General Electric

GE Inspection USN 60 Ultrasonic Flaw Detector

GE Inspection Technologies has optimized its USN 60 series for use in direct sunlight and operation at extreme temperatures. These new characteristics make the instruments ideally suited for outdoor use with its increased long battery operation time.

The combination of the rugged USN durability, 11 hours of battery operation, fast rotary knob operation, outstanding ultrasonic performance, and the ﾓsquare wave pulserﾔ form a powerful portable ultrasonic inspection tool.

Optimized outdoor use design

Extreme temperature use (-20°C to 55°C /-4°F to 130°F)
Easy to view in direct sunlight
11 hours battery operation

Vibrant colors

Hi-resolution color LCD display produces ﾓAnalog Look and Performanceﾔ echo dynamics.
4 selectable vibrant display color schemes to match lighting conditions.
Gates and gate functions are color coded for easy identification and fast adjustment.

User Preferred Features

Simple operation with fast rotary knob adjustments; gain is always directly accessible with the left-hand rotary knob and lockable.
Auto CAL makes calibration fast & easy.
15 Hz to 6 kHz (spike mode) PRF and 15 Hz to 2 kHz (square mode) PRF (pulse repetition frequency)
2 independent gates monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications.
250 KHz to 25 MHz frequency range.
RF display mode enhances signal evaluation and bond inspection of dissimilar materials.
4 selectable damping settings (50, 75, 150, 500 ohms) for optimum probe performance.
1 mm to 28 m (0.040ﾔ to 1100ﾔ) range (in steel) covers thin to lengthy acoustically clean materials.
dB REF key evaluates subsequent echoes gain value and amplitude against the highest echo in Gate A (reference echo) when activated.
IF (Interface) Gate Option for automatic start of the display, Gate A, Gate B, and / or DAC / TCG for immersion testing applications.
VGA Output Option provides an easy way to connect to a PC monitor or PC projector for viewing by large audiences or training purposes.
RF Output Option outputs the raw RF waveform via a standard Lemo connector for further analysis.
BEA (Backwall Echo Attenuator) Option allows independent gain control of the region under Gate B for backwall echo monitoring.

Wide range of applications

A 6 kHz pulse repetition frequency, real-time analog and TTL outputs makes the USN 60 flaw detectors series ideal for a wide range of automated systems testing applications. The exclusive SmartView feature displays even the shortest echoes for critical scanning and rotating part inspections.

The quality, durability, dependability and ease of use that you have come to expect of Krautkramerﾒs popular USN Series of instruments remains. From rugged field inspections to high resolution thin measurements, long acoustically clean materials, and immersion systems, the USN 60 flaw detector family extends the range of applications that a portable instrument can perform. Furthermore the selectable 450V Square Wave Pulser satisfies a wide range of tough-to-penetrate applications, such as difficult to penetrate metallic  applications and especially non-metals inspection like composite materials.

Tools for easy weld inspection

Color Leg allows easy identification of leg and skip distances for weld inspection
GRID mode dynamically changes bands of display backgroundcolors for each leg.
A-SCAN mode dynamically changes the color for each leg of the ﾓliveﾔ A-Scan
Weld Rating Calculation simplifies the rating of weld indications according to AWS Specification D1.1. (Formula D = A ﾖ B ﾖ C).
Trigonometric flaw location function with curvature correction automatically calculates depth, surface distance, and sound path to flaw along with the leg of the inspection when using angle beam probes. All TOF measurements can be displayed in mm, inches or µs.
SmartView function along with variable persistence freeze modes displays the most important information (relevant shot) for a test.
Real time (single shot) analog and TTL outputs handle a wide range of automated systems applications.
Choose from Four Freeze Modes: ALL, Peak Std, Compare or Envelope for optimum waveform evaluation and comparison.
Three Variable Persistence Modes are selectable in Freeze Envelope to visually assist flaw detection & evaluation for scanning and moving part inspections.
Compare frozen reference wave-forms to live A-Scans in different colors to easily interpret test results.

Documentation and recording

Store & preview a minimum of 200 user-named data sets with A-Scans for quick recall and instrument setup.
UltraDOC 4 software program for bi-directional communication with a PC for easy storage of data sets with A-scan and documentation of test results.
UltraMATEﾙ software program simplifies the transfer, storage, analysis, and documentation of thickness data.
Reports with A-Scans are output directly to a variety of printers.

Specifications:

Range USN 60
0.040ﾔ to 1100ﾔ (1 mm to 28 m) at steel velocity; range selectable in fixed steps or continuously variable.

Material Velocity
Continuously adjustable from 0.0098 to 0.6299 inches/µs (250 to 16,000 m/s); 65 selectable material velocities

Display Delay
-20 to 3498 µs in steel (dependent on range)

Probe Delay/Zero Offset
0 to 999.9 µs

Damping
50, 75, 150, 500 ohms

Gain
0 to 110 dB adjustable in selectable steps 0.1, 0.5, 1.0, 2.0, 6.0, user definable, and locked

Test Modes
Pulse echo, dual, and thru-transmission

Pulser
Square wave excitation pulse

Pulse Voltage (Square wave pulser mode)
50 to 450 V scrollable in 10 V adjustments

Pulse Width (Square wave pulser mode)
Tunable from 50 to 1000 ns in 10 ns adjustments

Pulse Energy (Spike mode)
Low, High

Pulse Repetition Frequency USN 60
Autolow, autohigh, manually adjustable from 15 to 6000 Hz (spike mode) and 15 to 2000 Hz in square wave mode, in 5 Hz increments, external trigger (spike mode only)

Bandwidth (amplifier bandpass)
0.25 to 25 MHz with 10 selectable settings including broadband

Gate Monitors
Two independent flaw gates controllable over entire sweep range

Measurement Modes
Zero-to-first, multi-echo with selectable flank or peak detection

Rectification
Positive halfwave, negative halfwave, fullwave, RF

Reject (suppression)
0 to 80% linear

Units
Inch, millimeter, or microsecond selectable

Operating Temperature
-20° to 55°C (-4° to 130°F);
-25° to 70ºC (-13° to 158 º F ) storable

Languages
Selectable English, German, French, Spanish, Italian, Portuguese, Norwegian, Swedish, Finnish, Danish, Dutch, Russian, Czech, Romanian, Slovakian

Probe Connectors
BNC or Lemo

Keypad
International symbols

Battery Power
Lithium Ion battery pack; NiMH, NiCad or alkaline cells substitutable

Battery Life
11 hours on Li-Ion battery pack

Size
11.1ﾔ W x 6.75ﾔ H x 6.25ﾔ D (282 x 171 x 159 mm)

Display
640 x 480 pixels Color LCD 132.48 x 99.36 mm

Weight
6.6 lbs. (3.0 kg) Li-Ion battery;
3.5 lbs.(1.6 kg) without battery

Color Leg
Easy identification of leg and skip distances for angle beam inspection in A-scan or grid background colors

Weld Rating Calculation
Simplifies the rating of weld indications according to AWS specification D1.1, (formula D=A-B-C)

Dust Proof/DrippingWater Proof
As per IEC 529 specification for IP54 classification

Compliance
EMC/EMI: EN 55011:2007, EN 61000-6-2:2005 Ultrasound: EN 12668, ASTM E317

In The Box:

(1) Lithium-ion battery pack, 12 Ah, in battery lid
(1) Power supply/charger unit
(1) Protective screen foil
(1) Operating manual
(1) CD-ROM with application for firmware upgrade download
(1) Manufacturer’s certificate

Also you can check product : USED General Electric SpotChecker Weld Flaw Detector - Calibrated

Portable and Robust

SpotChecker weighs just 3.2 kg (7.05 lb), is battery operated and is sealed to IP65. It features hot swap battery exchange to ensure continuous operation. Battery charging can be done with batteries inside or outside of the instrument, using an external charger. Portability allows inspection to be carried out at the place of welding or on the production line, with no need to transport components to designated inspection stations. As a result, more inspections can be carried out within the same time frame, which means increased productivity.

Easy-to-Use

SpotChecker does not require intensive training but offers the advantage of an “expert” system for people less qualified in weld inspection. Its ergonomically designed operator interface features an 8.4” LCD touch screen, six programmable function keys and twin track balls, so that it can be operated simply and efficiently in the most restricted of testing locations. 

Connectivity

The flaw detector can be connected to external periphery devices such as mouse, keyboard and printer by USB. The instrument can also be connected to a PC wirelessly by WLAN or Bluetooth for data
up-and down-load.

A non-directional, user-friendly remote control, equipped with programmable functions, provides extended flexibility. Intelligent dialog probes, whose data is automatically recognized and loaded, ensure 100-percent documentation accuracy and increased test reliability in spot weld inspection.

SPECS SpotChecker

Enclosure

Storage Temperature
-20 to 60 °C (-4 to 140°F)

Operating Temperature
0 to 45 °C (32 to 113°F)

Dimensions
W 225 × H 314 × D 94 mm (W 8.85 x H 12.36 x D 3.7”)

Weight

Approx. 3.2 kg (7.05 lb) (Incl. Batteries)
Protection Rating
IP 65

Shock Resistance
According to EN 600 68-2-27

Vibration Resistance
According to IEC 600 68-2-6 Fc

Display
8.4” TFT, SVGA, Touchscreen

Control Devices
2 × Trackball with 2 Buttons Each, 6 Function Keys, Touchscreen

Connections

Probes
2 × LEMO 00 Triax

Power Supply Unit
1 × LEMO 0S, 4-pin Socket

Network
1 × RJ45

USB
4 × USB Type A Socket, 1 × USB Type B Socket

Optional
WLAN, Bluetooth

Power Supply

Operating Voltage
15 V DC

Power Consumption
Approx. 22 W

Batteries
2 × Lithium-Ion 10.8 V, 4.8 Ah

Operating Time
Approx. 4.0 h with 2 Batteries

Power Supply Unit
External Power Supply Unit 100 ... 230 V AC, Max. 70 W

Ultrasound

Pulser Type
Spike Pulse

Pulse Repetition Frequency (PRF)
Max. 1,000 Hz, No Continuous Pulse Sequence

Voltage
Max. 400 V

Initial Pulse Rise Time
< 15 ns

Damping
50 Ohm

Settings and Evaluation

Calibration Ranges
Min. 0 to 2.5 mm (0 to 0.1”) (steel); max. 0 to 9,700 mm (0 to 381”) (steel)

Sound Velocity Range
500 ... 15,000 m/s (0.02 ... 0.59 “/μs) Integrated, Editable Material Table

Pulse Shift
-10 to 1,500 mm (-0.39 to 50”) (steel)

Probe Delay
0 to 100 μs

Frequency Range
2 to 20 MHz (–3 dB)

Gain
110 dB, Adjustable in Steps of 0.5/1/2/6 dB

Rectification
Full-Wave

Monitor Gates
2 Independent Monitor Gates, Adjustable over the Entire Maximum Calibration Range;
Evaluation on the Basis of A-scan at Display Refresh Rate

Distance Measurement- Initial Pulse and Measurement Point in Gate A or B
- Measuring Points: Gate B – Gate A (Differential Measurement)

Measurement Resolution
Sound Path/Time of Flight: up to 12.6 mm: 0.01 mm; Otherwise 0.2 % of Display Width

Amplitude
0.5 % Screen Height or 0.2 dB

A-scan Digitization
1,024 × 1,024 Pixels

Display Freeze
Static A-scan Freeze, Dynamic A-scan Freeze (Freeze Box)

Echo Comparison
Simultaneous Display of the Currently Active Signal and a Stored A-scan

Dialog Languages
German, English, French, Spanish, Italian, Chinese, Japanese

Units
mm

Includes :

General Electric SpotChecker Weld Flaw Detector
General Electric G20MNX NDT Probe D3,6mm
General Electric Lemo Cable
Power Supply
Some Protective Membranes ( ES 12/01 ES 12/02 ), the packages are not full!
Manual
Disc for Application Software, there is no USB stick for license!
USB cable
Transportation case

Also you can check product : USED GE Inspection Technologies USN 60 Ultrasonic Flaw Detector - Calibrated

The GE Mentor EM portable eddy current instrument allows easy access to on-device workflow applications that efficiently guide the inspector while capturing electromagnetic (eddy current) inspection data. Real-time collaboration with remote experts allows fast and accurate indication confirmation. No more stacks of paperwork or questionable inspection calls, just easy and efficient nondestructive testing for weld, aerospace (including rotary) and general purpose inspections.

Features and Benefits

Customize on-device workflow applications
Easily readable touchscreen display that works while wearing gloves
Instantly connect with other experts
Base your next steps on real-time readings
Immediately access your service bulletins
Easily download software upgrades
Probes for all inspections

Mentor EM
More experience in every inspection.

Remotely collaborate with experts in real time. Introducing Mentor EM for eddy current weld inspection.

This powerful new technology makes eddy current weld inspections easier, more accurate, and faster. By allowing the workflows to be instantly accessible on the device, Mentor EM helps to ensure strict compliance with codes, guidelines, and standard practices.

Transforming Nondestructive Testing
- Portable eddy current testing instrument with industry-defining signal-to noise ratio
- Reduces need for paper and manuals
- Large, bright, high-definition touchscreen that can be used while wearing gloves
-No knobs, dials, or switches to mistakenly adjust during use
- Superior IP rating and rugged cast magnesium housing to withstand harsh work environments
- Multiple alarm gates, which can be set to color or sound, to warn of possible defects

Specifications:

Mentor EM
More experience in every inspection.

Remotely collaborate with experts in real time. Introducing Mentor EM for eddy current weld inspection.

This powerful new technology makes eddy current weld inspections easier, more accurate, and faster. By allowing the workflows to be instantly accessible on the device, Mentor EM helps to ensure strict compliance with codes, guidelines, and standard practices.

Transforming Nondestructive Testing
• Portable eddy current testing instrument with industry-defining signal-to noise ratio
• Reduces need for paper and manuals
• Large, bright, high-definition touchscreen that can be used while wearing gloves
• No knobs, dials, or switches to mistakenly adjust during use
• Superior IP rating and rugged cast magnesium housing to withstand harsh work environments
• Multiple alarm gates, which can be set to color or sound, to warn of possible defects

Specifications:

Battery Size: 62 watt-hours/air transport compliant
Battery Life:
4 hours for most conditions
90-minute charge time
Extended battery pack adds 6 hours

Generators
2 generators and 2 connectors
2 time slices max per generator
4 frequency simultaneous injection

Display
10.4" XVGA 1024 x 768 Projected capacitive touch

Frequency Range
10 Hz–6 MHz

Sample Rate
(max) 50 kHz

Receiver Gain
0–34 dB

Gain
0–120 dB in 0.1 dB steps

Drive Voltage: 0.5, 1, 2, 4, 8, and 16 VPP

Gates Output
2 per channel

Alarm Outputs
2 total, TTL levels, one per input. One LED on instrument face, audio through Bluetooth (headset protocol)

Operating Temperature
-20 to 55°C

Storage
8 GB SSD

Connectivity
Wi-Fi; 6 Bluetooth channels

Dimensions
2.5 kg without modules; 295 mm x 230 mm x 60 mm2.9 kg with 2-probe connector module and connectivity module

Image Formats
BMP, JPG

Video Formats
MPEG 4, Type 10

Instantly Collaborate and Access Information
- Connect to local network to share data and collaborate remotely with experts in real time
- Immediately download the most up-to-date procedures and workflows 
- Bluetooth enabled

Mentor Create Software
- Tailor on-device inspection workflow applications for technicians of all levels
- Aid inspectors by placing photos, procedures, and videos on device for reference while setting up, acquiring data, or analyzing data
- Limit range of adjustments available to the operator; and therefore limit the opportunity to make errors
- Use in “Expert Mode” as well as “Workflow-on-Device” mode

Also you can check product : USED GE Inspection Krautkramer USM25 Lemo Ultrasonic Flaw Detector

The Instrument driver for USM 25 is required to exchange data and settings between the instrument USM 25 and the software AMPLECTOR Instrument Manager. All versions are supported USM 25, USM 25 DAC, USM 25 S, USM 25 SD and instrument options (DAC/TCG, DGS, Data Logger with 3rd gate). Instrument data supported by the Instrument driver USM 25: Instrument settings (ultrasonic parameters), A-scans, test results, and Data Recorder file types “Linear” and “Grid”.

Features

Straightforward display (as in Windows Explorer) of dataset files of the USM 25 in the AMPLECTOR Instrument Manager with detailed display of the most important instrument settings (ultrasonic parameters), A-scan and measurement values with extended information parameters
Straightforward display of Data Recorder files (as in Windows Explorer) with detailed display of Data Recorder type, statistics, as well as instrument settings and notes
Display of instrument information (for example software version)
Import and export of dataset files
The thickness alarm values (lower and upper threshold of the material thickness) can be subsequently set and changed in the AMPLECTOR Instrument Manager.

Requirements

Operating system Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10
Microsoft .NET Framework 4.5 or higher
Installed software AMPLECTOR Instrument Manager
Cable with RS-232-USB adapter for the connection between the instrument and the computer (not included in the standard package)

Tips for the operating and use

The RS232-USB adapter must be set to COM 3
The instrument must be set to data transfer rate of 38400 baud
The AMPLECTOR Instrument Manager and the instrument driver can only display and edit the data and information from the instrument at the quality which was originally saved
The stability and quality of communication between the AMPLECTOR Instrument Manager and the instrument are based on the transmission method of the instrument manufacturer
AMPLECTOR Instrument Manager and the instrument driver do not support any server and remote control mode.

Includes:

Krautkramer USM25 Lemo Ultrasonic Flaw Detector
Krautkramer G25MPN Sensor
Power Supply
Key Disk Ver 1.2 Demo 01
Krautkramer Application Software Demo

Also you can check product : USED GE Inspection Technologies Mentor EM Eddy Current Flaw Detector

GE Inspection Technologies USM 36 Ultrasonic Flaw Detector combines ergonomic and robust design and the biggest display screen of its class with state-of-the-art UT performance. It incorporates a range of innovative features to ensure that this new instrument is adopted as the everyday workhorse of flaw detectors by NDT inspectors globally.

The Krautkramer USM 36 features a 7 inch LCD display with a of 800x480 pixel resolution. Signals can be easily viewed and accurately interpreted. The Krautkramer USM 36 uses the familiar rotary knobs of previous models but the function keys have now been minimized into a simple, intuitive 6-key keyboard, allowing simple and efficient operation.

Applications for the Krautkramer USM 36 include:

Weld inspections in the power generation and petrochemical industries
Precise thickness measurement in the automotive industry
Corrosion measurement in the power generation
Inspection of forging
Inspection of special materials

The DAC instrument package adds the following to the standard package: DAC, square wave pulser, and AWS D 1.1 calibration tool.
The S instrument package adds the following to the DAC package: DGS, Phantom echo, backwall echo attenuation, a third gate ('C'), and a data logger.

When you select lemo connectors and the DAC instrument package (part number 0037460), you have the opportunity to select from three transducer and cable kit packages:

ASME Weld
MWB 45° angle beam transducer, 4MHz frequency, 8x9mm element (0056927)
MWB 60° angle beam transducer, 4MHz frequency, 8x9mm element (0056928)
MWB 70° angle beam transducer, 4MHz frequency, 8x9mm element (0056929)
MSEB dual element straight beam transducer, 4MHz, 3.5x10mm element (0057462)
Lemo 00 to Lemo 1 probe cable (0050486)
Lemo #00 to Dual Lemo 1 (0053887)

AWS Weld
AWS Gamma angle beam transducer, 2.25MHz frequency, 16x19mm element (113-292-601)
AWS 45° wedge, 63x63mm element (118-340-104)
AWS 60° wedge, 16x16mm element (118-340-105)
AWS 70° wedge, 16x16mm element (118-340-106)
BNC to Lemo 1 cable (118-140-018)

General Purpose
MB S straight beam transducer, 4MHz frequency, 10mm element (0057749)
Lemo 00 to Lemo 1 probe cable (0050486)

Technical Data :

Display

Display Shift ( Delay)
–15 … 3,500 μs

Probe Delay
0 … 1,000 μs

Velocity
250 … 16,000 m/s

PRF
Automatically optimized 15 … 2,000 Hz,
3 automatic setting modes: Auto Low,
Auto Med, Auto High, Manual

Display Screen

Size Diagonal
7"

Active Range (W x H)
152.4 × 91.44 mm2

Resolution (W x H)
800 × 480 pixels

Range
4 … 14,108 mm (555“) for longitudinal wave

Connectors

Probe Connectors
2 × LEMO-1 or 2 × BNC

USB Interface
USB type B connector

Service Interface
LEMO-1B, 8 pin

Pulser

Pulser Mode
Spike pulser, optionally: Square-wave pulser

Pulser Voltage (SQ Mode)
120 … 300 V, in steps of 10 V with a tolerance of 10%

Pulser Falling/Rising Time
max. 10 ns

Pulser Width (SQ Mode)
30 … 500 ns, in steps of 10 ns

Pulser Amplitude (Spike Mode)
low: 120 V, high: 300 V

Pulser Energy (Spike Mode)
low: 30 nS, high: 100 nS
Damping    50 ohms, 1000 ohms

Receiver

Digital Gain
Dynamic range 110 dB, adjustable in steps of 0.2 dB

Analog Bandwidth
0.5 … 20 MHz

Equivalent Input Noise
<80 nV/√Hz

Filters
Broadband 1-5 MHz / 2, 2.25 MHz / 4, 5 MHz / 10 MHz / 13, 15 MHz

Rectification
Positive half-wave, negative half-wave, full wave, RF signal

Gates

Independent Gates
Gates A and B (triggering by gate A),
Gate C (option, triggering by gate A or B)

Measurement Mode
Peak, Flank, J-FLANK, FIRST PEAK

Memory

Card Slot
SD-card slot for all standard SD-cards

Capacity
8 GB, SD-card

Datasets
UGO data structure in ASCII

Reports
JPG or BMP format

General

Battery
Li-Ion, operating time: 13 hours with full charge
Charging method (standard): internal with power adapter
Charging method (optional): external charger
Charge level: proportional charge level indicator

Power Adapter
Universal power supply unit 100 … 240 VAC, 50/60 Hz

Size (W x H x D)
255 × 177 × 100 mm (10” × 7.0” × 3.9”)

Weight
2.2 kg incl. battery

Languages
Bulgarian, Chinese, Czech, Dutch, English, Finnish, French, German, Hungarian, Italian, Japanese, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish.

Damp Heat and Humidity (Storage)
EN 60068 Part 2-30
6 cycles: 9 hrs at 25°C up in 3 hrs to 55°C, 9 hrs at 55°C then down to 25°C in 3 hrs, at93% humidity

Vibration
EN 60068 Part 2-6
2g per axis, 5 … 150 Hz, 1 oct/min, 25 cycles

Shocks
EN 60068 Part 2-27
1000 cycles per axis, 15 g, 11 ms, half-sine

Enclosure
IP66 according to IEC 60529

Operating Temperature
–10 … 55°C

Cold Operation
–10°C for 16 hrs, 502.5 Procedure II

Heat Operation
55°C for 16 hrs, 501.5 Procedure II

Storage Temperature
–20 … 60°C, without battery

Cold Storage
–20°C for 72 hrs, 502.5 Procedure I

Heat Storage
70°C for 48 hrs, 501.5 Procedure I

Options

AWS
AWS calibration tool, according to AWS D1.1
Structural Welding Code

DAC/JISDAC/CNDAC
DAC calibration tool, 16 points, according to EN
1712, EN 1713, EN 1714, ASTM E164, ASME,
ASME III, JIS Z3060, GB11345
TCG: 120 dB dynamic, 110 dB/μs slope

DGS
DGS calibration tool, according to: EN 1712, EN 1713, EN 1714, ASTM E164

Data logger
Grid file creation

3G
Gate C

SWP
For pulser parameter optimization, voltage setting 120 … 300 V in steps of 10 V, pulse width setting 30 … 500 ns in steps of 10 ns

Phantom-PRF
Phantom-PRF for the identification of erroneous
echoes caused by multiple
reflections in low-attenuation materials

BEA
Blackwall Echo Attenuation

Includes :

(1) Lithium Ion Rechargeable Battery Pack
(1) Lithium Ion Battery Charger /AC Power Supply
(1) SD Card (2 GB)
(1) USB Download Cable
(1) Transport Case
(1) Quick Reference Operating Card
(1) Operating Manual on CD
(1) Certificate Of Conformity

Also you can check product  : USED GE Inspection Technologies Mentor EM Eddy Current Flaw Detector

The USM 35 X ultrasonic flaw detectors is differentiated from other flaw detectors in its use of color displays which enhances the clarity of inspections, specifically for weld inspections. The use of color can also make easy comparisons during A-Scans.

The USM 35X is designed for industrial environments by weighing only 2.2 kg, having a 14 hour battery life and by having a temperature range of 0 to 60 degrees Celsius.

The base instrument package includes the flaw detector, on board battery charger, AC power supply, lithium ion battery, transport case, operating manual and a certificate of conformity.

Protection according to IP 66

A very sturdy housing has been designed for the USM 35X. We achieve a higher environmental protection and have improved the durability of this flaw detector for harsh use. The IP level corresponds to the degree of protection provided by the housing according to the IEC 529:1989.

IP 66 means that the instrument is totally protected, i.e. dust and water cannot penetrate into the instrument, even with heavy rain, sea spray and powerful jets of water coming from any direction.

Fast and bright color screen

Color brings you many additional benefits in your daily inspection job:
- Color display of monitor gates and curves (DAC, TCG, DGS) for direct recognition
- Messages and alarms in red characters for increased attention
- Use of color to display references (A-scan) to make comparisions easy

Harsh field and industrial environments

- Extended temperature range from 0° C/32° F to 60° C/140° F (-10° C/14° F to 60° C/140° F after individual climatic testing)
- Weighs only 2.2 kg
- Extended battery life to 14 hours
under real test conditions

Intuitive tools to help analysis

- The Color-Leg function displays coded information on the leg in color about angle beam inspection.
- 2 new carats (colorized triangles pointing at the echo for each gate).
- One carat ∇ pointing to the gate bar indicates the sound path measurement point at the echo
- The other carat ∆ pointing up indicates the amplitude measurement point at the echo in the gate.

New readings

Three new additional readings can be displayed for measurements taken with gates:
- dB-difference to reference gain with DAC / TCG (in the USM 35X DAC and USM 35X S)
- DGS reference gain (in the USM 35X S)
- Flaw classification according to JIS Z3060 (in the USM 35X DAC and USM 35X S)

Technical Data :

Calibration ranges
Min0 to 0.5 mm 10 % (steel),
0 to 0.02” 10 % (steel)

Max
0 to 9,999 mm 10 % (steel), 0 to 390” 10 % (steel) within the frequency range from 0.2 to 1 MHz / 0.5 to 4 MHz 0 to 1,420 mm 10% (steel), 0 to 56” 10 % (steel) within the frequency range from 0.8 to 8 MHz / 2 to 20 MHz

Sound velocity

1,000 to 15,000 m/s, 40 to 600 inch/ms variable in steps of 1 m/s, 0.1 inch/ms and fixed programmed values

Display delay
From -10 to 1,000 mm, -0.3 to 40” (340 µs)

Probe delay
0 to 200 µs

Auto calibration
Measurement and setting of sound velocity and probe delay using two known calibration echoes (2-point calibration)

Pulse intensity
220 pF, 1 nF

Damping
50 ohms, 500 ohms (1,000 ohms in TR mode)

Pulse repetition frequency
4 to 1,000 Hz, variable in 10 steps

Frequency ranges (-3 dB)
0.2 to 1 MHz / 0.5 to 4 MHz / 0.8 to 8 MHz / 2 to 20 MHz

Gain
0 to 110 dB, variable in steps

Gain steps
0.5 / 1 / 2 / 6 / 12 dB (or user-adjustable), step 0 is locked

Fine gain
4 dB, continuously variable in 40 steps

Rectification
Full-wave, negative and positive half-wave, RF mode

Reject
Linear, 0 to 80 % screen height Variable in steps of 1 %

Monitor gates
2 independent gates in color bar mode, start and width variable over the entire calibration range, response threshold of 10 to 90 % screen height variable in steps of 1 % (coincidence and anti-coincidence), alarm signal via LED and connectable internal horn, Gate A switchable as interface gate for Gate B, gate magnifier (zooming of gate range over the entire display range).

Sound path measurement
Digital display of sound path (projection distance, depth) between initial pulse and the first echo in the gate, or between the echoes in the two gates, measurement always at the intersection point with the echo flank or echo peak

Measurement resolution
0.01 mm within a range up to 99.99 mm/ 0.1 mm within a range from 100 to 999.9 mm/ 1 mm above 1,000 mm, 0.001” within a range up to 9.999”/ 0.01” above 10” With evaluation in the frozen A-scan: 0.5 % of the calibration range setting

Amplitude display
In % screen height
USM 35X DAC: additionally in dB above DAC or TCG
USM 35X S: additionally in dB above DGS curve or ERS

Displayed reading
Sound path, (reduced) projection distance, depth, amplitude for every gate, userconfigurable at four positions of measurement line and of the zoomed display in the A-scan

A-scan functions
Manual or automatic A-scan freeze, A-scan comparison, echo dynamics (envelope), peak echo storage

Color functions
Patented color-coded display of legs in angle testing, adaptation of background color to the light conditions of test environment, color display of monitor gates and of registration curves (DAC, TCG, DGS) for direct recognition, messages and alarms in red characters

DAC / TCG (Option)
Only USM 35X DAC and USM 35X S: DistanceAmplitude Curves (DAC) or TCG line (TCG) with a maximum of 10 reference echoes, 4 other curves or lines can be displayed with variable dB intervals. JIS DAC can be selected in order to allow inspection acording to JIS Z3060-2002 (Japanese Inspection Standard). Automatic gain control during DAC recording.

DGS (Option)
Only USM 35X S: DGS curves for single-element and dual-element probes (B1S, B2S, B4S, MB2S, MB4S, MB5S, WB…-1, WB…-2, SWB…-2, SWB…-5, MWB…-2, MWB…-4, SEB and MSEB) and for all materials, sound attenuation and transfer loss correction, 4 other curves can be displayed with variable dB intervals.

Display size / resolution
116 mm x 87 mm, 4.6" x 3.4" (W x H) 320 x 240 pixels

A-scan size / resolution
116 mm x 80 mm, 4.6” x 3.2”
320 x 220 pixels (zoom)

Units of measurement
mm, inch

Data memory
800 instrument setups or reports, including AScans can be stored, recalled, printed or exported to a computer

Direct documentation
Display screen contents, report including A-scan, reading, function list (parameter dump)

Printer driver
HP DeskJet, HP LaserJet, HP DJ 1200 (DeskJet)
HP LJ 1012 (LaserJet), EPSON FX/LX, SEIKO DPU

RS 232 interface
9-pin DSUB, bi-directional, 300 - 57,600 baud An USB adapator cable can be provided to connect the USM 35X to a computer that does not have RS 232 port.

Input/Output
8-way Lemo-1 socket (trigger output, gate alarm, test data release) Additional analog output for amplitude or
sound path in selected gate

VGA output
10-way Lemo-1 socket for the connection of an external display screen or beamer

Probe connections
2 x Lemo 1 or BNC

Dialog languages
German, English, French, Italian, Portuguese, Spanish, Danish, Swedish, Norwegian, Finnish, Czech, Slovenian, Romanian, Dutch, Croatian, Hungarian, Russian, Polish, Slovakian, Japanese.

Battery operation
Li-ion battery or 6 C-cells (NiCad, NiMH or AlMn), operating time: 14 hours with Li-ion battery
(6.6 Ah), approx. 3 hours with NiMH cells (3 Ah), battery charge check by an icon in the measurement line

Power pack/ battery charger operation
Via an external power supply (85 to 265 VAC); Operating voltage: 6 to 12 VDC Current consumption: max. 9 W, depending on the setting.

Weight
2.2 kg, 4.9 lbs., including batteries

Size
177 mm x 255 mm x 100 mm,
7.0" x 10" x 3.9" (H x W x D)

Environmental
Protection class: IP 66
Shock proof acc. to DIN IEC 68: 6 ms, 60 g,
3 shocks per orientation
Vibration proof acc. to DIN IEC 68: 0 - 150 Hz, 2 g,
20 cycles per orientation
Operating temperature: 0° to 60°C; 32° to 140°F
(-10°C; 14°F on special request)
Storage temperature: -20° to 60°C; 4° to 140°F

Data Logger Option

Memory capacity
5,000 readings, 500 A-scans for the readings, 100 jobs, 10 comment texts per job

Storable readings
Sound paths and sound path differences of all gates, amplitudes (% SH, dB-to-threshold, dBto-curve, %-to-curve, ERS), alarms of all gates or tolerance monitor

Lines / columns
Number of lines: maximum 5,000 (Linear file with one column), numerical indexing
Number of columns: maximum 26, indexing: A, …, Z

Tolerance monitor
Lower and upper acceptance level with monitor function

Minimum reading capture
Storage of the minimum value measured in continuous scanning, display of the value 3
seconds after uncoupling the probe

Monitor gate
1 additional independent gate in color bar mode

Also you can check product : USED GE Inspection Technologies USM 36 Ultrasonic Flaw Detector

GE/Waygate Technologies Krautkramer DMS Go Plus Ultrasonic Thickness Gauges, a Baker Hughes business product (formerly GE Inspection Technologies), provide accurate, reliable, and comprehensive thickness inspection data in a wide range of applications and environments. The DMS GO features the same hardware and operating platform as the USM Go flaw detector, combining the two to offer a powerful instrument. These Gauges are lightweight, ergonomic, and IP67 rated for operating in harsh environments. The DMS Go is ideal for inspections in oil & gas, power generation, aerospace, and metals industries.

The DMS Go includes automatic gain control for repeatability and corrosion monitoring, and built-in temperature compensation for accurate measurement up to 1000°F. An on-board data recorder can hold thousands of thickness readings including A-scan, B-scan, and MicroGrid attachments, which can be exported to user data management systems in various file formats. Three models are available to best suit a wide variety of inspection needs.


SPECS :

Display
5 inch, 800 × 480 pixels, 108 × 65 mm (W x H), > 200 cd/m2

Size (W x H x D)
175 × 111 × 50 mm (W × H × D)

Weight
850 g with battery

Protection
class IP 67

Operating temperature
0 – 55 °C

Battery
Li-Ion, rechargeable, > 8 hours operation time

Power adapter / charger
100 – 240 V AC, 50/60 Hz

Probe connector
Dual Lemo-00 (T/R)

PC interface
Micro USB

Memory card
SD-Card 16 GB max

Datarecorder
100.000 readings per file. Multiple files can be stored on SD card 8 file formats, Attachment of A-Scan, B-Scan and micro grid

Pulser
120 – 250 V, Spike wave, Automatically matched to probe

Puls Repetition Frequency
4, 8 or 16 Hz selectable

Receiver
110 dB dynamic, automatic gain control, Manual –high, -low, -auto

Measurement range
0,4 – 14.000 m/s (0.01 – 551 “)

Units
mm, inch, µs

Digital Display resolution
0,01 mm or 0,1 mm (0.001” or 0.01”) selectable

Measurement techniques
Zero crossing, IP to 1st echo, multi echo, TopCoat, Auto-V

Calibration
One-point, Two-point; Auto or Manual On-block and Off-block Zero; Automatic V-Path correction

Display mode
Thickness and A-Scan, Temperature corrected thickness, B-Scan, Min/Max capture, Differential

Compliance
EN 61010,EN 61326-1, EN 12668, ASTM E 1324, E317, ANSI/NCSL Z 540-1-1994 MIL-STD 45662A, MIL-STD 2154, EN 15317 2154, EN 15317

Includes :

(1) Lithium Ion "on-board" rechargeable battery
(1) Battery charger /AC power supply
(1) LCD screen protectors (10-pack)
(1) SD card (8GB)
(1) Transport case
(1) Hand strap
(1) Quick reference card
(1) Operating manual on CD
(1) Certificate of conformity
(1) Certificate Of Calbration
(1) Couplant sample
(1) DA501 Probe, 5MHz, .475" contact dia. (0500495)
(1) KBA533 Probe Cable (118-140-054)

Also you can check product : USED GE Inspection Technologies USN 60 Ultrasonic Flaw Detector - Calibrated