NEW EXFO FTB-4 Pro Test Platform With FTBx-88200NGE-ROADM-OSA-OTDR

The FTB-4 Pro delivers all the power of a high-end platform in a go-where-you-need field-testing tool. Combines SONET/SDH, OTN, Ethernet and Fibre Channel analysis, as well as an optical spectrum analyzer (OSA) with built-in polarization controller. OTDR/iOLM testing combined with fiber endface inspection and optical power measurement for fiber characterization and troubleshooting of any network, including access, LAN/WAN, data center, FTTx, metro,long-haul and ultra-long-haul.

APPLICATIONS

ROADM and PTN turn-up testing
Combines SONET/SDH, OTN, Ethernet and Fibre Channel analysis, as well as an optical spectrum analyzer (OSA) with built-in polarization controller.

Gigabit/10 Gigabit Ethernet configurations
Gigabit Ethernet analyzer, OTDR and optical spectrum analyzer with polarization controller.

Fibre Channel
Fibre Channel is the protocol for the communication structure dedicated to carrying different types of traffic for applications that require first rate capabilities of storage and technologies.

ROADM commissioning
Insert an OSA within this compact, portable solution for fast and accurate DWDM commissioning and turn up of high-speed networks up to 100/200/400 Gbit/s.

Multiservice testing
Easily turn up, validate and troubleshoot DSn/PDH, SONET/SDH and Ethernet services up to 10 Gbit/s in converged optical networks. Delivering IPTV test capabilities and transmission control protocol (TCP) throughput assessment.

Fiber characterization and troubleshooting
OTDR/iOLM testing combined with fiber endface inspection and optical power measurement for fiber characterization and troubleshooting of any network, including access, LAN/WAN, data center, FTTx, metro, long-haul and ultra-long-haul.

FTTH testing
With a dynamic range of up to 42 dB and enabling power meter and visual fault locator functionalities, the PON FTTx/MDU OTDR module allows fiber installers to seamlessly characterize splitters in PON FTTx and multiple dwelling unit (MDU) applications.

Ethernet testing from 10 Mbit/s to 100 Gbit/s
100% line-rate testing of IP traffic at up to 100G; RFC 2544 and ITU-T Y.1564 Ethernet service activation with full statistics, and packet capture, traffic filtering, ping and traceroute with clear pass/fail verdicts. CWDM turn-up testing Integrate CWDM OTDR to test through CWDM-based MUX/DEMUX at
ITU-recommended wavelengths.

DWDM testing
Highly accurate and reliable DWDM network commissioning, troubleshooting and channel analysis. 

400 Gbit/s testing applications
Advanced future-proof hardware, ready for today’s and tomorrow’s 400 Gbit/s applications.

Distributed PMD analysis
Single-ended, span-by-span measurement of PMD, enabling targeted fiber upgrades and cost-effective deployment of transmission speeds at 10, 40 and 100 Gbit/s.

OPTICAL TEST MODULES
Optical spectrum analyzer
FTBx-5235
FTBx-5243-HWA
FTBx-5245
FTBx-5255

OTDR
FTB-7400E
FTB-7600E
FTBx-720C
FTBx-730C
FTBx-735C
FTBx-750C

OTDR CWDM/DWDM 
FTB-7400E
FTBx-740C

OLTS
FTBx-940
FTBx-945

Single-ended dispersion analyzer
FTB-5700

Chromatic dispersion (CD)
FTB-5800

Polarization mode dispersion (PMD)
FTB-5500B

Distributed PMD analyzer
FTB-5600

TRANSPORT AND DATACOM TEST MODULES

400G multiservice
FTBx-88460

1G-to-100G testing
FTBx-88260

Advanced 100G multiservice
FTBx-88200NGE

Versatile 10G multiservice
FTBx-8870
FTBx-8880

OPTICAL PLUG-AND-PLAY OPTIONS
The platform can host optical plug-and-play options that can be purchased whenever you need them, at the time of your order or later on. In either case, installation is a snap. You can do it by yourself. No software update required.

Optical power meter
A high-level power meter (GeX) that can measure up to 27 dBm, the highest in the industry. This is essential for HFC networks or
high-power signals. If used with an auto-lambda/auto-switching compatible light source, the power meter automatically syncs on
the same wavelength, avoiding any risk of mismatched measurement.
- Extensive range of connectors
- Auto-lambda and Auto-switching
- Offers measurement storage and reporting
- Choice of seven standard or CWDM calibrated wavelengths

Visual fault locator (VFL)
The plug-and-play VFL easily identifies breaks, bends, faulty connectors and splices, in addition to other causes of signal loss.
Basic yet essential, this troubleshooting device should be part of every field technician’s toolbox. Visually locating faults by creating
a bright-red glow at the exact location of the fault on singlemode or multimode fibers, the VFL detects faults over distances of up to 5 km.

TECHNICAL SPECIFICATIONS :

Mainframe
Quad-core processor / 4 GB RAM / Windows 10

Display
Touchscreen, color, 1280 × 800 TFT 256 mm (10.1 in)

Interfaces
RJ45 LAN 10/100/1000 Mbit/s
USB 2.0 ports (2)
USB 3.0 port (1)
Display port
3.5 mm headset/microphone port

Storage (internal flash memory)
128 GB

Battery (included)
Two rechargeable Li-ion smart batteries (optional)

Power supply
AC input: 100 – 240 V; 50/60 Hz; 5.2 – 1.9 A

GENERAL SPECIFICATIONS

Size (H x W x D)
199 mm × 333 mm × 170 mm (7 13/16 in × 13 1/8 in × 6 11/16 in)

Weight
4.6 kg (10 lb)

Temperature Operating Storage
0 °C to 40 °C (32 °F to 104 °F)
–40 °C to 60 °C (–40 °F to 140 °F)

BUILT-IN POWER METER SPECIFICATIONS (GeX) (optional)

Calibrated wavelengths (nm)
850, 1300, 1310, 1490, 1550, 1625, 1650

Optional CWDM calibrated wavelengths (nm)
1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490,
1510, 1530, 1550, 1570, 1590, 1610, 1383, 1625

Power range (dBm)
27 to –50

Uncertainty (%)
f ±5 % ± 10 nW

Display resolution (dB)
0.01 = max to —40 dBm
0.1 = —40 dBm to —50 dBm

VISUAL FAULT LOCATOR (VFL) (optional)

Laser650 nm ± 10 nm
CW/Modulate 1 Hz
Typical Pout in 62.5/125 µm: > –1.5 dBm (0.7 mW)
Laser safety: Class 2

Also you can check product : USED EXFO FTB-1 Pro High Power Dual-Carrier Platform With FTBx-88801 (800G module)

• Availability: 14 In Stock
• Model: FTB-4 Pro
• Brand: