NEW Adash A4500 - VA5 Pro Vibration Analyzer - Thermal Imaging and Ultrasound Measurement
Explore the most powerful Vibration Analyzer on the market – the A4500 VA5 Pro is the newest member in the Adash product range; comes with touchscreen and large display – complete with the Data Collector, Run-up Analyser, Balancer, Recorder, Stethoscope, FASIT, Lubri, Bump Test, Octave Analyser, Ultrasound, Camera, Pictures Gallery and Thermal Imaging modules. This 24-bit 120 dB instrument can be set to measure up to frequency span of 90 kHz and with 3,276,800 lines resolution. It can record up to 20 hours at 64kHz sample rate make it ideal for post analysis of any machinery fault.
£4,180.69
Adash A4500 - VA5 Pro
Vibration Analyser for Professionals
Explore the most powerful Vibration Analyzer on the market – the A4500 VA5 Pro is the newest member in the Adash product range; comes with touchscreen and large display – complete with the Data Collector, Run-up Analyser, Balancer, Recorder, Stethoscope, FASIT, Lubri, Bump Test, Octave Analyser, Ultrasound, Camera, Pictures Gallery and Thermal Imaging modules.
This 24-bit 120 dB instrument can be set to measure up to frequency span of 90 kHz and with 3,276,800 lines resolution. It can record up to 20 hours at 64kHz sample rate make it ideal for post analysis of any machinery fault.
The instrument is equipped with an expert system that automatically detects machinery defects and the ACMT – low speed bearing analysis; both developed by Adash.
The instrument can perform simultaneous data acquisition with 4 channels AC (vibration), 4 channels DC (process values) and tachometer using the optional BNC breakout box.
Use multitasking tool in order to analyse your machinery. Analyse your data on site and enjoy the big screen size for playing with variable cursors, bearing fault frequencies indication and FFTs in cascade. Touchscreen and keyboard is at your service whenever you need it.
Data Acquisition Time
The VA4 Pro analyser with built-in high speed chips approach the job with much more advanced concept. For every individual Parameter created in the instrument memory; the internal virtual analyser will set the instrument to store the single input signal into DSP board and perform required data acquisition internally; it means that the total required time is not equal the sum of all individual times, but it is equal the time required for the single longest parameter – base on previous example – it will be only 8 seconds.
That means – with the triaxial sensors, the VA4 Pro can collect all the parameters in 3 axes for only 8 seconds against the 96 seconds required of a single channel analyser to measure in 3 axes!
This 12 times* in time saving means that there is no time lag and phase angle between the first and last measured parameter as they are using the same input signal, this also especially important to provide simultaneous results in 3 axes during trouble-shooting mode.
Note:
12 times in time saving when compared against conventional instrument using single sensor, 4 times in time saving when compared against conventional instrument using a triaxial sensor
The larger number of parameter utilised in the instrument, the higher is the percentage in time saving.
Specification :
Input channels:
4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACHO for speed probe/external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
Frequency ranges (-3 dB):
Maximum range: 0.35 Hz - 90 kHz (1 Ch, 194 kHz sampling)
Maximum range: 0.35 Hz - 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 0.35 Hz - 25 Hz (4 Ch, 64 Hz sampling)
Sampling mode:
Fully simultaneous for 4 channels
FFT resolution:
Min. 100 lines
Max. 3 276 800 lines
Unit modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Run up - run up and coast down measurements
Recorder - raw signal recording for later post analysis
Stethoscope - listening of the bearing/machine noise
FASIT - expert system for automatic fault detection
MCSA
Octave analyzer - hearable sound measurements
Bump test - measurement of natural frequencies
ADS - Animated Deflection Shapes (Operating deflection shapes)
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
Camera
IR Camera
Gallery
Display:
1125 x 800 pixels
Built-in camera:
5 MPx, autofocus
Thermal imaging camera (optionally):
384 x 288 pixels
-10°C ~ 150°C (or up to 250°C) temp. range
50 mK NETD sensitivity
Processor:
Intel Atom 1.9 GHz
Memory, Route:
64 GB, max. 16 GB for one route, number of routes is limited by free memory only
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Raw signal recorder:
64 kHz sampling frequency
4 Ch memory consumption 3 GB/hour
4 Ch total recording - 20 hours
Trigger:
Manual, External, Signal level, Time
Speed change, Time interval
Interface:
USB 3.0, 2.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery (up to 8 hours of operation)
Case:
IP 65 rating, aluminium heavy duty
Size & Weight:
29,5 x 23 x 4,9 cm, 1,98 kg
Languages:
English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish, Romanian, Thai
Includes :
VA5 Vibration Analyzer
Single License of DDS Digital Diagnostics Software 2023
Charger
Leather holster
Carrying strap and hard shell Profi Case
1x standard sensor
1x 6ft. coiled cable
Flat rare earth magnet
Also you can check product : NEW Adash A4400 VA4 Pro II The Fastest 4-Channel Vibration Analyzer
Vibration Analyser for Professionals
Explore the most powerful Vibration Analyzer on the market – the A4500 VA5 Pro is the newest member in the Adash product range; comes with touchscreen and large display – complete with the Data Collector, Run-up Analyser, Balancer, Recorder, Stethoscope, FASIT, Lubri, Bump Test, Octave Analyser, Ultrasound, Camera, Pictures Gallery and Thermal Imaging modules.
This 24-bit 120 dB instrument can be set to measure up to frequency span of 90 kHz and with 3,276,800 lines resolution. It can record up to 20 hours at 64kHz sample rate make it ideal for post analysis of any machinery fault.
The instrument is equipped with an expert system that automatically detects machinery defects and the ACMT – low speed bearing analysis; both developed by Adash.
The instrument can perform simultaneous data acquisition with 4 channels AC (vibration), 4 channels DC (process values) and tachometer using the optional BNC breakout box.
Use multitasking tool in order to analyse your machinery. Analyse your data on site and enjoy the big screen size for playing with variable cursors, bearing fault frequencies indication and FFTs in cascade. Touchscreen and keyboard is at your service whenever you need it.
Data Acquisition Time
The VA4 Pro analyser with built-in high speed chips approach the job with much more advanced concept. For every individual Parameter created in the instrument memory; the internal virtual analyser will set the instrument to store the single input signal into DSP board and perform required data acquisition internally; it means that the total required time is not equal the sum of all individual times, but it is equal the time required for the single longest parameter – base on previous example – it will be only 8 seconds.
That means – with the triaxial sensors, the VA4 Pro can collect all the parameters in 3 axes for only 8 seconds against the 96 seconds required of a single channel analyser to measure in 3 axes!
This 12 times* in time saving means that there is no time lag and phase angle between the first and last measured parameter as they are using the same input signal, this also especially important to provide simultaneous results in 3 axes during trouble-shooting mode.
Note:
12 times in time saving when compared against conventional instrument using single sensor, 4 times in time saving when compared against conventional instrument using a triaxial sensor
The larger number of parameter utilised in the instrument, the higher is the percentage in time saving.
Specification :
Input channels:
4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACHO for speed probe/external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
Frequency ranges (-3 dB):
Maximum range: 0.35 Hz - 90 kHz (1 Ch, 194 kHz sampling)
Maximum range: 0.35 Hz - 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 0.35 Hz - 25 Hz (4 Ch, 64 Hz sampling)
Sampling mode:
Fully simultaneous for 4 channels
FFT resolution:
Min. 100 lines
Max. 3 276 800 lines
Unit modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Run up - run up and coast down measurements
Recorder - raw signal recording for later post analysis
Stethoscope - listening of the bearing/machine noise
FASIT - expert system for automatic fault detection
MCSA
Octave analyzer - hearable sound measurements
Bump test - measurement of natural frequencies
ADS - Animated Deflection Shapes (Operating deflection shapes)
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
Camera
IR Camera
Gallery
Display:
1125 x 800 pixels
Built-in camera:
5 MPx, autofocus
Thermal imaging camera (optionally):
384 x 288 pixels
-10°C ~ 150°C (or up to 250°C) temp. range
50 mK NETD sensitivity
Processor:
Intel Atom 1.9 GHz
Memory, Route:
64 GB, max. 16 GB for one route, number of routes is limited by free memory only
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Raw signal recorder:
64 kHz sampling frequency
4 Ch memory consumption 3 GB/hour
4 Ch total recording - 20 hours
Trigger:
Manual, External, Signal level, Time
Speed change, Time interval
Interface:
USB 3.0, 2.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery (up to 8 hours of operation)
Case:
IP 65 rating, aluminium heavy duty
Size & Weight:
29,5 x 23 x 4,9 cm, 1,98 kg
Languages:
English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish, Romanian, Thai
Includes :
VA5 Vibration Analyzer
Single License of DDS Digital Diagnostics Software 2023
Charger
Leather holster
Carrying strap and hard shell Profi Case
1x standard sensor
1x 6ft. coiled cable
Flat rare earth magnet
Also you can check product : NEW Adash A4400 VA4 Pro II The Fastest 4-Channel Vibration Analyzer
- Availability: 17 In Stock
- Model: A4500 - VA5 Pro
-
Brand:
