shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.
Dynamic measurement
The EasyTrend program allows you to keep track of machine movement over time, during operation. This is useful when checking for thermal expansion and pipe strain issues for example. This type of measurement requires special DM brackets which can be ordered separately.
Bore alignment with XT770
The Bore center program is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job.
Use with any device
As all other XT systems, the XT770 can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit.
Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get the it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.
SYSTEM PARTS
Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT70-M / XT70-S
Communication
BT wireless technology
Type of detector
2 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Contains :
1 Measuring unit XT70-M
1 Measuring unit XT70-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95"]
4 Rods 120 mm [4.72"]
2 Magnet bases
2 Offset brackets
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : NEW Easy-Laser XT770 Shaft GEO Laser Shaft Alignment and Geo Applications
With Easy-Laser XT770 Shaft you can solve measurement and alignment problems of all kinds on most machine types. With Easy-Laser XT770 Shaft you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more. With the XT770 you have a choice of several different shaft alignment measurement methods, e.g. continuous sweep and multipoint.
NEW Easy-Laser XT660 Laser Shaft Alignment System (XT660)
The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems. It also provides higher accuracy when backlash in the coupling is present. In addition, dot laser allows you to check more things when installing a machine, e.g. twist of foundation and bearing clearance.
With the XT660 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.
The XT products are rugged, rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the tougher jobs.
User-friendly
Use the rugged Easy-Laser XT display unit, or install the free XT Alignment app on your iOS or Android device. The intuitive user interface guides you through the measurement process.
Unique documentation possibilities
The XT display unit has a 13MP camera. You can also get the XT display unit with a built-in IR camera. This means you can add a thermal image of the machine before and after alignment. You can easily create and share a PDF report containing all measurement data and images.
Measuring units XT60-M / XT60-S
The XT60 measuring units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT60-M / XT60-S
Communication
BT wireless technology
Type of detector
1 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Contains :
1 Measuring unit XT60-M
1 Measuring unit XT60-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95"]
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : NEW Easy-Laser XT770 Laser Shaft Alignment
With the XT660 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.
The XT products are rugged, rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the tougher jobs.
User-friendly
Use the rugged Easy-Laser XT display unit, or install the free XT Alignment app on your iOS or Android device. The intuitive user interface guides you through the measurement process.
Unique documentation possibilities
The XT display unit has a 13MP camera. You can also get the XT display unit with a built-in IR camera. This means you can add a thermal image of the machine before and after alignment. You can easily create and share a PDF report containing all measurement data and images.
Measuring units XT60-M / XT60-S
The XT60 measuring units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT60-M / XT60-S
Communication
BT wireless technology
Type of detector
1 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Contains :
1 Measuring unit XT60-M
1 Measuring unit XT60-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95"]
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : NEW Easy-Laser XT770 Laser Shaft Alignment
The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems. It also provides higher accuracy when backlash in the coupling is present. In addition, dot laser allows you to check more things when installing a machine, e.g. twist of foundation and bearing clearance. With the XT660 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.
NEW Easy-Laser XT550 Ex/ATEX Laser Shaft Alignment System (XT550 Ex/ATEX)
Shaft alignment in potentially explosive areas
The Easy-Laser® XT550 Shaft system is developed for hazardous areas and is easily operated through our XT Alignment app. It is an advanced measurement system for alignment of horizontal and vertical/flange mounted rotating machinery. With XT550 you can carry out the following:
Align the machine
Check base twist
Check bearing play
Check soft foot
Document and share the results
The XT550 alignment system has all the features of the XT660 with one major difference – the measuring units are intrinsically safe, which allows the system to be used in potentially hazardous areas.
The system comes with Easy-Laser’s dot laser technology, allowing you to measure large machinery and long spans. The measuring units are approved in accordance with the latest ATEX directive*, and are rated both IP66 and IP67 water and dust proof.
Choose your own display unit
System XT550 comes in two configurations; with or without the ATEX approved ecom Tab-Ex® display unit. The XT Alignment app runs on most iOS and Android units, as well as our own XT display unit. However, those are not allowed in potentially explosive areas, but makes for a perfect complement for use in other places.
Note. For use in Ex-classed areas, the mobile device you’re using must be approved for these areas. Always check for approval labels before entering potentially explosive areas. The XT display unit is not Ex/ATEX approved.
*The XT50 measuring units are ATEX approved which means means they comply with the Essential Health and Safety Requirements relating to the design of products intended for use in potentially explosive atmospheres.
SYSTEM PARTS
Measuring units XT50-M / XT50-S
The XT50 measuring units are ATEX approved for use potentially explosive environments. The units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
ATEX approved.
OLED display shows the angle of the unit.
Slideable target.
20 hours operating time.
Display unit ecom Tab-Ex (optional)
Based on Samsung GALAXY Tab Active, ecom´s hazardous area tablet is certified for use in Zone 1/ 21 & DIV 1 hazardous areas.
Features
Glove-enabled touch-screen
Large 8" display
ATEX approved
SPECS :
Display Unit
Name
ecom Tab-Ex 3
Type of display/size
TFT 8" colour screen
Operating temperature
-20–55 °C
Communication
Bluetooth® 5.0 Wireless technology, WiFi
Camera
13 Mp with flash (rear), 5 Mp (front)
Dimensions
WxHxD: 263x162x26 mm [10.3x6.4x1.0"]
Weight (without batteries)
1100 g [2.42 lbs]
Operating time
Up to 11 h continuously
Operating system
Android
ATEX/UKCA Ex classification
II 2G Ex db ia IIC T6 Gb IP64
II 2D Ex ia tb IIIC T80°C Db
-20°C ≤ Ta ≤ 55 °C
IECEx classification
Ex db ia IIC T6 Gb IP64
Ex ia tb IIIC T80°C Db
-20°C ≤ Ta ≤ 55°C
Ex certificate number
EPS 22 ATEX 1055X, IECEx EPS 22.0014X, EPS 22 UKEX 1055X
Measuring Units
Name
XT50-M / XT50-S
Communication
BT wireless technology
Type of detector
1 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.5x50.9 mm [3.0x3.0x2.0"]
Weight
316 g [11.1 oz]
OLED display
128x64 pixels
Operating time
Up to 20 h continuously
Ex classification
II 2 G Ex ib op is IIC T4 Gb, -10°C ≤ Ta ≤ 50°C
II 2 D Ex ib op is IIIC T135°C Db, -10°C ≤ Ta ≤ 50°C
Ex certificate number
Presafe 17 ATEX 10552X, IECEx PRE 17.0049X
Contains :
1 Measuring unit XT50-M
1 Measuring unit XT50-S
2 Shaft brackets with chains and rods
4 Rods 60 mm [2.36"]
2 Rods 120 mm [4.72"]
2 Extension chains 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Rod tool
1 Charger (100–240 V AC)
1 DC split cable for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Ex/ATEX
Optional
1 Display unit ecom Tab-Ex
Also you can check product : NEW Easy-Laser XT660 Laser Shaft Alignment System
The Easy-Laser® XT550 Shaft system is developed for hazardous areas and is easily operated through our XT Alignment app. It is an advanced measurement system for alignment of horizontal and vertical/flange mounted rotating machinery. With XT550 you can carry out the following:
Align the machine
Check base twist
Check bearing play
Check soft foot
Document and share the results
The XT550 alignment system has all the features of the XT660 with one major difference – the measuring units are intrinsically safe, which allows the system to be used in potentially hazardous areas.
The system comes with Easy-Laser’s dot laser technology, allowing you to measure large machinery and long spans. The measuring units are approved in accordance with the latest ATEX directive*, and are rated both IP66 and IP67 water and dust proof.
Choose your own display unit
System XT550 comes in two configurations; with or without the ATEX approved ecom Tab-Ex® display unit. The XT Alignment app runs on most iOS and Android units, as well as our own XT display unit. However, those are not allowed in potentially explosive areas, but makes for a perfect complement for use in other places.
Note. For use in Ex-classed areas, the mobile device you’re using must be approved for these areas. Always check for approval labels before entering potentially explosive areas. The XT display unit is not Ex/ATEX approved.
*The XT50 measuring units are ATEX approved which means means they comply with the Essential Health and Safety Requirements relating to the design of products intended for use in potentially explosive atmospheres.
SYSTEM PARTS
Measuring units XT50-M / XT50-S
The XT50 measuring units are ATEX approved for use potentially explosive environments. The units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
ATEX approved.
OLED display shows the angle of the unit.
Slideable target.
20 hours operating time.
Display unit ecom Tab-Ex (optional)
Based on Samsung GALAXY Tab Active, ecom´s hazardous area tablet is certified for use in Zone 1/ 21 & DIV 1 hazardous areas.
Features
Glove-enabled touch-screen
Large 8" display
ATEX approved
SPECS :
Display Unit
Name
ecom Tab-Ex 3
Type of display/size
TFT 8" colour screen
Operating temperature
-20–55 °C
Communication
Bluetooth® 5.0 Wireless technology, WiFi
Camera
13 Mp with flash (rear), 5 Mp (front)
Dimensions
WxHxD: 263x162x26 mm [10.3x6.4x1.0"]
Weight (without batteries)
1100 g [2.42 lbs]
Operating time
Up to 11 h continuously
Operating system
Android
ATEX/UKCA Ex classification
II 2G Ex db ia IIC T6 Gb IP64
II 2D Ex ia tb IIIC T80°C Db
-20°C ≤ Ta ≤ 55 °C
IECEx classification
Ex db ia IIC T6 Gb IP64
Ex ia tb IIIC T80°C Db
-20°C ≤ Ta ≤ 55°C
Ex certificate number
EPS 22 ATEX 1055X, IECEx EPS 22.0014X, EPS 22 UKEX 1055X
Measuring Units
Name
XT50-M / XT50-S
Communication
BT wireless technology
Type of detector
1 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.5x50.9 mm [3.0x3.0x2.0"]
Weight
316 g [11.1 oz]
OLED display
128x64 pixels
Operating time
Up to 20 h continuously
Ex classification
II 2 G Ex ib op is IIC T4 Gb, -10°C ≤ Ta ≤ 50°C
II 2 D Ex ib op is IIIC T135°C Db, -10°C ≤ Ta ≤ 50°C
Ex certificate number
Presafe 17 ATEX 10552X, IECEx PRE 17.0049X
Contains :
1 Measuring unit XT50-M
1 Measuring unit XT50-S
2 Shaft brackets with chains and rods
4 Rods 60 mm [2.36"]
2 Rods 120 mm [4.72"]
2 Extension chains 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Rod tool
1 Charger (100–240 V AC)
1 DC split cable for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Ex/ATEX
Optional
1 Display unit ecom Tab-Ex
Also you can check product : NEW Easy-Laser XT660 Laser Shaft Alignment System
The Easy-Laser XT550 Shaft system is developed for hazardous areas and is easily operated through our XT Alignment app. It is an advanced measurement system for alignment of horizontal and vertical/flange mounted rotating machinery. The system comes with Easy-Laser’s dot laser technology, allowing you to measure large machinery and long spans.
USED Easy-Laser XT770 Laser Shaft Alignment System - Calibrated (XT770)
With Easy-Laser XT770 Shaft you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more.
2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position. We call it 360° Live adjustment.
With the XT770 you have a choice of several different shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.
Dynamic measurement
The EasyTrend program allows you to keep track of machine movement over time, during operation. This is useful when checking for thermal expansion and pipe strain issues for example. This type of measurement requires special DM brackets which can be ordered separately.
Bore alignment with XT770
The Bore center program is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job.
Use with any device
As all other XT systems, the XT770 can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit.
Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get the it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.
SYSTEM PARTS
Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT70-M / XT70-S
Communication
BT wireless technology
Type of detector
2 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Includes:
1 Measuring unit XT70-M IP66/67, 66ft measurement range, up to 24 hour operating time
1 Measuring unit XT70-S IP66/67, 66ft measurement range, up to 24 hour operating time
2 Shaft brackets with chains and rods 120 mm [4.72″]
2 12-1147 magnetic shaft brackets
4 Rods 60 mm [2.36″]
4 Rods 120 mm [4.72″]
2 Magnet bases
2 Offset brackets
2 Extension chain 900 mm [35.4″]
1 Measuring tape 3 m [9.8′]
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Documentation folder
1 Carrying case Large
Also you can check product : USED Leica ScanStation C5 Scalable Laser Scanner - Calibrated
2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position. We call it 360° Live adjustment.
With the XT770 you have a choice of several different shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.
Dynamic measurement
The EasyTrend program allows you to keep track of machine movement over time, during operation. This is useful when checking for thermal expansion and pipe strain issues for example. This type of measurement requires special DM brackets which can be ordered separately.
Bore alignment with XT770
The Bore center program is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job.
Use with any device
As all other XT systems, the XT770 can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit.
Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get the it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.
SYSTEM PARTS
Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT70-M / XT70-S
Communication
BT wireless technology
Type of detector
2 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Includes:
1 Measuring unit XT70-M IP66/67, 66ft measurement range, up to 24 hour operating time
1 Measuring unit XT70-S IP66/67, 66ft measurement range, up to 24 hour operating time
2 Shaft brackets with chains and rods 120 mm [4.72″]
2 12-1147 magnetic shaft brackets
4 Rods 60 mm [2.36″]
4 Rods 120 mm [4.72″]
2 Magnet bases
2 Offset brackets
2 Extension chain 900 mm [35.4″]
1 Measuring tape 3 m [9.8′]
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Documentation folder
1 Carrying case Large
Also you can check product : USED Leica ScanStation C5 Scalable Laser Scanner - Calibrated
The Easy-Laser XT770 is our flagship laser alignment system in the Generation XT series, offering exceptional power and versatility for precision shaft alignment. It provides the flexibility to display alignment data on a range of handheld devices, including our own Easy-Laser® XT ergonomic and rugged, IP66/67-approved shockproof alignment computer, which features a built-in 13MP camera for documentation and HDMI video output. With the Easy-Laser XT770, you can perform accurate laser shaft alignment for horizontal and vertically/flange mounted machines, as well as align unlimited machine trains, measure twist of foundation, soft foot, bearing clearance, and more. The EasyTrend program allows you to track machine movement over time, making it useful for checking thermal expansion (thermal growth) and pipe strain issues, among other things.
NEW Easy-Laser XT440 Laser Shaft Alignment System (XT440)
The perfect tool for basic laser shaft alignment
Easy-Laser® XT440 Shaft is a member of our Generation XT alignment systems, built upon our cross-platform technology. This means you will be able to display data on a multitude of different handheld devices, including our own XT12. With XT440 you can carry out the following:
Align the machine
Check soft foot
Document and share the results
With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process.
Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device*. Whatever you choose, the intuitive user interface is the same across all platforms.
The measuring units and XT display unit are shockproof and rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the toughest jobs.
Unique documentation possibilities
From the app, you can easily create and share a PDF report containing all measurement data and images. If you use the XT display unit it has a built-in 13MP camera. The XT display unit can also be equipped with an IR camera which allows you to add a thermal image of the machine before and after alignment.
Measuring units XT40-M / XT40-S
The XT40 measuring units have large 30 mm PSD [1.2”], and a state-of-the-art OLED display which shows the angle of the unit, making it easier to position it on the shaft. The line laser technology provides a fast setup and measurement process.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT40-M / XT40-S
Communication
BT wireless technology
Type of detector
TruePSD 30 mm [1.2”]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±5µm ±1%
Measurement range
Up to10 m [33 feet]
Type of laser
Diode laser
Laser wavelength
630–680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Internal battery
Heavy duty Li Ion chargeable
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x39.3 mm [3.0x3.0x1.5”]
Weight
245 g [8.6 oz]
OLED display
128x64 pixels
Operating time
>24 h continuously
Contains :
1 Measuring unit XT40-M
1 Measuring unit XT40-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95”]
1 Measuring tape 3 m [9.8’]
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : USED Easy-Laser XT440 Laser Shaft Alignment System - Calibrated
Easy-Laser® XT440 Shaft is a member of our Generation XT alignment systems, built upon our cross-platform technology. This means you will be able to display data on a multitude of different handheld devices, including our own XT12. With XT440 you can carry out the following:
Align the machine
Check soft foot
Document and share the results
With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process.
Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device*. Whatever you choose, the intuitive user interface is the same across all platforms.
The measuring units and XT display unit are shockproof and rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the toughest jobs.
Unique documentation possibilities
From the app, you can easily create and share a PDF report containing all measurement data and images. If you use the XT display unit it has a built-in 13MP camera. The XT display unit can also be equipped with an IR camera which allows you to add a thermal image of the machine before and after alignment.
Measuring units XT40-M / XT40-S
The XT40 measuring units have large 30 mm PSD [1.2”], and a state-of-the-art OLED display which shows the angle of the unit, making it easier to position it on the shaft. The line laser technology provides a fast setup and measurement process.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT40-M / XT40-S
Communication
BT wireless technology
Type of detector
TruePSD 30 mm [1.2”]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±5µm ±1%
Measurement range
Up to10 m [33 feet]
Type of laser
Diode laser
Laser wavelength
630–680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Internal battery
Heavy duty Li Ion chargeable
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x39.3 mm [3.0x3.0x1.5”]
Weight
245 g [8.6 oz]
OLED display
128x64 pixels
Operating time
>24 h continuously
Contains :
1 Measuring unit XT40-M
1 Measuring unit XT40-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95”]
1 Measuring tape 3 m [9.8’]
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : USED Easy-Laser XT440 Laser Shaft Alignment System - Calibrated
Easy-Laser XT440 Shaft is a member of our Generation XT alignment systems, built upon our cross-platform technology. This means you will be able to display data on a multitude of different handheld devices, including our own XT12. Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device. Whatever you choose, the intuitive user interface is the same across all platforms.
USED Easy-Laser XT660 Laser Shaft Alignment System - Calibrated (XT660)
Easy-Laser XT660 Shaft is an advanced measurement system for alignment of horizontal and vertical/flange mounted rotating machinery. With the XT660 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems.
Measuring units XT60-M / XT60-S
The XT60 measuring units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT60-M / XT60-S
Communication
BT wireless technology
Type of detector
1 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Contains :
1 Measuring unit XT60-M
1 Measuring unit XT60-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95"]
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium
Also you can check product : USED Easy-Laser XT770 Laser Shaft Alignment System - Calibrated
Measuring units XT60-M / XT60-S
The XT60 measuring units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
Slideable target
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT60-M / XT60-S
Communication
BT wireless technology
Type of detector
1 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously
Contains :
1 Measuring unit XT60-M
1 Measuring unit XT60-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95"]
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium
Also you can check product : USED Easy-Laser XT770 Laser Shaft Alignment System - Calibrated
Easy-Laser XT660 Shaft is an advanced measurement system for alignment of horizontal and vertical/flange mounted rotating machinery. With the XT660 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems.
USED Easy-Laser XT440 Laser Shaft Alignment System - Calibrated (XT440)
With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process.
Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device*. Whatever you choose, the intuitive user interface is the same across all platforms.
The measuring units and XT display unit are shockproof and rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the toughest jobs.
Unique documentation possibilities
From the app, you can easily create and share a PDF report containing all measurement data and images. If you use the XT display unit it has a built-in 13MP camera. The XT display unit can also be equipped with an IR camera which allows you to add a thermal image of the machine before and after alignment.
SYSTEM PARTS
Measuring units XT40-M / XT40-S
The XT40 measuring units have large 30 mm PSD [1.2”], and a state-of-the-art OLED display which shows the angle of the unit, making it easier to position it on the shaft. The line laser technology provides a fast setup and measurement process.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT40-M / XT40-S
Communication
BT wireless technology
Type of detector
TruePSD 30 mm [1.2”]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±5µm ±1%
Measurement range
Up to10 m [33 feet]
Type of laser
Diode laser
Laser wavelength
630–680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Internal battery
Heavy duty Li Ion chargeable
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x39.3 mm [3.0x3.0x1.5”]
Weight
245 g [8.6 oz]
OLED display
128x64 pixels
Operating time
>24 h continuously
Contains :
1 Measuring unit XT40-M
1 Measuring unit XT40-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95”]
1 Measuring tape 3 m [9.8’]
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : USED Easy-Laser XT660 Laser Shaft Alignment System - Calibrated
Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device*. Whatever you choose, the intuitive user interface is the same across all platforms.
The measuring units and XT display unit are shockproof and rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the toughest jobs.
Unique documentation possibilities
From the app, you can easily create and share a PDF report containing all measurement data and images. If you use the XT display unit it has a built-in 13MP camera. The XT display unit can also be equipped with an IR camera which allows you to add a thermal image of the machine before and after alignment.
SYSTEM PARTS
Measuring units XT40-M / XT40-S
The XT40 measuring units have large 30 mm PSD [1.2”], and a state-of-the-art OLED display which shows the angle of the unit, making it easier to position it on the shaft. The line laser technology provides a fast setup and measurement process.
Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit
24 hours operating time
Display unit XT12 (optional)
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.
SPECS :
Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT40-M / XT40-S
Communication
BT wireless technology
Type of detector
TruePSD 30 mm [1.2”]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±5µm ±1%
Measurement range
Up to10 m [33 feet]
Type of laser
Diode laser
Laser wavelength
630–680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Internal battery
Heavy duty Li Ion chargeable
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x39.3 mm [3.0x3.0x1.5”]
Weight
245 g [8.6 oz]
OLED display
128x64 pixels
Operating time
>24 h continuously
Contains :
1 Measuring unit XT40-M
1 Measuring unit XT40-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 75 mm [2.95”]
1 Measuring tape 3 m [9.8’]
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium
Optional:
XT12 Display unit, with or without IR camera
Also you can check product : USED Easy-Laser XT660 Laser Shaft Alignment System - Calibrated
Easy-Laser XT440 Shaft is a member of our Generation XT alignment systems, built upon our cross-platform technology. This means you will be able to display data on a multitude of different handheld devices, including our own XT12. With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process.
USED Easy-Laser E540 Shaft Alignment System - Calibrated (E540)
Easy-Laser E540 is a very powerful shaft alignment system, with the ideal balance between performance and price. Program that guides step-by-step with both icons and text makes the system very easy to use for everyone, regardless of prior knowledge.
The E540 system includes measurement programs for horizontal machines, vertical machines and alignment of machine trains with three machines.
The measuring units are pre-mounted for rapid machine set-up. Start with the measuring units positioned anywhere throug 360° around the shaft, then take any three readings down to 20° in-between. Theb adjust the machine with live-values in both horizontal and vertical directions. A PDF report is generated automatically when measurements are saved. Simple and efficient.
The shaft alignment system has a large 5,7", bright colour display that clearly shows all the steps of the measurement. The measuring units have a TruePSD-technology, which gives unlimited resolution. Twin lasr beams, twin PSDs and twin inclinometers give you superb control of the measurement in all situations. The measuring units are incredibly compact featuring Bluetooth wireless technology, a integrated rechargeable battery and large 30mm TruePSD detectors. This means that they are easy to install on most types of machines, even where there is limited space. The wireless technology gives you full freedom of movement around the machine that is to be aligned. Display unit, measuring units and fixtures are all very robust for the highest accurancy in demanding industrial environnements.
SPECS :
System
Relative humidity: 10–95%
Weight (complete system): 7.2 kg [15.9 lbs]
Carrying case WxHxD: 500x415x170 mm [19.7”x16.3”x6.7”]
Measuring units :ELM40 / ELS40
Type of detector: True PSD 30 mm [1.2”]
Wireless communication Class I Bluetooth wireless technology
Operating time: >4 h
Resolution: 0.001 mm [0.05 mils]
Measuring errors: ±1% 1 digit
Measurement range: Up to 10 m [33 feet]
Type of laser: Diode laser
Laser wavelength; 635–670 nm
Laser class: Safety class II
Laser output: <1 mw="" span="">
Electronic inclinometer: 0.1° resolution
Thermal sensors: -20–60 °C
Environmental protection: IP class 65
Temperature range: -10–50 °C
Housing material Anodized aluminium / ABS plastics
Dimensions WxHxD: 69.0x61.5x41.5 mm [2.72”x2.42”x1.63”]
Weight 172 g [6.0 oz]
Display unit E52
Type of display/size VGA 5.7” colour screen, backlit LED
Displayed resolution: 0.001 mm / 0.05 thou
Internal battery (fixed) Heavy duty Li Ion chargeable
Operating time Approx. 30 hours (at typical user cycle)
Temperature range: -10–50 °C
Connections USB A, USB B, Easy-Laser® units, Charger
Wireless communication Class I Bluetooth® wireless technology
Internal memory >100 000 measurements can be saved
Help functions Calculator, Unit converter
Environmental protection IP class 65
Housing material PC/ABS TPE
Dimensions WxHxD: 250x175x63 mm [9.8”x6.9”x2.5”]
Weight: 1020 g [2.3 lbs]
Cables
Charging cable (splitter cable) Length 1 m [39.4”]
USB cable Length 1.8 m [70.8”]
Brackets etc.
Shaft brackets Type: V-fixture for chain, width 18 mm [0.7”].
Shaft diameters: 20–450 mm [0.8”–17.7”]
Material: anodised aluminium
Rods Length: 120 mm, 60 mm [4.72”, 2.36”] (extendable)
Material: Stainless steel
EasyLink Data base software
System requirements: Windows XP, Vista, 7, 8. For the export functions, Excel
2003 or newer must be installed on the PC.
Contains :
1 Measuring unit M
1 Measuring unit S
1 Display unit
2 Shaft brackets with chains
2 Extension chains
4 Rods 120 mm [4.72”]
4 Rods 60 mm [2.36”]
1 Measuring tape 3 m [9.8’]
1 USB memory with EasyLink™ PC software
1 USB cable
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Shoulder strap for display unit
1 Quick reference manual
1 CD with documentation
1 Carrying case
Also you can check product : NEW Easy-Laser XT440 Laser Shaft Alignment System
The E540 system includes measurement programs for horizontal machines, vertical machines and alignment of machine trains with three machines.
The measuring units are pre-mounted for rapid machine set-up. Start with the measuring units positioned anywhere throug 360° around the shaft, then take any three readings down to 20° in-between. Theb adjust the machine with live-values in both horizontal and vertical directions. A PDF report is generated automatically when measurements are saved. Simple and efficient.
The shaft alignment system has a large 5,7", bright colour display that clearly shows all the steps of the measurement. The measuring units have a TruePSD-technology, which gives unlimited resolution. Twin lasr beams, twin PSDs and twin inclinometers give you superb control of the measurement in all situations. The measuring units are incredibly compact featuring Bluetooth wireless technology, a integrated rechargeable battery and large 30mm TruePSD detectors. This means that they are easy to install on most types of machines, even where there is limited space. The wireless technology gives you full freedom of movement around the machine that is to be aligned. Display unit, measuring units and fixtures are all very robust for the highest accurancy in demanding industrial environnements.
SPECS :
System
Relative humidity: 10–95%
Weight (complete system): 7.2 kg [15.9 lbs]
Carrying case WxHxD: 500x415x170 mm [19.7”x16.3”x6.7”]
Measuring units :ELM40 / ELS40
Type of detector: True PSD 30 mm [1.2”]
Wireless communication Class I Bluetooth wireless technology
Operating time: >4 h
Resolution: 0.001 mm [0.05 mils]
Measuring errors: ±1% 1 digit
Measurement range: Up to 10 m [33 feet]
Type of laser: Diode laser
Laser wavelength; 635–670 nm
Laser class: Safety class II
Laser output: <1 mw="" span="">
Electronic inclinometer: 0.1° resolution
Thermal sensors: -20–60 °C
Environmental protection: IP class 65
Temperature range: -10–50 °C
Housing material Anodized aluminium / ABS plastics
Dimensions WxHxD: 69.0x61.5x41.5 mm [2.72”x2.42”x1.63”]
Weight 172 g [6.0 oz]
Display unit E52
Type of display/size VGA 5.7” colour screen, backlit LED
Displayed resolution: 0.001 mm / 0.05 thou
Internal battery (fixed) Heavy duty Li Ion chargeable
Operating time Approx. 30 hours (at typical user cycle)
Temperature range: -10–50 °C
Connections USB A, USB B, Easy-Laser® units, Charger
Wireless communication Class I Bluetooth® wireless technology
Internal memory >100 000 measurements can be saved
Help functions Calculator, Unit converter
Environmental protection IP class 65
Housing material PC/ABS TPE
Dimensions WxHxD: 250x175x63 mm [9.8”x6.9”x2.5”]
Weight: 1020 g [2.3 lbs]
Cables
Charging cable (splitter cable) Length 1 m [39.4”]
USB cable Length 1.8 m [70.8”]
Brackets etc.
Shaft brackets Type: V-fixture for chain, width 18 mm [0.7”].
Shaft diameters: 20–450 mm [0.8”–17.7”]
Material: anodised aluminium
Rods Length: 120 mm, 60 mm [4.72”, 2.36”] (extendable)
Material: Stainless steel
EasyLink Data base software
System requirements: Windows XP, Vista, 7, 8. For the export functions, Excel
2003 or newer must be installed on the PC.
Contains :
1 Measuring unit M
1 Measuring unit S
1 Display unit
2 Shaft brackets with chains
2 Extension chains
4 Rods 120 mm [4.72”]
4 Rods 60 mm [2.36”]
1 Measuring tape 3 m [9.8’]
1 USB memory with EasyLink™ PC software
1 USB cable
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Shoulder strap for display unit
1 Quick reference manual
1 CD with documentation
1 Carrying case
Also you can check product : NEW Easy-Laser XT440 Laser Shaft Alignment System
Easy-Laser E540 is a very powerful shaft alignment system, with the ideal balance between performance and price. Program that guides step-by-step with both icons and text makes the system very easy to use for everyone, regardless of prior knowledge. The E540 system includes measurement programs for horizontal machines, vertical machines and alignment of machine trains with three machines.
USED Easy-Laser E420 Shaft Alignment System - Calibrated (E420)
The Easy-Laser E420 represents a leap forward in entry level laser systems for shaft alignment. The new E420 makes aligning various sizes of wind turbines gear boxes and generators a breeze -and with the new special brackets available for alignment with locked rotors, your alignment jobs are even more safe.
The rugged machine has an IP65-rated design built to work in the toughest environments. The E420 features pre-mounted units and an Easy-Laser® barcode scanner for fast operation. The large 5.7″ colour display makes it simple to gather all measurement data and the built in Bluetooth wireless technology means you won’t be tangled up with cords and wires getting in the way of your job.
The Easy-Laser® E420 is set up with a range of Smart Functions to make your measurement and alignment run faster and more smoothly.
EasyTurn – allows you to begin the measurement process from anywhere on the turn.
Soft Foot Check – ensures that the machine is positioned evenly on all feet and letting you know where adjustment is needed
Thermal Growth Compensation – calculates the appropriate shims and values required to make adjustments where temperature expansion has occurred
Tolerance Check – Measurement results can be checked against pre-defined tolerance tables or values you determine yourself
Vertical/Flange-Mounted Machines – This program is used for alignment of vertical and flange-mounted machines, and displays centre offset, angular error and shim value at each bolt
Horizontal Machines – Simple alignment of horizontally mounted machinery including pumps, motors, gearboxes and compressors
Values – Digital Dial Indicator – The values program can be used with the standard equipment when measuring with dial gauges and to check bearing play or shaft load
Measurement Value Filter – An electronic filter function used to filter out interference such as vibrations and air turbulence from adjacent machines that could otherwise result in poor measuring conditions
Multiple Sets Of Feet – adjusts the unit to measure just about any type of machine design
Live-Any-Angle 360° – lets you adjust machines in real time with the measuring units positioned anywhere on the shaft.
SPECS :
System
Relative humidity
10–95%
Weight (complete system)
6.3 kg [13.9 lbs]
Carrying case WxHxD
500x415x170 mm [19.7x16.3x6.7"]
Measuring units ELM20 / ELS20
Type of detector
TruePSD 20 mm [0.78"]
Communication
BT Wireless technology
Operating time
>4 h
Resolution
0.01 mm [0.5 mils]
Measurement accuracy
± 5 µm ± 1%
Measurement range
Up to 3 m [10 feet]
Type of laser
Diode laser
Laser wavelength
630–680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Thermal sensors
-20–60 °C
Environmental protection
IP class 65
Operating temperature
-10–50 °C
Housing material
Anodized aluminium / ABS plastics
Dimensions
WxHxD: 69.0x61.5x41.5 mm [2.72x2.42x1.63"]
Weight
176 g [6.2 oz]
Display unit
Type of display/size
VGA 5.7" colour screen, backlit LED
Displayed resolution
0.01 mm / 0.5 thou
Internal battery
(fixed) Heavy duty Li Ion chargeable
Operating time
Approx. 30 hours (at typical user cycle)
Operating temperature
-10–50 °C
Connections
USB A, Charger
Communication
BT Wireless technology
Internal memory
>2000 measurements can be saved
Help functions
Calculator, Unit converter
Environmental protection
IP class 65
Housing material
PC/ABS TPE
Dimensions
WxHxD: 250x175x63 mm [9.8x6.9x2.5"]
Weight
910 g [2.0 lbs]
Cable
Charging cable
(splitter cable) Length 1 m [39.4"]
Brackets etc.
Shaft brackets
Type: V-fixture for chain, width 18 mm [0.7"].
Shaft diameters: 20–450 mm [0.8"–17.7"]
Material: anodised aluminium
Rods
Length: 120 mm, 60 mm [4.72", 2.36"] (extendable)
Material: Stainless steel
EasyLink Data base software
System requirements
Windows® XP, Vista, 7, 8, 10. For the export functions,
Excel 2003 or newer must be installed on the PC.
Contains :
1 Measuring unit M
1 Measuring unit S
1 Display unit
2 Shaft brackets with chains
2 Extension chains
4 Rods 120 mm [4.72"]
4 Rods 60 mm [2.36"]
1 Measuring tape 3 m [9.8']
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 USB memory with manuals and EasyLink™ PC software
1 Carrying case
Also you can check product : USED Easy-Laser E540 Shaft Alignment System - Calibrated
The rugged machine has an IP65-rated design built to work in the toughest environments. The E420 features pre-mounted units and an Easy-Laser® barcode scanner for fast operation. The large 5.7″ colour display makes it simple to gather all measurement data and the built in Bluetooth wireless technology means you won’t be tangled up with cords and wires getting in the way of your job.
The Easy-Laser® E420 is set up with a range of Smart Functions to make your measurement and alignment run faster and more smoothly.
EasyTurn – allows you to begin the measurement process from anywhere on the turn.
Soft Foot Check – ensures that the machine is positioned evenly on all feet and letting you know where adjustment is needed
Thermal Growth Compensation – calculates the appropriate shims and values required to make adjustments where temperature expansion has occurred
Tolerance Check – Measurement results can be checked against pre-defined tolerance tables or values you determine yourself
Vertical/Flange-Mounted Machines – This program is used for alignment of vertical and flange-mounted machines, and displays centre offset, angular error and shim value at each bolt
Horizontal Machines – Simple alignment of horizontally mounted machinery including pumps, motors, gearboxes and compressors
Values – Digital Dial Indicator – The values program can be used with the standard equipment when measuring with dial gauges and to check bearing play or shaft load
Measurement Value Filter – An electronic filter function used to filter out interference such as vibrations and air turbulence from adjacent machines that could otherwise result in poor measuring conditions
Multiple Sets Of Feet – adjusts the unit to measure just about any type of machine design
Live-Any-Angle 360° – lets you adjust machines in real time with the measuring units positioned anywhere on the shaft.
SPECS :
System
Relative humidity
10–95%
Weight (complete system)
6.3 kg [13.9 lbs]
Carrying case WxHxD
500x415x170 mm [19.7x16.3x6.7"]
Measuring units ELM20 / ELS20
Type of detector
TruePSD 20 mm [0.78"]
Communication
BT Wireless technology
Operating time
>4 h
Resolution
0.01 mm [0.5 mils]
Measurement accuracy
± 5 µm ± 1%
Measurement range
Up to 3 m [10 feet]
Type of laser
Diode laser
Laser wavelength
630–680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Thermal sensors
-20–60 °C
Environmental protection
IP class 65
Operating temperature
-10–50 °C
Housing material
Anodized aluminium / ABS plastics
Dimensions
WxHxD: 69.0x61.5x41.5 mm [2.72x2.42x1.63"]
Weight
176 g [6.2 oz]
Display unit
Type of display/size
VGA 5.7" colour screen, backlit LED
Displayed resolution
0.01 mm / 0.5 thou
Internal battery
(fixed) Heavy duty Li Ion chargeable
Operating time
Approx. 30 hours (at typical user cycle)
Operating temperature
-10–50 °C
Connections
USB A, Charger
Communication
BT Wireless technology
Internal memory
>2000 measurements can be saved
Help functions
Calculator, Unit converter
Environmental protection
IP class 65
Housing material
PC/ABS TPE
Dimensions
WxHxD: 250x175x63 mm [9.8x6.9x2.5"]
Weight
910 g [2.0 lbs]
Cable
Charging cable
(splitter cable) Length 1 m [39.4"]
Brackets etc.
Shaft brackets
Type: V-fixture for chain, width 18 mm [0.7"].
Shaft diameters: 20–450 mm [0.8"–17.7"]
Material: anodised aluminium
Rods
Length: 120 mm, 60 mm [4.72", 2.36"] (extendable)
Material: Stainless steel
EasyLink Data base software
System requirements
Windows® XP, Vista, 7, 8, 10. For the export functions,
Excel 2003 or newer must be installed on the PC.
Contains :
1 Measuring unit M
1 Measuring unit S
1 Display unit
2 Shaft brackets with chains
2 Extension chains
4 Rods 120 mm [4.72"]
4 Rods 60 mm [2.36"]
1 Measuring tape 3 m [9.8']
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 USB memory with manuals and EasyLink™ PC software
1 Carrying case
Also you can check product : USED Easy-Laser E540 Shaft Alignment System - Calibrated
The Easy-Laser® E420 represents a leap forward in entry level laser systems for shaft alignment and can be used in the toughest environments. The Easy-Laser® E420 represents a leap forward in entry level laser systems for shaft alignment. The new E420 makes aligning various sizes of wind turbines gear boxes and generators a breeze -and with the new special brackets available for alignment with locked rotors, your alignment jobs are even more safe.
- 1