NEW MMF VM100B Vibration Analyzer with 3 channels
Universal vibration analyzer with simple operation via touch screen, Frequency analysis and overall value measurements with long-term plot (scope of delivery), Route-based measurements on machines, Rolling bearing diagnosis, Balancing in one or two planes, Hand-arm and whole-body vibration measurement; ride comfort evaluation, Run-up and coast-down analysis; resonance finding, Vibration measurements on very sensitive equipment (VC/Nano).
$2,580.00
MMF VM100B Vibration Analyzer with 3 channels
Universal vibration analyzer with simple operation via touch screen, Frequency analysis and overall value measurements with long-term plot (scope of delivery), Route-based measurements on machines, Rolling bearing diagnosis, Balancing in one or two planes, Hand-arm and whole-body vibration measurement; ride comfort evaluation, Run-up and coast-down analysis; resonance finding, Vibration measurements on very sensitive equipment (VC/Nano).
Application
- Condition monitoring of rotating machinery, like motors, pumps, compressors, turbines or gearboxes
- Route-based measurements at machines
- Roller bearing diagnosis
- Balancing
- Measurement of hand-transmitted and whole-body vibration; Ride comfort evaluation
- Run up/coast down analysis; resonance finding
- Vibrations on passenger and merchant ships
- Vibration measurement at very sensitive equipment (VC/Nano)
Properties
- Large screen with touch operation for clear user guidance
- 3 independent sensor channels
- Measurement of vibration acceleration, velocity and displacement
- Amplitude over rotation speed graphs
- Frequency analysis (FFT) with waterfall mode; Envelope analysis
- Weighting filters for hand-arm vibration and whole-body vibration
- RMS (1 s and infinite); vibration dose value (VDV); vector sum; peak; maximum peak
- TEDS sensor detection; Measurement point identification with RFID tags
- Tachometer input for RPM measurement
- Measurements saved on μSD card, PC connection via USB
- 3-channel time history plot of up to 10 hours
- Raw-signal recording as WAV file
SPECS
Measurement functions
Measurands Vibration acceleration, velocity, displacement Force, pressure, sound pressure
Overall values
RMS (1s/∞); Peak (1s/max.); Crest; VDV; main frequency
Measuring range acceleration
0.0000001 to 10000 (sensor dependent ) m/s²
Accuracy
±1 (> 5 % of full scale; mid-band ) %
ADC resolution
24 Bit
Lower frequency limit acceleration
0.4 to 5000 (34 high pass filters) Hz
Upper frequency limit acceleration
10 to 24000 (38 low pass filters) Hz
Weighting filters (human vibration)
Wb; Wc; Wd; Wh; Wj; Wk; Wm; unweighted
Frequency analysis
FFT; 1 to 22000 Hz; 3 channels
1024 to 65536 points; 0.1 to 48 Hz resolution
Windowing: Rechteck, Hann, Hamming, Flattop
Triggering: auto; tacho; level
Waterfall mode; spectrogram
Third-octave band analysis
1 to 160 Hz; 21 third-octave bands; 3 channels
Envelope analysis
Frequency markers für fault frequencies; bearing list
Measuring point identification
NFC reading interface for tags of types A, B, F and V
Measurement data storage
Micro SD card; removable; FAT file system, via USB
File types
CSV for measurement data, BMP for screen shots; WAV for raw signals
Connectors
Input signals
IEPE
Input connector
Socket Binder 711; 4 poles
IEPEconstant current
3.5 to 4.5 mA
TEDS support
IEEE 1451.4; templates 25, 27, 28
Digital interfaces
USB 3.0 HS; MSC; type C
Power Supply
Battery
NiMH; 4.8 V; 9 Ah; built-in
Battery operating time
10 to 14 h
External supply voltage
5 VDC
External supply current
<2500 mA
Supply connection
USB-C
Case Data
Dimensions without connectors
215 x 150 x 50 (W x H x D) mm
Weight
1300 g
Protection grade
IP65
Operating temperature range
-20 to 60 (95 % rel. humidity without condensation) °C
Scope of delivery Carrying case; USB cable; charger
Optional Accessories
VM100-RPM: License for amplitude-rotation speed measurement
VM100-MAC: License for machine vibration and measurement route management
VM100-ENV: License for envelope analysis for roller bearing diagnosis
VM100-BAL: License for balancing in one or two planes
VM100-VC: License for third-octave analysis; VC and Nano criteria
VM100-HA: License for hand-arm vibration measurement
VM100-WB1: License for whole-body vibration measurement
034-B711-BNCf: sensor adapter cable with 3 BNC female plugs; 0.5 m
VM100-LS: Photoelectric reflex switch with 5 m cable and magnetic stand
The licenses VM100-AMP (amplitude-time/plotter) and VM100-FFT are included.
Also you can check product : NEW MMF VM100A Vibration Analyzer with 9 channels
Universal vibration analyzer with simple operation via touch screen, Frequency analysis and overall value measurements with long-term plot (scope of delivery), Route-based measurements on machines, Rolling bearing diagnosis, Balancing in one or two planes, Hand-arm and whole-body vibration measurement; ride comfort evaluation, Run-up and coast-down analysis; resonance finding, Vibration measurements on very sensitive equipment (VC/Nano).
Application
- Condition monitoring of rotating machinery, like motors, pumps, compressors, turbines or gearboxes
- Route-based measurements at machines
- Roller bearing diagnosis
- Balancing
- Measurement of hand-transmitted and whole-body vibration; Ride comfort evaluation
- Run up/coast down analysis; resonance finding
- Vibrations on passenger and merchant ships
- Vibration measurement at very sensitive equipment (VC/Nano)
Properties
- Large screen with touch operation for clear user guidance
- 3 independent sensor channels
- Measurement of vibration acceleration, velocity and displacement
- Amplitude over rotation speed graphs
- Frequency analysis (FFT) with waterfall mode; Envelope analysis
- Weighting filters for hand-arm vibration and whole-body vibration
- RMS (1 s and infinite); vibration dose value (VDV); vector sum; peak; maximum peak
- TEDS sensor detection; Measurement point identification with RFID tags
- Tachometer input for RPM measurement
- Measurements saved on μSD card, PC connection via USB
- 3-channel time history plot of up to 10 hours
- Raw-signal recording as WAV file
SPECS
Measurement functions
Measurands Vibration acceleration, velocity, displacement Force, pressure, sound pressure
Overall values
RMS (1s/∞); Peak (1s/max.); Crest; VDV; main frequency
Measuring range acceleration
0.0000001 to 10000 (sensor dependent ) m/s²
Accuracy
±1 (> 5 % of full scale; mid-band ) %
ADC resolution
24 Bit
Lower frequency limit acceleration
0.4 to 5000 (34 high pass filters) Hz
Upper frequency limit acceleration
10 to 24000 (38 low pass filters) Hz
Weighting filters (human vibration)
Wb; Wc; Wd; Wh; Wj; Wk; Wm; unweighted
Frequency analysis
FFT; 1 to 22000 Hz; 3 channels
1024 to 65536 points; 0.1 to 48 Hz resolution
Windowing: Rechteck, Hann, Hamming, Flattop
Triggering: auto; tacho; level
Waterfall mode; spectrogram
Third-octave band analysis
1 to 160 Hz; 21 third-octave bands; 3 channels
Envelope analysis
Frequency markers für fault frequencies; bearing list
Measuring point identification
NFC reading interface for tags of types A, B, F and V
Measurement data storage
Micro SD card; removable; FAT file system, via USB
File types
CSV for measurement data, BMP for screen shots; WAV for raw signals
Connectors
Input signals
IEPE
Input connector
Socket Binder 711; 4 poles
IEPEconstant current
3.5 to 4.5 mA
TEDS support
IEEE 1451.4; templates 25, 27, 28
Digital interfaces
USB 3.0 HS; MSC; type C
Power Supply
Battery
NiMH; 4.8 V; 9 Ah; built-in
Battery operating time
10 to 14 h
External supply voltage
5 VDC
External supply current
<2500 mA
Supply connection
USB-C
Case Data
Dimensions without connectors
215 x 150 x 50 (W x H x D) mm
Weight
1300 g
Protection grade
IP65
Operating temperature range
-20 to 60 (95 % rel. humidity without condensation) °C
Scope of delivery Carrying case; USB cable; charger
Optional Accessories
VM100-RPM: License for amplitude-rotation speed measurement
VM100-MAC: License for machine vibration and measurement route management
VM100-ENV: License for envelope analysis for roller bearing diagnosis
VM100-BAL: License for balancing in one or two planes
VM100-VC: License for third-octave analysis; VC and Nano criteria
VM100-HA: License for hand-arm vibration measurement
VM100-WB1: License for whole-body vibration measurement
034-B711-BNCf: sensor adapter cable with 3 BNC female plugs; 0.5 m
VM100-LS: Photoelectric reflex switch with 5 m cable and magnetic stand
The licenses VM100-AMP (amplitude-time/plotter) and VM100-FFT are included.
Also you can check product : NEW MMF VM100A Vibration Analyzer with 9 channels
- Availability: 18 In Stock
- Model: MMF VM100B
-
Brand:
