NEW Pruftechnik VIBXPERT EX Vibration Analyzer and Balancing Tool
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.VIBXPERT EX collects field data including vibration information, bearing condition, inspection and process data and seamlessly integrates with the OMNITREND Center software platform for in-depth analysis.
4,842.66€
Vibration analysis in explosive environments
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.
VIBXPERT EX collects field data including vibration information, bearing condition, inspection and process data and seamlessly integrates with the OMNITREND Center software platform for in-depth analysis.
The modular firmware structure allows you to upgrade the VIBXPERT EX from a route data collector to a full-blown troubleshooting device with advanced features such as coast down/run-up measurements, event recording, ODS & modal analysis and cross-channel phase measurement.
It is also possible to connect the VIBXPERT EX to protection systems via the buffered outputs. This enables you to perform additional analysis such as shaft vibration, shaft centerline plots or orbits e.g. on turbines, compressors and other turbomachinery.
As with all our data collectors and vibration analyzers, you will benefit from free software and firmware updates, and low ownership cost.
Intrinsically safe vibration analysis instrument and field balancer
Approved for ATEX Zone 1
Intuitive joystick operation (left- or right-handed)
Fast data acquisition with "trending spectra"
Robust aluminum housing
Compatible with VIBCODE transducer
Highest resolution for detailed frequency analysis
Interface to machine protection systems for further analysis
Technical Data
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range
DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range
96 dB (measurement) / 136 dB (total)
Sampling frequency
up to 131 kHz per channel
Analog, Temperature, 1x
Thermocouple (type K)
Digital, Pulse/ Tacho, 1x
RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage
± 26 V
Switching threshold for 0 V ... 26 V signal
max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal
min. -8 V rising, max. -10 V falling
Pulse width
< 0.1 ms
Output
Stroboscope control
TTL output level
Frequency range
0 - 500 Hz
Resolution
0.05 Hz
Signal-Out
Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range
0.5 Hz - 40 kHz
Output impedance
100 Ohm
Measurement range / Accuracy
Vibration acceleration
depends on the sensor connected
Shock pulse
-10 ...80 dBsv / ± 3dBsv
RPM
10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K
-50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled
Frequency response acc to ISO 2954
Display
Type
LCD, backlit
Pixel area
115 x 78 mm [ 4 1/2" x 3 1/16"]
Resolution
1/2 VGA (480 x 320 pixel)
Color depth
16 grey scales
Power supply
Battery type
Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time
< 5 hours in the instrument
Charger, input
110-240 V / 50-60 Hz
Charging temperature
0°C ... 50°C [ 32 °F ... 122 °F]
Computer
Processor
Intel Strong ARM 206 MHz
Keyboard
2 joysticks and 12 keys for right-hand or left-hand operation. Keyboard illumination controlled by ambient light.
Memory
Internal: 64 MB RAM; Compact Flash: 1 GB or 4 GB
Serial interface
RS 232, <115 kBaud
USB interface
USB host for printing; USB slave for data exchange with OMNITREND
Ethernet interface
10 Mbit (10Base T), 10 Mbit (10Base T)
Environment / General
Connectors
Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to
VIBSCANNER
Housing
Aluminium
Dimensions
250 x 220 x 37 mm [ 9 13/16" x 8 11/16" x 1 7/16" ] (LxWxH)
Weight
approx. 2.3 kg [81 oz]
Environmental protection
IP65, dust and splash-proofed
Temperature range
-10°C ... 60°C (Operation), [ 14 °F ... 140°F]
-20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Intrinsic safety details
Marking
II 2G Ex ib IIC T4
Temperature range
-10 °C ... 60 °C
Also you can check product : NEW Pruftechnik VIBXPERT II Vibration Analysis System and Balancing Tool
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.
VIBXPERT EX collects field data including vibration information, bearing condition, inspection and process data and seamlessly integrates with the OMNITREND Center software platform for in-depth analysis.
The modular firmware structure allows you to upgrade the VIBXPERT EX from a route data collector to a full-blown troubleshooting device with advanced features such as coast down/run-up measurements, event recording, ODS & modal analysis and cross-channel phase measurement.
It is also possible to connect the VIBXPERT EX to protection systems via the buffered outputs. This enables you to perform additional analysis such as shaft vibration, shaft centerline plots or orbits e.g. on turbines, compressors and other turbomachinery.
As with all our data collectors and vibration analyzers, you will benefit from free software and firmware updates, and low ownership cost.
Intrinsically safe vibration analysis instrument and field balancer
Approved for ATEX Zone 1
Intuitive joystick operation (left- or right-handed)
Fast data acquisition with "trending spectra"
Robust aluminum housing
Compatible with VIBCODE transducer
Highest resolution for detailed frequency analysis
Interface to machine protection systems for further analysis
Technical Data
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range
DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range
96 dB (measurement) / 136 dB (total)
Sampling frequency
up to 131 kHz per channel
Analog, Temperature, 1x
Thermocouple (type K)
Digital, Pulse/ Tacho, 1x
RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage
± 26 V
Switching threshold for 0 V ... 26 V signal
max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal
min. -8 V rising, max. -10 V falling
Pulse width
< 0.1 ms
Output
Stroboscope control
TTL output level
Frequency range
0 - 500 Hz
Resolution
0.05 Hz
Signal-Out
Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range
0.5 Hz - 40 kHz
Output impedance
100 Ohm
Measurement range / Accuracy
Vibration acceleration
depends on the sensor connected
Shock pulse
-10 ...80 dBsv / ± 3dBsv
RPM
10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K
-50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled
Frequency response acc to ISO 2954
Display
Type
LCD, backlit
Pixel area
115 x 78 mm [ 4 1/2" x 3 1/16"]
Resolution
1/2 VGA (480 x 320 pixel)
Color depth
16 grey scales
Power supply
Battery type
Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time
< 5 hours in the instrument
Charger, input
110-240 V / 50-60 Hz
Charging temperature
0°C ... 50°C [ 32 °F ... 122 °F]
Computer
Processor
Intel Strong ARM 206 MHz
Keyboard
2 joysticks and 12 keys for right-hand or left-hand operation. Keyboard illumination controlled by ambient light.
Memory
Internal: 64 MB RAM; Compact Flash: 1 GB or 4 GB
Serial interface
RS 232, <115 kBaud
USB interface
USB host for printing; USB slave for data exchange with OMNITREND
Ethernet interface
10 Mbit (10Base T), 10 Mbit (10Base T)
Environment / General
Connectors
Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to
VIBSCANNER
Housing
Aluminium
Dimensions
250 x 220 x 37 mm [ 9 13/16" x 8 11/16" x 1 7/16" ] (LxWxH)
Weight
approx. 2.3 kg [81 oz]
Environmental protection
IP65, dust and splash-proofed
Temperature range
-10°C ... 60°C (Operation), [ 14 °F ... 140°F]
-20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Intrinsic safety details
Marking
II 2G Ex ib IIC T4
Temperature range
-10 °C ... 60 °C
Also you can check product : NEW Pruftechnik VIBXPERT II Vibration Analysis System and Balancing Tool