NEW Pruftechnik VIBXPERT II Vibration Analysis System and Balancing Tool
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis. The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine.
£2,518.73
The mobile solution for machinery health monitoring
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine. The robust design enables both fast and complex interventions. Whether in clinically clean systems, or harsh industrial environments. VIBXPERT II sets the standard in mobile machine and plant condition monitoring.
In addition to reliable, fast, and highly effective data analysis, the VIBXPERT II can also be used for operational balancing. This makes the VIBXPERT II the most powerful and effective device in mobile condition monitoring. VIBXPERT II is compatible with PRUFTECHNIK's own OMNITREND Center analysis software, enabling highly efficient and precise analysis results. Center analysis software, enabling highly efficient and precise analysis results.
Portable all-in-one system for effective vibration monitoring
Route-based data collection
Vibration analysis
One and two plane field balancing
Acceptance measurements with machine templates
Troubleshooting
Multimeter
Data logging
Visual inspection
Automatic Switchbox
The high-reliability solution for routes
High-quality data is critical to the success of your reliability-based maintenance program (RbM). However, many factors can significantly impact data quality.
Vibration readings of route-based data collection must be measured at exactly the same location every time. Measurements have to be performed quickly in order to save time and even untrained staff may have to collect data.
Last but not least, how can you make hard-to-reach measurement locations part of your reliability program without exposing employees to safety hazards during data collection?
PRUFTECHNIK’s Automatic Switchbox for VIBXPERT II is exactly the right solution. Compared to a standard switchbox whereby operators still may mix up measurement channels as they have to manually “turn the knob”, the proven Automatic Switchbox solution rules out human errors.
PRUFTECHNIK’s unique concept guarantees:
Maximum reliability of vibration data
Maximum efficiency – never has routine data collection been this short
Maximum security for operators
Maximum coverage - unlimited cable length with PRUFTECHNIK’s unique sensor concept.
General specifications
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range
DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range
96 dB (measurement) / 136 dB (total)
Sampling frequency
up to 131 kHz per channel
Impedance
90 kOhm, with cable VIB 5.433
Analog, Temperature,1x
Thermocouple (type K)
Digital, Pulse/ Tacho,1x
RPM, Trigger, Keyphaser with pulse and AC signals: 0 V . 26 V or -26 V ... 0 V
Max. input voltage
± 26 V
Switching threshold for 0 V ... 26 V signal
max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal
min. -8 V rising, max. -10 V falling
Pulse width
< 0.1 ms
Output
Stroboscope control
TTL
Frequency range
0 - 500 Hz
Resolution
0.05 Hz
Signal-Out
Connection for headphones to listen to the analog input
signal; signal processing (oscilloscope)
Frequency range
0.5 Hz - 40 kHz
Output impedance
100 Ohm
Measurement range / Accuracy
Vibration acceleration
depends on the sensor connected
Shock pulse
-10 ...80 dBsv / ± 3dBsv
RPM
10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower
accuracy is applicable)
Temperature, type K
-50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled
Frequency response acc to ISO 2954
Display
Type
TFT-LCD, backlit
Pixel area
116 x 87 mm
Resolution
VGA (640 x 480 pixel) with 140 ppi
Color depth
18 bit (262144 colors)
Power supply
Battery type
Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time
< 5 hours in the instrument
Charger, input
110-240 V / 50-60 Hz
Charging temperature
0°C ... 50°C [ 32 °F ... 122°F]
Computer
Processor
ARM CPU 800 MHz
Keyboard
1 navigation pad and 7 keys (Zoom, Escape, Function,
Help, Menu, On/Off); Keyboard illumination controlled by ambient light.
Memory
Internal: 128 MB DDR RAM; built-in CF card, has a capacity of 4GB, of which 2.7 GB is available for user data (non-removable)
Serial interface
RS 232, <115 kBaud
USB interface
USB 2.0
Ethernet interface
100 Mbit (100Base T), 10 Mbit (10Base T)
Environment /General
Connectors
Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing
ABS plastics
Dimensions
186 x 162 x 52 mm (LxWxH), [ 7 5/16” x 6 3/8” x 2
1/16” ]
Weight
approx. 1.1 kg [39 oz]
Temperature range
-10°C ... 60°C (Operation), [ 14 °F ... 140°F] -20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - Vibration Analysis and Balancing
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine. The robust design enables both fast and complex interventions. Whether in clinically clean systems, or harsh industrial environments. VIBXPERT II sets the standard in mobile machine and plant condition monitoring.
In addition to reliable, fast, and highly effective data analysis, the VIBXPERT II can also be used for operational balancing. This makes the VIBXPERT II the most powerful and effective device in mobile condition monitoring. VIBXPERT II is compatible with PRUFTECHNIK's own OMNITREND Center analysis software, enabling highly efficient and precise analysis results. Center analysis software, enabling highly efficient and precise analysis results.
Portable all-in-one system for effective vibration monitoring
Route-based data collection
Vibration analysis
One and two plane field balancing
Acceptance measurements with machine templates
Troubleshooting
Multimeter
Data logging
Visual inspection
Automatic Switchbox
The high-reliability solution for routes
High-quality data is critical to the success of your reliability-based maintenance program (RbM). However, many factors can significantly impact data quality.
Vibration readings of route-based data collection must be measured at exactly the same location every time. Measurements have to be performed quickly in order to save time and even untrained staff may have to collect data.
Last but not least, how can you make hard-to-reach measurement locations part of your reliability program without exposing employees to safety hazards during data collection?
PRUFTECHNIK’s Automatic Switchbox for VIBXPERT II is exactly the right solution. Compared to a standard switchbox whereby operators still may mix up measurement channels as they have to manually “turn the knob”, the proven Automatic Switchbox solution rules out human errors.
PRUFTECHNIK’s unique concept guarantees:
Maximum reliability of vibration data
Maximum efficiency – never has routine data collection been this short
Maximum security for operators
Maximum coverage - unlimited cable length with PRUFTECHNIK’s unique sensor concept.
General specifications
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range
DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range
96 dB (measurement) / 136 dB (total)
Sampling frequency
up to 131 kHz per channel
Impedance
90 kOhm, with cable VIB 5.433
Analog, Temperature,1x
Thermocouple (type K)
Digital, Pulse/ Tacho,1x
RPM, Trigger, Keyphaser with pulse and AC signals: 0 V . 26 V or -26 V ... 0 V
Max. input voltage
± 26 V
Switching threshold for 0 V ... 26 V signal
max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal
min. -8 V rising, max. -10 V falling
Pulse width
< 0.1 ms
Output
Stroboscope control
TTL
Frequency range
0 - 500 Hz
Resolution
0.05 Hz
Signal-Out
Connection for headphones to listen to the analog input
signal; signal processing (oscilloscope)
Frequency range
0.5 Hz - 40 kHz
Output impedance
100 Ohm
Measurement range / Accuracy
Vibration acceleration
depends on the sensor connected
Shock pulse
-10 ...80 dBsv / ± 3dBsv
RPM
10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower
accuracy is applicable)
Temperature, type K
-50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled
Frequency response acc to ISO 2954
Display
Type
TFT-LCD, backlit
Pixel area
116 x 87 mm
Resolution
VGA (640 x 480 pixel) with 140 ppi
Color depth
18 bit (262144 colors)
Power supply
Battery type
Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time
< 5 hours in the instrument
Charger, input
110-240 V / 50-60 Hz
Charging temperature
0°C ... 50°C [ 32 °F ... 122°F]
Computer
Processor
ARM CPU 800 MHz
Keyboard
1 navigation pad and 7 keys (Zoom, Escape, Function,
Help, Menu, On/Off); Keyboard illumination controlled by ambient light.
Memory
Internal: 128 MB DDR RAM; built-in CF card, has a capacity of 4GB, of which 2.7 GB is available for user data (non-removable)
Serial interface
RS 232, <115 kBaud
USB interface
USB 2.0
Ethernet interface
100 Mbit (100Base T), 10 Mbit (10Base T)
Environment /General
Connectors
Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing
ABS plastics
Dimensions
186 x 162 x 52 mm (LxWxH), [ 7 5/16” x 6 3/8” x 2
1/16” ]
Weight
approx. 1.1 kg [39 oz]
Temperature range
-10°C ... 60°C (Operation), [ 14 °F ... 140°F] -20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - Vibration Analysis and Balancing
- Availability: 11 In Stock
- Model: VIBXPERT II
-
Brand:
