Rockwell Automation

Used Allen Bradley Enpac 2500 1441-PEN25-2C Vibration Analyzer With Balancing Module

The 1441-PEN25-2C is part of the Enpac 2500 series of portable data collectors developed for evaluating machinery condition through precision noise and vibration measurements. Its internal design incorporates dual-channel capability to capture simultaneous data from multi-axis and single-sensor sources. Integration with accelerometers, transducers, displacement probes, and voltage signals ensures compatibility with diverse maintenance programs. Typical use cases include predictive maintenance routines, machine health monitoring, and diagnostic assessments in industrial environments requiring accurate condition-based analysis.

Key Features:

Dual-channel input: Channel 1 supports tri-axial ICP/AC/DC; Channel 2 supports single ICP/AC/DC.
Wide sensor compatibility: Works with accelerometers, velocity transducers, displacement probes, and photo-optical pickups.
Comprehensive measurement set: Captures acceleration, velocity, displacement, temperature, voltage, and more.
Handheld design: Portable form factor suitable for field diagnostics and maintenance rounds.
Versatile signal support: Accepts AC/DC voltage signals and manual data entry for flexible workflows.
Predictive maintenance tool: Designed for machinery health monitoring using vibration and noise analysis.
Model ENPAC 2500: Part of a proven series used in industrial equipment diagnostics.

Specificaitons :

Brand
Allen-Bradley

Category
PLCs/Machine Control

Part Number
1441-PEN25-2C

Subcategory
Data Collector Kit

Manufacturer
Allen-Bradley

Model
Enpac 2500

Type
Handheld

Channels
Ch1: Tri-axial ICP/AC/DC; Ch2: Single ICP/AC/DC

Input Signal Types
Accelerometers, velocity transducers, displacement probes, photo-optical pickups, tri-axial transducers, accel/velocity transducers, AC/DC volts

Measurement Parameters
Acceleration, velocity, displacement, gSE, ESP, temperature, phase, voltage

Data Collection
Method    Multi-parameter vibration and noise analysis

Application
Predictive maintenance and industrial diagnostics

Compatibility
Wide range of vibration and condition-monitoring sensors

Form Factor
Portable handheld data collector

INCLUDED :

Data Collector
Operating Sys
Battery
Case
Communication cable
USB power splitter
Strap
rubber bump sleeve

Used Allen Bradley 1441-DYN25 Dynamix 2500 Data Collector

The Dynamix 2500 data collector is a real-time, multi-channel Fast Fourier, Transformer (FFT) signal analyzer and data collector for predictive, maintenance and machinery vibration diagnostics. It is capable of measuring, processing, displaying, and storing a wide range of analysis functions. It can operate as a stand-alone instrument or you can download your measurements to your software application for program analysis.

This portable data collector and analyzer is one of the tools Rockwell Automation provides for your comprehensive CbM program, and is also available in a version for ATEX Zone 2 and IEC Ex for hazardous environments. Its measurement capability, analysis functions, and ease of use make it the perfect tool for your portable predictive maintenance strategy.

Features and Benefits
A portable data collector – used for performing data collection, analysis, and root cause correction in rotating equipment applications (e.g., motors, pumps, fans, gear boxes, etc.) – is an important part of your Condition-based Maintenance (CbM) program.

The Dynamix 2500 data collector includes:
- A high performance computing platform, running Windows CE 6.0
- A sunlight-visible color LCD display
- Suitability for harsh environments, with a Mil 810 spec drop rating, IP65 sealing, and an operating temperature range from -10C to 50C
- Multiple certifications (c-UL-US, CSA, CE, Ex, and IEC Ex for various environments

Specifications :

Product Type:
Portable Data Collector

Input Channels
4

Frequency Range
2 Hz to 80 kHz

Operating Temperature
-10 to 50 °C (14 to 122 °F)

Weight
Approximately 715 g (1.52 lb)

Dimensions (H x W)
186 x 93 mm (7.32 x 3.66 in.) at narrowest point; 186 x 134 mm (7.32 x 5.28 in.) at widest point

Display
Backlit color LCD, 1/4 VGA (240 x 320)

Memory
128 MB RAM; 64 MB application and user data; supports SDHC cards up to 16 GB

Battery
Rechargeable lithium-ion, 2600 m 

Certifications
cCSAus, CE, C-Tick

INCLUDED :

Dust Cap Set for Inputs
Operating System and Info CD
Global Power Supply
Battery
Transit Case
Communication Cable USB Power Splitter
Hand Strap
Rubber Bump Sleeve

Also you can check product : Used Allen Bradley Enpac 2500 1441-PEN25-2C Vibration Analyzer With Balancing Module

NEW Allen Bradley PanelView 5510 Graphic Terminal 2715P-B15CD

The 2715P-B15CD terminal is a PanelView 5510 terminal that has been manufactured and designed by Allen Bradley/Rockwell Automation. This terminal is compatible with controllers from the Allen Bradley ControlLogix and CompactLogix series through an Ethernet/IP network. This terminal can display animated graphics and texts that provide a visualization of the application process to the operators so that they can visualize and understand the operating state of different pieces of equipment into the application process. The Allen Bradley/Rockwell Automation 2715P-B15CD PanelView 5510 terminal has an integrated environment that enables data transfers with different Logix platforms and equipment. It supports a maximum of 1000 user-defined screens and it also supports a maximum of 4000 Logix-based alarms.

The Allen Bradley/Rockwell Automation 2715P-B15CD PanelView 5510 terminal comes with an HMI navigation button, a keypad, and a touchscreen of 15 inches. This special navigation button enables the users to perform a quick setup. The screen of the terminal consists of a thin-film-transistor and a liquid crystal display. The touchscreen is analog-resistive and it has an actuation rating of 1 million presses. The keypad comes with 20 function keys, a numeric keypad, and navigation keys, all with an operating force rating of 300 g. The Allen Bradley/Rockwell Automation 2715P-B15CD PanelView 5510 terminal has a non-replaceable backlight that uses a light-emitting diode and that has a lifespan of 50,000 hours at a specific temperature of 40 degrees Celsius and at half-brightness. This backlight has a power consumption of 8.5 Watts. The display has a screen area of 304 x 228 millimeters and a display resolution of 1024 x 768 XGA with a ratio of 4:3, it also has a color depth of 24 bits.

Specificaitons :

Electrical & Connectivity

Enclosure Color    
Dark Blue (Pantone 432C) and
Height    
13.0 in
Image Brightness    
300 nits
Input Signal    
24V DC
Maximum Resolution    
1024 x 768

Aspect ratio
4:3
Backlight
Type: light-emitting diode, non-replaceable, Life: 50000 hr minimum at 40 °C (104 °F) to half-brightness
Backlight power consumption, typical
8.5 W
Battery (real-time clock backup)
Accuracy: ±2 min per month, Battery life: 4 yr minimum at 25 °C (77 °F), Replacement: CR2032 lithium coin cell (Allen‑Bradley part number 2711P-RY2032)
Brightness, typical
300 cdb/m²
Color depth
24-bit color graphics (16.7 mon colors)
Display resolution
1024 x 768 XGA
Ethernet ports
Two 10/100Base-T, Auto MDI/MDI-X Ethernet ports that support (Device Level Ring) DLR, linear, or star network topologies.
IO link master
False
Input voltage, nom
24V DC (18...30V DC)
Inrush current, typical
7 A
Keypad
20 function keys: L1...L10, R1...R10, Numeric keypad and navigation keys, Actuating rating: 1 mon presses, Operating force: 300 g
Memory
RAM: 1 GB RAM, User available: 1 GB nonvolatile storage for projects
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces Wireless
0
Number of HW-interfaces industrial Ethernet
2
Number of HW-interfaces other
0
Number of HW-interfaces parallel
0
Number of HW-interfaces serial TTY
0
Number of buttons with LED
0
Number of function buttons, programmable
0
Number of grey-scales/blue-scales of display
0
Number of interfaces PROFINET
0
Number of system buttons
1
Operator input
Touch with keypad plus menu navigation button
Power consumption, max
33 W
Power consumption, typical
27 W
Power supply
Supports SELV and PELV 24V DC supplies
Process default value (input) possible
False
Process value representation (output) possible
True
Radio standard Bluetooth
False
Radio standard GPRS
False
Radio standard GSM
False
Radio standard UMTS
False
Radio standard Wi-Fi 802.11
False
Screen diagonal
15 in
Secure Digital (SD) card slot
One SD card slot for external storage, Supports cat. no. 1784-SDx cards
Software    
Studio 5000 environment provides single portal to View Designer and Logix Designer applications
Status indicator
STS (status, green), ERR (error, red)
Suitable for safety functions
False
Supply voltage DC
18 V
Supporting protocol for AS-Interface Safety at Work
False
Supporting protocol for ASI
False
Supporting protocol for CAN
False
Supporting protocol for Data-Highway
False
Supporting protocol for DeviceNet
False
Supporting protocol for DeviceNet Safety
False
Supporting protocol for EtherNet/IP
True
Supporting protocol for Foundation Fieldbus
False
Supporting protocol for INTERBUS
False
Supporting protocol for INTERBUS-Safety
False
Supporting protocol for KNX
False
Supporting protocol for LON
False
Supporting protocol for Modbus
False
Supporting protocol for PROFIBUS
False
Supporting protocol for PROFINET CBA
False
Supporting protocol for PROFINET IO
False
Supporting protocol for PROFIsafe
False
Supporting protocol for SERCOS
False
Supporting protocol for SUCONET
False
Supporting protocol for SafetyBUS p
False
Supporting protocol for TCP/IP
True
Supporting protocol for other bus systems
False
Touch screen
Analog resistive, Actuation rating: 1 mon presses, Operating force: <100 g
Touch technology
Resistive touch
Type of display    
TFT
USB host port
0.5A @ 5V DC (Type A)
USB ports
Host: two USB 2.0 high-speed (type A) host port to support removable USB drives for external storage, Device: one USB 2.0 high-speed (type B) device port to connect to a host computer that is software-feature dependent.
Voltage type of supply voltage
DC
With Allen‑Bradley brand marking    
True
With SW interfaces
True
With alpha numeric keyboard
False
With colour display
True
With message indication
True
With message system (incl. buffer and confirmation)
False
With numeric keyboard
True
With printer output
False
With recipes
False

Altitude, operating
2000 m
Conformal coated
True
Degree of protection (IP), front side
IP66
Degree of protection (NEMA), front side
4X
List of degrees of protection (NEMA)
4X, 12, 13
Nonoperating temperature
-25 °C
Operating temperature
0 °C
Power dissipation
62 btu/hr
Relative humidity
5...95% noncondensing
Shock    
Operating: 15 G @ 11 ms, Nonoperating: 30 G @ 11 ms
Vibration    
0.012 peak-peak, 10...57 Hz, 2 G peak at 57...500 Hz

Physical Characteristics

Mechanical
Cutout dimensions, approx
Height: 290 mm (11.42 in), Width: 418 mm (16.46 in)
Height of the front
329 mm
Mounted depth
64 mm
Overall depth
69.5 mm
Rail mounting possible
False
Wall mounting/direct mounting
True
Width of the front
484 mm

Construction
View area
Width: 304 mm (12 in), Height: 228 mm (9 in)
Weight, approx
5.5 g

Also you can check product : Used Allen Bradley 1441-DYN25 Dynamix 2500 Data Collector

New Allen Bradley ControlLogix 5580 1756-L85E Controller With 40 MB

The ControlLogix controller provides a scalable controller solution that is capable of addressing many I/O points. You can place the ControlLogix controller into any slot of a ControlLogix I/O chassis, and install multiple controllers in the same chassis.

ControlLogix controllers can monitor and control I/O across the ControlLogix backplane, and over network links. The ControlLogix 5580 controllers have an embedded Ethernet port for a direct connection to Ethernet-enabled devices and networks, and also support communication interface modules in the local chassis.

ControlLogix 5580 and ControlLogix 5570 controllers are available with a conformal coating. A conformal coating provides a layer of protection against contaminants and humidity to help protect the assembly and extend product life in harsh, corrosive environments. Products with a conformal coating have a ‘K’ suffix at the end of the catalog number.

Technical Specifications

Electrical & Connectivity

Embedded Network Port    
True

Local Programming Port    
1 USB

Motion Axis Supported    
256

Power Supply
5ma @ 1.2V DC, 1.20A @ 5.1V DC

Component-level Specifications

Device does not consume power
No

Pwr diss at full load 100% (W)
6.2

Pwr diss modes not applicable
No

Review of pwr diss data
NOT REVIEWED

Component Regulatory Information

EU Importer Address
Rockwell Automation N.V
Pegasus Park
De Kleetlaan 12A
1831 Diegem
Belgium

EU Authorized Representative Address
Rockwell Automation N.V
Pegasus Park
De Kleetlaan 12A
1831 Diegem
Belgium

Also you can check product : New Allen Bradley ControlLogix 5580 Controller 1756-L84E

New Allen Bradley ControlLogix 5580 Controller 1756-L84E

The Allen Bradley 1756-L84E is a ControlLogix controller. It is part of the Programmable Automation Controller (PAC) family which features a user memory of 20MB with integrated One (1) Ethernet and One (1) USB communication ports. It is capable of interfacing 128,000 Discrete I/O and 4000 Analog I/O memory.

The Allen Bradley 1756-L84E is a ControlLogix controller. This controller belongs to the high-end controller with modern design and connectivity. This controller is ideally used for large applications as it can be used to interface and control Input and output devices, specifically, 128,000 Discrete Input and Outputs and 4000 Analog Inputs and Outputs.

It supports local I/O control as well as implementation of distributed I/O architecture utilizing one or more communication protocols such as EtherNet/IP, ControlNet, DeviceNet, Data Highway Plus, Remote I/O, SynchLink, and Third-party process and device networks

The 1756-L84E comes with integrated communication port such as One (1) Ethernet I/P. This embedded port supports 10/100/1000 Mbps transmission speed and may be used to communicate with Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA) and other controllers through messaging instructions within the same Ethernet network. The USB port is a USB 2.0 that supports 12 Mbps communication speed.

The 1756-L84E has a built-in user memory amounting to 20MB. An expansion non-volatile memory may be installed with the use of 1784-SD2 which is a 2GB Secure Digital (SD) card. This controller does not require a battery to retain the contents of the volatile memory as it comes with the modern energy storage solution, eliminating the need for use of batteries, making the controller user and environmentally friendly.

The 1756-L84E ControlLogix 5580 Controller by Allen Bradley is a high-performance controller with up to 128,000 I/O which enhance machine automation and increase performance. It comes with 20MB of user program storage memory and allows for expanded and long-term program storage via the optional pre-installed 2 GB Secure Digital Card (1784-SD2). Embedded on the controller is an energy storage module which removes the need for an extra battery and the entire controller draws a backplane current of 5mA at 1.2V DC and of 1.2mA at 5.1V DC. The 1756-L84E has an operational thermal dissipation of 21.2 BTU/hr, and provides 50V isolation between USB port-to-backplane, Ethernet port-to-backplane, and USB port-to-Ethernet port, utilizing basic insulation tested at 1000V AC for 1 minute. The controller fits into any 1756 Chassis slot and uses a single slot width. The number of tasks performed by the controller is unlimited through the local I/O event triggers mechanism and programming are achieved using the Studio 5000 Logix Designer Application Version 3.0 or greater. It also has a built-in embedded 1 GB Ethernet port which supports a maximum of 250 nodes and provides enhanced performance, wider communication, and integrated motion control on the EtherNet/IP network. The controller is designated the T4 temperature code and is IEC tested to operates at 0-60 deg. Celcius temperature range, and functions without de-rating at 5-95% non-condensing relative humidity limits. The 1756-L84E can withstand a shock of 30G and a vibration of 2G and the entire controller weighs approximately 0.394kg.

Specifications :

Specifications :

User memory
20Mb

Digital I/O
max 128,000

Analog I/O max
4000 Total

Total I/O max
128,000

Optional nonvolatile memory storage
2 GB Secure Digital Card (1784-SD2), ships pre-installed in the controller(1)

Energy storage Module
module Embedded in controller, nonremovable

Number of power cycles
80,000 Current

Current draw @ 1.2V DC
5.0 mA

Current draw 5.1V DC
1.20 A

Power dissipation
6.2 W

Thermal dissipation
21.2 BTU/hr\

Residual Stored Energy
Not Applicable

Isolation voltage
50V (continuous), Basic Insulation type, USB port to backplane, Ethernet port to backplane, and USB port to Ethernetport Compliant and tested according to IEC/UL 61010-1

Weight approx.
0.394 kg (.868 lb)

Slot width
1

Module location
Chassis-based, any slot

Chassis
1756-A4, 1756-A4K, 1756-A7, 1756-A7K, 1756-A10, 1756-A10K, 1756-A13, 1756-A13K, 1756-A17, 1756-A17 K Series B, Series C

Power supply, standard
1756-PA50, 1756-PA72, 1756-PA72K, 1756-PA75, 1756-PA75K, 1756-PB50, 1756-PB72, 1756-PB72K, 1756-PB75, 1756-PB75K, 1756-PH75, 1756-PC75

Power supply, redundan
1756-PA75R, 1756-PA75RK, 1756-PB75R, 1756-PB75RK, 1756-PSCA2, 1756-PSCA2K

Wire category(2)
3 - on USB port 2 - on Ethernet ports

Wire size
Ethernet connections: Ethernet cabling and installation according to IEC 61918 and IEC 61784-5-2

North American temperature code
T4

ATEX temperature code
T4

IECEx temperature code
T4

Enclosure type rating
None (open-style)

Also you can check product : NEW Allen Bradley PanelView Plus 7 Performance Graphic Terminal 2711P-T19C22D9P

NEW Allen Bradley PanelView Plus 7 Performance Graphic Terminal 2711P-T19C22D9P

Our Bulletin 2711P PanelView Plus 7 Graphic Terminals are available in standard and performance versions. Our performance versions are available in conformal coat, stainless steel and on-machine (ArmorView™ Plus 7) options, offering flexibility to meet your specific needs. You can use FactoryTalk® View Machine Edition to build your application, help simplify configuration and strengthen your Integrated Architecture solution. These terminals include Ethernet connectivity and enable you to monitor applications from remote locations with VNC server and FactoryTalk ViewPoint connectivity. 

PanelView Plus 7 Standard

Includes Windows CE 6.0 standard features and color TFT LCD, 18-bit color graphics
Offers display sizes from 4...15 in. with wide screen and on-screen keypad options
Allows monitoring of applications from a remote location with VNC connectivity and FactoryTalk ViewPoint
Uses an SD card or USB drive to quickly copy and restore your application
Includes email and texting notification capabilities
Includes 512 MB RAM and 512 MB nonvolatile memory (approximately 80 MB free user memory)
Offers 100 screens and 500 alarms when used with FactoryTalk Machine Edition software with connection to one controller
Offers Ethernet 1 x RJ45 10/100 MB Auto-MDI/MDI-X with IEEE 1588 support
Features single or DLR Ethernet ports for network connectivity
Includes option for Allen‑Bradley branded and brandless terminals

PanelView Plus 7 Performance

Includes Windows 10 IoT Core (LTSC) operating system and color TFT LCD, 18-bit color graphics
Offers display sizes from 7...19 in. with wide screen and keypad options
Includes video playback support, which provides advanced user help capabilities
Allows monitoring of applications from a remote location with VNC server connectivity and FactoryTalk ViewPoint
Uses an SD card or USB drive to quickly copy and restore the operator interface
Includes email and texting notification capabilities
Includes 4GB RAM and 20GB nonvolatile memory (approximately 2GB free user memory)
Features two Ethernet ports that support DLR, linear, or star network topologies
Includes option for Allen‑Bradley branded and brandless terminals
Conformally Coated Version

Available on all PanelView Plus 7 Performance versions with touch-only displays and 15 in. Keypad display
Severity Level GX per ANSI/ISA 71.04-2013
Stainless Steel Version

Offers brandless display in 9, 10, 12, and 15 in. sizes
Features 316 stainless steel bezel
Includes replaceable blue food-grade silicone gasket
Includes conformal coating
Features NSF certification
UL IP69 rated and tested to IP69K according to ISO 20653

ArmorView Plus 7 Version

Offers 12 in. display size in a fully self-enclosed panel
Features IP66 protection for a cabinet-free HMI solution
Offers sixteen standard button plate configurations
Includes option to individually customize buttons and switches, plus a hard-wired E-stop
Features options to increase flexibility, including orientation mount options from either a swing arm, pedestal, or fixed surface

Specifications :

Display Size

7 inch display (170 x 212 mm)
9 inch display (190 x 280 mm)
10 inch display (252 x 297 mm)
12 inch display (240 x 340 mm)
15 inch display (318 x 381 mm)
19 inch display (411 x 485 mm)

Display Type
Windows 10 IoT Core (LTSC)

RAM
4 GB

Real-time clock
Yes, battery-backed time clock time stamps critical data. Accuracy /-2 minutes per month

Operating Temperature
0…55 °C (32…131 °F)

Certifications
C-UL-us listed 
Class I, Div 2, Groups A,B,C,D, T4
Class II, Div 2, Groups F, G; Class III
KCC
CE (EMC)
CE (LVD)
RoHS
EAC
Morocco
NSF (stainless-steel only)

Conformally Coated
Available for 9, 10, 12, and 15 inch displays

SD
1 x SDHC

USB
1 USB high-speed 3.0 port (Type A) and 1 USB 2.0 (Type A)

Ethernet
Either 1 RJ45 10/100 MB port or 2 10/100Base-T Auto MDI/MDIX Ethernet ports that support DLR, linear or star network topologies

Input Power
DC (18...30V DC)

Standard Software
FactoryTalk® View Studio for Machine Edition, FactoryTalk ViewPoint, version 2.6 or later

Also you can check product : NEW Allen Bradley PanelView 5510 Graphic Terminal 2715P-B15CD