EXFO

The FTB-4 Pro delivers all the power of a high-end platform in a go-where-you-need field-testing tool. Combines SONET/SDH, OTN, Ethernet and Fibre Channel analysis, as well as an optical spectrum analyzer (OSA) with built-in polarization controller. OTDR/iOLM testing combined with fiber endface inspection and optical power measurement for fiber characterization and troubleshooting of any network, including access, LAN/WAN, data center, FTTx, metro,long-haul and ultra-long-haul.

APPLICATIONS

ROADM and PTN turn-up testing
Combines SONET/SDH, OTN, Ethernet and Fibre Channel analysis, as well as an optical spectrum analyzer (OSA) with built-in polarization controller.

Gigabit/10 Gigabit Ethernet configurations
Gigabit Ethernet analyzer, OTDR and optical spectrum analyzer with polarization controller.

Fibre Channel
Fibre Channel is the protocol for the communication structure dedicated to carrying different types of traffic for applications that require first rate capabilities of storage and technologies.

ROADM commissioning
Insert an OSA within this compact, portable solution for fast and accurate DWDM commissioning and turn up of high-speed networks up to 100/200/400 Gbit/s.

Multiservice testing
Easily turn up, validate and troubleshoot DSn/PDH, SONET/SDH and Ethernet services up to 10 Gbit/s in converged optical networks. Delivering IPTV test capabilities and transmission control protocol (TCP) throughput assessment.

Fiber characterization and troubleshooting
OTDR/iOLM testing combined with fiber endface inspection and optical power measurement for fiber characterization and troubleshooting of any network, including access, LAN/WAN, data center, FTTx, metro, long-haul and ultra-long-haul.

FTTH testing
With a dynamic range of up to 42 dB and enabling power meter and visual fault locator functionalities, the PON FTTx/MDU OTDR module allows fiber installers to seamlessly characterize splitters in PON FTTx and multiple dwelling unit (MDU) applications.

Ethernet testing from 10 Mbit/s to 100 Gbit/s
100% line-rate testing of IP traffic at up to 100G; RFC 2544 and ITU-T Y.1564 Ethernet service activation with full statistics, and packet capture, traffic filtering, ping and traceroute with clear pass/fail verdicts. CWDM turn-up testing Integrate CWDM OTDR to test through CWDM-based MUX/DEMUX at
ITU-recommended wavelengths.

DWDM testing
Highly accurate and reliable DWDM network commissioning, troubleshooting and channel analysis. 

400 Gbit/s testing applications
Advanced future-proof hardware, ready for today’s and tomorrow’s 400 Gbit/s applications.

Distributed PMD analysis
Single-ended, span-by-span measurement of PMD, enabling targeted fiber upgrades and cost-effective deployment of transmission speeds at 10, 40 and 100 Gbit/s.

OPTICAL TEST MODULES
Optical spectrum analyzer
FTBx-5235
FTBx-5243-HWA
FTBx-5245
FTBx-5255

OTDR
FTB-7400E
FTB-7600E
FTBx-720C
FTBx-730C
FTBx-735C
FTBx-750C

OTDR CWDM/DWDM 
FTB-7400E
FTBx-740C

OLTS
FTBx-940
FTBx-945

Single-ended dispersion analyzer
FTB-5700

Chromatic dispersion (CD)
FTB-5800

Polarization mode dispersion (PMD)
FTB-5500B

Distributed PMD analyzer
FTB-5600

TRANSPORT AND DATACOM TEST MODULES

400G multiservice
FTBx-88460

1G-to-100G testing
FTBx-88260

Advanced 100G multiservice
FTBx-88200NGE

Versatile 10G multiservice
FTBx-8870
FTBx-8880

OPTICAL PLUG-AND-PLAY OPTIONS
The platform can host optical plug-and-play options that can be purchased whenever you need them, at the time of your order or later on. In either case, installation is a snap. You can do it by yourself. No software update required.

Optical power meter
A high-level power meter (GeX) that can measure up to 27 dBm, the highest in the industry. This is essential for HFC networks or
high-power signals. If used with an auto-lambda/auto-switching compatible light source, the power meter automatically syncs on
the same wavelength, avoiding any risk of mismatched measurement.
- Extensive range of connectors
- Auto-lambda and Auto-switching
- Offers measurement storage and reporting
- Choice of seven standard or CWDM calibrated wavelengths

Visual fault locator (VFL)
The plug-and-play VFL easily identifies breaks, bends, faulty connectors and splices, in addition to other causes of signal loss.
Basic yet essential, this troubleshooting device should be part of every field technician’s toolbox. Visually locating faults by creating
a bright-red glow at the exact location of the fault on singlemode or multimode fibers, the VFL detects faults over distances of up to 5 km.

TECHNICAL SPECIFICATIONS :

Mainframe
Quad-core processor / 4 GB RAM / Windows 10

Display
Touchscreen, color, 1280 × 800 TFT 256 mm (10.1 in)

Interfaces
RJ45 LAN 10/100/1000 Mbit/s
USB 2.0 ports (2)
USB 3.0 port (1)
Display port
3.5 mm headset/microphone port

Storage (internal flash memory)
128 GB

Battery (included)
Two rechargeable Li-ion smart batteries (optional)

Power supply
AC input: 100 – 240 V; 50/60 Hz; 5.2 – 1.9 A

GENERAL SPECIFICATIONS

Size (H x W x D)
199 mm × 333 mm × 170 mm (7 13/16 in × 13 1/8 in × 6 11/16 in)

Weight
4.6 kg (10 lb)

Temperature Operating Storage
0 °C to 40 °C (32 °F to 104 °F)
–40 °C to 60 °C (–40 °F to 140 °F)

BUILT-IN POWER METER SPECIFICATIONS (GeX) (optional)

Calibrated wavelengths (nm)
850, 1300, 1310, 1490, 1550, 1625, 1650

Optional CWDM calibrated wavelengths (nm)
1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490,
1510, 1530, 1550, 1570, 1590, 1610, 1383, 1625

Power range (dBm)
27 to –50

Uncertainty (%)
f ±5 % ± 10 nW

Display resolution (dB)
0.01 = max to —40 dBm
0.1 = —40 dBm to —50 dBm

VISUAL FAULT LOCATOR (VFL) (optional)

Laser650 nm ± 10 nm
CW/Modulate 1 Hz
Typical Pout in 62.5/125 µm: > –1.5 dBm (0.7 mW)
Laser safety: Class 2

Also you can check product : USED EXFO FTB-1 Pro High Power Dual-Carrier Platform With FTBx-88801 (800G module)

The FTB-2 Pro is the most compact solution on the market for multirate, multitechnology, multiservice testing, delivering all the power of a high-end platform in a conveniently sized, go-anywhere field-testing tool.

Nowadays, with the complexity and extent of modern networks, technicians need more than a few tools in their belt to get the job done right the first time. They need OSAs, Ethernet multiservice modules and OTDRs with fiber inspection probes. You name it, the technician needs it. But what makes the supertech “super” is the ability to drill down effortlessly and perform all tests quickly and accurately, cutting costs and saving time. That’s the added value, and that’s one of the many advantages that the FTB-2-Pro brings to the table.

The FTB-2 Pro is by far the smallest, most compact high speed multitechnology test platform out there. The FTB-2 Pro offers the most versatility: This is your go-anywhere, test-anything platform.

Designed for applications such as:

Fiber characterization
Gigabit/10G Ethernet configurations
ROADM commissioning
Multiservice transport testing
100G testing

Key features

Connect anywhere: USB, mobile, Wi-Fi, VPN and Bluetooth

Loaded with utilities: all the tools required to maximize field testing, and any third-party application

Like a PC: available with a dual- or quad-core processor and Windows-based operating system

EXFO Connect-compatible: automated asset management—data goes through the cloud and into a dynamic database.

Applications
CWDM turn-up testing
Fiber characterization
ROADM commissioning
FTTx testing
Gigabit/10G Ethernet configurations

Technical Specs :

Mainframe
Quad-core processor / 4 GB RAM / Windows 10

Display
Touchscreen, color, 1280 × 800 TFT 256 mm (10.1 in)

Interfaces
RJ45 LAN 10/100/1000 Mbit/s
USB 2.0 ports (2)
USB 3.0 port (1)
Display port
Headset jack

Storage (internal flash memory)
128 GB

Battery
Two rechargeable Li-ion smart batteries

Power supply
AC/DC adapter, input: 100 – 240 V; 50/60 Hz;
4.0 A max, output: 24 V; 8.33 A

GENERAL SPECIFICATIONS

Size(H x W x D)
199 mm × 333 mm × 119 mm (7 13/16 in × 13 1/8 in × 4 11/16 in)

Weight
3 kg (6.6 lb)

Temperature Operating Storage
0 °C to 50 °C (32 °F to 122 °F)

–40 °C to 60 °C (–40 °F to 140 °F)

Relative humidity
≤95 % non-condensing

BUILT-IN POWER METER SPECIFICATIONS (GeX) (optional) d
Calibrated wavelengths
(nm) 850, 1300, 1310, 1490, 1550, 1625, 1650

Optional CWDM calibrated wavelengths (nm)
1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490,
1510, 1530, 1550, 1570, 1590, 1610, 1383, 1625

Power range (dBm)
27 to –50

Uncertainty (%)
±5 % ± 10 nW

Display resolution (dB)
0.01 = max to —40 dBm
0.1 = —40 dBm to —50 dBm

VISUAL FAULT LOCATOR (VFL) (OPTIONAL)
Laser, 650 nm ± 10 nm
CW/Modulate 1 Hz
Typical Pout in 62.5/125 µm: >–1.5 dBm (0.7 mW)

Included:

EXFO FTB-2 PRO Base Mainframe
2-slot capacity PRO Modular mainframe
Windows 10 OS, QUAD Core CPU
Touchscreen, color, 1280 x 800 TFT, 256 mm (10.1 in)
RAM: 4 GB
RF: Built-in WiFi & Bluetooth
64G: 64GB Internal Flash Storage
GP-2123: 200W, AC Adapter with power cord
EXFO FTBx-88200NGE 100G PowerBlazer Test Module
Spare Slots
Quick Start Guide
Power Cable
Calibration Certificates
EXFO Hard Carrying Case

Also you can check product : USED EXFO FTB-1 Pro High Power Dual-Carrier Platform With FTBx-88801 (800G module)

The FTB-2 Pro is the most compact solution on the market for multirate, multitechnology, multiservice testing, delivering all the power of a high-end platform in a conveniently sized, go-anywhere field-testing tool.

Nowadays, with the complexity and extent of modern networks, technicians need more than a few tools in their belt to get the job done right the first time. They need OSAs, Ethernet multiservice modules and OTDRs with fiber inspection probes. You name it, the technician needs it. But what makes the supertech “super” is the ability to drill down effortlessly and perform all tests quickly and accurately, cutting costs and saving time. That’s the added value, and that’s one of the many advantages that the FTB-2-Pro brings to the table.

The FTB-2 Pro is by far the smallest, most compact high speed multitechnology test platform out there. The FTB-2 Pro offers the most versatility: This is your go-anywhere, test-anything platform.

Designed for applications such as:

Fiber characterization
Gigabit/10G Ethernet configurations
ROADM commissioning
Multiservice transport testing
100G testing

Key features

Connect anywhere: USB, mobile, Wi-Fi, VPN and Bluetooth

Loaded with utilities: all the tools required to maximize field testing, and any third-party application

Like a PC: available with a dual- or quad-core processor and Windows-based operating system

EXFO Connect-compatible: automated asset management—data goes through the cloud and into a dynamic database.

Applications

CWDM turn-up testing
Fiber characterization
ROADM commissioning
FTTx testing
Gigabit/10G Ethernet configurations

Technical Specs :

Mainframe
Quad-core processor / 4 GB RAM / Windows 10

Display
Touchscreen, color, 1280 × 800 TFT 256 mm (10.1 in)

Interfaces
RJ45 LAN 10/100/1000 Mbit/s
USB 2.0 ports (2)
USB 3.0 port (1)
Display port
Headset jack

Storage (internal flash memory)
128 GB

Battery
Two rechargeable Li-ion smart batteries

Power supply
AC/DC adapter, input: 100 – 240 V; 50/60 Hz;
4.0 A max, output: 24 V; 8.33 A

GENERAL SPECIFICATIONS

Size(H x W x D)
199 mm × 333 mm × 119 mm (7 13/16 in × 13 1/8 in × 4 11/16 in)

Weight
3 kg (6.6 lb)

Temperature Operating Storage
0 °C to 50 °C (32 °F to 122 °F)

–40 °C to 60 °C (–40 °F to 140 °F)

Relative humidity
≤95 % non-condensing

BUILT-IN POWER METER SPECIFICATIONS (GeX) (optional) d
Calibrated wavelengths
(nm) 850, 1300, 1310, 1490, 1550, 1625, 1650

Optional CWDM calibrated wavelengths (nm)
1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490,
1510, 1530, 1550, 1570, 1590, 1610, 1383, 1625

Power range (dBm)
27 to –50

Uncertainty (%)
±5 % ± 10 nW

Display resolution (dB)
0.01 = max to —40 dBm
0.1 = —40 dBm to —50 dBm

VISUAL FAULT LOCATOR (VFL) (OPTIONAL)
Laser, 650 nm ± 10 nm
CW/Modulate 1 Hz
Typical Pout in 62.5/125 µm: >–1.5 dBm (0.7 mW)

Included:

EXFO FTB-2 PRO Base Mainframe
2-slot capacity PRO Modular mainframe
Windows 10 OS, QUAD Core CPU
Touchscreen, color, 1280 x 800 TFT, 256 mm (10.1 in)
RAM: 4 GB
RF: Built-in WiFi & Bluetooth
64G: 64GB Internal Flash Storage
GP-2123: 200W, AC Adapter with power cord
EXFO FTBx-88200NGE 100G PowerBlazer Test Module
Spare Slots
Quick Start Guide
Power Cable
Calibration Certificates
EXFO Hard Carrying Case

Also you can check product : NEW EXFO FTB-4 Pro Test Platform With FTBx-88200NGE-ROADM-OSA-OTDR

Connected anywhere, anytime

The value of connectivity resides in the ability to connect your platform anywhere, at any time. That's why our platforms are equipped with technology that features unprecedented flexibility. Whether you need to transfer data to the cloud or interface with a smart device, you’ll have the ability to make the connection you need to get the job done.

Adapted for dedicated applications. Dedicated to helping you adapt.

The FTB-1 Pro model is a light-weight compact test platform allowing field technicians to carry out dedicated optical, Ethernet, multiservice and radio frequency (RF) interference test applications simply and efficiently, thanks to its ultra-powerful processing and highly intuitive interface.

Uncompromising multitouch performance
In today's connected world, the screen has become an intelligent tool to ensure seamless user experience: displaying data in high-resolution images and color, and above all, touch-sensitive. At EXFO, we have 30 years of industry-acclaimed expertise in making test sets that are the most adapted to your needs and requirements in the field. With the FTB-1 Pro, we are proud to bring you a state-of-the-art and easy-to-use interface, with multitouch capability on supported applications. It’s true power at your fingertips!

Key Features

Connects anywhere: USB, mobile, WiFi, VPN and Bluetooth
Loaded with utilities: all the tools required to maximize field testing, plus any third-party applications
Like a PC: available with dual- or quad-core processor and Windows operating system
EXFO Connect-compatible: automated asset management; data goes through the cloud and into a dynamic database
Single- or dual-carrier configuration available to slot compatible FTBx test modules.
High-power two-slot carrier configuration enabling simultaneous 100G quad port testing

Applications

Fiber characterization

FTTH testing

Access fiber networks

Multiservice testing up to 10 Gbit/s

Gigabit/10 Gigabit Ethernet configurations

Wireless fronthaul and backhaul testing

RF spectrum analysis over CPRI

Do more

The Windows operating system allows for a wide choice of third-party applications and supports an extensive range of USB devices.

Start faster, multitask
Use any Office suite
Connect to printers, cameras, keyboards, mice, and more
Bring your own apps

Share your desktop (e.g., using TeamViewer)
Antivirus software
Communicate via email services
Record and automate actions
Share files via cloud-based storage

TECHNICAL SPECIFICATIONS :

Mainframe
Quad-core processor / 8 GB RAM

Operating system
Windows 10 IoT Enterprise LTSC 2021

Display
Touchscreen, color, 1280 × 800 TFT 203 mm (8 in)

Interfaces
RJ45 LAN 10/100/1000 Mbit/s
USB 2.0 ports (2)
USB 3.0 port (1)
Micro SD card slot
3.5 mm headset/microphone port

Storage (internal flash memory)
128 GB

Battery
Rechargeable Li-ion smart battery
(Two batteries with the high-power dual carrier)

Power supply
With high-power dual carrier
AC/DC adapter, input: 100 – 240 V; 50/60 Hz; 2.5 A max, output: 24 V; 3.75 A
AC/DC adapter, input: 100 – 240 V; 50/60 Hz; 5.0 A max, output: 24 V; 13.75 A

GENERAL SPECIFICATIONS
Size (H × W × D)

With high-power dual carrier
210 mm × 254 mm × 122 mm (8 ¼ in × 10 in × 4 ¾ in)

Weight (with battery
With high-power dual carrier
3.2 kg (7.1 lb)

Temperature Operating Storage
0 °C to 50 °C (32 °F to 122 °F)
–40 °C to 70 °C (–40 °F to 158 °F)

Relative humidity
0 % to 95 % non-condensing

BUILT-IN POWER METER SPECIFICATIONS (GeX) (optional)

Calibrated wavelengths (nm)
850, 1300, 1310, 1490, 1550, 1625, 1650

Optional CWDM calibrated wavelengths (nm)
1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490,
1510, 1530, 1550, 1570, 1590, 1610, 1383 and 1625

Power range (dBm)
Typical 27 to –50

Uncertainty
±5 % ± 10 nW

Display resolution (dB)
0.01 = max to –40 dBm
0.1 = –40 dBm to –50 dBm

VISUAL FAULT LOCATOR (VFL) (optional)
Laser, 650 nm ± 10 nm
CW/Modulate 1 Hz
Typical Pout in 62.5/125 µm: > –1.5 dBm (0.7 mW)
Laser safety: Class 2

In the Box :

1 x EXFO FTB-1 Pro V2 Multiservice Tester
1 x EXFO FTBx-730C-SM1-EA module
1 x EXFO FTBx-945-SM4-EA module
1 x AC Adapter/Charger
1 x Power Cord
1 x Carrying Case

Also you can check product : USED EXFO FTB-2 Pro Platform With FTBx-88200NGE , OSA , 100G Ethernet and OTDR