NEW Olympus OmniScan SX Ultrasonic Flaw Detector - Available PA and UT Models
The OmniScan SX comes in two models: the SX PA and SX UT. The SX PA is a 16:64PR phased array unit, which, like the UT-only SX UT, is equipped with a conventional UT channel for pulse-echo, pitch-catch or TOFD inspection. Compared to the OmniScan MX2, the SX is 33% lighter and 50% smaller, offering an unprecedented level of portability for an OmniScan. The OmniScan SX touch screen offers a full-screen mode option that maximizes visibility, essentially converting many menu functions into easy touch-screen operations.
£4,521.81
Olympus is proud to introduce the OmniScan® SX, a flaw detector that benefits from more than 20 years of phased array experience and shares the OmniScan DNA. For improved ease of use, the OmniScan SX features a new streamlined software interface displayed on an 8.4 in. (21.3 cm) touch screen. A single-group and non-modular instrument, the OmniScan SX is easy to operate and cost-effective for less demanding applications.
The OmniScan SX comes in two models: the SX PA and SX UT. The SX PA is a 16:64PR phased array unit, which, like the UT-only SX UT, is equipped with a conventional UT channel for pulse-echo, pitch-catch or TOFD inspection. Compared to the OmniScan MX2, the SX is 33% lighter and 50% smaller, offering an unprecedented level of portability for an OmniScan.
The OmniScan SX touch screen offers a full-screen mode option that maximizes visibility, essentially converting many menu functions into easy touch-screen operations. The intuitive interface provides smooth menu selection, zooming, gate adjustments, cursor movements, and text and value input. These, along with other premium integrated features, including easy-to-follow setup and calibration Wizards, a rapid refresh rate for both the S-scan and A-scan displays, and a fast pulse repetition frequency (PRF), make the OmniScan SX a highly efficient inspection tool.
The OmniScan SX is fully compatible with the extensive portfolio of Olympus scanners, probes and accessories, as well as with its dedicated software companions, NDT SetupBuilder and OmniPC. Combined, the complete family of software and hardware contributes to a streamlined and efficient inspection workflow, from design and setup to acquisition and analysis.
SOFTWARE FEATURES
The new OmniScan software features enhancements for greater functionality in weld and corrosion markets.
In the effort for continuous improvement, the software interface was simplified and the response time optimized in order to provide the best experience possible for customers.
New features include:
Export C-Scan
New End-View with group merge
Interleave
Analysis attenuation gain
Scrolling layouts for easy interpretation
Improved accessibility with more interactive menus
Optimised main menus and wizards
Onboard compound scan
Curved geometry ray-tracing for longitudinal welds
Workflow
The OmniScan Family
Design
NDT SetupBuilder
NDT SetupBuilder design software is an integral part of the Olympus line of automated and semiautomated ultrasonic testing products. NDT supervisors can use NDT SetupBuilder software to simulate the inspection strategy in order to determine the appropriate number of beams and angles. This configuration can be imported into the OmniScan, thereby reducing configuration time and manipulation errors.
Your needs…
Olympus Solutions
Over the last few years Olympus has devoted considerable effort to innovating and deploying a wide range of complete market solutions aimed at meeting customers’ needs.
Acquisition
OmniScan
The OmniScan flaw detectors provide powerful inspection capabilities for manual and automated applications. They can be used with a full range of probes, scanners, and accessories, making Olympus the provider of choice for petrochemical, aerospace, and other industrial markets.
Analysis and Reporting
OmniPC
OmniPC software is the most efficient and affordable option for PC-based OmniScan data analysis, and features the same analysis and reporting tools provided in the OmniScan onboard software.
TomoView
TomoView 2.10 features advanced data processing, analysis and reporting tools that will allow you to get more out of your inspection data.
TomoView high-end features include:
Volumetric merging for multigroup data visualization.
C-Scan merging for combined data representation.
Signal-to-noise (SNR) analysis and optimization tools.
Advanced offline data generation tools.
Design with NDT SetupBuilder
NDT SetupBuilder is a new PC-based software allowing to create inspection setup and visualize beam simulations.
This software presents multiple features for easy, fast, and comprehensive inspection strategy elaboration that can directly be imported in the OmniScan SX.
Wedge and probe selection can be carried out within the Olympus part database
Instantaneously simulate beams trajectory in the material
Visualize and adjust the part, probe, weld, and beams in different views, such as: side, end, top, or 3D
Represent most commonly inspected materials and parts such as plates, and circumferential or axial welded pipes
Copy and flip existing groups for quick multiple probe configurations
Setup with OmniScan SX
The most efficient way to create a setup is to perform the simulation in NDT SetupBuilder, and imported directly, via SD card or USB key, to the OmniScan. Then, only a few basic operations are required in the instrument, such as setting the gate and range, before acquisition can begin. It is also very easy to create a setup right in the OmniScan, thanks to the following features:
Automatic probe recognition.
Intuitive wizards to guide the user through every step of the setup creation using the interactive help menu.
Weld Overlay and RayTracing simulation.
Group copy option for fast multiple-group configuration.
Acquire with OmniScan SX
Thanks to NDT SetupBuilder and OmniPC campanion software, the OmniScan SX can be dedicated exclusively to calibration and acquisition tasks or, if preferred, can perform all the steps of an inspection, right on its large, user-friendly touch screen.
Calibration
To achieve a code-compliant inspection, the Calibration Wizard ensures that every focal law in every group is the direct equivalent of a single-channel conventional flaw detector. The user is guided step-by-step through the required calibrations like: Velocity, Wedge Delay, Sensitivity, TCG, DAC, AWS, and encoder calibrations. Now, TOFD PCS calibration and lateral wave straightening can be performed automatically.
Acquisition
The OmniScan SX enables easy configuration of inspection parameters for either manual, one-line, or raster encoded scans. The acquisition is displayed in real time through different views and offers the ability to store data on a hot-swappable SD card or USB 2.0 device.
Intelligent layouts for configuring up to 8 groups.
Full-screen mode for better visualization of defects.
Synchronisation and measurements can be processed using different gate combinations.
Data Analysis with OmniPC
OmniPC is a new software program that benefits form the same user interface and analysis and reporting features as the OmniScan with the added flexibility to be run on a personal computer.
With OmniPC, the OmniScan unit can now be used strictly for scanning while analysis is performed simultaneously on a personal computer. This software can also be used in conjunction with extra large screens for increased visibility, and with keyboard shortcuts for faster operations.
Data Analysis with OmniScan SX
Data, reference, and measurement cursors for defect sizing.
Extensive readings database and predefined lists for trigonometry, flaw statistics on axes, volumetric position information, code-based acceptance criteria, corrosion mapping statistics, etc.
Views are linked for interactive analysis and are automatically updated when performing off-line gate repositioning.
Optimized preconfigured layouts for quick and simple length, depth, and height sizing of flaws.
Reporting
The OmniScan SX and OmniPC can both be used to generate reports with an indication table listing up to eight readings, such as amplitude, position, and size of the defects. The report can also be customized with additional readings and comments specific to each indication, and can be saved as an HTML document. RayTracing tools allow the indication positions to be represented on the weld profile. High-resolution images can be inserted along with all relevant inspection parameters.
APPLICATIONS
The Omniscan SX provides Olympus with a new and versatile tool to add to its arsenal of innovative and creative complete market solutions aimed at simplifying your workflow and improving overall productivity.
Phased Array Weld Inspection
The OmniScan PA is at the heart of the manual and semiautomated phased array weld inspection solutions developed by Olympus for the oil and gas industry. These systems can be used for inspection in compliance with ASME, API, and other code criteria, while offering high-speed detection capabilities, and facilitating indication interpretation.
Corrosion Mapping and Composite Inspection
Zero-degree inspection just became even more accessible with the arrival of the OmniScan SX. For corrosion or composite inspection, Olympus offers field-proven solutions for detection of anomalies or wall loss.
TOFD Weld Inspection
TOFD is an easy and efficient approach for primary detection of weld defects. It is quick, cost-effective and capable of sizing defects present in the volume of the weld, a problematic area for manufacturing defects.
Component Inspection
Using ultrasonic techniques, inspection of components can detect cracks, wall loss, and other damage. With the capacity for both angle and linear zero-degree beams, the OmniScan SX is a very cost-efficient solution for this type of single-group inspection.
SPECS :
Housing
Overall dimensions (W x H x D)
267 mm × 208 mm × 94 mm (10.5 in. × 8.2 in. × 3.7 in.)
Weight
3.4 kg (7.5 lb) with battery
Data Storage
Storage devices
SDHC card* or most standard USB storage devices.
*Lexar® brand memory cards are recommended for optimized results.
Data file size
300 MB
I/O Ports
USB ports
2 USB ports, compliant with USB 2.0 specifications
Audio alarm
Yes
Video output
Video out (SVGA)
I/O Lines
Encoder
2-axis encoder line (quadrature, up, down, or clock/direction)
Digital input
4 digital TTL inputs, 5 V
Digital output
3 digital outputs TTL, 5 V, 15 mA maximum per output
Acquisition on/off switch
Yes, through configuration of a digital input
Power output line
5 V, 500 mA power output line (short-circuit protected)
Pace input
5 V TTL pace input
Display
Display size
21.3 cm (8.4 in.) (diagonal)
Resolution
800 pixels x 600 pixels
Brightness
600 cd/m2
Viewing angles
Horizontal: –80° to 80° Vertical: –60° to 80°
Number of colors
16 million
Type
TFT LCD
Power Supply
Battery type
Smart Li-ion battery
Number of batteries
1
Battery life
Minimum 6 hours under normal operating conditions
Environmental Specifications
Operating temperature range
-10 °C to 45 °C
(14 ºF to 113 ºF)
Storage temperature range
–20 °C to 60 °C (–4 ºF to 140 ºF) with battery
–20 °C to 70 °C (–4 ºF to 158 ºF) without battery
Relative humidity
Max. 70% RH at 45°C noncondensing
Ingress protection rating
Designed to meet requirements of IP66
Shockproof rating
Drop-tested according to MIL-STD-810G 516.6
Ultrasound Specifications (applies to OMNISX-1664PR)
Connectors
1 Phased Array connector: Olympus PA connector
2 UT connectors: LEMO 00
Number of focal laws
256
Probe recognition
Automatic probe recognition
Pulser/Receiver
Aperture
16 elements
Number of elements
64 elements
Pulser
PA Channels
UT Channel
Voltage
40 V, 80 V, and 115 V 95 V, 175 V, and 340 V
Pulse width
Adjustable from 30 ns to 500 ns; resolution of 2.5 ns Adjustable from 30 ns to 1,000 ns; resolution of 2.5 ns
Pulse shape
Negative square wave Negative square wave
Output impedance
35 Ω (pulse-echo mode);
30 Ω (pitch- catch mode)
<30 Ω
Receiver
PA Channels
UT Channel
Gain
0 dB to 80 dB, maximum input signal 550 mVp-p (full-screen height)
0 dB to 120 dB maximum input signal 34.5 Vp-p (full-screen height)
Input impedance
60 Ω (pulse-echo mode);
150 Ω (pitch- catch mode)
60 Ω (pulse-echo mode);
50 Ω (pulse-receive mode)
System bandwidth
0.5 MHz to 18 MHz (NOTE: The previously stated 0.6 MHz lower limit used a strict −3 dB attenuation for the cutoff frequency.) 0.25 MHz to 28 MHz (–3 dB)
Beamforming
Scan type
Sectorial or linear
Group quantity
1
Data Acquisition
PA Channels
UT Channel
Effective digitizing frequency
Up to 100 MHz
100 MHz
Maximum pulsing rate
Up to 6 kHz (C-scan)
Data Processing PA Channels
UT Channel
Number of data points
Up to 8,192
Real-time averaging
PA: 2, 4, 8, 16 UT: 2, 4, 8, 16, 32, 64
Rectifier
RF, full wave, half wave , half wave –
Filtering
3 low-pass, 3 band-pass, and 5 high-pass filters 3 low-pass, 6 band-pass, and 3 high-pass filters (8 low-pass filters when configured in TOFD)
Video filtering
Smoothing (adjusted to probe frequency range)
Data Visualization
A-scan refresh rate
A-scan: 60 Hz; S-scan: 60 Hz
Data Synchronization
On internal clock
1 Hz to 6 kHz
On encoder
On 2 axes: from 1 to 65,536 steps
Programmable Time-Corrected Gain (TCG)
Number of points
16: One TCG (time-corrected gain) curve per focal law
Maximum slope
40 dB/10 ns
Alarms
Number of alarms
3
Conditions
Any logical combination of gates
Also you can check product : NEW Olympus Epoch 6LT Portable Ultrasonic Flaw Detector
The OmniScan SX comes in two models: the SX PA and SX UT. The SX PA is a 16:64PR phased array unit, which, like the UT-only SX UT, is equipped with a conventional UT channel for pulse-echo, pitch-catch or TOFD inspection. Compared to the OmniScan MX2, the SX is 33% lighter and 50% smaller, offering an unprecedented level of portability for an OmniScan.
The OmniScan SX touch screen offers a full-screen mode option that maximizes visibility, essentially converting many menu functions into easy touch-screen operations. The intuitive interface provides smooth menu selection, zooming, gate adjustments, cursor movements, and text and value input. These, along with other premium integrated features, including easy-to-follow setup and calibration Wizards, a rapid refresh rate for both the S-scan and A-scan displays, and a fast pulse repetition frequency (PRF), make the OmniScan SX a highly efficient inspection tool.
The OmniScan SX is fully compatible with the extensive portfolio of Olympus scanners, probes and accessories, as well as with its dedicated software companions, NDT SetupBuilder and OmniPC. Combined, the complete family of software and hardware contributes to a streamlined and efficient inspection workflow, from design and setup to acquisition and analysis.
SOFTWARE FEATURES
The new OmniScan software features enhancements for greater functionality in weld and corrosion markets.
In the effort for continuous improvement, the software interface was simplified and the response time optimized in order to provide the best experience possible for customers.
New features include:
Export C-Scan
New End-View with group merge
Interleave
Analysis attenuation gain
Scrolling layouts for easy interpretation
Improved accessibility with more interactive menus
Optimised main menus and wizards
Onboard compound scan
Curved geometry ray-tracing for longitudinal welds
Workflow
The OmniScan Family
Design
NDT SetupBuilder
NDT SetupBuilder design software is an integral part of the Olympus line of automated and semiautomated ultrasonic testing products. NDT supervisors can use NDT SetupBuilder software to simulate the inspection strategy in order to determine the appropriate number of beams and angles. This configuration can be imported into the OmniScan, thereby reducing configuration time and manipulation errors.
Your needs…
Olympus Solutions
Over the last few years Olympus has devoted considerable effort to innovating and deploying a wide range of complete market solutions aimed at meeting customers’ needs.
Acquisition
OmniScan
The OmniScan flaw detectors provide powerful inspection capabilities for manual and automated applications. They can be used with a full range of probes, scanners, and accessories, making Olympus the provider of choice for petrochemical, aerospace, and other industrial markets.
Analysis and Reporting
OmniPC
OmniPC software is the most efficient and affordable option for PC-based OmniScan data analysis, and features the same analysis and reporting tools provided in the OmniScan onboard software.
TomoView
TomoView 2.10 features advanced data processing, analysis and reporting tools that will allow you to get more out of your inspection data.
TomoView high-end features include:
Volumetric merging for multigroup data visualization.
C-Scan merging for combined data representation.
Signal-to-noise (SNR) analysis and optimization tools.
Advanced offline data generation tools.
Design with NDT SetupBuilder
NDT SetupBuilder is a new PC-based software allowing to create inspection setup and visualize beam simulations.
This software presents multiple features for easy, fast, and comprehensive inspection strategy elaboration that can directly be imported in the OmniScan SX.
Wedge and probe selection can be carried out within the Olympus part database
Instantaneously simulate beams trajectory in the material
Visualize and adjust the part, probe, weld, and beams in different views, such as: side, end, top, or 3D
Represent most commonly inspected materials and parts such as plates, and circumferential or axial welded pipes
Copy and flip existing groups for quick multiple probe configurations
Setup with OmniScan SX
The most efficient way to create a setup is to perform the simulation in NDT SetupBuilder, and imported directly, via SD card or USB key, to the OmniScan. Then, only a few basic operations are required in the instrument, such as setting the gate and range, before acquisition can begin. It is also very easy to create a setup right in the OmniScan, thanks to the following features:
Automatic probe recognition.
Intuitive wizards to guide the user through every step of the setup creation using the interactive help menu.
Weld Overlay and RayTracing simulation.
Group copy option for fast multiple-group configuration.
Acquire with OmniScan SX
Thanks to NDT SetupBuilder and OmniPC campanion software, the OmniScan SX can be dedicated exclusively to calibration and acquisition tasks or, if preferred, can perform all the steps of an inspection, right on its large, user-friendly touch screen.
Calibration
To achieve a code-compliant inspection, the Calibration Wizard ensures that every focal law in every group is the direct equivalent of a single-channel conventional flaw detector. The user is guided step-by-step through the required calibrations like: Velocity, Wedge Delay, Sensitivity, TCG, DAC, AWS, and encoder calibrations. Now, TOFD PCS calibration and lateral wave straightening can be performed automatically.
Acquisition
The OmniScan SX enables easy configuration of inspection parameters for either manual, one-line, or raster encoded scans. The acquisition is displayed in real time through different views and offers the ability to store data on a hot-swappable SD card or USB 2.0 device.
Intelligent layouts for configuring up to 8 groups.
Full-screen mode for better visualization of defects.
Synchronisation and measurements can be processed using different gate combinations.
Data Analysis with OmniPC
OmniPC is a new software program that benefits form the same user interface and analysis and reporting features as the OmniScan with the added flexibility to be run on a personal computer.
With OmniPC, the OmniScan unit can now be used strictly for scanning while analysis is performed simultaneously on a personal computer. This software can also be used in conjunction with extra large screens for increased visibility, and with keyboard shortcuts for faster operations.
Data Analysis with OmniScan SX
Data, reference, and measurement cursors for defect sizing.
Extensive readings database and predefined lists for trigonometry, flaw statistics on axes, volumetric position information, code-based acceptance criteria, corrosion mapping statistics, etc.
Views are linked for interactive analysis and are automatically updated when performing off-line gate repositioning.
Optimized preconfigured layouts for quick and simple length, depth, and height sizing of flaws.
Reporting
The OmniScan SX and OmniPC can both be used to generate reports with an indication table listing up to eight readings, such as amplitude, position, and size of the defects. The report can also be customized with additional readings and comments specific to each indication, and can be saved as an HTML document. RayTracing tools allow the indication positions to be represented on the weld profile. High-resolution images can be inserted along with all relevant inspection parameters.
APPLICATIONS
The Omniscan SX provides Olympus with a new and versatile tool to add to its arsenal of innovative and creative complete market solutions aimed at simplifying your workflow and improving overall productivity.
Phased Array Weld Inspection
The OmniScan PA is at the heart of the manual and semiautomated phased array weld inspection solutions developed by Olympus for the oil and gas industry. These systems can be used for inspection in compliance with ASME, API, and other code criteria, while offering high-speed detection capabilities, and facilitating indication interpretation.
Corrosion Mapping and Composite Inspection
Zero-degree inspection just became even more accessible with the arrival of the OmniScan SX. For corrosion or composite inspection, Olympus offers field-proven solutions for detection of anomalies or wall loss.
TOFD Weld Inspection
TOFD is an easy and efficient approach for primary detection of weld defects. It is quick, cost-effective and capable of sizing defects present in the volume of the weld, a problematic area for manufacturing defects.
Component Inspection
Using ultrasonic techniques, inspection of components can detect cracks, wall loss, and other damage. With the capacity for both angle and linear zero-degree beams, the OmniScan SX is a very cost-efficient solution for this type of single-group inspection.
SPECS :
Housing
Overall dimensions (W x H x D)
267 mm × 208 mm × 94 mm (10.5 in. × 8.2 in. × 3.7 in.)
Weight
3.4 kg (7.5 lb) with battery
Data Storage
Storage devices
SDHC card* or most standard USB storage devices.
*Lexar® brand memory cards are recommended for optimized results.
Data file size
300 MB
I/O Ports
USB ports
2 USB ports, compliant with USB 2.0 specifications
Audio alarm
Yes
Video output
Video out (SVGA)
I/O Lines
Encoder
2-axis encoder line (quadrature, up, down, or clock/direction)
Digital input
4 digital TTL inputs, 5 V
Digital output
3 digital outputs TTL, 5 V, 15 mA maximum per output
Acquisition on/off switch
Yes, through configuration of a digital input
Power output line
5 V, 500 mA power output line (short-circuit protected)
Pace input
5 V TTL pace input
Display
Display size
21.3 cm (8.4 in.) (diagonal)
Resolution
800 pixels x 600 pixels
Brightness
600 cd/m2
Viewing angles
Horizontal: –80° to 80° Vertical: –60° to 80°
Number of colors
16 million
Type
TFT LCD
Power Supply
Battery type
Smart Li-ion battery
Number of batteries
1
Battery life
Minimum 6 hours under normal operating conditions
Environmental Specifications
Operating temperature range
-10 °C to 45 °C
(14 ºF to 113 ºF)
Storage temperature range
–20 °C to 60 °C (–4 ºF to 140 ºF) with battery
–20 °C to 70 °C (–4 ºF to 158 ºF) without battery
Relative humidity
Max. 70% RH at 45°C noncondensing
Ingress protection rating
Designed to meet requirements of IP66
Shockproof rating
Drop-tested according to MIL-STD-810G 516.6
Ultrasound Specifications (applies to OMNISX-1664PR)
Connectors
1 Phased Array connector: Olympus PA connector
2 UT connectors: LEMO 00
Number of focal laws
256
Probe recognition
Automatic probe recognition
Pulser/Receiver
Aperture
16 elements
Number of elements
64 elements
Pulser
PA Channels
UT Channel
Voltage
40 V, 80 V, and 115 V 95 V, 175 V, and 340 V
Pulse width
Adjustable from 30 ns to 500 ns; resolution of 2.5 ns Adjustable from 30 ns to 1,000 ns; resolution of 2.5 ns
Pulse shape
Negative square wave Negative square wave
Output impedance
35 Ω (pulse-echo mode);
30 Ω (pitch- catch mode)
<30 Ω
Receiver
PA Channels
UT Channel
Gain
0 dB to 80 dB, maximum input signal 550 mVp-p (full-screen height)
0 dB to 120 dB maximum input signal 34.5 Vp-p (full-screen height)
Input impedance
60 Ω (pulse-echo mode);
150 Ω (pitch- catch mode)
60 Ω (pulse-echo mode);
50 Ω (pulse-receive mode)
System bandwidth
0.5 MHz to 18 MHz (NOTE: The previously stated 0.6 MHz lower limit used a strict −3 dB attenuation for the cutoff frequency.) 0.25 MHz to 28 MHz (–3 dB)
Beamforming
Scan type
Sectorial or linear
Group quantity
1
Data Acquisition
PA Channels
UT Channel
Effective digitizing frequency
Up to 100 MHz
100 MHz
Maximum pulsing rate
Up to 6 kHz (C-scan)
Data Processing PA Channels
UT Channel
Number of data points
Up to 8,192
Real-time averaging
PA: 2, 4, 8, 16 UT: 2, 4, 8, 16, 32, 64
Rectifier
RF, full wave, half wave , half wave –
Filtering
3 low-pass, 3 band-pass, and 5 high-pass filters 3 low-pass, 6 band-pass, and 3 high-pass filters (8 low-pass filters when configured in TOFD)
Video filtering
Smoothing (adjusted to probe frequency range)
Data Visualization
A-scan refresh rate
A-scan: 60 Hz; S-scan: 60 Hz
Data Synchronization
On internal clock
1 Hz to 6 kHz
On encoder
On 2 axes: from 1 to 65,536 steps
Programmable Time-Corrected Gain (TCG)
Number of points
16: One TCG (time-corrected gain) curve per focal law
Maximum slope
40 dB/10 ns
Alarms
Number of alarms
3
Conditions
Any logical combination of gates
Also you can check product : NEW Olympus Epoch 6LT Portable Ultrasonic Flaw Detector
- Availability: 16 In Stock
- Model: OmniScan SX
-
Brand:
