USED Acoem Hawk Oneprod HAPT2069C Vibration Analysis

EASY TO GET STARTED
- Easy to incorporate in your current maintenance practices
- Plug & Play

AUTOMATIC DIAGNOSIS IN THE FIELD
- No specialized vibration knowledge needed
- Instant results beside the machine
- Improved productivity of all repair actions
- If needed, easily get the advice of an ONEPROD expert

WIRELESS MEASUREMENT
- Personnel safety
- User comfort
- No measurement errors due to poor cable condition

FAST & RELIABLE BALANCING OPTION
- Step by step procedure
- Automatic trial-weight recommendation
- Automatic balancing grade assessment
- Automatic ISO standards comparison

SPECS :

Touchscreen
Graphic colour touchscreen
Resolution: 800x480 pixels
Dimension: 154x92 mm (D7”)
Adjustable brightness
Can be used outdoors
Icon functions

Touch keyboard
On touchscreen:
10 contextual function keys
Functions are organised for single-hand
measurement (left or right)
Direct access to general functions: Home, Help, Setup, Screen copy, Picture, Bar code
reader, Text note, Audio comment, Pyrometer, Stroboscope
Full keyboard for text input. Several
keyboards available: qwerty, azerty, Chinese…

Acquisition
Synchronous on 4 channels trigger input
24-bits conversion
Sampling frequency:
102.4 kHz for each channel
Up to 204.8 kHz on 1 channel
Antialiasing filter
Wireless acquisition with HAWK WLS triaxial
accelerometer
Digital signal processors
Real-time processing:
40 kHz on 4 channels
Up to 80 kHz on 2 channels
Memory: 3.5 GB for measurements

Communication
USB 2 type B device (direct connection to PC)
USB 2 type A host (for USB stick)
Ethernet
Wi-Fi
Battery
Auto test and calibration function
High density Li-Ion type
Rechargeable without removing
Battery lifetime: 10 hours under intense use
Programmable automatic standby mode and switch-off

Analogue Inputs
Up to 4 programmable signal inputs (depending on
instrument option):
 Frequency range: 0 - 40 kHz on 4 channels,
80 kHz on 1 channel
 Overload indicator in % with memorisation
 IEPE interface with real time integrity control,
range  8V (power supply: 4 mA constant
current 23 VDC)
 Dynamic signal measurements (acceleration,
vibration velocity, absolute displacement,
relative displacement, electrical current, etc.)
o /- 10 VAC
o 0, -24 V for proximity probes (a -
24Vdc power supply is available
on each channel)
Input impedance AC/DC: 100 kΩ
Accuracy: /- 1%
Sensors without electronics with optional
charge amplifier
DC input: from -24 VDC to 24 VDC for
measurements of position and process
parameters
AC coupling: 0.3 Hz
Compatible with triaxial sensor

Trigger input:
Range: /- 10 V, 0 to 24 V, 0 to – 24 V
Adjustable triggering parameters
Automatic setup function
For rotation speed measurement, synchronous analysis,
balancing, order analysis.
Input impedance: 100 kΩ
5 Vdc power supply for tacho probe
-24 Vdc power supply for proximity probes

Microphone input
Microphone input for audio inspection notes
ANALOGUE OUTPUTS
1 headphone output to listen sensor signal, recorded
signal or audio inspection notes
1 stroboscope output: TTL
For each channel and trigger input:
-24 Vdc power supply for proximity probe

BUILT-IN PYROMETER WITH LASER-SIGHTING
Contactless temperature measurement:
Range: 0 to 200°C
Accuracy: /- 3°C for ambient temperature
ranging from 18°C to 28°C.
Resolution: 0.5°C
Repeatability: /- 1°C
Field of view: 5° @ 50%
( target ≃ 4 cm @ 50 cm)
Time response: 1 s
Fixed emissivity: 95%

BUILT-IN STROBOSCOPE
Rotation speed measurement:
Range: 30 to 15000 RPM
Automatic setting to machine speed predefined in setup
Adjustment:
 ½, x2
Fast
Fine
Flash duration : adjustable from 0.5 to 15°
Can be used independently or to adjust rotation speed in a route or from a spectrum display

Built-in camera
Resolution: 640 x 480
Autofocus
Distance: 20 cm to
Flash mode
Identification of measurement point
Built-in bar code reader
Reading distance: from 20 cm to 50 cm according to code dimension
Bar code format: QRcode
Learning mode to avoid codes manual input

Mechanical/environment
Protection: IP65.
Case with shock protection rubber
Shock protection: 1.2 m drop (1m for EX version)
Standard compliance:
Safety: IEC61010-1
EMC: directive 2004-108-CE
Dimensions: 200 x 265 x 65 mm
Weight: 1.8 kg including battery and rubber protection
Operating temperature: -10°C to 55°C
Humidity: 95% no condensation

HAWK-EX, intrinsically safe version:
ATEX certification : EX II 3 G, EEx ic IIC T4 supplied with
certified accessories.
IECEX certification (pending)
Note: shock protection: 1m drop. The protection screen accessory cannot be used in dangerous area and is not
supplied.

Remote access
HAWK can be set up so as to communicate with your network through its Ethernet or Wi-Fi interface and used
as a remote station. You can then use the applications installed on your computer directly from HAWK (SUPERVISION, CMMS…).

Also you can check product : NEW Acoem RT-300 Shaft Alignment Tool and Condition Monitoring

• Availability: 9 In Stock
• Model: Acoem Hawk Oneprod HAPT2069C
• Brand: