NEW Svantek SV 258 PRO Vibration and Noise Monitoring Station
The vibration and noise monitoring station SV258 PRO is dedicated to building vibration measurements that use methods based on Peak Particle Velocity and Dominant Frequency. The measurement of human vibration exposure in buildings is possible as the program allows simultaneous measurement of velocity and acceleration of vibrations with two independent steps of recording. In addition, it is possible to enrich the measurement with noise monitoring measurement data.
£2,479.06
SV 258 PRO
The vibration and noise monitoring station SV258 PRO is dedicated to building vibration measurements that use methods based on Peak Particle Velocity and Dominant Frequency. The measurement of human vibration exposure in buildings is possible as the program allows simultaneous measurement of velocity and acceleration of vibrations with two independent steps of recording. In addition, it is possible to enrich the measurement with noise monitoring measurement data.
Users can use predefined settings compatible with commonly used standards such as DIN 4150-3 or BS 7385-2 or configure a criterion curve based on FFT or 1/3 Octave analysis by local standards. The 1/3 octave method is also used for vibration measurements of sensitive equipment with VC curves.
Vibration and noise monitoring system
Vibration and noise monitoring with SV258 PRO is controlled remotely with a 4G modem that transmits measurement data to the SvanNET server where the user has access to current data, files with historical data and can also generate a measurement report. The system generates SMS and Email notifications as well as visual and audible alarms (optional alarm lamp). In addition to simple triggers from PPV or LEQ values, you can configure alarms from standard curves (e.g. DIN 4150-3) or custom curves based on FFT or 1/3 octaves for sensitive equipment. It is possible to move the criterion curve up or down the scale so that the alarm is generated earlier or later. The time and value of the alarm are saved together to the memory of the meter.
The vibration time history in the form of WAV is stored for all three channels and is used for the verification of vibration sources. An accurate post-analysis of the frequency content of the signal is available in the SvanPC program.
FEATURES :
Vibration and noise analysis
PPV, Dominant Frequency, PPV Vector Sum, VDV, FFT, 1/3 Octave
The choice of building vibration standard and the type of building (curve) enables the vibration velocity measurements according to commonly used standards such as DIN 4150-3 or BS 7385-2 that use Peak Particle Velocity and the Dominant Frequency method. Peak Particle Velocity (PPV), PPV Vector Sum, and Vibration Dose Value (VDV) are measured simultaneously in three axes. The time-history logging of vibration velocity results (PPV) and acceleration (VDV) is performed simultaneously. If you can’t find the vibration standard on the list of implemented ones, you can always input customized values to create a criterion curve based on FFT or 1/3 octave (RMS, PEAK, or MAX). All these amazing features are included!
Alarms and Events
SMS and email, beacon lamps, or buzzer alarms
The system generates SMS and e-mail notifications as well as visual and audio alarms when excessive vibration is detected. In addition to simple triggers from PPV or LEQ values, you can configure alarms from standard curves (e.g. DIN 4150-3) or custom curves based on FFT or 1/3 octaves. The triggering of an alarm starts the event, whose length is configurable. After the event time has elapsed, the instrument starts analyzing the data and indicates the highest PPV value and its dominant frequency. The time and value of the event are saved in the meter’s memory. All triggering is done by the instrument firmware, limiting the risk of a lack of alarms due to a bad connection with a cloud service.
Sound and vibration
Simultaneous vibrations and class 1 noise monitoring
The SV258PRO Monitoring Station uses 4 channels: 3 for measurement of vibration velocity and acceleration and the fourth to measure sound in accordance with the requirements of IEC 61672 Class 1. The results (e.g., LEQ, MAX, MIN, or PEAK) are recorded together with the vibration velocity and acceleration steps, making the correlation of sound and vibrations much easier. The system uses a ROLLING LEQ or interval LEQ for ALARM and EVENT triggering!
Whole body vibration measurements
Measurement of human vibration exposure in buildings by ISO 2631-1, BS 6472, and DIN 4150-2
The station allows simultaneous measurement of vibration acceleration, allowing the measurement of VDV with a different recording step than PPV, making the reporting much easier. The analyzer has built-in weighing filters according to ISO 2631-1 and ISO 2631-2 as well as DIN 4150-2. It is also possible to measure the impact of vibration exposure using a 1/3 octave spectrum.
Portable monitoring system
A waterproof case dedicated to outdoor measurements
Military standard connectors provide reliable, robust, and waterproof cable connections. The station is ready for direct connection of a solar panel and can be powered by an internal battery or an outdoor DC power supply. The power is managed by the intelligent charging unit. The low-noise, hermetically sealed tri-axial piezoelectric accelerometer enables outdoor use without additional enclosures.
Applications
Building and ground vibrations
Vibration velocity and acceleration
SV 258 PRO measures triaxial velocity and acceleration vibration levels in parallel and calculates peak particle velocity and vibration dose value simultaneously. In addition to logging overall values and frequency spectra, the time domain signal is stored for post-processing purposes. SvanNET enables a plug-and-play connection to the Internet and easy management of measurement projects. Regardless of the SIM card type, and public or private IP numbers, SvanNET will establish a connection, giving full access to the measurement data via WEB BROWSER. FFT is used for dominant frequency determination according to BS and DIN standards. Alternatively, the RMS or PEAK velocity spectrum in 1/3 octave bands can be used for comparison with user curves.
Specs :
SVAN 958AG VIBRATION AND NOISE LEVEL METER & ANALYSER
Vibration Standards DIN 4150-3, DIN 4150-2, BS 7385-2, 22/09/1994, 23/07/1986, IN-1226, USER FFT, USER 1/3 OCTAVE
Noise Standards Class 1: IEC 61672-1:2002
Vibration Level Meter Mode PPV, DF, RMS, VDV, MAX, Peak, Peak-Peak, Vector, aw, awv
Sound Level Meter Mode SPL, Leq, SEL, Lden, Ltm3, Ltm5, Statistics – Ln (L1-L99), LMax, LMin, LPeak
Vibration Profiles Per Channel 2: velocity and accleration
Vibration Analyser 1/3 octave real-time analysis or FFT analysis
Time domain signal recording to WAV format
Filters In Velocity Profile DIN 80, DIN 315, VEL1
Filters In Acceleration Profile HP1, HP3, HP10, Wk, Wd, Wc, Wj, Wm, Wg, Wb
RMS & RMQ Detectors Digital true RMS & RMQ detectors with Peak detection, resolution 0.1 dB
Detector Time Constants Fast 125ms in accordance to DIN 4150-2
Accelerometer SV 84 triaxial high sensitivity (1 V/g),
noise floor RMS: 14 μm/s (VEL1), 2 μm/s (VEL3)
Vibration Measurement Range SV 84: 0.0005 ms2 RMS ÷ 50 ms-2 PEAK (accelerometer dependent)
Vibration Frequency Range SV 84: 0.2 Hz ÷ 315 Hz (accelerometer dependent) period
Ingress Protection Rating IP 65
Communication Interfaces USB, 3G modem
Power supply DC power supply / charger 11 V ÷ 30 V (waterproof)
Operation time on battery 17 Ah / 12 V
Modem on up to 3 days
Modem off up to 7 days
Solar Panel (not included) MPPT voltage 17.0 V ÷ 20.0 V
External DC source (not included) voltage range 10.5 V – 24 V
Environmental Conditions Temperature from -10oC to 50 oC
Dimensions 420 x 340 x 210 mm
Weight Approx. 9 kg with batteries
Kit includes:
SM 258 Pro Outdoor monitoring station for SVAN 958A including 17Ah battery, SP 270 3G modem
SB 270 waterproof power supply
SC 278 Cable for SV 207B (SV 84) and SV 258
SV 207B Building vibration accelerometer and mounting adapter
SA 251 Carying case for accelerometer and accessories
SvanNet Web interface and connectivity support
Also you can check product : NEW Svantek SVAN 958A Four Channels Sound - Vibration Meter and Analyzer
The vibration and noise monitoring station SV258 PRO is dedicated to building vibration measurements that use methods based on Peak Particle Velocity and Dominant Frequency. The measurement of human vibration exposure in buildings is possible as the program allows simultaneous measurement of velocity and acceleration of vibrations with two independent steps of recording. In addition, it is possible to enrich the measurement with noise monitoring measurement data.
Users can use predefined settings compatible with commonly used standards such as DIN 4150-3 or BS 7385-2 or configure a criterion curve based on FFT or 1/3 Octave analysis by local standards. The 1/3 octave method is also used for vibration measurements of sensitive equipment with VC curves.
Vibration and noise monitoring system
Vibration and noise monitoring with SV258 PRO is controlled remotely with a 4G modem that transmits measurement data to the SvanNET server where the user has access to current data, files with historical data and can also generate a measurement report. The system generates SMS and Email notifications as well as visual and audible alarms (optional alarm lamp). In addition to simple triggers from PPV or LEQ values, you can configure alarms from standard curves (e.g. DIN 4150-3) or custom curves based on FFT or 1/3 octaves for sensitive equipment. It is possible to move the criterion curve up or down the scale so that the alarm is generated earlier or later. The time and value of the alarm are saved together to the memory of the meter.
The vibration time history in the form of WAV is stored for all three channels and is used for the verification of vibration sources. An accurate post-analysis of the frequency content of the signal is available in the SvanPC program.
FEATURES :
Vibration and noise analysis
PPV, Dominant Frequency, PPV Vector Sum, VDV, FFT, 1/3 Octave
The choice of building vibration standard and the type of building (curve) enables the vibration velocity measurements according to commonly used standards such as DIN 4150-3 or BS 7385-2 that use Peak Particle Velocity and the Dominant Frequency method. Peak Particle Velocity (PPV), PPV Vector Sum, and Vibration Dose Value (VDV) are measured simultaneously in three axes. The time-history logging of vibration velocity results (PPV) and acceleration (VDV) is performed simultaneously. If you can’t find the vibration standard on the list of implemented ones, you can always input customized values to create a criterion curve based on FFT or 1/3 octave (RMS, PEAK, or MAX). All these amazing features are included!
Alarms and Events
SMS and email, beacon lamps, or buzzer alarms
The system generates SMS and e-mail notifications as well as visual and audio alarms when excessive vibration is detected. In addition to simple triggers from PPV or LEQ values, you can configure alarms from standard curves (e.g. DIN 4150-3) or custom curves based on FFT or 1/3 octaves. The triggering of an alarm starts the event, whose length is configurable. After the event time has elapsed, the instrument starts analyzing the data and indicates the highest PPV value and its dominant frequency. The time and value of the event are saved in the meter’s memory. All triggering is done by the instrument firmware, limiting the risk of a lack of alarms due to a bad connection with a cloud service.
Sound and vibration
Simultaneous vibrations and class 1 noise monitoring
The SV258PRO Monitoring Station uses 4 channels: 3 for measurement of vibration velocity and acceleration and the fourth to measure sound in accordance with the requirements of IEC 61672 Class 1. The results (e.g., LEQ, MAX, MIN, or PEAK) are recorded together with the vibration velocity and acceleration steps, making the correlation of sound and vibrations much easier. The system uses a ROLLING LEQ or interval LEQ for ALARM and EVENT triggering!
Whole body vibration measurements
Measurement of human vibration exposure in buildings by ISO 2631-1, BS 6472, and DIN 4150-2
The station allows simultaneous measurement of vibration acceleration, allowing the measurement of VDV with a different recording step than PPV, making the reporting much easier. The analyzer has built-in weighing filters according to ISO 2631-1 and ISO 2631-2 as well as DIN 4150-2. It is also possible to measure the impact of vibration exposure using a 1/3 octave spectrum.
Portable monitoring system
A waterproof case dedicated to outdoor measurements
Military standard connectors provide reliable, robust, and waterproof cable connections. The station is ready for direct connection of a solar panel and can be powered by an internal battery or an outdoor DC power supply. The power is managed by the intelligent charging unit. The low-noise, hermetically sealed tri-axial piezoelectric accelerometer enables outdoor use without additional enclosures.
Applications
Building and ground vibrations
Vibration velocity and acceleration
SV 258 PRO measures triaxial velocity and acceleration vibration levels in parallel and calculates peak particle velocity and vibration dose value simultaneously. In addition to logging overall values and frequency spectra, the time domain signal is stored for post-processing purposes. SvanNET enables a plug-and-play connection to the Internet and easy management of measurement projects. Regardless of the SIM card type, and public or private IP numbers, SvanNET will establish a connection, giving full access to the measurement data via WEB BROWSER. FFT is used for dominant frequency determination according to BS and DIN standards. Alternatively, the RMS or PEAK velocity spectrum in 1/3 octave bands can be used for comparison with user curves.
Specs :
SVAN 958AG VIBRATION AND NOISE LEVEL METER & ANALYSER
Vibration Standards DIN 4150-3, DIN 4150-2, BS 7385-2, 22/09/1994, 23/07/1986, IN-1226, USER FFT, USER 1/3 OCTAVE
Noise Standards Class 1: IEC 61672-1:2002
Vibration Level Meter Mode PPV, DF, RMS, VDV, MAX, Peak, Peak-Peak, Vector, aw, awv
Sound Level Meter Mode SPL, Leq, SEL, Lden, Ltm3, Ltm5, Statistics – Ln (L1-L99), LMax, LMin, LPeak
Vibration Profiles Per Channel 2: velocity and accleration
Vibration Analyser 1/3 octave real-time analysis or FFT analysis
Time domain signal recording to WAV format
Filters In Velocity Profile DIN 80, DIN 315, VEL1
Filters In Acceleration Profile HP1, HP3, HP10, Wk, Wd, Wc, Wj, Wm, Wg, Wb
RMS & RMQ Detectors Digital true RMS & RMQ detectors with Peak detection, resolution 0.1 dB
Detector Time Constants Fast 125ms in accordance to DIN 4150-2
Accelerometer SV 84 triaxial high sensitivity (1 V/g),
noise floor RMS: 14 μm/s (VEL1), 2 μm/s (VEL3)
Vibration Measurement Range SV 84: 0.0005 ms2 RMS ÷ 50 ms-2 PEAK (accelerometer dependent)
Vibration Frequency Range SV 84: 0.2 Hz ÷ 315 Hz (accelerometer dependent) period
Ingress Protection Rating IP 65
Communication Interfaces USB, 3G modem
Power supply DC power supply / charger 11 V ÷ 30 V (waterproof)
Operation time on battery 17 Ah / 12 V
Modem on up to 3 days
Modem off up to 7 days
Solar Panel (not included) MPPT voltage 17.0 V ÷ 20.0 V
External DC source (not included) voltage range 10.5 V – 24 V
Environmental Conditions Temperature from -10oC to 50 oC
Dimensions 420 x 340 x 210 mm
Weight Approx. 9 kg with batteries
Kit includes:
SM 258 Pro Outdoor monitoring station for SVAN 958A including 17Ah battery, SP 270 3G modem
SB 270 waterproof power supply
SC 278 Cable for SV 207B (SV 84) and SV 258
SV 207B Building vibration accelerometer and mounting adapter
SA 251 Carying case for accelerometer and accessories
SvanNet Web interface and connectivity support
Also you can check product : NEW Svantek SVAN 958A Four Channels Sound - Vibration Meter and Analyzer
- Availability: 18 In Stock
- Model: Svantek SV 258 PRO
-
Brand:
