NEW Pruftechnik VIBSCANNER 2 EX High-Speed Vibration Measurement Tool
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues. This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
$3,850.00
VIBSCANNER 2 EX
All-in-one vibration measurement tool featuring explosion protection standards
Safe, simple, precise
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues.
This is the ultimate tool for fast and accurate machine vibration measurements. The VibScanner 2 Ex heightens efficiency and data quality. In just a quarter of the time of a standard data-collector, it precisely measures available data in three axes. Equipped with a triaxial sensor, it requires only one measurement point and the click of a button to begin collecting machine data.
This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
FEATURES
Quick, accurate measurements
This system delivers measurements up to four times faster than the industry standard
Easy to use
Users get a highly intuitive user interface with a simple one-button-push to collect machine data.
Explosion protected
The VibScanner 2 Ex is certified for safe use in high-risk environments where a mixture with air or flammable substances – in the form of gas, dusts, fibers and flyings – is likely to occur during regular operation.
NEW: Remote Condition Monitoring Services
The VIBSCANNER 2EX remote condition monitoring service helps maximize the success of your condition monitoring program, giving direct access to our in-house experts with decades of experience
Get access to data analytics, insights on asset status, guided recommendations, detect faults early, improve your maintenance planning, reduce costs, increase the lifespan of your machinery, and avoid unplanned downtime.
Specifically designed for route-based maintenance jobs in hazardous areas
Fast and comprehensive data collection
No training is required, thanks to an intuitive graphical user interface
Minimal time spent at machine, due to parallel digital data processing
Real triaxial data acquisition
RPM Finder generates swift RPM determination based on signal
Touch display: shock-proof, high-contrast, glove-enabled
TECHNOLOGY
The "Triax-Effect"
The VibScanner 2 Ex will diminish worries about finding the right measurement points at the machine. Because it features a Prüftechnik triaxial sensor, just one measurement point is required instead of three separate ones. This saves considerable time without sacrificing data quality. The “Triax-Effect” enables users to obtain measurements up to four times faster than the industry standard while achieving new levels of data quality.
ones. VibScanner 2 Ex thus saves considerable time without sacrificing data quality. The “Triax-Effect” enables obtaining measurements up to four times faster than the industry standard while achieving new levels of data quality.
Specifications
Measurement Channels
Number
3 synchronous analog channels (X/Y/Z)
Z channel (0 ... 50 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE Current Linedrive
X/Y channel (0 ... 10 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE
Dynamic range
109.5 dB (total)
Sampling rate
up to 131 kHz per channel
Signal processing
3 x 24 bit ADCs
Measuring range / Accuracy
Vibration acceleration: dependent on used sensor
Shock pulse: -10 dBsv to 80 dBsv /- 2 dBsv
Fulfilled standard
DIN ISO 2954:2012 (2-1 kHz, 10 Hz -1 kHz, 10-10 KHz)
Display
Type
Capacitive touchscreen
Optically bonded for high contrast and increased shock resistance
Active area
95 x 54 mm (3 3/4” x 2 1/8”)
Size
10.9 cm (4 1/3“)
Color depth
16 million colors
Viewing angle
< 140°
Operation
Multi touch – gesture control Glove-compatible
Illumination
Background lighting, adjustable
Ambient light sensor
Yes
Supply
Type
Li ion rechargeable battery
Nominal voltage
7.3V
Energy density
50 Wh
Charge time,typical
3.5 h (0 ... 100 % @ 25 °C / 77 °F)
2.5 h (0 ... 80 % @ 25 °C / 77 °F)
Charging temperature
10 °C ... 40 °C
[ 50 °F ... 104 °F]
Operating time, typical
10 h (cont. operation, rech. battery 100 %)
5 h (cont. operation, rech. battery 50 %)
Power adapter
100-240 V~, 50-60 Hz (input) 12 V 3 A (output)
Energy saving mode
Yes
Computer
Processor
ARM A9 - Quadcore 1 GHz
Operating elements
Touchscreen, ON/OFF key, Enter key
Memory
microSD card, 32 GB for measurement data, permanently
installed 2 GB RAM
USB
1 x USB 2.0, device interface
RFID
RFID reader module for PRÜFTECHNIK transponder:
ALI 50.628 EX0-25
Complies with ISO 14443a and ISO 15693
Reading distance: 2...3 cm (13/16” ... 1 3/16”)
WiFi
IEEE 802.11a/b/g/n/ac
Throughput: < 200 Mbps
Security: WPA2
Stroboscope
Frequency range: 0.1 – 1000 Hz
Resolution: 0.06 1/min.
LEDs: Risk group 1 per IEC 62471
LED
1x RGB LED (display for battery status and charging
process)
Environment/ mechanical system
Connections
Socket for power adapter Micro USB for data cable
Plug-in connector (8-pole) for signal cable
Housing, EX device
Housing: PC
Sheath: TPE, black, antistatic, conductive
Dimensions
203 x 143 x 76mm (LxWxH) (8 x 5 5/8 x 3”)
Weight
approx. 1.0 kg (35.3 oz)
Degree of protection
IP55
Temperature range
Operation: 0°C ... 50°C [ 32 °F ...122 °F ]
Storage: -20 °C ... 60 °C [-4 °F ... 140 °F ]
Air humidity
0 ... 90 %, non-condensing
Certifications CE, RoHS, FCC, FCC/IC, ATEX, IECEx,
NEC 500/505, CEC Annex J18, CEC sect. 18
Operation in the Ex-zone
General specifications
Ex-Data CSA – only for U.S. and Canada
CSA certificate
number:
CSA20CA80035102X
Install per control drawing:
LIT 52.300.EN
Marking of the device:
Ex ec [ic] IIC T4 Gc
Ex tc [ic] IIIB T135°C Dc
Class I, Zone 2, AEx ec [ic] IIC T4 Gc
Zone 22, AEx tc [ic] IIIB T135°C Dc
Class I, Div. 2, Groups A, B, C, D T4
Class II, Div. 2, Groups F, G, T4, Class III, Div.2
Associated equipment for Class I, Division 2,
Groups A, B, C, D
Associated equipment for Class II, Division 2,
Groups F, G
Associated equipment for Class III, Division 2
Ex-Data ATEX, IECEx
ATEX certificate number:
EPS 19 ATEX 1 119 X
IECEx certificate number:
IECEx EPS 19.0057X
Marking of the device:
II 3G Ex ec [ic] IIC T4 Gc
II 3D Ex tc [ic] IIIB T135°C Dc
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - VIbration Analysis and Balancing
All-in-one vibration measurement tool featuring explosion protection standards
Safe, simple, precise
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues.
This is the ultimate tool for fast and accurate machine vibration measurements. The VibScanner 2 Ex heightens efficiency and data quality. In just a quarter of the time of a standard data-collector, it precisely measures available data in three axes. Equipped with a triaxial sensor, it requires only one measurement point and the click of a button to begin collecting machine data.
This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
FEATURES
Quick, accurate measurements
This system delivers measurements up to four times faster than the industry standard
Easy to use
Users get a highly intuitive user interface with a simple one-button-push to collect machine data.
Explosion protected
The VibScanner 2 Ex is certified for safe use in high-risk environments where a mixture with air or flammable substances – in the form of gas, dusts, fibers and flyings – is likely to occur during regular operation.
NEW: Remote Condition Monitoring Services
The VIBSCANNER 2EX remote condition monitoring service helps maximize the success of your condition monitoring program, giving direct access to our in-house experts with decades of experience
Get access to data analytics, insights on asset status, guided recommendations, detect faults early, improve your maintenance planning, reduce costs, increase the lifespan of your machinery, and avoid unplanned downtime.
Specifically designed for route-based maintenance jobs in hazardous areas
Fast and comprehensive data collection
No training is required, thanks to an intuitive graphical user interface
Minimal time spent at machine, due to parallel digital data processing
Real triaxial data acquisition
RPM Finder generates swift RPM determination based on signal
Touch display: shock-proof, high-contrast, glove-enabled
TECHNOLOGY
The "Triax-Effect"
The VibScanner 2 Ex will diminish worries about finding the right measurement points at the machine. Because it features a Prüftechnik triaxial sensor, just one measurement point is required instead of three separate ones. This saves considerable time without sacrificing data quality. The “Triax-Effect” enables users to obtain measurements up to four times faster than the industry standard while achieving new levels of data quality.
ones. VibScanner 2 Ex thus saves considerable time without sacrificing data quality. The “Triax-Effect” enables obtaining measurements up to four times faster than the industry standard while achieving new levels of data quality.
Specifications
Measurement Channels
Number
3 synchronous analog channels (X/Y/Z)
Z channel (0 ... 50 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE Current Linedrive
X/Y channel (0 ... 10 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE
Dynamic range
109.5 dB (total)
Sampling rate
up to 131 kHz per channel
Signal processing
3 x 24 bit ADCs
Measuring range / Accuracy
Vibration acceleration: dependent on used sensor
Shock pulse: -10 dBsv to 80 dBsv /- 2 dBsv
Fulfilled standard
DIN ISO 2954:2012 (2-1 kHz, 10 Hz -1 kHz, 10-10 KHz)
Display
Type
Capacitive touchscreen
Optically bonded for high contrast and increased shock resistance
Active area
95 x 54 mm (3 3/4” x 2 1/8”)
Size
10.9 cm (4 1/3“)
Color depth
16 million colors
Viewing angle
< 140°
Operation
Multi touch – gesture control Glove-compatible
Illumination
Background lighting, adjustable
Ambient light sensor
Yes
Supply
Type
Li ion rechargeable battery
Nominal voltage
7.3V
Energy density
50 Wh
Charge time,typical
3.5 h (0 ... 100 % @ 25 °C / 77 °F)
2.5 h (0 ... 80 % @ 25 °C / 77 °F)
Charging temperature
10 °C ... 40 °C
[ 50 °F ... 104 °F]
Operating time, typical
10 h (cont. operation, rech. battery 100 %)
5 h (cont. operation, rech. battery 50 %)
Power adapter
100-240 V~, 50-60 Hz (input) 12 V 3 A (output)
Energy saving mode
Yes
Computer
Processor
ARM A9 - Quadcore 1 GHz
Operating elements
Touchscreen, ON/OFF key, Enter key
Memory
microSD card, 32 GB for measurement data, permanently
installed 2 GB RAM
USB
1 x USB 2.0, device interface
RFID
RFID reader module for PRÜFTECHNIK transponder:
ALI 50.628 EX0-25
Complies with ISO 14443a and ISO 15693
Reading distance: 2...3 cm (13/16” ... 1 3/16”)
WiFi
IEEE 802.11a/b/g/n/ac
Throughput: < 200 Mbps
Security: WPA2
Stroboscope
Frequency range: 0.1 – 1000 Hz
Resolution: 0.06 1/min.
LEDs: Risk group 1 per IEC 62471
LED
1x RGB LED (display for battery status and charging
process)
Environment/ mechanical system
Connections
Socket for power adapter Micro USB for data cable
Plug-in connector (8-pole) for signal cable
Housing, EX device
Housing: PC
Sheath: TPE, black, antistatic, conductive
Dimensions
203 x 143 x 76mm (LxWxH) (8 x 5 5/8 x 3”)
Weight
approx. 1.0 kg (35.3 oz)
Degree of protection
IP55
Temperature range
Operation: 0°C ... 50°C [ 32 °F ...122 °F ]
Storage: -20 °C ... 60 °C [-4 °F ... 140 °F ]
Air humidity
0 ... 90 %, non-condensing
Certifications CE, RoHS, FCC, FCC/IC, ATEX, IECEx,
NEC 500/505, CEC Annex J18, CEC sect. 18
Operation in the Ex-zone
General specifications
Ex-Data CSA – only for U.S. and Canada
CSA certificate
number:
CSA20CA80035102X
Install per control drawing:
LIT 52.300.EN
Marking of the device:
Ex ec [ic] IIC T4 Gc
Ex tc [ic] IIIB T135°C Dc
Class I, Zone 2, AEx ec [ic] IIC T4 Gc
Zone 22, AEx tc [ic] IIIB T135°C Dc
Class I, Div. 2, Groups A, B, C, D T4
Class II, Div. 2, Groups F, G, T4, Class III, Div.2
Associated equipment for Class I, Division 2,
Groups A, B, C, D
Associated equipment for Class II, Division 2,
Groups F, G
Associated equipment for Class III, Division 2
Ex-Data ATEX, IECEx
ATEX certificate number:
EPS 19 ATEX 1 119 X
IECEx certificate number:
IECEx EPS 19.0057X
Marking of the device:
II 3G Ex ec [ic] IIC T4 Gc
II 3D Ex tc [ic] IIIB T135°C Dc
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - VIbration Analysis and Balancing
- Availability: 12 In Stock
- Model: VIBSCANNER 2 EX
-
Brand:
