NEW VMI Viber X3 Portable Vibration Analyzer
Developed for vibration analysts, machine operators, and maintenance technicians. Easy to use, powerful for basic condition monitoring. Helps in maintaining machine reliability and verifying machinery repair. Store and trend condition data with Trend View.
$1,190.00
VMI VIBER X3
Features
Real-time measurement of total vibration level and the bearing condition (BC), shown simultaneously
Largest amplitude peak frequency in CPM or Hz in main screen display
Fault analysis screen displaying the five highest peaks with amplitude and frequency one by one
Headphone set with volume control and high pass filter for bearing noise detection
Listening to a machine sounds (through the provided headphones) makes it possible for the user to listen to the machine while at the same time seeing the vibrations in the instrument display
Measurement units and measurement presentation may be selected from the following:
g (RMS, Peak or Peak-Peak)
mm/sec (RMS, Peak or Peak-Peak)
µm (RMS Peak or Peak-Peak)
inch/sec (RMS, Peak or Peak-Peak)
mils (RMS, Peak or Peak-Peak)
Large dynamic vibration range up to 1.76 oz (50 g)
Bearing Condition measurements in a wide frequency range (0.5 to 30 kHz)
Built-in infrared temperature sensor, select between °C or °F
Display with backlight; bar indicator shows measurement stability
Clear vibration, temperature and danger alarms by red and yellow colour LED's
Dust and waterproof, for rough use (IP 65)
Trend View Software
Easy to use, intuitive software
- Build machine and measuring points
- Collect data
- Trend measurements
- Determine machine problem
- Take corrective action
- Increase machinery uptime
Specifications
Input Amplitude Range Vibration: 1.76 oz (50g) RMS with other sensor up to 17.64 oz (500 g)
Bearing condition: Max 5 gBC
Dynamic Range 80 dB (159 Hz with auto ranging)
Frequency Range Vibration: 2 to 400 Hz, 10 to 1000 Hz, 6 to 1600 Hz, 11 to 3200 Hz
Bearing condition: 0.5 to 16 kHz
Vibration Units g-value, m/s², mm/s, in/s, µm, mils
Amplitude Presentation RMS, Peak, Peak-Peak
Frequency Range Same as "frequency range", except for 11-3200 Hz range, where peak detection ends at 2000 Hz
Storage Capacity 100 measurements can be stored
Three-point Balancing 10 balancing results can be stored
Interface USB 2.0
Sound Frequency 60 Hz to 10 kHz 26 dB to -4.1 dB
500 Hz to 10 kHz 26 dB to -4.1 dB
Temperature Range -4 to 248°F (-20 to 120°C)
Accuracy Vibration: ±3% f.s. is 50g for acceleration other units are frequency dependent
Bearing condition: ±5% over 0.5 gBC
Frequency/RPM: ±0.2%
Temperature: Emissivity factor must be set in accordance with the target surface
Display B&W LCD 64 x 120 pixels with background light
Power Supply Rechargeable lithium battery, 2300 mA/h
Dimensions 6.5 x 3.15 x 1.97" (165 x 80 x 50 mm)
Weight 14.64 oz (415 g)
Includes:
IP68 Case
Instrument
Transducer
Headphones
Extention tip
Charger
Rechargeable batteries
Cable for data transmission
Also you can check product : NEW VMI VIBER X5 MK III Advanced Vibration Analyzer
Features
Real-time measurement of total vibration level and the bearing condition (BC), shown simultaneously
Largest amplitude peak frequency in CPM or Hz in main screen display
Fault analysis screen displaying the five highest peaks with amplitude and frequency one by one
Headphone set with volume control and high pass filter for bearing noise detection
Listening to a machine sounds (through the provided headphones) makes it possible for the user to listen to the machine while at the same time seeing the vibrations in the instrument display
Measurement units and measurement presentation may be selected from the following:
g (RMS, Peak or Peak-Peak)
mm/sec (RMS, Peak or Peak-Peak)
µm (RMS Peak or Peak-Peak)
inch/sec (RMS, Peak or Peak-Peak)
mils (RMS, Peak or Peak-Peak)
Large dynamic vibration range up to 1.76 oz (50 g)
Bearing Condition measurements in a wide frequency range (0.5 to 30 kHz)
Built-in infrared temperature sensor, select between °C or °F
Display with backlight; bar indicator shows measurement stability
Clear vibration, temperature and danger alarms by red and yellow colour LED's
Dust and waterproof, for rough use (IP 65)
Trend View Software
Easy to use, intuitive software
- Build machine and measuring points
- Collect data
- Trend measurements
- Determine machine problem
- Take corrective action
- Increase machinery uptime
Specifications
Input Amplitude Range Vibration: 1.76 oz (50g) RMS with other sensor up to 17.64 oz (500 g)
Bearing condition: Max 5 gBC
Dynamic Range 80 dB (159 Hz with auto ranging)
Frequency Range Vibration: 2 to 400 Hz, 10 to 1000 Hz, 6 to 1600 Hz, 11 to 3200 Hz
Bearing condition: 0.5 to 16 kHz
Vibration Units g-value, m/s², mm/s, in/s, µm, mils
Amplitude Presentation RMS, Peak, Peak-Peak
Frequency Range Same as "frequency range", except for 11-3200 Hz range, where peak detection ends at 2000 Hz
Storage Capacity 100 measurements can be stored
Three-point Balancing 10 balancing results can be stored
Interface USB 2.0
Sound Frequency 60 Hz to 10 kHz 26 dB to -4.1 dB
500 Hz to 10 kHz 26 dB to -4.1 dB
Temperature Range -4 to 248°F (-20 to 120°C)
Accuracy Vibration: ±3% f.s. is 50g for acceleration other units are frequency dependent
Bearing condition: ±5% over 0.5 gBC
Frequency/RPM: ±0.2%
Temperature: Emissivity factor must be set in accordance with the target surface
Display B&W LCD 64 x 120 pixels with background light
Power Supply Rechargeable lithium battery, 2300 mA/h
Dimensions 6.5 x 3.15 x 1.97" (165 x 80 x 50 mm)
Weight 14.64 oz (415 g)
Includes:
IP68 Case
Instrument
Transducer
Headphones
Extention tip
Charger
Rechargeable batteries
Cable for data transmission
Also you can check product : NEW VMI VIBER X5 MK III Advanced Vibration Analyzer
- Availability: 11 In Stock
- Model: Viber X3
-
Brand:
