NEW Adash A4900 Vibrio M Ex Vibration Meter, Analyzer and Data Collector
Vibrio M Ex instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and lubrication assessment. The A4900 – Vibrio M Ex is equipped with 4 MB of memory for data storage. Data memory allows you to perform off-route and route measurements. The professional software DDS for Vibrio M Ex can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included. The A4900 – Vibrio M Ex is supplied as a complete system including quality piezoelectric sensor, magnet and coiled cable for industrial use.
$2,095.00
The Vibrio M is now also avaliable in an Ex version. All basic vibrodiagnostics measurements are
available: Overall Values, FFT Spectrum, Time signal, Frequency bands, Route measurement or Expert system. You can listen to the signal with the headphones supplied with every unit.
The Vibrio M Ex comunicates with the DDS software, which you can download for free from the Adash website.
Vibrio M Ex instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and lubrication assessment. The A4900 – Vibrio M Ex is equipped with 4 MB of memory for data storage. Data memory allows you to perform off-route and route measurements. The professional software DDS for Vibrio M Ex can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included. The A4900 – Vibrio M Ex is supplied as a complete system including quality piezoelectric sensor, magnet and coiled cable for industrial use.
Vibrio M Ex Specifications
Input:
1 x ICP® powered accelerometer
Input range:
60 g PEAK with standard 100 mV/g sensor
e.g. 600 g PEAK with 10 mV/g sensor (sensitivity is adjustable in the device)
Measurements:
Velocity RMS: 10 - 1 000 Hz [mm/s, ips]
Velocity Peak: 10 - 1 000 Hz [mm/s, ips]
Acceleration RMS: 500 - 16 kHz [g]
Acceleration Peak: 500 - 16 kHz [g]
Velocity time: 1 - 1 000 Hz [mm/s, ips], 2048 samples
Velocity spectrum: 1 - 1 000 Hz [mm/s, ips], 800 lines
Acceleration time: 1 - 16 kHz [g], 2048 samples*
Acceleration spectrum: 1 - 16 kHz [g], 800 lines*
Acceleration Demod-Envelope RMS: 500 - 16 kHz [g]
Acceleration Demod-Envelope Peak: 500 - 16 kHz [g]*
Acceleration Demod-Envelope time: 500 - 16 kHz [g], 2048 samples
Acceleration Demod-Envelope spectrum: 500 - 16 kHz [g], 800 lines, range 400 Hz*
Displacement RMS: 2 - 100 Hz [µm, mil]
Displacement 0-Peak: 2 - 100 Hz [µm, mil]
Displacement Peak-Peak: 2 - 100 Hz [µm, mil]
Other functions:
Stethoscope for listening machine (bearing) noises
Memory:
4 MB for data:
120960 overall values
or 900 measurements of 800 line spectra
or 2048 sample time signals
Data storing:
Off-Route Route with DDS software (free download)
Interface:
USB 3.0, 2.0 compatible
Software:
Free version of DDS software (limited database size)
Display:
Colour graphic OLED display 128x128 pixels,
diagonal 1.5“ (38 mm)
Output:
1 x AC signal 8 Ω / 0,5 W for external headphones
(signal listening)
Power:
2 x AA 1.5V batteries
(alkaline, NiMH, Lithium - 8 hours of operation)
Temperature:
Operating: -5°C to 55°C
Dimensions:
150 x 60 x 35 mm
Weight:
330 g including batteries (without cable, sensor and magnet)
540 g including batteries, cable, sensor and magnet
Ex certification:
[II] Non-mining
[2] Zone 1
[G] Gas atmosphere
[Ex ib] Principle of protection: Intrinsic Safety EN 60079-11
[IIC] Gas group - Acetylene, Hydrogen
[T4] Temperature class 135°C
[Gb] Equipment Protection Level – Zone 1 (high protection)
Accessories :
vibration sensor
coiled cable to connect vibration sensor
magnetic base for vibration sensor
headphones with 3.5 mm jack
USB cable
measuring tip for manual pressure on the sensor
transport case
USB flash drive with the manual
Also you can check product : NEW Adash A4300 VA3 Pro 3-Channel Vibration Analyzer, Data Collector
available: Overall Values, FFT Spectrum, Time signal, Frequency bands, Route measurement or Expert system. You can listen to the signal with the headphones supplied with every unit.
The Vibrio M Ex comunicates with the DDS software, which you can download for free from the Adash website.
Vibrio M Ex instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and lubrication assessment. The A4900 – Vibrio M Ex is equipped with 4 MB of memory for data storage. Data memory allows you to perform off-route and route measurements. The professional software DDS for Vibrio M Ex can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included. The A4900 – Vibrio M Ex is supplied as a complete system including quality piezoelectric sensor, magnet and coiled cable for industrial use.
Vibrio M Ex Specifications
Input:
1 x ICP® powered accelerometer
Input range:
60 g PEAK with standard 100 mV/g sensor
e.g. 600 g PEAK with 10 mV/g sensor (sensitivity is adjustable in the device)
Measurements:
Velocity RMS: 10 - 1 000 Hz [mm/s, ips]
Velocity Peak: 10 - 1 000 Hz [mm/s, ips]
Acceleration RMS: 500 - 16 kHz [g]
Acceleration Peak: 500 - 16 kHz [g]
Velocity time: 1 - 1 000 Hz [mm/s, ips], 2048 samples
Velocity spectrum: 1 - 1 000 Hz [mm/s, ips], 800 lines
Acceleration time: 1 - 16 kHz [g], 2048 samples*
Acceleration spectrum: 1 - 16 kHz [g], 800 lines*
Acceleration Demod-Envelope RMS: 500 - 16 kHz [g]
Acceleration Demod-Envelope Peak: 500 - 16 kHz [g]*
Acceleration Demod-Envelope time: 500 - 16 kHz [g], 2048 samples
Acceleration Demod-Envelope spectrum: 500 - 16 kHz [g], 800 lines, range 400 Hz*
Displacement RMS: 2 - 100 Hz [µm, mil]
Displacement 0-Peak: 2 - 100 Hz [µm, mil]
Displacement Peak-Peak: 2 - 100 Hz [µm, mil]
Other functions:
Stethoscope for listening machine (bearing) noises
Memory:
4 MB for data:
120960 overall values
or 900 measurements of 800 line spectra
or 2048 sample time signals
Data storing:
Off-Route Route with DDS software (free download)
Interface:
USB 3.0, 2.0 compatible
Software:
Free version of DDS software (limited database size)
Display:
Colour graphic OLED display 128x128 pixels,
diagonal 1.5“ (38 mm)
Output:
1 x AC signal 8 Ω / 0,5 W for external headphones
(signal listening)
Power:
2 x AA 1.5V batteries
(alkaline, NiMH, Lithium - 8 hours of operation)
Temperature:
Operating: -5°C to 55°C
Dimensions:
150 x 60 x 35 mm
Weight:
330 g including batteries (without cable, sensor and magnet)
540 g including batteries, cable, sensor and magnet
Ex certification:
[II] Non-mining
[2] Zone 1
[G] Gas atmosphere
[Ex ib] Principle of protection: Intrinsic Safety EN 60079-11
[IIC] Gas group - Acetylene, Hydrogen
[T4] Temperature class 135°C
[Gb] Equipment Protection Level – Zone 1 (high protection)
Accessories :
vibration sensor
coiled cable to connect vibration sensor
magnetic base for vibration sensor
headphones with 3.5 mm jack
USB cable
measuring tip for manual pressure on the sensor
transport case
USB flash drive with the manual
Also you can check product : NEW Adash A4300 VA3 Pro 3-Channel Vibration Analyzer, Data Collector
- Availability: 16 In Stock
- Model: A4900 Vibrio M EX
-
Brand:
