NEW Acoem Falcon Ultimate Data Collector Vibration Analyzers

ACOEM ONEPROD Falcon Ultimate Data Collector Vibration Analyzers

Four-Channel Vibration Analyser, Collector, Balancer, Recorder
Main features:
Compact and light case
Single-hand operating (left or right)
Color screen/touch screen
Icon-based intuitive user interface
Online help
Wireless 3-axis sensor
Integrated stroboscope, contactless laser-sighting temperature sensors, no connection of external accessory required.
Automatic identification process of the measurement point by contactless reading of QR-code, preventing sensor positioning errors and reducing measurement time.

Operating comfort and safety are ensured even in the most severe
environments. OneproD Falcon is also suitable for extreme conditions encountered in chemical and petrochemical industry, iron and steel industry, paper industry, cement works, etc.:
IP65 protected
Shock-proof
Intrinsically safe version available (OneproD MVP-2EX)
Based on the latest technology, OneproD Falcon offers added performances, in a more and more compact form:
4 vibration channels 1 trigger input
Frequency range: up to 80 kHz
Resolution: 101 000 lines
Communication via USB, WiFi, Ethernet, Internet
Long-time recording, up to 80 seconds at 51.2 kHz, 4 Msamples
Memory: 4 GB
Automatic configuration
Automatic diagnosis

Multiple functions range from the mere control of vibration levels to the most sophisticated diagnoses:
Data collector MAC (Machine Auto Controller) witch cloud storage, Basic Route or Smart Route
2, 4 plane balancer
Four-channel analyser, future option
Digital recorder, future option
Order analysis, future option
Analyser module with CPB measurement: octave, 1/3rd octave and 1/12th octave, future option

Balancer module:
1 -4 plane balancing

Integrated sensors
OneproD Falcon includes two laser-sighting contactless sensors that allow, without any additional accessories, to complement data collections with temperature (pyrometry) and rotation speed (LED stroboscope) measurements. Since they usually require handling external accessories, these additional measurements are often neglected although they provide a better knowledge of the machines.

Note: Class 2 laser instrument, wavelength: 630-680 nm, max. power: 1 mW according to Standard NF EN 60825-1.

QR-code
Measurement point identification: each bearing (or machine) is equipped with an QR-code and remotely issues its code.You just need to bring OneproD Falcon a few centimetres away from the bearing and press the reading key using the camera. After reading this code, OneproD Falcon automatically sets up the corresponding measurement point and is ready to start data acquisition. This method ensures reliable and faster measurements (no more inversion of the measurement point).

Data Collector
OneproD Falcon is a performing tool to collect data associated with OneproD XPR-300 Predictive Maintenance Software. Three levels of functions are available to meet closely your requirement at the most competitive price.
With its integrated sensors (laser-sighting pyrometer and LED stroboscope, automatic identification of the measurement point), only one cable (that of the vibration transducer) or wireless transducer is required to identify the measurement point and measure the data that are characteristic of the operating state of your machines (vibration, rotation speed, temperature):
Compactness
Speediness
Four channel measurement: faster, orbit analysis
Flash acquisition to speed up data collection
Single-hand measurements (left or right)
Shock-proof, IP65 protection
Organisation of measurements in a 4-level tree system
Automatic sequencing of measurements performed at the same geographic spot
Inspection notes
?Review? function to analyse measurement data directly on the instrument
Off-route measurements: – the level tree structure – copy and paste of machine, point or measurement

Balancer
This optional module is used to correct balancing defects on simple and complex machines.

From 1 to 4 balancing planes
Polar display of measurements
Storage of more than 1000 balancings
One-run balancing capability
Information on the measurement deviation (rotation speed, vibration)
Polar display of trial and correction weights
Splitting of correction weights
Display of balancing quality
Using two-channel/four-channel option, parallel measurements on 2/4 sensors are possible, resulting in a faster, safer and more accurate procedure

Analyser, future option
With this version, measurements and diagnoses can be performed directly on the instrument: overall level control, time and spectrum analysis. The two-channel option offers numerous other functions, such as orbit analysis for journal bearing machines and transfer function for the characterisation of mechanical resonances. Measurement data may be processed on a PC using the vib-Graph software.
Measurement organisation based on a 3-level tree structure Fast generation – using copy/paste functions at all levels.

Functions :

Instantaneous time spectrum
Power autospectrum
RMS spectrum
Cross-spectrum
Transfer function
Transmissibility
Coherence

Display
1, 2, 3, 4 traces
Linear or logarithmic amplitude, phase, real part, imaginary part
Orbit

Shock acquisition
Windowing
Averaging with validation

SPECS :

Touchscreen
Graphic colour touchscreen
Resolution: 800x480 pixels
Dimension: 154x92 mm (D7”)
Adjustable brightness
Can be used in direct sunlight
Icon functions

Touch keyboard
On touchscreen:
- 10 contextual function keys
- Functions are organised for single-hand measurement (left or right)
- Direct access to general functions: Home, Help, Setup, Screen copy, Picture, Bar code reader, Text note, Audio comment,Pyrometer, Stroboscope
- Full keyboard for text input. Several keyboards available: qwerty, azerty, Cyrillic,
Chinese

Acquisition
Synchronous on 4 channels trigger input 4-bits conversion
Sampling frequency:
- 102.4 kHz for each channel
- Up to 204.8 kHz on 1 channel

Antialiasing filter
Wireless acquisition with FALCON WLS triaxial
accelerometer
Digital signal processors
Real-time processing:
- 40 kHz on 4 channels
- Up to 80 kHz on 2 channels
Memory: 3.5 GB for measurements

Communication
USB 2 type B device (direct connection to PC)
USB 2 type A host (for USB stick)
Ethernet
Wi-Fi

Battery
Auto test and calibration function
High density Li-Ion type
Rechargeable without removing
Battery lifetime: 10 hours under intense use
Programmable automatic standby mode and switch-off

Analogue Inputs
Up to 4 programmable signal inputs (depending on instrument option):
- Frequency range: 0 - 40 kHz on 4 channels, 80 kHz on 1 channel
- Overload indicator in % with memorisation
- IEPE interface with real time integrity control, range  8V (power supply: 4 mA constant
current 23 VDC)
- Dynamic signal measurements (acceleration, vibration velocity, absolute displacement, relative displacement, electrical current, etc.) 
- /- 10 VAC
- 0, -24 V for proximity probes (a -
24Vdc power supply is available
on each channel using cable ref
FLC1005000))
- Input impedance AC/DC: 100 kΩ
- Accuracy: /- 1%
- Dynamic range > 90dB
- Sensors without electronics with optional charge amplifier
- DC input: from -24 VDC to 24 VDC for measurements of position and process parameters
- AC coupling: 0.3 Hz
- Compatible with triaxial senso

Trigger input:
Range: /- 10 V, 0 to 24 V, 0 to – 24 V
Adjustable triggering parameters
Automatic setup function
For rotation speed measurement, synchronous analysis, balancing, order analysis.
Input impedance: 100 kΩ
5 Vdc power supply for tacho probe
-24 Vdc power supply for proximity probes driver using optional cable ref FLC1006000

Microphone input
Microphone input for audio inspection notes

ANALOGUE OUTPUTS
1 headphone output to listen sensor signal, recorded
signal or audio inspection notes
1 stroboscope output: TTL For each channel and trigger input:
-24 Vdc power supply for proximity probe

BUILT-IN PYROMETER WITH LASER-SIGHTING
Contactless temperature measurement:
- Range: 0 to 200°C
- Accuracy: /- 3°C for ambient temperature
ranging from 18°C to 28°C.
- Resolution: 0.5°C
- Repeatability: /- 1°C
- Field of view: 5° @ 50% ( target ≃ 4 cm @ 50 cm)
- Time response: 1 s
- Fixed emissivity: 95%

BUILT-IN STROBOSCOPE
Rotation speed measurement:
- Range: 30 to 15000 RPM
- Automatic setting to machine speed predefined in setup
- Adjustment:
-½, x2
-Fast
-Fine
- Flash duration : adjustable from 0.5 to 15°
- Can be used independently or to adjust rotation speed in a route or from a spectrumdisplay

Built-in camera
Resolution: 640 x 480
Autofocus
Distance: 20 cm to - Flash mode

Identification of measurement point
Built-in bar code reader
Reading distance: from 20 cm to 50 cm according to
code dimension
Bar code format: QRcode
Learning mode to avoid codes manual input

Mechanical/environment
Protection: IP65.
Case with shock protection rubber
Shock protection: 1.2 m drop (1m for EX version)
Standard compliance:
-Safety: IEC61010-1
-EMC: directive 2004-108-CE
Dimensions: 200 x 265 x 65 mm
Weight: 1.8 kg including battery and rubber protection
Operating temperature: -10°C to 55°C
Humidity: 95% no condensation

FALCON-EX, intrinsically safe version:
ATEX certification: EX II 3 G, Ex ic IIC T4 Gc, supplied
with certified accessories.
IECEX certification: Ex ic IIC T4 Gc

Note: shock protection: 1m drop. The protection screenaccessory cannot be used in dangerous area and is not supplied.

Remote access
FALCON can be set up so as to communicate with your network through its Ethernet or Wi-Fi interface and used as a remote station. You can then use the applications installed on your computer directly from FALCON (SUPERVISION, CMMS…)


Also you can check product : NEW Acoem Falcon Expert Data Collector Vibration Analyzers

• Availability: 17 In Stock
• Model: Falcon Ultimate
• Brand: