NEW Benstone vPod Pro Smart Vibration data collectors and Analyzers
vPod Pro is our next generation smart vibration meter built around your need in machinery condition monitoring. With the innovatively designed sensor A52-IR, vPod Pro can measure vibration and temperature at the same time. The high-strength magnetic base secures the sensor for accurate transmission of high frequency signals from bearings or gears. After each measurement, vPod Pro displays 3 readings at the same time: vibration level, bearing condition and temperature. The severity status for each measurement is shown with easy to read background colors.
3,031.36€
The vPod Pro Smart Vibration Meter is designed for machine health monitoring and predictive maintenance.
- IP65-rated case with anti-drop rubber sleeve
- 3.5" color screen
- Built-in 24G flash memory
- Route-based vibration data collector measures bearing condition and temperature at the same time
- Optional spectrum analysis function
- Buit-in camera for taking on-site photos as a note when storing data
- Supports Bluetooth headset connection for listening to the vibration signal
- USB 2.0 and Wi-Fi transmission interface
Innovatively designed (patent) dual-output sensor A52-IR
- Measure vibration signals in the frequency range of 1~8kHz ( /-1dB) or 0.3~10kHz( /-3dB)
- High-strength magnetic base to secure the transmission of high-frequency signals
- Infrared temperature sensor inside
Overall vibration measurement
Detect low-frequency vibration of rotating equipment, such as
- Dynamic balance problems with the rotating parts
- Shaft misalignment
- Looseness
The vPod Pro Smart Vibration Meter's built-in ISO 10816-3 vibration standard displays vibration severity in green, yellow, and red.
Bearing Condition Monitoring
- Measures the bearing signal in the 1 kHz to 10 kHz bandwidth
- Implements the "true peak" value for detecting bearing damage
- Detects and tracks the bearing condition for early damage detection and predictive maintenance
- Detects bearing condition effectively on ultra-low speed machines
- Shows bearing condtions in green, yellow, and red background
Bluetooth headset connection
- The vPod Pro Smart Vibration Meter has a built-in feature that connects to Bluetooth headsets
- After each measurement, the user can automatically play 2~8 seconds of vibration signal through the Bluetooth headset
- Experienced users can use this auxiliary function to tell whether an equipment is abnormal or not
Camera function
- The vPod Pro Smart Vibration Meter has a built-in camera
- Can be attached to a live shot as a record while storing measurement data
- Photo linked to the measurement data and sent back to the PC-based iSee Predictive Maintenance Software
Spectrum analysis function (optional)
- Spectrum data is measured at the same time as a diagnostic vibration problem
- Select 1 kHz bandwidth of 1600 resolution lines or 10 kHz bandwidth of 6400 resolution lines
- Display the order information of the top 10 peaks
Route-based Vibration Data Collector Module (optional)
- Works with iSee Predictive Maintenance Software
- Measures basic vibration, bearing condition, temperature, and raw vibration signal
- Converts raw signal into a time waveform, two sets of spectrum analysis, envelope spectrum, and cepstrum
- Quickly track problematic measurement points, trend changes, diagnose problems and generate reports.
Innovative design
vPod Pro is our next generation smart vibration meter built around your need in machinery condition monitoring. With the innovatively designed sensor A52-IR, vPod Pro can measure vibration and temperature at the same time. The high-strength magnetic base secures the sensor for accurate transmission of high frequency signals from bearings or gears. After each measurement, vPod Pro displays 3 readings at the same time: vibration level, bearing condition and temperature. The severity status for each measurement is shown with easy to read background colors.
Superior method for detecting damaged bearings
A damaged bearing will exhibit the periodic knocking signals in its vibration time waveform. vPod Pro implements the field-proven “true-peak” detection, which can track early stage bearing damage. This detection method also proves to be very effective for detect bearing damage on ultra-low speed machine.
Powerful Utility and Novian sftware for data viewing and post analysis
vPod Pro allows you to listen to the raw signal via a Bluetooth headset, take and attach a picture to the stored data record. With optional Spectrum version, vPod Pro can store the 10 kHz bandwidth raw signal to the built-in memory and let you replay the sound files as many times as you wish. The users can also conduct post analysis on the stored raw data with free Utility and Novian software to derive more detailed spectrum data.
Complete features in route mode
In the Route mode; basic vibration, bearing condition and temperature are measured, while in the background the raw vibration signal is stored for further data analysis. When the measured data is imported into iSee computer program, this raw signal is automatically converted into a time waveform, two sets of power spectrum, envelope spectrum, and cepstrum to provide the most complete predictive maintenance monitoring parameters.
Specifications
vPod Pro analyzer/data collector
Processor
ARM® Cortex-A8, 1GHz
Display
3.5” color TFT LCD, 240x320
Storage
24G ash memory
Input Channels
1 analog & 1 digital input
Input Connector
8 pin Lemo connector
Input Range
±5V
Input coupling
IEPE, 2mA/ 19V ±1V
A/D Resolution
24 bits
Max. Sampling Rate
25.6 kHz
Input Impedance
1MΩ
Maximum frequency
10kHz
Analog high pass Filter
-10% at 3Hz, -5% at 5Hz
Max. Input voltage
±20V
Power supply
18650 battery x2
Battery life
6 hours continuous operation
Operating temperature
-10°~60°C
USB
USB 2.0 Client, Type-C connector
Bluetooth
Bluetooth 4.1 For headset
Wifi
802.11 b/g/n 2.4GHz
camera
640x480 pixels
housing
ABS Plastic and rubber sleeve
Certi cation
IP65, CE Mark, Rohs
Size
204x85x45 mm (8x3.3x1.8 inch)
Weight
0.49 kg (1.05 lb) (with batteries)
Spectrum measurements
Band & resolution
1kHz (1600 lines) or 10kHz (6400 lines)
Window
Hanning window
Cursor
single cursor with auto marking 10 peaks
A52-IR dual output sensor
Vibration sensor
IEPE type accelerometer
Measurement Range
±50 (g)
Sensitivity
100 (mV/g) typical
Frequency Response
1-8 kHz (±1dB), 0.3-10 kHz (±3dB)
Resonance Frequency
34 kHz
Non-Linearity
±1%
Transverse Sensitivity
5%
Shock Limit
5000g
Residual Noise
0.0004 (g RMS)
Temperature sensor
Digital Infrared thermometer
Resolution
0.1°C
Measurement Range
-40°~115°C
Meter Mode
Overall vibration
0-50g (peak)
Units
um,mm,mil;mm/s,in/s; g,mg,m/s2
Filters
3Hz-1kHz, 5Hz-1kHz, 10Hz-1kHz,10Hz-10kHz
Detections
rms, peak, peak-peak (equivalent)
Bearing condition
0~50g (true peak), 1kHz~10kHz
Temperature
-40°~115°C
Route Mode
Number of routes
unlimited
Hierarchic levels
2, machine and point
Archive data
overall vibration,bearing condition, temperature, Spectrum (1kHz/1600 lines), raw data (2 seconds)
Also you can check product : NEW Benstone VP5 Vibration data collector and handheld vibration analyzer
- IP65-rated case with anti-drop rubber sleeve
- 3.5" color screen
- Built-in 24G flash memory
- Route-based vibration data collector measures bearing condition and temperature at the same time
- Optional spectrum analysis function
- Buit-in camera for taking on-site photos as a note when storing data
- Supports Bluetooth headset connection for listening to the vibration signal
- USB 2.0 and Wi-Fi transmission interface
Innovatively designed (patent) dual-output sensor A52-IR
- Measure vibration signals in the frequency range of 1~8kHz ( /-1dB) or 0.3~10kHz( /-3dB)
- High-strength magnetic base to secure the transmission of high-frequency signals
- Infrared temperature sensor inside
Overall vibration measurement
Detect low-frequency vibration of rotating equipment, such as
- Dynamic balance problems with the rotating parts
- Shaft misalignment
- Looseness
The vPod Pro Smart Vibration Meter's built-in ISO 10816-3 vibration standard displays vibration severity in green, yellow, and red.
Bearing Condition Monitoring
- Measures the bearing signal in the 1 kHz to 10 kHz bandwidth
- Implements the "true peak" value for detecting bearing damage
- Detects and tracks the bearing condition for early damage detection and predictive maintenance
- Detects bearing condition effectively on ultra-low speed machines
- Shows bearing condtions in green, yellow, and red background
Bluetooth headset connection
- The vPod Pro Smart Vibration Meter has a built-in feature that connects to Bluetooth headsets
- After each measurement, the user can automatically play 2~8 seconds of vibration signal through the Bluetooth headset
- Experienced users can use this auxiliary function to tell whether an equipment is abnormal or not
Camera function
- The vPod Pro Smart Vibration Meter has a built-in camera
- Can be attached to a live shot as a record while storing measurement data
- Photo linked to the measurement data and sent back to the PC-based iSee Predictive Maintenance Software
Spectrum analysis function (optional)
- Spectrum data is measured at the same time as a diagnostic vibration problem
- Select 1 kHz bandwidth of 1600 resolution lines or 10 kHz bandwidth of 6400 resolution lines
- Display the order information of the top 10 peaks
Route-based Vibration Data Collector Module (optional)
- Works with iSee Predictive Maintenance Software
- Measures basic vibration, bearing condition, temperature, and raw vibration signal
- Converts raw signal into a time waveform, two sets of spectrum analysis, envelope spectrum, and cepstrum
- Quickly track problematic measurement points, trend changes, diagnose problems and generate reports.
Innovative design
vPod Pro is our next generation smart vibration meter built around your need in machinery condition monitoring. With the innovatively designed sensor A52-IR, vPod Pro can measure vibration and temperature at the same time. The high-strength magnetic base secures the sensor for accurate transmission of high frequency signals from bearings or gears. After each measurement, vPod Pro displays 3 readings at the same time: vibration level, bearing condition and temperature. The severity status for each measurement is shown with easy to read background colors.
Superior method for detecting damaged bearings
A damaged bearing will exhibit the periodic knocking signals in its vibration time waveform. vPod Pro implements the field-proven “true-peak” detection, which can track early stage bearing damage. This detection method also proves to be very effective for detect bearing damage on ultra-low speed machine.
Powerful Utility and Novian sftware for data viewing and post analysis
vPod Pro allows you to listen to the raw signal via a Bluetooth headset, take and attach a picture to the stored data record. With optional Spectrum version, vPod Pro can store the 10 kHz bandwidth raw signal to the built-in memory and let you replay the sound files as many times as you wish. The users can also conduct post analysis on the stored raw data with free Utility and Novian software to derive more detailed spectrum data.
Complete features in route mode
In the Route mode; basic vibration, bearing condition and temperature are measured, while in the background the raw vibration signal is stored for further data analysis. When the measured data is imported into iSee computer program, this raw signal is automatically converted into a time waveform, two sets of power spectrum, envelope spectrum, and cepstrum to provide the most complete predictive maintenance monitoring parameters.
Specifications
vPod Pro analyzer/data collector
Processor
ARM® Cortex-A8, 1GHz
Display
3.5” color TFT LCD, 240x320
Storage
24G ash memory
Input Channels
1 analog & 1 digital input
Input Connector
8 pin Lemo connector
Input Range
±5V
Input coupling
IEPE, 2mA/ 19V ±1V
A/D Resolution
24 bits
Max. Sampling Rate
25.6 kHz
Input Impedance
1MΩ
Maximum frequency
10kHz
Analog high pass Filter
-10% at 3Hz, -5% at 5Hz
Max. Input voltage
±20V
Power supply
18650 battery x2
Battery life
6 hours continuous operation
Operating temperature
-10°~60°C
USB
USB 2.0 Client, Type-C connector
Bluetooth
Bluetooth 4.1 For headset
Wifi
802.11 b/g/n 2.4GHz
camera
640x480 pixels
housing
ABS Plastic and rubber sleeve
Certi cation
IP65, CE Mark, Rohs
Size
204x85x45 mm (8x3.3x1.8 inch)
Weight
0.49 kg (1.05 lb) (with batteries)
Spectrum measurements
Band & resolution
1kHz (1600 lines) or 10kHz (6400 lines)
Window
Hanning window
Cursor
single cursor with auto marking 10 peaks
A52-IR dual output sensor
Vibration sensor
IEPE type accelerometer
Measurement Range
±50 (g)
Sensitivity
100 (mV/g) typical
Frequency Response
1-8 kHz (±1dB), 0.3-10 kHz (±3dB)
Resonance Frequency
34 kHz
Non-Linearity
±1%
Transverse Sensitivity
5%
Shock Limit
5000g
Residual Noise
0.0004 (g RMS)
Temperature sensor
Digital Infrared thermometer
Resolution
0.1°C
Measurement Range
-40°~115°C
Meter Mode
Overall vibration
0-50g (peak)
Units
um,mm,mil;mm/s,in/s; g,mg,m/s2
Filters
3Hz-1kHz, 5Hz-1kHz, 10Hz-1kHz,10Hz-10kHz
Detections
rms, peak, peak-peak (equivalent)
Bearing condition
0~50g (true peak), 1kHz~10kHz
Temperature
-40°~115°C
Route Mode
Number of routes
unlimited
Hierarchic levels
2, machine and point
Archive data
overall vibration,bearing condition, temperature, Spectrum (1kHz/1600 lines), raw data (2 seconds)
Also you can check product : NEW Benstone VP5 Vibration data collector and handheld vibration analyzer
- Availability: 17 In Stock
- Model: Benstone vPod Pro
-
Brand:
