Pruftechnik
The ROTALIGN touch is the most powerful laser shaft alignment platform on the market. The ROTALIGN touch truly is unique. Let's find out how the leading laser shaft alignment system delivers the best measurement accuracy while offering the most innovative features that save you time and effort.
PRÜFTECHNIK have created the Optalign Smart EX for industrial applications. The intrinsically safe laser shaft alignment equipment can be used in extreme working conditions. Optalign Smart EX is a sought after measurment system for the maintenance of gear boxes, pump, motors and a variety of rotating machinery for intrinsically safe areas. The light weight machine with Bluetooth capabilites makes the perfect solution for your intrinsically safe laser alignment needs.
ROTALIGN touch is the first cloud-enabled touchscreen laser shaft alignment system with integrated mobile connectivity.
With ROTALIGN touch, alignment trend is fully integrated into your asset management and condition-based maintenance programs.
Maintenance and Reliability managers can remotely prepare alignment jobs in the alignment software and connect to the Cloud to transfer them to a ROTALIGN® touch device, anywhere in the world.
Optalign Touch delivers unrivaled precision and easy-of-use with cutting edge technology from the old pros in laser alignment, Prüftechnik.
OPTALIGN touch was designed by some of the world’s leading alignment experts to solve problems in the easiest way possible. Featuring the unique sensALIGN 5 laser and sensor heads, it enables powerful, fast, and efficient ways to align machine shafts.
The new ShaftAlign Touch is a rugged laser alignment system that provides digital, cloud, and other advancements over the decades-old but still widely used dial indicator and feeler gauge. ShaftAlign Touch is a combination of software and hardware innovations enabling maintenance teams to address a wide variety of alignment challenges that basic laser alignment systems cannot handle.
User-friendly interface that guides users on how to measure and align machinery
Single laser technology provides highly accurate measurements every time
Allows simultaneous real-time machine corrections in both horizontal and vertical directions
Automatic collection of alignment data during shaft rotation
WiFi and Bluetooth connectivity for easy measurement sharing and team collaboration
Covered by Fluke Reliability Extended Warranty Program
The Only Adaptive Laser Shaft Alignment System for EX areas.Intrinsically safe , Adaptability saves time and effort, Best measurement accuracy and repeatability, Fluke Reliability Extended Warranty Program.
Advanced vertical machine alignment with vertiSWEEP continuous measurement mode, ALIGNMENT RELIABILITY CENTER 4.0 PC software including auto-activation and PDF reporting, Mobile connectivity with integrated Wi-Fi, Bluetooth, RFID and camera, ATEX/IECEx Zone 1 certified including ruggedized IP68 tablet device
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues. This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
VIBXPERT EX records all types of machine vibrations, bearing conditions as well as process and visual inspection data, and transfers this information to the OMNITREND maintenance software for evaluation, archiving and documentation.
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis. The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine.
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.VIBXPERT EX collects field data including vibration information, bearing condition, inspection and process data and seamlessly integrates with the OMNITREND Center software platform for in-depth analysis.
The Rotalign Ultra iS, the highly versatile laser shaft alignment system by Pruftechnik, will help to reduce machine downtime, increase machine efficiency, increase productivity, lower energy costs and therefore save money. Ideal for internal combustion engines, piston compressors, crosshead guides, pumps, stern tubes and extruder barrels. Align steam and gas turbine internals, bearing rings, diaphragms, inner shells and casings.
The VibXpert 3 Balancer is an advanced smart condition monitoring field balancing tool that enables users to quickly and effectively correct unbalance faults. Increase the reliability of their machinery by reducing excessive machine vibration levels. Improve safety by reducing potential equipment hazards, Improve uptime by promptly identifying and correcting unbalance, Help meet industry standards and regulatory compliance requirements, Improve energy efficiency of rotating machinery, providing cost savings, Maximize the efficiency, quality, and accuracy of field balancing jobs.
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
USED Pruftechnik Rotalign Touch Laser Shaft Alignment System (Rotalign Touch)
The ROTALIGN touch is the most powerful laser shaft alignment platform on the market. The ROTALIGN touch truly is unique. Let's find out how the leading laser shaft alignment system delivers the best measurement accuracy while offering the most innovative features that save you time and effort.
Features:
Intelligent measurement modes including uncoupled intelliPASS and intelliPOINT
Cardan shaft alignment with cardan in place
Vertical machine alignment with vertiSWEEP continuous measurement mode
Softfoot diagnostics
Live Trend
Horizontal and Vertical move simulator
Measurement table including different alignment jobs
Machine train with real 3D machines
Real time Intelligent measurement quality
Customized tolerances (even asymetrical)
SPECS :
CPU
Processor: 1.0 GHz quad core ARM®Cortex-A9
Memory: 2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory
Display
Technology: Projective capacitive multi-touch screen
Type: Transmissive (sunlight-readable) backlit TFT color graphic display Optically bonded, protective industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel Dimensions: 178 mm (7”) diagonal
LED indicators
3 LEDs for battery status, 1 LED for WiFi communication
Power supply
Operating time: 12 hours typical use (based upon an operating cycle of 25% measurement, 25% computation, 50% ‘sleep’ mode)
Battery: Lithium-ion rechargeable battery 3.6 V / 80 Wh AC adapter/charger: 12 V / 36 W; standard barrel connector (5.5 x 2.1 x 11 mm)
External interface
USB host for memory stick USB slave for PC communication, charging (5 V DC / 1.5 A) RS-232 (serial) for sensor, RS-485 (serial) for sensor I-Data for sensor Integrated Bluetooth® wireless communication (covers direct line of sight distances of up to 30 m / 100 ft depending on the prevailing envir-onmental conditions) Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps (depending on configuration) Integrated RFID with read and write capabilities (depending on con-figuration)
Environmental protection
IP 65 (dustproof and water jets resistant) – as defined in regulation DIN EN 60529 (VDE 0470-1), shockproof Relative humidity: 10% to 90%
Drop test
1 m (3 1/4 ft)
Temperature range
Operation: 0°C to 40°C (32°F to 104°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 50°C (14°F to 122°F)
Dimensions
Approx. 273 x 181 x 56 mm (10 3/4” x 7 1/8” x 2 3/16”)
Weight
Approx. 1.88 kg (4.1 lbs)
Camera
5 MP built-in (depending on configuration) LEDs: Risk Group 1 according to IEC 62471:2006
CE conformity
Refer to the CE compliance certificate in www.pruftechnik.com
FCC compliance
Requirements fulfilled (refer to the provided document ‘Safety and gen-eral information’)
INCLUDED :
Pruftechnik Rotalign Touch Laser Shaft Alignment System (BC# -L/T*)
Rotalign SensALIGN Laser
Rotalign SensALIGN Receiver
(2) Chain Brackets
Tape Measurer
Carrying Case (G)
MEMS inclinometers
Also you can check product : USED Pruftechnik Rotalign Ultra IS Laser Shaft Alignment System
Features:
Intelligent measurement modes including uncoupled intelliPASS and intelliPOINT
Cardan shaft alignment with cardan in place
Vertical machine alignment with vertiSWEEP continuous measurement mode
Softfoot diagnostics
Live Trend
Horizontal and Vertical move simulator
Measurement table including different alignment jobs
Machine train with real 3D machines
Real time Intelligent measurement quality
Customized tolerances (even asymetrical)
SPECS :
CPU
Processor: 1.0 GHz quad core ARM®Cortex-A9
Memory: 2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory
Display
Technology: Projective capacitive multi-touch screen
Type: Transmissive (sunlight-readable) backlit TFT color graphic display Optically bonded, protective industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel Dimensions: 178 mm (7”) diagonal
LED indicators
3 LEDs for battery status, 1 LED for WiFi communication
Power supply
Operating time: 12 hours typical use (based upon an operating cycle of 25% measurement, 25% computation, 50% ‘sleep’ mode)
Battery: Lithium-ion rechargeable battery 3.6 V / 80 Wh AC adapter/charger: 12 V / 36 W; standard barrel connector (5.5 x 2.1 x 11 mm)
External interface
USB host for memory stick USB slave for PC communication, charging (5 V DC / 1.5 A) RS-232 (serial) for sensor, RS-485 (serial) for sensor I-Data for sensor Integrated Bluetooth® wireless communication (covers direct line of sight distances of up to 30 m / 100 ft depending on the prevailing envir-onmental conditions) Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps (depending on configuration) Integrated RFID with read and write capabilities (depending on con-figuration)
Environmental protection
IP 65 (dustproof and water jets resistant) – as defined in regulation DIN EN 60529 (VDE 0470-1), shockproof Relative humidity: 10% to 90%
Drop test
1 m (3 1/4 ft)
Temperature range
Operation: 0°C to 40°C (32°F to 104°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 50°C (14°F to 122°F)
Dimensions
Approx. 273 x 181 x 56 mm (10 3/4” x 7 1/8” x 2 3/16”)
Weight
Approx. 1.88 kg (4.1 lbs)
Camera
5 MP built-in (depending on configuration) LEDs: Risk Group 1 according to IEC 62471:2006
CE conformity
Refer to the CE compliance certificate in www.pruftechnik.com
FCC compliance
Requirements fulfilled (refer to the provided document ‘Safety and gen-eral information’)
INCLUDED :
Pruftechnik Rotalign Touch Laser Shaft Alignment System (BC# -L/T*)
Rotalign SensALIGN Laser
Rotalign SensALIGN Receiver
(2) Chain Brackets
Tape Measurer
Carrying Case (G)
MEMS inclinometers
Also you can check product : USED Pruftechnik Rotalign Ultra IS Laser Shaft Alignment System
The ROTALIGN touch is the most powerful laser shaft alignment platform on the market. The ROTALIGN touch truly is unique. Let's find out how the leading laser shaft alignment system delivers the best measurement accuracy while offering the most innovative features that save you time and effort.
USED Pruftechnik Optalign Smart EX Laser Shaft Alignment (Optalign Smart EX)
PRÜFTECHNIK have created the Optalign Smart EX for industrial applications. The intrinsically safe laser shaft alignment equipment can be used in extreme working conditions. Optalign Smart EX is a sought after measurment system for the maintenance of gear boxes, pump, motors and a variety of rotating machinery for intrinsically safe areas. The light weight machine with Bluetooth capabilites makes the perfect solution for your intrinsically safe laser alignment needs.
System and case fully ATEX / IECEX certified
Alignment of horizontal, vertical and flange-mounted machines, coupled and uncoupled shafts
Hundreds of positions are automatically measured during shaft rotation (SWEEP)
Automatic evaluation of alignment condition with smiley symbols (TolCheck) and user-defined tolerances
Live monitoring of horizontal and vertical machine corrections
Save PDF measurement reports directly to a USB stick: no PC required.
Wireless data transfer via Bluetooth module (optional).
SPECS :
Computer
CPU
Marvell PXA270 running at 312 MHz
Memory
64 MB RAM, 32 MB Flash
Display
Type: TFT, transflective (sunlight-readable), 65 535 colours,backlit LED
Resolution: 320 x 240 Pixel; Dimensions: 3.5 inch diagonal
Keyboard elements: Navigation cursor cross with up, clear and menu keys; Alphanumeric keyboard with dimensions,measure and results hard keys
LED indicators
4 LEDs for laser status and alignment condition
2 LEDs for wireless communication and battery status
Power supply
Operating time: 18 hours typical use
(based upon an operating cycle of 25% measurement, 25% computation and 50% ‘sleep’ mode)
Disposable batteries: 6 x 1.5 V IEC LR6 (“AA“)
1.5 V “AA” MN 1500 from Duracell or AccuCell AC 1800 rechargeable batteries
External interface
USB host
USB slave
RS232 (serial) for transducer
Integrated wireless communication, class 1, transmitting power 100 mW
AC adapter/charger socket
Environmental protection
IP 65 (dustproof and water spray resistant), shockproof
Relative humidity 10% to 90%
Intrinsic safety
II 2 G Ex ib [ib] IIC T4, Zone 1
Certificate numbers: TÜV 08 ATEX 554162, IECEx TUN 08.0006
Temperature range
Operation: -10°C to 50°C [14°F to 122°F]
Storage: -20°C to 60°C [-4°F to 140°F]
Dimension
Approx. 214 x 116 x 64 mm [8 7/16” x 2 1/2”]
Weight
865 g [1.9 lb]
CE conformity
EC guidelines for electric devices (2004/108 EWG) are fulfilled
Transducer
Particulars Measurement principle: Coaxial, reflected laser beam
Environmental protection: IP 67 (submersible, dustproof)
Ambient light protection: yes
Storage temperature: -20°C to 80°C [-4°F to 176°F]
Operating temperature: 0°C to 55°C [32°F to 131°F]
Dimensions: approx.
107 x 70 x 49 mm [4 1/4” x 2 3/4” x 2”]
Weight: approx. 177 g [6 1/2 oz.]
Intrinsic safety
II 2 G Ex ib op isb IIC T4, Zone 1
Certificate numbers:TÜV 07 ATEX 554148, IECEx TUN 08.0003
Laser
Type: Ga-Al-As semiconductor laser
Wavelength (typical) 675 nm (red, visible)
Safety class: Class 2, FDA 21 CFR 1000 and 1040
Beam power: < 1 mW
Safety precautions: Do not look into laser beam
Detector
Measurement area: unlimited, dynamically extendible
(U.S. Patent 6,040,903)
Resolution: 1 µm; Accuracy (avg): > 98%
Inclinometer
Measurement range: 0° to 360°; Resolution: <1°
Reflector
Type: 90° roof prism; Accuracy (avg): > 99%
Environmental protection: IP 67 (submersible, dustproof)
Storage temperature: -20°C to 80°C [-4°F to 176°F]
Operating temperature: -20°C to 60°C [-4°F to 140°F]
Dimensions: approx. 100 x 41 x 35 mm
[4” x 1 5/8” x 1 3/8”]
Weight: approx. 65 g [2 1/2 oz.]
Carrying case
Standard: ABS, drop tested 2 m [6 1/2 ft])
Case dimensions: approx. 470 x 400 x 195 mm
[18 1/2” x 15 3/4” x 7 3/4”]
Weight, including all standard parts:
approx. 5.8 kg [12.8 lb]
Wireless technology
For wireless communication
with transducer (optional)
Class 1 connectivity, transmitting power 100 mW
Transmission distance: 10 m [33 ft.]
Complies with FCC rules part 15.247
Also you can check product : USED Pruftechnik Rotalign Ultra IS Laser Shaft Alignment System
System and case fully ATEX / IECEX certified
Alignment of horizontal, vertical and flange-mounted machines, coupled and uncoupled shafts
Hundreds of positions are automatically measured during shaft rotation (SWEEP)
Automatic evaluation of alignment condition with smiley symbols (TolCheck) and user-defined tolerances
Live monitoring of horizontal and vertical machine corrections
Save PDF measurement reports directly to a USB stick: no PC required.
Wireless data transfer via Bluetooth module (optional).
SPECS :
Computer
CPU
Marvell PXA270 running at 312 MHz
Memory
64 MB RAM, 32 MB Flash
Display
Type: TFT, transflective (sunlight-readable), 65 535 colours,backlit LED
Resolution: 320 x 240 Pixel; Dimensions: 3.5 inch diagonal
Keyboard elements: Navigation cursor cross with up, clear and menu keys; Alphanumeric keyboard with dimensions,measure and results hard keys
LED indicators
4 LEDs for laser status and alignment condition
2 LEDs for wireless communication and battery status
Power supply
Operating time: 18 hours typical use
(based upon an operating cycle of 25% measurement, 25% computation and 50% ‘sleep’ mode)
Disposable batteries: 6 x 1.5 V IEC LR6 (“AA“)
1.5 V “AA” MN 1500 from Duracell or AccuCell AC 1800 rechargeable batteries
External interface
USB host
USB slave
RS232 (serial) for transducer
Integrated wireless communication, class 1, transmitting power 100 mW
AC adapter/charger socket
Environmental protection
IP 65 (dustproof and water spray resistant), shockproof
Relative humidity 10% to 90%
Intrinsic safety
II 2 G Ex ib [ib] IIC T4, Zone 1
Certificate numbers: TÜV 08 ATEX 554162, IECEx TUN 08.0006
Temperature range
Operation: -10°C to 50°C [14°F to 122°F]
Storage: -20°C to 60°C [-4°F to 140°F]
Dimension
Approx. 214 x 116 x 64 mm [8 7/16” x 2 1/2”]
Weight
865 g [1.9 lb]
CE conformity
EC guidelines for electric devices (2004/108 EWG) are fulfilled
Transducer
Particulars Measurement principle: Coaxial, reflected laser beam
Environmental protection: IP 67 (submersible, dustproof)
Ambient light protection: yes
Storage temperature: -20°C to 80°C [-4°F to 176°F]
Operating temperature: 0°C to 55°C [32°F to 131°F]
Dimensions: approx.
107 x 70 x 49 mm [4 1/4” x 2 3/4” x 2”]
Weight: approx. 177 g [6 1/2 oz.]
Intrinsic safety
II 2 G Ex ib op isb IIC T4, Zone 1
Certificate numbers:TÜV 07 ATEX 554148, IECEx TUN 08.0003
Laser
Type: Ga-Al-As semiconductor laser
Wavelength (typical) 675 nm (red, visible)
Safety class: Class 2, FDA 21 CFR 1000 and 1040
Beam power: < 1 mW
Safety precautions: Do not look into laser beam
Detector
Measurement area: unlimited, dynamically extendible
(U.S. Patent 6,040,903)
Resolution: 1 µm; Accuracy (avg): > 98%
Inclinometer
Measurement range: 0° to 360°; Resolution: <1°
Reflector
Type: 90° roof prism; Accuracy (avg): > 99%
Environmental protection: IP 67 (submersible, dustproof)
Storage temperature: -20°C to 80°C [-4°F to 176°F]
Operating temperature: -20°C to 60°C [-4°F to 140°F]
Dimensions: approx. 100 x 41 x 35 mm
[4” x 1 5/8” x 1 3/8”]
Weight: approx. 65 g [2 1/2 oz.]
Carrying case
Standard: ABS, drop tested 2 m [6 1/2 ft])
Case dimensions: approx. 470 x 400 x 195 mm
[18 1/2” x 15 3/4” x 7 3/4”]
Weight, including all standard parts:
approx. 5.8 kg [12.8 lb]
Wireless technology
For wireless communication
with transducer (optional)
Class 1 connectivity, transmitting power 100 mW
Transmission distance: 10 m [33 ft.]
Complies with FCC rules part 15.247
Also you can check product : USED Pruftechnik Rotalign Ultra IS Laser Shaft Alignment System
PRÜFTECHNIK have created the Optalign Smart EX for industrial applications. The intrinsically safe laser shaft alignment equipment can be used in extreme working conditions. Optalign Smart EX is a sought after measurment system for the maintenance of gear boxes, pump, motors and a variety of rotating machinery for intrinsically safe areas. The light weight machine with Bluetooth capabilites makes the perfect solution for your intrinsically safe laser alignment needs.
NEW Pruftechnik ROTALIGN Touch Laser Shaft Alignment System (ROTALIGN Touch)
Pruftechnik Rotalign Touch Shaft Alignment System
ROTALIGN touch is the first cloud-enabled touchscreen laser shaft alignment system with integrated mobile connectivity.
With ROTALIGN touch, alignment trend is fully integrated into your asset management and condition-based maintenance programs.
Maintenance and Reliability managers can remotely prepare alignment jobs in the alignment software and connect to the Cloud to transfer them to a ROTALIGN touch device, anywhere in the world. Alignment technicians receive alignment jobs directly on their ROTALIGN touch device. Once completed, the jobs can be uploaded wirelessly back to the Cloud.
A direct connection from the ROTALIGN touch to the alignment software is also possible.
Built-in RFID machine identification and asset-specific jobs make it possible to track the alignment condition of individual assets over time. The alignment trend provides meaningful information and can be used as a condition monitoring parameter to diagnose machine condition even more accurately.
With the onboard camera alignment reports can easily be supplemented with pictures for easier knowledge transfer.
Intelligent features for shaft alignment - 100% Precision - 0% Error
The unique intelliSWEEP® sensor technology enables continuous measurements and real-time quality for precise, accurate and repeatable results. The intelliSWEEP® HD measurement mode automatically detects and eliminates sources of measurement errors such as coupling play, rotational angle or environmental vibration.
As shaft rotates, hundreds of real measurement points are taken automatically. The results are far more accurate than those based on 3 measurement positions.
Features:
Intelligent measurement modes including uncoupled intelliPASS and intelliPOINT
Cardan shaft alignment with cardan in place
Vertical machine alignment with vertiSWEEP continuous measurement mode
Softfoot diagnostics
Live Trend
Horizontal and Vertical move simulator
Measurement table including different alignment jobs
Machine train with real 3D machines
Real time Intelligent measurement quality
Customized tolerances (even asymetrical)
Specifications:
CPU
Processor: 1.0 GHz quad core ARM®Cortex-A9
Memory: 2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory
Display
Technology: Projective capacitive multi-touch screen
Type: Transmissive (sunlight-readable) backlit TFT color graphic display Optically bonded, protective industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel Dimensions: 178 mm (7”) diagonal
LED indicators
3 LEDs for battery status, 1 LED for WiFi communication
Power supply
Operating time: 12 hours typical use (based upon an operating cycle of 25% measurement, 25% computation, 50% ‘sleep’ mode)
Battery: Lithium-ion rechargeable battery 3.6 V / 80 Wh AC adapter/charger: 12 V / 36 W; standard barrel connector (5.5 x 2.1 x 11 mm)
External interface
USB host for memory stick USB slave for PC communication, charging (5 V DC / 1.5 A) RS-232 (serial) for sensor, RS-485 (serial) for sensor I-Data for sensor Integrated Bluetooth® wireless communication (covers direct line of sight distances of up to 30 m / 100 ft depending on the prevailing envir-onmental conditions) Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps (depending on configuration) Integrated RFID with read and write capabilities (depending on con-figuration)
Environmental protection
IP 65 (dustproof and water jets resistant) – as defined in regulation DIN EN 60529 (VDE 0470-1), shockproof Relative humidity: 10% to 90%
Drop test
1 m (3 1/4 ft)
Temperature range
Operation: 0°C to 40°C (32°F to 104°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 50°C (14°F to 122°F)
Dimensions
Approx. 273 x 181 x 56 mm (10 3/4” x 7 1/8” x 2 3/16”)
Weight
Approx. 1.88 kg (4.1 lbs)
Camera
5 MP built-in (depending on configuration) LEDs: Risk Group 1 according to IEC 62471:2006
CE conformity Refer to the CE compliance certificate in pruftechnik
FCC compliance
Requirements fulfilled (refer to the provided document ‘Safety and gen-eral information’)
INCLUDED :
Pruftechnik Rotalign Touch Laser Shaft Alignment System (BC# -L/T*)
Rotalign SensALIGN Laser
Rotalign SensALIGN Receiver
(2) Chain Brackets
Tape Measurer
Carrying Case (G)
Also you can check product : USED Pruftechnik Optalign Smart EX Laser Shaft Alignment
ROTALIGN touch is the first cloud-enabled touchscreen laser shaft alignment system with integrated mobile connectivity.
With ROTALIGN touch, alignment trend is fully integrated into your asset management and condition-based maintenance programs.
Maintenance and Reliability managers can remotely prepare alignment jobs in the alignment software and connect to the Cloud to transfer them to a ROTALIGN touch device, anywhere in the world. Alignment technicians receive alignment jobs directly on their ROTALIGN touch device. Once completed, the jobs can be uploaded wirelessly back to the Cloud.
A direct connection from the ROTALIGN touch to the alignment software is also possible.
Built-in RFID machine identification and asset-specific jobs make it possible to track the alignment condition of individual assets over time. The alignment trend provides meaningful information and can be used as a condition monitoring parameter to diagnose machine condition even more accurately.
With the onboard camera alignment reports can easily be supplemented with pictures for easier knowledge transfer.
Intelligent features for shaft alignment - 100% Precision - 0% Error
The unique intelliSWEEP® sensor technology enables continuous measurements and real-time quality for precise, accurate and repeatable results. The intelliSWEEP® HD measurement mode automatically detects and eliminates sources of measurement errors such as coupling play, rotational angle or environmental vibration.
As shaft rotates, hundreds of real measurement points are taken automatically. The results are far more accurate than those based on 3 measurement positions.
Features:
Intelligent measurement modes including uncoupled intelliPASS and intelliPOINT
Cardan shaft alignment with cardan in place
Vertical machine alignment with vertiSWEEP continuous measurement mode
Softfoot diagnostics
Live Trend
Horizontal and Vertical move simulator
Measurement table including different alignment jobs
Machine train with real 3D machines
Real time Intelligent measurement quality
Customized tolerances (even asymetrical)
Specifications:
CPU
Processor: 1.0 GHz quad core ARM®Cortex-A9
Memory: 2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory
Display
Technology: Projective capacitive multi-touch screen
Type: Transmissive (sunlight-readable) backlit TFT color graphic display Optically bonded, protective industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel Dimensions: 178 mm (7”) diagonal
LED indicators
3 LEDs for battery status, 1 LED for WiFi communication
Power supply
Operating time: 12 hours typical use (based upon an operating cycle of 25% measurement, 25% computation, 50% ‘sleep’ mode)
Battery: Lithium-ion rechargeable battery 3.6 V / 80 Wh AC adapter/charger: 12 V / 36 W; standard barrel connector (5.5 x 2.1 x 11 mm)
External interface
USB host for memory stick USB slave for PC communication, charging (5 V DC / 1.5 A) RS-232 (serial) for sensor, RS-485 (serial) for sensor I-Data for sensor Integrated Bluetooth® wireless communication (covers direct line of sight distances of up to 30 m / 100 ft depending on the prevailing envir-onmental conditions) Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps (depending on configuration) Integrated RFID with read and write capabilities (depending on con-figuration)
Environmental protection
IP 65 (dustproof and water jets resistant) – as defined in regulation DIN EN 60529 (VDE 0470-1), shockproof Relative humidity: 10% to 90%
Drop test
1 m (3 1/4 ft)
Temperature range
Operation: 0°C to 40°C (32°F to 104°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 50°C (14°F to 122°F)
Dimensions
Approx. 273 x 181 x 56 mm (10 3/4” x 7 1/8” x 2 3/16”)
Weight
Approx. 1.88 kg (4.1 lbs)
Camera
5 MP built-in (depending on configuration) LEDs: Risk Group 1 according to IEC 62471:2006
CE conformity Refer to the CE compliance certificate in pruftechnik
FCC compliance
Requirements fulfilled (refer to the provided document ‘Safety and gen-eral information’)
INCLUDED :
Pruftechnik Rotalign Touch Laser Shaft Alignment System (BC# -L/T*)
Rotalign SensALIGN Laser
Rotalign SensALIGN Receiver
(2) Chain Brackets
Tape Measurer
Carrying Case (G)
Also you can check product : USED Pruftechnik Optalign Smart EX Laser Shaft Alignment
ROTALIGN touch is the first cloud-enabled touchscreen laser shaft alignment system with integrated mobile connectivity.
With ROTALIGN touch, alignment trend is fully integrated into your asset management and condition-based maintenance programs.
Maintenance and Reliability managers can remotely prepare alignment jobs in the alignment software and connect to the Cloud to transfer them to a ROTALIGN® touch device, anywhere in the world.
NEW Pruftechnik OPTALIGN Touch Laser Shaft Alignment SYstem (OPTALIGN Touch)
OptAlign Touch delivers unrivaled precision and easy-of-use with cutting edge technology from the old pros in laser alignment, Prüftechnik.
Simplified high-precision alignment: Geared towards standard alignment tasks, ideal for users who need a reliable, straightforward solution for routine alignment jobs.
User-friendly: Features an intuitive touchscreen interface with guided procedures, making complex alignment tasks more accessible to users of different skill levels (WiFi & Bluetooth connected)
Powerful software: OptAlign provides essential analysis tools for standard alignment tasks, focusing on streamlined monitoring, trending, and reporting, along with simplified data-handling
Machine train alignment: 3 machines
Measurement modes: The system offers various measurement modes, including single-point, multi-point, and continuous sweep, to accommodate different alignment scenarios.
Soft foot detection: OptAlign helps identify and correct soft foot conditions, a critical step for ensuring proper machine alignment and operation.
Active Situational Intelligence (ASI): This feature automatically adjusts to the alignment situation, providing real-time feedback and guidance to enhance the alignment process.
Live Move: OptAlign offers Live Move functionality in both vertical and horizontal planes, enabling real-time adjustments and immediate feedback during the alignment process.
Pre-defined machine templates: The system includes a variety of pre-defined machine templates, streamlining the setup process for common types of machinery.
Thermal growth compensation: Allows users to input target values for thermal growth, ensuring that machines are aligned correctly at all operating temperatures.
Intelligent reporting: Generates detailed reports that document the alignment process, results, and recommendations, aiding in compliance and maintenance planning.
Robust hardware: Designed with IP65 industrial-grade materials, making it suitable for harsh working environments and ensuring durability and longevity.
Fluke Reliability extended warranty: Gain peace of mind, convenience, device accuracy, and savings on service costs via 2 – 5 year mfg. warranty, 3 free calibrations, and 15% discount on repairs.
OPTALIGN touch was designed by some of the world’s leading alignment experts to solve problems in the easiest way possible. Featuring the unique sensALIGN 5 laser and sensor heads, it enables powerful, fast, and efficient ways to align machine shafts.
Designed for standard machines and everyday tasks, OPTALIGN touch combines hardware, software, and WiFi connectivity to deliver precise alignment data via the cloud. Its intuitively guided user interface can be operated by almost anyone – users just need to follow the three steps for any laser shaft alignment procedure: dimensions, measure, and result.
Benefits:
Work faster without sacrificing accuracy
With intuitive setup and data acquisition and an easy-to-use handheld device, even complex alignment jobs can be done quickly with no loss in accuracy and precision.
Leverage advanced laser shaft alignment capabilities
The powerful hardware and software features in the OPTALIGN touch simplify the way you perform mounting, measuring, and shimming.
With mistake-correcting capabilities, this tool adapts to both the alignment challenge and experience level of the user.
Transfer data to and from the cloud
Send and receive alignment data from and to the ARC 4.0 PC software via an integrated WiFi connection. Monitor and trend your data for analysis and action.
SPECS :
CPU
1.0 GHz quad core ARM Cortex-A9
Memory Memory
2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory
Display
Projective capacitive multi-touchscreen
Transmissive (sunlight-readable) backlit TFT color graphic display; optically bonded, protective
industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel
Dimensions: 178 mm (7”) diagonal
LED indicators
3 LEDs for battery status
1 LED for WiFi communication
Power supply
Lithium-ion rechargeable battery 3.6 V / 80 Wh
12 hours typical use*
AC adapter/charger: 12 V / 36 W; standard barrel connector
*(based upon an operating cycle of 25% measurement, 25% computation, 50% 'sleep' mode)
External
interface USB host for memory stick
USB slave for PC communication, charging (5 V DC / 1.5 A)
RS-232 (serial) for sensor, RS-485 (serial) for sensor, I-Data for sensor,
Bluetooth, WiFi, RFID integrated
Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps
Camera
5 MP
Environmental protection
IP 65 (dustproof and water jets resistant)
Shockproof
Relative humidity: 10% to 90%
Drop test
1 m (3 1/4 ft)
Temperature range
Operation / Charging: 0 °C to 40 °C (32 °F to 104 °F)
Storage: -10 °C to 50 °C (14 °F to 122 °F)
Dimensions
Approx. 273 x 181 x 56 mm (10 3/4" x 7 1/8" x 2 3/16")
Weight
Approx. 1.88 kg (4.1 lbs)
Also you can check product : NEW Pruftechnik ROTALIGN Touch Laser Shaft Alignment System
Optalign Touch delivers unrivaled precision and easy-of-use with cutting edge technology from the old pros in laser alignment, Prüftechnik.
OPTALIGN touch was designed by some of the world’s leading alignment experts to solve problems in the easiest way possible. Featuring the unique sensALIGN 5 laser and sensor heads, it enables powerful, fast, and efficient ways to align machine shafts.
NEW Pruftechnik Shaftalign Touch Laser Shaft Alignment System (Shaftalign Touch)
Pruftechnik Shaftalign Touch Laser Shaft Alignment System
A new standard for affordable laser alignment
The new ShaftAlign Touch is a rugged laser alignment system that provides digital, cloud, and other advancements over the decades-old but still widely used dial indicator and feeler gauge.
ShaftAlign Touch is a combination of software and hardware innovations enabling maintenance teams to address a wide variety of alignment challenges that basic laser alignment systems cannot handle.
It also delivers premium Adaptive Alignment capabilities that, until now, were not available in an entry-level system.
Two innovations – single-laser technology and Active Situational Intelligence – differentiate ShaftAlign Touch from the competition.
Together, they deliver the “magic” that enables Prüftechnik alignment products to automatically adapt – in real time, as alignment jobs are finished – to the asset, the situation, and the user's experience level.
Step up to the high precision and intelligence built into the ShaftAlign Touch: eliminate the time, rework, and guessing common to other approaches. Get more done while enabling your machines to operate at peak performance.
Fast, easy, and precise alignment that adapts to your needs
Single-laser technology
Active Situational Intelligence
Work faster without sacrificing precision
Freeze-Frame Measurement
Real-Time Measurement Quality Enhancement
Instant collaboration via the cloud
Rugged interface with the highest IP rating in its class
Up to 8 measurement points for more precise alignment of vertical machines
SHAFTALIGN touch by PRUFTECHNIK
Adaptive Alignment Advances
ShaftAlign Touch uses single-laser technology and Active Situational Intelligence to adapt to the asset, the situation, and the maintenance team, aligning standard rotating assets with new levels of precision and speed.
Key benefits at a glance
- High performance and precise results
The new ShaftAlign® Touch leverages single-laser technology to
provide high-precision, high-performance alignment measurements.
- Quick setup and intuitive user interface
Its quickly mounted setup and tablet-like, intuitive guided user
interface make the ShaftAlign® Touch more user-friendly than any of
the conventional measurement methods.
- Share data via the cloud
You can leverage its integrated WiFi cloud solution to easily transfer
measurement data from the ShaftAlign® Touch handheld device to the
ARC 4.0 software.
General specifications
CPU
Processor: Exynos 9810, 2.7GHz,1.7GHz Octa-Core
Memory: 4 GB RAM, 64 GB Flash memory
Display
Technology: TFT
Integrated light sensor for automated adjustment
of the brightness to the display according to the
lighting conditions hence extending battery life
Resolution: 1920 x 1200 Pixel
Size: 203.1 mm (8”)
Connectivity
Wi-Fi: 802.11 a/b/g/n/ac/ax 2.4G 5GHz, HE80, MIMO,
1024-QAM
Wireless: 5.0
RFID: NFC
Camera
Main Camera -
Resolution: 13.0 MP, Auto Focus
Front Camera -Resolution: 5.0 MP
Environmental protection
IP 68: dustproof, submersible 1.5 m
Temperature range
Operation: -20°C to 50°C (-4°F to 122°F)
Battery
Type: Li-Ion rechargeable battery 3.8 V / 5050 mAh /
19.2 Wh
Operating time: Up to 11 hours
Dimensions (without hand straps)
Approx. 256 x 149 x 35 mm
(10 5/64” x 5 55/64” x 1 3/8”)
Weight (without hand straps)
Approx. 710 g (1.6 lbs)
Reflector (prism)
General specifications
Type
90° roof prism
Accuracy
(avg) > 99%
Environmental protection
IP 67 (submersible, dustproof)
Temperature range
Operation: -20°C to 60°C (-4°F to 140°F)
Storage: -20°C to 80°C (-4°F to 176°F)
Dimensions
Approx. 100 x 41 x 35 mm (4” x 1 5/8”
x 1 3/8”)
Weight
Approx. 65 g (2.3 oz)
sensALIGN 3 sensor
General specifications
Measurement principle
Coaxial, reflected laser beam
LED indicators
1 LED for laser beam status and battery status
1 LED for Wireless communication
Power supply
Battery: Lithium-Ion rechargeable battery 3.7 V/ 5 Wh
Operating time: 10 hours (continuous use)
Charging time: Using charger – 2.5 h for up to 90%
3.5 h for up to 100%
Using USB port – 3 h for up to 90%
4 h for up to 100%
Environmental protection
IP 65: Dustproof and water jets resistant,
shockproof
Relative humidity: 10% to 90% (non-condensing)
Ambient light protection
Yes
Temperature range
Operation: -10°C to 50°C (14°F to 122°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Dimensions
Approx. 105 x 69 x 55 mm
(4 9/64” x 2 23/32” x 2 11/64”)
Weight
Approx. 210 g (7.4 oz) with dust cap
Detector
Measurement range: Unlimited, dynamically extendible
Resolution: 1 μm (0.04 mil) and angular 10 μRad
Error (avg): < 2%
Inclinometer
Measurement range: 0° to 360°
Resolution: 0.1°
Inclinometer error: 0.3% full scale
Laser
Type: Semiconductor laser diode
Wavelength: 630 - 680 nm (red, visible)
Safety class: Class 2 according to IEC 60825-1:2014
The laser complies with 21 CFR 1040.10
and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated
June 24, 2007.
Beam power: < 1 mW
Beam divergence: < 0.3 mrad
Safety precautions: Do not look into laser beam
External interface
Wireless communication
Transmission distance
Up to 30 m (98 ft) direct line of sight
Country radio certifications
Approvals granted for specific regions
(refer to the provided ‘Safety and general
information’ document)
Also you can check product : NEW Pruftechnik OPTALIGN Touch Laser Shaft Alignment SYstem
A new standard for affordable laser alignment
The new ShaftAlign Touch is a rugged laser alignment system that provides digital, cloud, and other advancements over the decades-old but still widely used dial indicator and feeler gauge.
ShaftAlign Touch is a combination of software and hardware innovations enabling maintenance teams to address a wide variety of alignment challenges that basic laser alignment systems cannot handle.
It also delivers premium Adaptive Alignment capabilities that, until now, were not available in an entry-level system.
Two innovations – single-laser technology and Active Situational Intelligence – differentiate ShaftAlign Touch from the competition.
Together, they deliver the “magic” that enables Prüftechnik alignment products to automatically adapt – in real time, as alignment jobs are finished – to the asset, the situation, and the user's experience level.
Step up to the high precision and intelligence built into the ShaftAlign Touch: eliminate the time, rework, and guessing common to other approaches. Get more done while enabling your machines to operate at peak performance.
Fast, easy, and precise alignment that adapts to your needs
Single-laser technology
Active Situational Intelligence
Work faster without sacrificing precision
Freeze-Frame Measurement
Real-Time Measurement Quality Enhancement
Instant collaboration via the cloud
Rugged interface with the highest IP rating in its class
Up to 8 measurement points for more precise alignment of vertical machines
SHAFTALIGN touch by PRUFTECHNIK
Adaptive Alignment Advances
ShaftAlign Touch uses single-laser technology and Active Situational Intelligence to adapt to the asset, the situation, and the maintenance team, aligning standard rotating assets with new levels of precision and speed.
Key benefits at a glance
- High performance and precise results
The new ShaftAlign® Touch leverages single-laser technology to
provide high-precision, high-performance alignment measurements.
- Quick setup and intuitive user interface
Its quickly mounted setup and tablet-like, intuitive guided user
interface make the ShaftAlign® Touch more user-friendly than any of
the conventional measurement methods.
- Share data via the cloud
You can leverage its integrated WiFi cloud solution to easily transfer
measurement data from the ShaftAlign® Touch handheld device to the
ARC 4.0 software.
General specifications
CPU
Processor: Exynos 9810, 2.7GHz,1.7GHz Octa-Core
Memory: 4 GB RAM, 64 GB Flash memory
Display
Technology: TFT
Integrated light sensor for automated adjustment
of the brightness to the display according to the
lighting conditions hence extending battery life
Resolution: 1920 x 1200 Pixel
Size: 203.1 mm (8”)
Connectivity
Wi-Fi: 802.11 a/b/g/n/ac/ax 2.4G 5GHz, HE80, MIMO,
1024-QAM
Wireless: 5.0
RFID: NFC
Camera
Main Camera -
Resolution: 13.0 MP, Auto Focus
Front Camera -Resolution: 5.0 MP
Environmental protection
IP 68: dustproof, submersible 1.5 m
Temperature range
Operation: -20°C to 50°C (-4°F to 122°F)
Battery
Type: Li-Ion rechargeable battery 3.8 V / 5050 mAh /
19.2 Wh
Operating time: Up to 11 hours
Dimensions (without hand straps)
Approx. 256 x 149 x 35 mm
(10 5/64” x 5 55/64” x 1 3/8”)
Weight (without hand straps)
Approx. 710 g (1.6 lbs)
Reflector (prism)
General specifications
Type
90° roof prism
Accuracy
(avg) > 99%
Environmental protection
IP 67 (submersible, dustproof)
Temperature range
Operation: -20°C to 60°C (-4°F to 140°F)
Storage: -20°C to 80°C (-4°F to 176°F)
Dimensions
Approx. 100 x 41 x 35 mm (4” x 1 5/8”
x 1 3/8”)
Weight
Approx. 65 g (2.3 oz)
sensALIGN 3 sensor
General specifications
Measurement principle
Coaxial, reflected laser beam
LED indicators
1 LED for laser beam status and battery status
1 LED for Wireless communication
Power supply
Battery: Lithium-Ion rechargeable battery 3.7 V/ 5 Wh
Operating time: 10 hours (continuous use)
Charging time: Using charger – 2.5 h for up to 90%
3.5 h for up to 100%
Using USB port – 3 h for up to 90%
4 h for up to 100%
Environmental protection
IP 65: Dustproof and water jets resistant,
shockproof
Relative humidity: 10% to 90% (non-condensing)
Ambient light protection
Yes
Temperature range
Operation: -10°C to 50°C (14°F to 122°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Dimensions
Approx. 105 x 69 x 55 mm
(4 9/64” x 2 23/32” x 2 11/64”)
Weight
Approx. 210 g (7.4 oz) with dust cap
Detector
Measurement range: Unlimited, dynamically extendible
Resolution: 1 μm (0.04 mil) and angular 10 μRad
Error (avg): < 2%
Inclinometer
Measurement range: 0° to 360°
Resolution: 0.1°
Inclinometer error: 0.3% full scale
Laser
Type: Semiconductor laser diode
Wavelength: 630 - 680 nm (red, visible)
Safety class: Class 2 according to IEC 60825-1:2014
The laser complies with 21 CFR 1040.10
and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated
June 24, 2007.
Beam power: < 1 mW
Beam divergence: < 0.3 mrad
Safety precautions: Do not look into laser beam
External interface
Wireless communication
Transmission distance
Up to 30 m (98 ft) direct line of sight
Country radio certifications
Approvals granted for specific regions
(refer to the provided ‘Safety and general
information’ document)
Also you can check product : NEW Pruftechnik OPTALIGN Touch Laser Shaft Alignment SYstem
The new ShaftAlign Touch is a rugged laser alignment system that provides digital, cloud, and other advancements over the decades-old but still widely used dial indicator and feeler gauge. ShaftAlign Touch is a combination of software and hardware innovations enabling maintenance teams to address a wide variety of alignment challenges that basic laser alignment systems cannot handle.
USED Pruftechnik Optalign Touch Laser Alignment System (Optalign Touch)
The OPTALIGN Touch by PRÜFTECHNIK is a touch screen device used to control and read data from the PRUFTECHNIK senseALIGN and infiniRange systems and it was designed by some of the world’s leading alignment experts to solve problems in the easiest way possible.
The sensALIGN® technology is based on the inherent PRÜFTECHNIK single laser technology, providing highly accurate measurement results, as well as the easiest mounting and measuring in the field. sensALIGN® sensors include two HD large position sensitive detectors (PSD) and MEMS inclinometers, whilst also connecting wirelessly to the device via Bluetooth®.
Combined with the detector extension capability InfiniRange®, there is no need for pre-alignment as it is always possible to measure the initial alignment condition, no matter how big the misalignment is. The live corrections of the machine can also be started at any sensor clock position after the measurement shaft rotation.
This touch screen device is made for maximum durability. Not only it is waterproof and dust-proof according to IP65, but it is also shock-proof, oil, dirt and scratch resistant.
FEATURES :
User-friendly interface that guides users on how to measure and align machinery
Single laser technology provides highly accurate measurements every time
Allows simultaneous real-time machine corrections in both horizontal and vertical directions
Automatic collection of alignment data during shaft rotation
WiFi and Bluetooth connectivity for easy measurement sharing and team collaboration
Covered by Fluke Reliability Extended Warranty Program
SPECS :
CPU
1.0 GHz quad core ARM Cortex-A9
Memory Memory
2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory
Display
Projective capacitive multi-touchscreen
Transmissive (sunlight-readable) backlit TFT color graphic display; optically bonded, protective
industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel
Dimensions: 178 mm (7”) diagonal
LED indicators
3 LEDs for battery status
1 LED for WiFi communication
Power supply
Lithium-ion rechargeable battery 3.6 V / 80 Wh
12 hours typical use*
AC adapter/charger: 12 V / 36 W; standard barrel connector
*(based upon an operating cycle of 25% measurement, 25% computation, 50% 'sleep' mode)
External
interface USB host for memory stick
USB slave for PC communication, charging (5 V DC / 1.5 A)
RS-232 (serial) for sensor, RS-485 (serial) for sensor, I-Data for sensor,
Bluetooth, WiFi, RFID integrated
Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps
Camera
5 MP
Environmental protection
IP 65 (dustproof and water jets resistant)
Shockproof
Relative humidity: 10% to 90%
Drop test
1 m (3 1/4 ft)
Temperature range
Operation / Charging: 0 °C to 40 °C (32 °F to 104 °F)
Storage: -10 °C to 50 °C (14 °F to 122 °F)
Dimensions
Approx. 273 x 181 x 56 mm (10 3/4" x 7 1/8" x 2 3/16")
Weight
Approx. 1.88 kg (4.1 lbs)
Also you can check product : NEW Pruftechnik Shaftalign Touch Laser Shaft Alignment System
The sensALIGN® technology is based on the inherent PRÜFTECHNIK single laser technology, providing highly accurate measurement results, as well as the easiest mounting and measuring in the field. sensALIGN® sensors include two HD large position sensitive detectors (PSD) and MEMS inclinometers, whilst also connecting wirelessly to the device via Bluetooth®.
Combined with the detector extension capability InfiniRange®, there is no need for pre-alignment as it is always possible to measure the initial alignment condition, no matter how big the misalignment is. The live corrections of the machine can also be started at any sensor clock position after the measurement shaft rotation.
This touch screen device is made for maximum durability. Not only it is waterproof and dust-proof according to IP65, but it is also shock-proof, oil, dirt and scratch resistant.
FEATURES :
User-friendly interface that guides users on how to measure and align machinery
Single laser technology provides highly accurate measurements every time
Allows simultaneous real-time machine corrections in both horizontal and vertical directions
Automatic collection of alignment data during shaft rotation
WiFi and Bluetooth connectivity for easy measurement sharing and team collaboration
Covered by Fluke Reliability Extended Warranty Program
SPECS :
CPU
1.0 GHz quad core ARM Cortex-A9
Memory Memory
2 GB RAM, 1 GB Internal Flash, 32 GB SD-Card Memory
Display
Projective capacitive multi-touchscreen
Transmissive (sunlight-readable) backlit TFT color graphic display; optically bonded, protective
industrial display, integrated light sensor for automated adjustment of the brightness to the display
Resolution: 800 x 480 Pixel
Dimensions: 178 mm (7”) diagonal
LED indicators
3 LEDs for battery status
1 LED for WiFi communication
Power supply
Lithium-ion rechargeable battery 3.6 V / 80 Wh
12 hours typical use*
AC adapter/charger: 12 V / 36 W; standard barrel connector
*(based upon an operating cycle of 25% measurement, 25% computation, 50% 'sleep' mode)
External
interface USB host for memory stick
USB slave for PC communication, charging (5 V DC / 1.5 A)
RS-232 (serial) for sensor, RS-485 (serial) for sensor, I-Data for sensor,
Bluetooth, WiFi, RFID integrated
Integrated Wireless LAN IEEE 802.11 b/g/n up to 72.2 Mbps
Camera
5 MP
Environmental protection
IP 65 (dustproof and water jets resistant)
Shockproof
Relative humidity: 10% to 90%
Drop test
1 m (3 1/4 ft)
Temperature range
Operation / Charging: 0 °C to 40 °C (32 °F to 104 °F)
Storage: -10 °C to 50 °C (14 °F to 122 °F)
Dimensions
Approx. 273 x 181 x 56 mm (10 3/4" x 7 1/8" x 2 3/16")
Weight
Approx. 1.88 kg (4.1 lbs)
Also you can check product : NEW Pruftechnik Shaftalign Touch Laser Shaft Alignment System
User-friendly interface that guides users on how to measure and align machinery
Single laser technology provides highly accurate measurements every time
Allows simultaneous real-time machine corrections in both horizontal and vertical directions
Automatic collection of alignment data during shaft rotation
WiFi and Bluetooth connectivity for easy measurement sharing and team collaboration
Covered by Fluke Reliability Extended Warranty Program
NEW Pruftechnik Rotalign Touch EX Laser Shaft Alignment System (Rotalign Touch EX)
The only adaptive laser shaft alignment system for EX areas
Intrinsically safe
ATEX/IECEx Zone 1 certified. Avoid 'hot work permits' and save time.
Adaptability saves time and effort
Rugged tablet with touch screen, Active Situational Intelligence, integrated Wi-Fi, Bluetooth, RFID and camera
Best measurement accuracy and repeatability
Unique sensALIGN 5 single-laser technology offers repeatable high precision and adapts to any situation
Fluke Reliability Extended Warranty Program
NEW: The Fluke Reliability Extended Warranty Program now covers the ROTALIGN Touch EX and offers you peace of mind, convenience, device accuracy, and savings on service costs via:
Extending the manufacturer’s warranty from 2 to 5 years
Three free calibrations:
Calibrations for extended warranty customers are prioritized!
No risk of calibration price increase (the price of your 3 calibrations are locked in with purchase of the extended warranty)
A 15% discount on equipment repairs (not covered by the manufacturer’s warranty)
Adaptive alignment features when working in dangerous areas
ATEX/IECEx Zone 1 certified including ruggedized IP68 tablet device
Single-laser technology sensALIGN 5 featuring SWEEP and PASS Mode for uncoupled shafts
Active Situational Intellgence
Simultaneous Horizontal and Vertical Live Move Move Simulator
Thermal growth and targets
Spacer coupling and in-situ Cardan shaft alignment with rotating arm bracket
Soft Foot Wizard to diagnose soft foot problems
6-machine train alignment
Advanced vertical machine alignment with vertiSWEEP continuous measurement mode
ALIGNMENT RELIABILITY CENTER 4.0 PC software including auto-activation and PDF reporting
Mobile connectivity with integrated Wi-Fi, Bluetooth, RFID and camera
Advanced laser shaft alignment in EX/ATEX areas
ROTALIGN touch EX is Zone 1 ATEX/IECEX certified. Packed with user-friendly alignment features unique to PRUFTECHNIK, the ROTALIGN touch EX shortens the measurement time with:
Continuous SWEEP Mode for high-quality measurement in only one shaft rotation
Live Move function for simultaneous real-time machine corrections in both horizontal and vertical directions
vertiSWEEP to measure vertical machines in one rotation of the shaft
Cardan shaft rotating-arm bracket allows measurements to be performed without removing the shaft
Soft Foot Wizard to diagnose soft foot problems
Move Simulator lets the operator simulate shim values and horizontal corrections before moving the machine
Have instant access to the critical data you need with full mobile connectivity. The ROTALIGN touch EX tablet is Wi-Fi enabled and equipped with a Bluetooth module, an integrated camera, and an RFID reader for automatic machine identification and error-free two-way transfer of asset data.
Direct communication between the tablet and the ALIGNMENT RELIABILITY CENTER 4.0 PC software allows specialists to archive, analyze, and process alignment data to improve asset performance improvement and reliability.
Technology
sensALIGN 5
sensALIGN Series technology is based on PRUFTECHNIK single-laser technology and provides highly precise measurement results with the easiest mounting and measuring in the field.
sensALIGN 5 sensors include two HD large position-sensitive detectors (PSD) and MEMS inclinometers. Combined with detector extension capability (InfiniRange), it is always possible to measure and document the initial alignment condition, no matter how big the misalignment.
The technology also allows the simultaneous monitoring of machine corrections in vertical and horizontal directions, starting from any angular position where the sensor comes to stop.
General specifications
CPU
Exynos 7 Octa, 1.6GHz Octa-Core (Cortex-A53)
Memory
3 GB RAM, 16 GB Flash memory
Display
8“ TFT, 1280 x 800 pixels
Connectivity
Wi-Fi 802.11 a/b/g/n/ac (2.4GHz 5GHz)
Bluetooth 4.2
RFID
Cameras
8 MP AF 5 MP
IP
Rating IP 68
Operating temperature
-20 ... 50 °C
Battery
Li-Ion rechargeable battery 3.8 V / 4450 mAh / 16.91 Wh
up to 11 hours battery life
Dimensions,Weight
162 x 256 x 33 mm, ca. 1250 g
ATEX (Europe)
II 2G Ex db ia op is IIC T5 Gb
II 2D Ex tb ia op is IIIC T100°C Db
IECEx (International)
- Ex db ia op is IIC T5 Gb
- Ex tb ia op is IIIC T100°C Db
Wireless EX module
General specifications
Type
2.4 GHz, Class 1 connectivity, transmitting
power 100 mW Contains FCCID
POOWML-C40
Transmission distance
Up to 10 m [33 ft.] direct line of sight
Transmission distance
Up to 10 m [33 ft.] direct line of sight
Power supply
Batteries: 2 x 1.5 V IEC LR6 (“AA”) batteries
Only use Duracell Industrial ID 1500 or
Energizer E91
Operating time: 14 hours typical use (based upon an
operating cycle of 50% measurement, 50% standby)
Temperature range
Operating time: -10°C to 40°C (14°F to 104°F)
Environmental protection
IP 65: Dustproof and water spray resistant, shockproof
Dimensions
Approx. 81 x 41 x 34 mm (3 1/8” x 1 11/16” x 1 5/16”)
Weight
Approx. 133 g (4.7 oz.) including batteries and cable
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: ZELM 11 ATEX 0474
IECEx ZLM 11.0009
sensALIGN 5 EX sensor
General specifications
Type
5-axis sensor: 2 planes (4 displacement axes and angle)
Measurement range: Unlimited, dynamically extendible
Resolution: 1 μm (0.04 mil) and angular 10 μRad
Accuracy (avg): > 98%
Measurement rate: approx. 20 Hz
Inclinometer
Resolution: 0.1°
Error: 0.3% full scale
LED indicators
2 LEDs
Environmental protection
IP 65: dustproof and water jets resistant, shockproof
Relative humidity:10% to 90%
Ambient light protection
Yes
Temperature range
Operation: -10°C to 50°C (14°F to 122°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Dimensions
Approx. 105 x 74 x 53 mm
(4 9/64” x 2 29/32” x 2 3/32”)
Weight
Approx. 220 g (7.7 oz)
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1074X
IECEx EPS 15.0067X
sensALIGN 5 EX laser
General specifications
Type
Semiconductor laser diode
Beam power
< 1mW
Inclinometer
Resolution: 0.1°
Error: 0.3% full scale
Beam divergence
0.3 mrad
Wavelength
630 – 680 nm (red, visible)
Laser class
Class 2 according to IEC 60825-1:2014
The laser complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Safety precaution
Do not look into laser beam
Power supply
Batteries: 2 x 1.5 V IEC LR6 (“AA“)
Only use Duracell Industrial ID 1500 or Energizer
E91
Operating time: 120 hours
Protection
IP 65: dustproof and water jets resistant, shockproof
Relative humidity: 10% to 90%
Temperature range
Operation: -10 °C to 50 °C (14 °F to 122 °F)
Storage: -20 °C to 60 °C (-4 °F to 140 °F)
Dimensions
Approx. 105 x 74 x 47 mm
(4 9/64” x 2 29/32” x 1 27/32”)
Weight
Approx. 225 g (7 15/16 oz.)
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1 075
IECEx EPS 15.0068
Optical output power laser (failure) < 35 mW
Also you can check product : USED Pruftechnik Optalign Touch Laser Alignment System
Intrinsically safe
ATEX/IECEx Zone 1 certified. Avoid 'hot work permits' and save time.
Adaptability saves time and effort
Rugged tablet with touch screen, Active Situational Intelligence, integrated Wi-Fi, Bluetooth, RFID and camera
Best measurement accuracy and repeatability
Unique sensALIGN 5 single-laser technology offers repeatable high precision and adapts to any situation
Fluke Reliability Extended Warranty Program
NEW: The Fluke Reliability Extended Warranty Program now covers the ROTALIGN Touch EX and offers you peace of mind, convenience, device accuracy, and savings on service costs via:
Extending the manufacturer’s warranty from 2 to 5 years
Three free calibrations:
Calibrations for extended warranty customers are prioritized!
No risk of calibration price increase (the price of your 3 calibrations are locked in with purchase of the extended warranty)
A 15% discount on equipment repairs (not covered by the manufacturer’s warranty)
Adaptive alignment features when working in dangerous areas
ATEX/IECEx Zone 1 certified including ruggedized IP68 tablet device
Single-laser technology sensALIGN 5 featuring SWEEP and PASS Mode for uncoupled shafts
Active Situational Intellgence
Simultaneous Horizontal and Vertical Live Move Move Simulator
Thermal growth and targets
Spacer coupling and in-situ Cardan shaft alignment with rotating arm bracket
Soft Foot Wizard to diagnose soft foot problems
6-machine train alignment
Advanced vertical machine alignment with vertiSWEEP continuous measurement mode
ALIGNMENT RELIABILITY CENTER 4.0 PC software including auto-activation and PDF reporting
Mobile connectivity with integrated Wi-Fi, Bluetooth, RFID and camera
Advanced laser shaft alignment in EX/ATEX areas
ROTALIGN touch EX is Zone 1 ATEX/IECEX certified. Packed with user-friendly alignment features unique to PRUFTECHNIK, the ROTALIGN touch EX shortens the measurement time with:
Continuous SWEEP Mode for high-quality measurement in only one shaft rotation
Live Move function for simultaneous real-time machine corrections in both horizontal and vertical directions
vertiSWEEP to measure vertical machines in one rotation of the shaft
Cardan shaft rotating-arm bracket allows measurements to be performed without removing the shaft
Soft Foot Wizard to diagnose soft foot problems
Move Simulator lets the operator simulate shim values and horizontal corrections before moving the machine
Have instant access to the critical data you need with full mobile connectivity. The ROTALIGN touch EX tablet is Wi-Fi enabled and equipped with a Bluetooth module, an integrated camera, and an RFID reader for automatic machine identification and error-free two-way transfer of asset data.
Direct communication between the tablet and the ALIGNMENT RELIABILITY CENTER 4.0 PC software allows specialists to archive, analyze, and process alignment data to improve asset performance improvement and reliability.
Technology
sensALIGN 5
sensALIGN Series technology is based on PRUFTECHNIK single-laser technology and provides highly precise measurement results with the easiest mounting and measuring in the field.
sensALIGN 5 sensors include two HD large position-sensitive detectors (PSD) and MEMS inclinometers. Combined with detector extension capability (InfiniRange), it is always possible to measure and document the initial alignment condition, no matter how big the misalignment.
The technology also allows the simultaneous monitoring of machine corrections in vertical and horizontal directions, starting from any angular position where the sensor comes to stop.
General specifications
CPU
Exynos 7 Octa, 1.6GHz Octa-Core (Cortex-A53)
Memory
3 GB RAM, 16 GB Flash memory
Display
8“ TFT, 1280 x 800 pixels
Connectivity
Wi-Fi 802.11 a/b/g/n/ac (2.4GHz 5GHz)
Bluetooth 4.2
RFID
Cameras
8 MP AF 5 MP
IP
Rating IP 68
Operating temperature
-20 ... 50 °C
Battery
Li-Ion rechargeable battery 3.8 V / 4450 mAh / 16.91 Wh
up to 11 hours battery life
Dimensions,Weight
162 x 256 x 33 mm, ca. 1250 g
ATEX (Europe)
II 2G Ex db ia op is IIC T5 Gb
II 2D Ex tb ia op is IIIC T100°C Db
IECEx (International)
- Ex db ia op is IIC T5 Gb
- Ex tb ia op is IIIC T100°C Db
Wireless EX module
General specifications
Type
2.4 GHz, Class 1 connectivity, transmitting
power 100 mW Contains FCCID
POOWML-C40
Transmission distance
Up to 10 m [33 ft.] direct line of sight
Transmission distance
Up to 10 m [33 ft.] direct line of sight
Power supply
Batteries: 2 x 1.5 V IEC LR6 (“AA”) batteries
Only use Duracell Industrial ID 1500 or
Energizer E91
Operating time: 14 hours typical use (based upon an
operating cycle of 50% measurement, 50% standby)
Temperature range
Operating time: -10°C to 40°C (14°F to 104°F)
Environmental protection
IP 65: Dustproof and water spray resistant, shockproof
Dimensions
Approx. 81 x 41 x 34 mm (3 1/8” x 1 11/16” x 1 5/16”)
Weight
Approx. 133 g (4.7 oz.) including batteries and cable
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: ZELM 11 ATEX 0474
IECEx ZLM 11.0009
sensALIGN 5 EX sensor
General specifications
Type
5-axis sensor: 2 planes (4 displacement axes and angle)
Measurement range: Unlimited, dynamically extendible
Resolution: 1 μm (0.04 mil) and angular 10 μRad
Accuracy (avg): > 98%
Measurement rate: approx. 20 Hz
Inclinometer
Resolution: 0.1°
Error: 0.3% full scale
LED indicators
2 LEDs
Environmental protection
IP 65: dustproof and water jets resistant, shockproof
Relative humidity:10% to 90%
Ambient light protection
Yes
Temperature range
Operation: -10°C to 50°C (14°F to 122°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Dimensions
Approx. 105 x 74 x 53 mm
(4 9/64” x 2 29/32” x 2 3/32”)
Weight
Approx. 220 g (7.7 oz)
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1074X
IECEx EPS 15.0067X
sensALIGN 5 EX laser
General specifications
Type
Semiconductor laser diode
Beam power
< 1mW
Inclinometer
Resolution: 0.1°
Error: 0.3% full scale
Beam divergence
0.3 mrad
Wavelength
630 – 680 nm (red, visible)
Laser class
Class 2 according to IEC 60825-1:2014
The laser complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Safety precaution
Do not look into laser beam
Power supply
Batteries: 2 x 1.5 V IEC LR6 (“AA“)
Only use Duracell Industrial ID 1500 or Energizer
E91
Operating time: 120 hours
Protection
IP 65: dustproof and water jets resistant, shockproof
Relative humidity: 10% to 90%
Temperature range
Operation: -10 °C to 50 °C (14 °F to 122 °F)
Storage: -20 °C to 60 °C (-4 °F to 140 °F)
Dimensions
Approx. 105 x 74 x 47 mm
(4 9/64” x 2 29/32” x 1 27/32”)
Weight
Approx. 225 g (7 15/16 oz.)
Intrinsic safety
II 2G Ex ib IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1 075
IECEx EPS 15.0068
Optical output power laser (failure) < 35 mW
Also you can check product : USED Pruftechnik Optalign Touch Laser Alignment System
The Only Adaptive Laser Shaft Alignment System for EX areas.Intrinsically safe , Adaptability saves time and effort, Best measurement accuracy and repeatability, Fluke Reliability Extended Warranty Program.
Advanced vertical machine alignment with vertiSWEEP continuous measurement mode, ALIGNMENT RELIABILITY CENTER 4.0 PC software including auto-activation and PDF reporting, Mobile connectivity with integrated Wi-Fi, Bluetooth, RFID and camera, ATEX/IECEx Zone 1 certified including ruggedized IP68 tablet device
NEW Pruftechnik VIBSCANNER 2 EX High-Speed Vibration Measurement Tool (VIBSCANNER 2 EX)
VIBSCANNER 2 EX
All-in-one vibration measurement tool featuring explosion protection standards
Safe, simple, precise
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues.
This is the ultimate tool for fast and accurate machine vibration measurements. The VibScanner 2 Ex heightens efficiency and data quality. In just a quarter of the time of a standard data-collector, it precisely measures available data in three axes. Equipped with a triaxial sensor, it requires only one measurement point and the click of a button to begin collecting machine data.
This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
FEATURES
Quick, accurate measurements
This system delivers measurements up to four times faster than the industry standard
Easy to use
Users get a highly intuitive user interface with a simple one-button-push to collect machine data.
Explosion protected
The VibScanner 2 Ex is certified for safe use in high-risk environments where a mixture with air or flammable substances – in the form of gas, dusts, fibers and flyings – is likely to occur during regular operation.
NEW: Remote Condition Monitoring Services
The VIBSCANNER 2EX remote condition monitoring service helps maximize the success of your condition monitoring program, giving direct access to our in-house experts with decades of experience
Get access to data analytics, insights on asset status, guided recommendations, detect faults early, improve your maintenance planning, reduce costs, increase the lifespan of your machinery, and avoid unplanned downtime.
Specifically designed for route-based maintenance jobs in hazardous areas
Fast and comprehensive data collection
No training is required, thanks to an intuitive graphical user interface
Minimal time spent at machine, due to parallel digital data processing
Real triaxial data acquisition
RPM Finder generates swift RPM determination based on signal
Touch display: shock-proof, high-contrast, glove-enabled
TECHNOLOGY
The "Triax-Effect"
The VibScanner 2 Ex will diminish worries about finding the right measurement points at the machine. Because it features a Prüftechnik triaxial sensor, just one measurement point is required instead of three separate ones. This saves considerable time without sacrificing data quality. The “Triax-Effect” enables users to obtain measurements up to four times faster than the industry standard while achieving new levels of data quality.
ones. VibScanner 2 Ex thus saves considerable time without sacrificing data quality. The “Triax-Effect” enables obtaining measurements up to four times faster than the industry standard while achieving new levels of data quality.
Specifications
Measurement Channels
Number
3 synchronous analog channels (X/Y/Z)
Z channel (0 ... 50 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE Current Linedrive
X/Y channel (0 ... 10 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE
Dynamic range
109.5 dB (total)
Sampling rate
up to 131 kHz per channel
Signal processing
3 x 24 bit ADCs
Measuring range / Accuracy
Vibration acceleration: dependent on used sensor
Shock pulse: -10 dBsv to 80 dBsv /- 2 dBsv
Fulfilled standard
DIN ISO 2954:2012 (2-1 kHz, 10 Hz -1 kHz, 10-10 KHz)
Display
Type
Capacitive touchscreen
Optically bonded for high contrast and increased shock resistance
Active area
95 x 54 mm (3 3/4” x 2 1/8”)
Size
10.9 cm (4 1/3“)
Color depth
16 million colors
Viewing angle
< 140°
Operation
Multi touch – gesture control Glove-compatible
Illumination
Background lighting, adjustable
Ambient light sensor
Yes
Supply
Type
Li ion rechargeable battery
Nominal voltage
7.3V
Energy density
50 Wh
Charge time,typical
3.5 h (0 ... 100 % @ 25 °C / 77 °F)
2.5 h (0 ... 80 % @ 25 °C / 77 °F)
Charging temperature
10 °C ... 40 °C
[ 50 °F ... 104 °F]
Operating time, typical
10 h (cont. operation, rech. battery 100 %)
5 h (cont. operation, rech. battery 50 %)
Power adapter
100-240 V~, 50-60 Hz (input) 12 V 3 A (output)
Energy saving mode
Yes
Computer
Processor
ARM A9 - Quadcore 1 GHz
Operating elements
Touchscreen, ON/OFF key, Enter key
Memory
microSD card, 32 GB for measurement data, permanently
installed 2 GB RAM
USB
1 x USB 2.0, device interface
RFID
RFID reader module for PRÜFTECHNIK transponder:
ALI 50.628 EX0-25
Complies with ISO 14443a and ISO 15693
Reading distance: 2...3 cm (13/16” ... 1 3/16”)
WiFi
IEEE 802.11a/b/g/n/ac
Throughput: < 200 Mbps
Security: WPA2
Stroboscope
Frequency range: 0.1 – 1000 Hz
Resolution: 0.06 1/min.
LEDs: Risk group 1 per IEC 62471
LED
1x RGB LED (display for battery status and charging
process)
Environment/ mechanical system
Connections
Socket for power adapter Micro USB for data cable
Plug-in connector (8-pole) for signal cable
Housing, EX device
Housing: PC
Sheath: TPE, black, antistatic, conductive
Dimensions
203 x 143 x 76mm (LxWxH) (8 x 5 5/8 x 3”)
Weight
approx. 1.0 kg (35.3 oz)
Degree of protection
IP55
Temperature range
Operation: 0°C ... 50°C [ 32 °F ...122 °F ]
Storage: -20 °C ... 60 °C [-4 °F ... 140 °F ]
Air humidity
0 ... 90 %, non-condensing
Certifications CE, RoHS, FCC, FCC/IC, ATEX, IECEx,
NEC 500/505, CEC Annex J18, CEC sect. 18
Operation in the Ex-zone
General specifications
Ex-Data CSA – only for U.S. and Canada
CSA certificate
number:
CSA20CA80035102X
Install per control drawing:
LIT 52.300.EN
Marking of the device:
Ex ec [ic] IIC T4 Gc
Ex tc [ic] IIIB T135°C Dc
Class I, Zone 2, AEx ec [ic] IIC T4 Gc
Zone 22, AEx tc [ic] IIIB T135°C Dc
Class I, Div. 2, Groups A, B, C, D T4
Class II, Div. 2, Groups F, G, T4, Class III, Div.2
Associated equipment for Class I, Division 2,
Groups A, B, C, D
Associated equipment for Class II, Division 2,
Groups F, G
Associated equipment for Class III, Division 2
Ex-Data ATEX, IECEx
ATEX certificate number:
EPS 19 ATEX 1 119 X
IECEx certificate number:
IECEx EPS 19.0057X
Marking of the device:
II 3G Ex ec [ic] IIC T4 Gc
II 3D Ex tc [ic] IIIB T135°C Dc
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - VIbration Analysis and Balancing
All-in-one vibration measurement tool featuring explosion protection standards
Safe, simple, precise
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues.
This is the ultimate tool for fast and accurate machine vibration measurements. The VibScanner 2 Ex heightens efficiency and data quality. In just a quarter of the time of a standard data-collector, it precisely measures available data in three axes. Equipped with a triaxial sensor, it requires only one measurement point and the click of a button to begin collecting machine data.
This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
FEATURES
Quick, accurate measurements
This system delivers measurements up to four times faster than the industry standard
Easy to use
Users get a highly intuitive user interface with a simple one-button-push to collect machine data.
Explosion protected
The VibScanner 2 Ex is certified for safe use in high-risk environments where a mixture with air or flammable substances – in the form of gas, dusts, fibers and flyings – is likely to occur during regular operation.
NEW: Remote Condition Monitoring Services
The VIBSCANNER 2EX remote condition monitoring service helps maximize the success of your condition monitoring program, giving direct access to our in-house experts with decades of experience
Get access to data analytics, insights on asset status, guided recommendations, detect faults early, improve your maintenance planning, reduce costs, increase the lifespan of your machinery, and avoid unplanned downtime.
Specifically designed for route-based maintenance jobs in hazardous areas
Fast and comprehensive data collection
No training is required, thanks to an intuitive graphical user interface
Minimal time spent at machine, due to parallel digital data processing
Real triaxial data acquisition
RPM Finder generates swift RPM determination based on signal
Touch display: shock-proof, high-contrast, glove-enabled
TECHNOLOGY
The "Triax-Effect"
The VibScanner 2 Ex will diminish worries about finding the right measurement points at the machine. Because it features a Prüftechnik triaxial sensor, just one measurement point is required instead of three separate ones. This saves considerable time without sacrificing data quality. The “Triax-Effect” enables users to obtain measurements up to four times faster than the industry standard while achieving new levels of data quality.
ones. VibScanner 2 Ex thus saves considerable time without sacrificing data quality. The “Triax-Effect” enables obtaining measurements up to four times faster than the industry standard while achieving new levels of data quality.
Specifications
Measurement Channels
Number
3 synchronous analog channels (X/Y/Z)
Z channel (0 ... 50 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE Current Linedrive
X/Y channel (0 ... 10 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE
Dynamic range
109.5 dB (total)
Sampling rate
up to 131 kHz per channel
Signal processing
3 x 24 bit ADCs
Measuring range / Accuracy
Vibration acceleration: dependent on used sensor
Shock pulse: -10 dBsv to 80 dBsv /- 2 dBsv
Fulfilled standard
DIN ISO 2954:2012 (2-1 kHz, 10 Hz -1 kHz, 10-10 KHz)
Display
Type
Capacitive touchscreen
Optically bonded for high contrast and increased shock resistance
Active area
95 x 54 mm (3 3/4” x 2 1/8”)
Size
10.9 cm (4 1/3“)
Color depth
16 million colors
Viewing angle
< 140°
Operation
Multi touch – gesture control Glove-compatible
Illumination
Background lighting, adjustable
Ambient light sensor
Yes
Supply
Type
Li ion rechargeable battery
Nominal voltage
7.3V
Energy density
50 Wh
Charge time,typical
3.5 h (0 ... 100 % @ 25 °C / 77 °F)
2.5 h (0 ... 80 % @ 25 °C / 77 °F)
Charging temperature
10 °C ... 40 °C
[ 50 °F ... 104 °F]
Operating time, typical
10 h (cont. operation, rech. battery 100 %)
5 h (cont. operation, rech. battery 50 %)
Power adapter
100-240 V~, 50-60 Hz (input) 12 V 3 A (output)
Energy saving mode
Yes
Computer
Processor
ARM A9 - Quadcore 1 GHz
Operating elements
Touchscreen, ON/OFF key, Enter key
Memory
microSD card, 32 GB for measurement data, permanently
installed 2 GB RAM
USB
1 x USB 2.0, device interface
RFID
RFID reader module for PRÜFTECHNIK transponder:
ALI 50.628 EX0-25
Complies with ISO 14443a and ISO 15693
Reading distance: 2...3 cm (13/16” ... 1 3/16”)
WiFi
IEEE 802.11a/b/g/n/ac
Throughput: < 200 Mbps
Security: WPA2
Stroboscope
Frequency range: 0.1 – 1000 Hz
Resolution: 0.06 1/min.
LEDs: Risk group 1 per IEC 62471
LED
1x RGB LED (display for battery status and charging
process)
Environment/ mechanical system
Connections
Socket for power adapter Micro USB for data cable
Plug-in connector (8-pole) for signal cable
Housing, EX device
Housing: PC
Sheath: TPE, black, antistatic, conductive
Dimensions
203 x 143 x 76mm (LxWxH) (8 x 5 5/8 x 3”)
Weight
approx. 1.0 kg (35.3 oz)
Degree of protection
IP55
Temperature range
Operation: 0°C ... 50°C [ 32 °F ...122 °F ]
Storage: -20 °C ... 60 °C [-4 °F ... 140 °F ]
Air humidity
0 ... 90 %, non-condensing
Certifications CE, RoHS, FCC, FCC/IC, ATEX, IECEx,
NEC 500/505, CEC Annex J18, CEC sect. 18
Operation in the Ex-zone
General specifications
Ex-Data CSA – only for U.S. and Canada
CSA certificate
number:
CSA20CA80035102X
Install per control drawing:
LIT 52.300.EN
Marking of the device:
Ex ec [ic] IIC T4 Gc
Ex tc [ic] IIIB T135°C Dc
Class I, Zone 2, AEx ec [ic] IIC T4 Gc
Zone 22, AEx tc [ic] IIIB T135°C Dc
Class I, Div. 2, Groups A, B, C, D T4
Class II, Div. 2, Groups F, G, T4, Class III, Div.2
Associated equipment for Class I, Division 2,
Groups A, B, C, D
Associated equipment for Class II, Division 2,
Groups F, G
Associated equipment for Class III, Division 2
Ex-Data ATEX, IECEx
ATEX certificate number:
EPS 19 ATEX 1 119 X
IECEx certificate number:
IECEx EPS 19.0057X
Marking of the device:
II 3G Ex ec [ic] IIC T4 Gc
II 3D Ex tc [ic] IIIB T135°C Dc
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - VIbration Analysis and Balancing
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues. This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
USED Pruftechnik Vibxpert EX Vibration Analyzer and Data Collector (Vibxpert EX)
VIBXPERT EX records all types of machine vibrations, bearing conditions as well as process and visual inspection data, and transfers this
information to the OMNITREND maintenance software for evaluation, archiving and documentation.
The combination of its extensive range of features and easy operation
makes VIBXPERT EX the effective choice for a wide range of applications:
-High measurement accuracy and high-speed data collection
-Operating modes:
'Route' for routine data collection for condition-based maintenance,
'Multimode' for individual measurements for machine diagnosis
'Balancing' in one or two planes (optional).
'Machine templates' for recurrent measurement tasks within the
scope of acceptance or service measurements
-Almost every type of sensor can be connected
-One or two measurement channels (analog);
Upgrade to 2-channel device at any time via password.
-Intrinsic safety approved for zone 1
Hardware
-Two synchronous measurement channels for diagnosis of complex
measurements (e.g. shaft vibration).
-Unlimited storage capacity (Standard: 2 GB CompactFlash).
-Three alarm LEDs (red-yellow-green) indicate if thresholds have
been exceeded (based on ISO standards). A blue LED lights up if
everything is OK.
-Daylight sensor controls keyboard illumination
-Dustproof and splashproof (IP65) - ideal for use in demanding industrial environments
-Connector technology compatible to VIBSCANNER (same cable)
-Connector for NiCrNi thermocouples
-Connector for headphones
Data collection and data analysis
- Overall values
- Vibration acceleration, velocity, displacement
- Current & voltage (process parameters)
- Shock pulse (bearing condition)
- Temperature
- RPM
- Signals
- Frequency-based and order-based data collection
- Amplitude, envelope, order spectra
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range 96 dB (measurement) / 136 dB (total)
Sampling frequency up to 131 kHz per channel
Analog, Temperature, 1x Thermocouple (type K)
Digital, Pulse/ Tacho, 1x RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage ± 26 V
Switching threshold for 0 V ... 26 V signal max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal min. -8 V rising, max. -10 V falling
Pulse width < 0.1 ms
Output
Stroboscope control TTL output level
Frequency range 0 - 500 Hz
Resolution 0.05 Hz
Signal-Out Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range 0.5 Hz - 40 kHz
Output impedance 100 Ohm
Measurement range / Accuracy
Vibration acceleration depends on the sensor connected
Shock pulse -10 ...80 dBsv / ± 3dBsv
RPM 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled Frequency response acc to ISO 2954
Display
Type LCD, backlit
Pixel area 115 x 78 mm [ 4 1/2" x 3 1/16"]
Resolution 1/2 VGA (480 x 320 pixel)
Color depth 16 grey scales
Power supply
Battery type Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time < 5 hours in the instrument
Charger, input 110-240 V / 50-60 Hz
Charging temperature 0°C ... 50°C [ 32 °F ... 122 °F]
Computer
Processor Intel Strong ARM 206 MHz
Keyboard 2 joysticks and 12 keys for right-hand or left-hand operation. Keyboard illumination controlled by
ambient light.
Memory Internal: 64 MB RAM; Compact Flash: 1 GB or 4 GB
Serial interface RS 232, <115 kBaud
USB interface USB host for printing; USB slave for data exchange with OMNITREND
Ethernet interface 10 Mbit (10Base T), 10 Mbit (10Base T)
Environment / General
Connectors Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing Aluminium
Dimensions 250 x 220 x 37 mm [ 9 13/16" x 8 11/16" x 1 7/16" ] (LxWxH)
Weight approx. 2.3 kg [81 oz]
Environmental protection IP65, dust and splash-proofed
Temperature range -10°C ... 60°C (Operation), [ 14 °F ... 140°F]
-20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Intrinsic safety details
Marking
II 2G Ex ib IIC T4
Temperature range -10 °C ... 60 °C
Also you can check product : USED Pruftechnik Vibxpert II Vibration Analyzer and Dynamic Balancer
information to the OMNITREND maintenance software for evaluation, archiving and documentation.
The combination of its extensive range of features and easy operation
makes VIBXPERT EX the effective choice for a wide range of applications:
-High measurement accuracy and high-speed data collection
-Operating modes:
'Route' for routine data collection for condition-based maintenance,
'Multimode' for individual measurements for machine diagnosis
'Balancing' in one or two planes (optional).
'Machine templates' for recurrent measurement tasks within the
scope of acceptance or service measurements
-Almost every type of sensor can be connected
-One or two measurement channels (analog);
Upgrade to 2-channel device at any time via password.
-Intrinsic safety approved for zone 1
Hardware
-Two synchronous measurement channels for diagnosis of complex
measurements (e.g. shaft vibration).
-Unlimited storage capacity (Standard: 2 GB CompactFlash).
-Three alarm LEDs (red-yellow-green) indicate if thresholds have
been exceeded (based on ISO standards). A blue LED lights up if
everything is OK.
-Daylight sensor controls keyboard illumination
-Dustproof and splashproof (IP65) - ideal for use in demanding industrial environments
-Connector technology compatible to VIBSCANNER (same cable)
-Connector for NiCrNi thermocouples
-Connector for headphones
Data collection and data analysis
- Overall values
- Vibration acceleration, velocity, displacement
- Current & voltage (process parameters)
- Shock pulse (bearing condition)
- Temperature
- RPM
- Signals
- Frequency-based and order-based data collection
- Amplitude, envelope, order spectra
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range 96 dB (measurement) / 136 dB (total)
Sampling frequency up to 131 kHz per channel
Analog, Temperature, 1x Thermocouple (type K)
Digital, Pulse/ Tacho, 1x RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage ± 26 V
Switching threshold for 0 V ... 26 V signal max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal min. -8 V rising, max. -10 V falling
Pulse width < 0.1 ms
Output
Stroboscope control TTL output level
Frequency range 0 - 500 Hz
Resolution 0.05 Hz
Signal-Out Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range 0.5 Hz - 40 kHz
Output impedance 100 Ohm
Measurement range / Accuracy
Vibration acceleration depends on the sensor connected
Shock pulse -10 ...80 dBsv / ± 3dBsv
RPM 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled Frequency response acc to ISO 2954
Display
Type LCD, backlit
Pixel area 115 x 78 mm [ 4 1/2" x 3 1/16"]
Resolution 1/2 VGA (480 x 320 pixel)
Color depth 16 grey scales
Power supply
Battery type Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time < 5 hours in the instrument
Charger, input 110-240 V / 50-60 Hz
Charging temperature 0°C ... 50°C [ 32 °F ... 122 °F]
Computer
Processor Intel Strong ARM 206 MHz
Keyboard 2 joysticks and 12 keys for right-hand or left-hand operation. Keyboard illumination controlled by
ambient light.
Memory Internal: 64 MB RAM; Compact Flash: 1 GB or 4 GB
Serial interface RS 232, <115 kBaud
USB interface USB host for printing; USB slave for data exchange with OMNITREND
Ethernet interface 10 Mbit (10Base T), 10 Mbit (10Base T)
Environment / General
Connectors Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing Aluminium
Dimensions 250 x 220 x 37 mm [ 9 13/16" x 8 11/16" x 1 7/16" ] (LxWxH)
Weight approx. 2.3 kg [81 oz]
Environmental protection IP65, dust and splash-proofed
Temperature range -10°C ... 60°C (Operation), [ 14 °F ... 140°F]
-20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Intrinsic safety details
Marking
II 2G Ex ib IIC T4
Temperature range -10 °C ... 60 °C
Also you can check product : USED Pruftechnik Vibxpert II Vibration Analyzer and Dynamic Balancer
VIBXPERT EX records all types of machine vibrations, bearing conditions as well as process and visual inspection data, and transfers this information to the OMNITREND maintenance software for evaluation, archiving and documentation.
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.
NEW Pruftechnik VIBXPERT II Vibration Analysis System and Balancing Tool (VIBXPERT II)
The mobile solution for machinery health monitoring
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine. The robust design enables both fast and complex interventions. Whether in clinically clean systems, or harsh industrial environments. VIBXPERT II sets the standard in mobile machine and plant condition monitoring.
In addition to reliable, fast, and highly effective data analysis, the VIBXPERT II can also be used for operational balancing. This makes the VIBXPERT II the most powerful and effective device in mobile condition monitoring. VIBXPERT II is compatible with PRUFTECHNIK's own OMNITREND Center analysis software, enabling highly efficient and precise analysis results. Center analysis software, enabling highly efficient and precise analysis results.
Portable all-in-one system for effective vibration monitoring
Route-based data collection
Vibration analysis
One and two plane field balancing
Acceptance measurements with machine templates
Troubleshooting
Multimeter
Data logging
Visual inspection
Automatic Switchbox
The high-reliability solution for routes
High-quality data is critical to the success of your reliability-based maintenance program (RbM). However, many factors can significantly impact data quality.
Vibration readings of route-based data collection must be measured at exactly the same location every time. Measurements have to be performed quickly in order to save time and even untrained staff may have to collect data.
Last but not least, how can you make hard-to-reach measurement locations part of your reliability program without exposing employees to safety hazards during data collection?
PRUFTECHNIK’s Automatic Switchbox for VIBXPERT II is exactly the right solution. Compared to a standard switchbox whereby operators still may mix up measurement channels as they have to manually “turn the knob”, the proven Automatic Switchbox solution rules out human errors.
PRUFTECHNIK’s unique concept guarantees:
Maximum reliability of vibration data
Maximum efficiency – never has routine data collection been this short
Maximum security for operators
Maximum coverage - unlimited cable length with PRUFTECHNIK’s unique sensor concept.
General specifications
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range
DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range
96 dB (measurement) / 136 dB (total)
Sampling frequency
up to 131 kHz per channel
Impedance
90 kOhm, with cable VIB 5.433
Analog, Temperature,1x
Thermocouple (type K)
Digital, Pulse/ Tacho,1x
RPM, Trigger, Keyphaser with pulse and AC signals: 0 V . 26 V or -26 V ... 0 V
Max. input voltage
± 26 V
Switching threshold for 0 V ... 26 V signal
max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal
min. -8 V rising, max. -10 V falling
Pulse width
< 0.1 ms
Output
Stroboscope control
TTL
Frequency range
0 - 500 Hz
Resolution
0.05 Hz
Signal-Out
Connection for headphones to listen to the analog input
signal; signal processing (oscilloscope)
Frequency range
0.5 Hz - 40 kHz
Output impedance
100 Ohm
Measurement range / Accuracy
Vibration acceleration
depends on the sensor connected
Shock pulse
-10 ...80 dBsv / ± 3dBsv
RPM
10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower
accuracy is applicable)
Temperature, type K
-50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled
Frequency response acc to ISO 2954
Display
Type
TFT-LCD, backlit
Pixel area
116 x 87 mm
Resolution
VGA (640 x 480 pixel) with 140 ppi
Color depth
18 bit (262144 colors)
Power supply
Battery type
Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time
< 5 hours in the instrument
Charger, input
110-240 V / 50-60 Hz
Charging temperature
0°C ... 50°C [ 32 °F ... 122°F]
Computer
Processor
ARM CPU 800 MHz
Keyboard
1 navigation pad and 7 keys (Zoom, Escape, Function,
Help, Menu, On/Off); Keyboard illumination controlled by ambient light.
Memory
Internal: 128 MB DDR RAM; built-in CF card, has a capacity of 4GB, of which 2.7 GB is available for user data (non-removable)
Serial interface
RS 232, <115 kBaud
USB interface
USB 2.0
Ethernet interface
100 Mbit (100Base T), 10 Mbit (10Base T)
Environment /General
Connectors
Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing
ABS plastics
Dimensions
186 x 162 x 52 mm (LxWxH), [ 7 5/16” x 6 3/8” x 2
1/16” ]
Weight
approx. 1.1 kg [39 oz]
Temperature range
-10°C ... 60°C (Operation), [ 14 °F ... 140°F] -20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - Vibration Analysis and Balancing
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine. The robust design enables both fast and complex interventions. Whether in clinically clean systems, or harsh industrial environments. VIBXPERT II sets the standard in mobile machine and plant condition monitoring.
In addition to reliable, fast, and highly effective data analysis, the VIBXPERT II can also be used for operational balancing. This makes the VIBXPERT II the most powerful and effective device in mobile condition monitoring. VIBXPERT II is compatible with PRUFTECHNIK's own OMNITREND Center analysis software, enabling highly efficient and precise analysis results. Center analysis software, enabling highly efficient and precise analysis results.
Portable all-in-one system for effective vibration monitoring
Route-based data collection
Vibration analysis
One and two plane field balancing
Acceptance measurements with machine templates
Troubleshooting
Multimeter
Data logging
Visual inspection
Automatic Switchbox
The high-reliability solution for routes
High-quality data is critical to the success of your reliability-based maintenance program (RbM). However, many factors can significantly impact data quality.
Vibration readings of route-based data collection must be measured at exactly the same location every time. Measurements have to be performed quickly in order to save time and even untrained staff may have to collect data.
Last but not least, how can you make hard-to-reach measurement locations part of your reliability program without exposing employees to safety hazards during data collection?
PRUFTECHNIK’s Automatic Switchbox for VIBXPERT II is exactly the right solution. Compared to a standard switchbox whereby operators still may mix up measurement channels as they have to manually “turn the knob”, the proven Automatic Switchbox solution rules out human errors.
PRUFTECHNIK’s unique concept guarantees:
Maximum reliability of vibration data
Maximum efficiency – never has routine data collection been this short
Maximum security for operators
Maximum coverage - unlimited cable length with PRUFTECHNIK’s unique sensor concept.
General specifications
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range
DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range
96 dB (measurement) / 136 dB (total)
Sampling frequency
up to 131 kHz per channel
Impedance
90 kOhm, with cable VIB 5.433
Analog, Temperature,1x
Thermocouple (type K)
Digital, Pulse/ Tacho,1x
RPM, Trigger, Keyphaser with pulse and AC signals: 0 V . 26 V or -26 V ... 0 V
Max. input voltage
± 26 V
Switching threshold for 0 V ... 26 V signal
max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal
min. -8 V rising, max. -10 V falling
Pulse width
< 0.1 ms
Output
Stroboscope control
TTL
Frequency range
0 - 500 Hz
Resolution
0.05 Hz
Signal-Out
Connection for headphones to listen to the analog input
signal; signal processing (oscilloscope)
Frequency range
0.5 Hz - 40 kHz
Output impedance
100 Ohm
Measurement range / Accuracy
Vibration acceleration
depends on the sensor connected
Shock pulse
-10 ...80 dBsv / ± 3dBsv
RPM
10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower
accuracy is applicable)
Temperature, type K
-50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled
Frequency response acc to ISO 2954
Display
Type
TFT-LCD, backlit
Pixel area
116 x 87 mm
Resolution
VGA (640 x 480 pixel) with 140 ppi
Color depth
18 bit (262144 colors)
Power supply
Battery type
Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time
< 5 hours in the instrument
Charger, input
110-240 V / 50-60 Hz
Charging temperature
0°C ... 50°C [ 32 °F ... 122°F]
Computer
Processor
ARM CPU 800 MHz
Keyboard
1 navigation pad and 7 keys (Zoom, Escape, Function,
Help, Menu, On/Off); Keyboard illumination controlled by ambient light.
Memory
Internal: 128 MB DDR RAM; built-in CF card, has a capacity of 4GB, of which 2.7 GB is available for user data (non-removable)
Serial interface
RS 232, <115 kBaud
USB interface
USB 2.0
Ethernet interface
100 Mbit (100Base T), 10 Mbit (10Base T)
Environment /General
Connectors
Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing
ABS plastics
Dimensions
186 x 162 x 52 mm (LxWxH), [ 7 5/16” x 6 3/8” x 2
1/16” ]
Weight
approx. 1.1 kg [39 oz]
Temperature range
-10°C ... 60°C (Operation), [ 14 °F ... 140°F] -20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - Vibration Analysis and Balancing
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis. The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine.
NEW Pruftechnik VIBXPERT EX Vibration Analyzer and Balancing Tool (VIBXPERT EX)
Vibration analysis in explosive environments
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.
VIBXPERT EX collects field data including vibration information, bearing condition, inspection and process data and seamlessly integrates with the OMNITREND Center software platform for in-depth analysis.
The modular firmware structure allows you to upgrade the VIBXPERT EX from a route data collector to a full-blown troubleshooting device with advanced features such as coast down/run-up measurements, event recording, ODS & modal analysis and cross-channel phase measurement.
It is also possible to connect the VIBXPERT EX to protection systems via the buffered outputs. This enables you to perform additional analysis such as shaft vibration, shaft centerline plots or orbits e.g. on turbines, compressors and other turbomachinery.
As with all our data collectors and vibration analyzers, you will benefit from free software and firmware updates, and low ownership cost.
Intrinsically safe vibration analysis instrument and field balancer
Approved for ATEX Zone 1
Intuitive joystick operation (left- or right-handed)
Fast data acquisition with "trending spectra"
Robust aluminum housing
Compatible with VIBCODE transducer
Highest resolution for detailed frequency analysis
Interface to machine protection systems for further analysis
Technical Data
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range
DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range
96 dB (measurement) / 136 dB (total)
Sampling frequency
up to 131 kHz per channel
Analog, Temperature, 1x
Thermocouple (type K)
Digital, Pulse/ Tacho, 1x
RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage
± 26 V
Switching threshold for 0 V ... 26 V signal
max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal
min. -8 V rising, max. -10 V falling
Pulse width
< 0.1 ms
Output
Stroboscope control
TTL output level
Frequency range
0 - 500 Hz
Resolution
0.05 Hz
Signal-Out
Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range
0.5 Hz - 40 kHz
Output impedance
100 Ohm
Measurement range / Accuracy
Vibration acceleration
depends on the sensor connected
Shock pulse
-10 ...80 dBsv / ± 3dBsv
RPM
10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K
-50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled
Frequency response acc to ISO 2954
Display
Type
LCD, backlit
Pixel area
115 x 78 mm [ 4 1/2" x 3 1/16"]
Resolution
1/2 VGA (480 x 320 pixel)
Color depth
16 grey scales
Power supply
Battery type
Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time
< 5 hours in the instrument
Charger, input
110-240 V / 50-60 Hz
Charging temperature
0°C ... 50°C [ 32 °F ... 122 °F]
Computer
Processor
Intel Strong ARM 206 MHz
Keyboard
2 joysticks and 12 keys for right-hand or left-hand operation. Keyboard illumination controlled by ambient light.
Memory
Internal: 64 MB RAM; Compact Flash: 1 GB or 4 GB
Serial interface
RS 232, <115 kBaud
USB interface
USB host for printing; USB slave for data exchange with OMNITREND
Ethernet interface
10 Mbit (10Base T), 10 Mbit (10Base T)
Environment / General
Connectors
Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to
VIBSCANNER
Housing
Aluminium
Dimensions
250 x 220 x 37 mm [ 9 13/16" x 8 11/16" x 1 7/16" ] (LxWxH)
Weight
approx. 2.3 kg [81 oz]
Environmental protection
IP65, dust and splash-proofed
Temperature range
-10°C ... 60°C (Operation), [ 14 °F ... 140°F]
-20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Intrinsic safety details
Marking
II 2G Ex ib IIC T4
Temperature range
-10 °C ... 60 °C
Also you can check product : NEW Pruftechnik VIBXPERT II Vibration Analysis System and Balancing Tool
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.
VIBXPERT EX collects field data including vibration information, bearing condition, inspection and process data and seamlessly integrates with the OMNITREND Center software platform for in-depth analysis.
The modular firmware structure allows you to upgrade the VIBXPERT EX from a route data collector to a full-blown troubleshooting device with advanced features such as coast down/run-up measurements, event recording, ODS & modal analysis and cross-channel phase measurement.
It is also possible to connect the VIBXPERT EX to protection systems via the buffered outputs. This enables you to perform additional analysis such as shaft vibration, shaft centerline plots or orbits e.g. on turbines, compressors and other turbomachinery.
As with all our data collectors and vibration analyzers, you will benefit from free software and firmware updates, and low ownership cost.
Intrinsically safe vibration analysis instrument and field balancer
Approved for ATEX Zone 1
Intuitive joystick operation (left- or right-handed)
Fast data acquisition with "trending spectra"
Robust aluminum housing
Compatible with VIBCODE transducer
Highest resolution for detailed frequency analysis
Interface to machine protection systems for further analysis
Technical Data
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range
DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range
96 dB (measurement) / 136 dB (total)
Sampling frequency
up to 131 kHz per channel
Analog, Temperature, 1x
Thermocouple (type K)
Digital, Pulse/ Tacho, 1x
RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage
± 26 V
Switching threshold for 0 V ... 26 V signal
max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal
min. -8 V rising, max. -10 V falling
Pulse width
< 0.1 ms
Output
Stroboscope control
TTL output level
Frequency range
0 - 500 Hz
Resolution
0.05 Hz
Signal-Out
Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range
0.5 Hz - 40 kHz
Output impedance
100 Ohm
Measurement range / Accuracy
Vibration acceleration
depends on the sensor connected
Shock pulse
-10 ...80 dBsv / ± 3dBsv
RPM
10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K
-50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled
Frequency response acc to ISO 2954
Display
Type
LCD, backlit
Pixel area
115 x 78 mm [ 4 1/2" x 3 1/16"]
Resolution
1/2 VGA (480 x 320 pixel)
Color depth
16 grey scales
Power supply
Battery type
Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time
< 5 hours in the instrument
Charger, input
110-240 V / 50-60 Hz
Charging temperature
0°C ... 50°C [ 32 °F ... 122 °F]
Computer
Processor
Intel Strong ARM 206 MHz
Keyboard
2 joysticks and 12 keys for right-hand or left-hand operation. Keyboard illumination controlled by ambient light.
Memory
Internal: 64 MB RAM; Compact Flash: 1 GB or 4 GB
Serial interface
RS 232, <115 kBaud
USB interface
USB host for printing; USB slave for data exchange with OMNITREND
Ethernet interface
10 Mbit (10Base T), 10 Mbit (10Base T)
Environment / General
Connectors
Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to
VIBSCANNER
Housing
Aluminium
Dimensions
250 x 220 x 37 mm [ 9 13/16" x 8 11/16" x 1 7/16" ] (LxWxH)
Weight
approx. 2.3 kg [81 oz]
Environmental protection
IP65, dust and splash-proofed
Temperature range
-10°C ... 60°C (Operation), [ 14 °F ... 140°F]
-20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Intrinsic safety details
Marking
II 2G Ex ib IIC T4
Temperature range
-10 °C ... 60 °C
Also you can check product : NEW Pruftechnik VIBXPERT II Vibration Analysis System and Balancing Tool
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.VIBXPERT EX collects field data including vibration information, bearing condition, inspection and process data and seamlessly integrates with the OMNITREND Center software platform for in-depth analysis.
USED Pruftechnik Rotalign Ultra IS Laser Shaft Alignment System (Rotalign Ultra IS)
The Rotalign Ultra iS, the highly versatile laser shaft alignment system by Pruftechnik, will help to reduce machine downtime, increase machine efficiency, increase productivity, lower energy costs and therefore save money. Ideal for internal combustion engines, piston compressors, crosshead guides, pumps, stern tubes and extruder barrels. Align steam and gas turbine internals, bearing rings, diaphragms, inner shells and casings.
Precision alignment guarantees
Reduced energy consumption
Reduction in bearing, seal, shaft and coupling failures
Decreased bearing and coupling temperatures
Reduced vibration
Improved product quality
Advantages of laser shaft alignment
Easy to use single laser technology with patented continuous sweep measurement from PRÜFTECHNIK lets you take hundreds of readings, with the highest accuracy, under the worst of field conditions, ensuring fast yet easy alignments.
User-friendly and intuitive
Accurate and precise
Take unlimited readings at any desired positions
Measurement repeatability and documentation through a measurement table offering powerful data analysis capabilities
Live monitoring of machine corrections in vertical and horizontal directions simultaneously
Documentation and professional reports in color, with pictures and graphs
SPECS :
CPU
Mavell XScale Processor running at 520 MHz
Memory
64 MB RAM, 64 MB Internal Flash, 1024 MB Compact Flash Memory
Display
Type: Transmissive (sunlight-readable) backlit TFT color graphic display
Resolution: Full VGA, 640 x 480 pixels;
Dimensions: 145 mm/ 5.7 inch diagonal
Keyboard elements: navigation cursor cross with up, clear and menu keys; Alphanumeric keyboard with dimensions, measure and results hard keys
LED indicators
4 LEDs for laser status and alignment condition
2 LEDs for wireless communication and battery status
Power supply
Operating time: 25 hours (using Li-Ion rechargeable battery) 12 hours (using disposable batteries) typical use (based upon an operating cycle of 25% measurement, 25% computation and 50% ‘sleep’ mode)
Lithium-Ion rechargeable battery: 7.2 V / 6.0 Ah
Disposable batteries: 6 x 1.5 V IEC LR14 (“C“) [optional]
External interface
2 x USB host for printer, keyboard or PC communication
1 x USB slave for printer, keyboard or PC communication
RS232 (serial) for receiver
I-Data socket for receiver
Integrated Bluetooth® wireless communication, Class 1, transmitting power 100mW
AC adapter/charger socket
Environmental protection
IP 65 (dustproof and water spray resistant), shockproof
Relative humidity 10% to 90%
Temperature range
Operation: 0°C to 45°C [32°F to 113°F]
Storage: -20°C to 60°C [-4°F to 140°F]
Weight
1 kg (without battery)
CE conformity
EC guidelines for electric devices (2004/108 EEC) are fulfilled
INCLUDED :
- Pruftechnik Rotalign Ultra IS Laser Shaft Alignment System w/ (BC# 42488-L/T*)
Installed Applications:
Program Manager V3.11
Shaft Alignment V3.11
- Rotalign SensALIGN Laser ALI 4.910
-Rotalign SensALIGN Sensor ALI 4.900
-Rotalign PC/USB Cable
-Rotalign USB/Peripheral Device Cable
-Rotalign SensALIGN Sensor & Laser Cable
-Rotalign SensALIGN Charger/Adapter
-Rotalign Set Chain Bracket Set ALI 2.113
-Vibration Check Probe
-(2) Allen Wrenches
-Rotalign Pocket Guide
-(27) Support Posts w/ Case
-AC Adapter/Charger
-Hard Copy User Manual
-Hard Carrying Case
Also you can check product : USED Pruftechnik Rotalign Touch Laser Shaft Alignment System
The Rotalign Ultra iS, the highly versatile laser shaft alignment system by Pruftechnik, will help to reduce machine downtime, increase machine efficiency, increase productivity, lower energy costs and therefore save money. Ideal for internal combustion engines, piston compressors, crosshead guides, pumps, stern tubes and extruder barrels. Align steam and gas turbine internals, bearing rings, diaphragms, inner shells and casings.
NEW Pruftechnik Vibxpert 3 Balancer - Vibration Analysis and Balancing (Vibxpert 3)
VIBXPERT 3 BALANCER
The VibXpert 3 Balancer is a precision smart device designed for today’s workforce. Fast, intuitive, and user-friendly, it’s easy to operate even in the toughest environments. Even non-experts can use the VibXpert 3 to identify unbalance, correct it, and get right back to work.
The VibXpert 3 Balancer has six synchronous channels so that it can easily record multi-channel vibration measurements. Take measurements from multiple angles on the asset and its components. Record measurements simultaneously and compare them to historical data. Go straight to the root cause of the unbalance and correct it, right at the source.
An interactive touchscreen display guides workers through every step of the process. Teams can view measurement data on one convenient dashboard. Get step-by-step guidance on correcting the unbalance, and then measure again until the unbalance is thoroughly resolved.
VibXpert 3 puts cutting-edge diagnostic power in your hands. By making it easy to spot unbalance issues, the tool ensures that teams can fix issues early – before they grow into expensive, dangerous problems. The result? Greater uptime, more productivity, and lower maintenance costs.
Fast, accurate, advanced balancing device
Best practice and customizable machine templates
Modern data processing: 6 synchronous analog channels
Enhanced balancing reports
Simplified data management and analysis
Captures balancing data, overall vibration values, and spectral data
Large, user-friendly touchscreen
Dual-redundant button configuration
IP-65 rated, shockproof, scratch resistant and drop proof
The mobile solution for machinery health monitoring
The VibXpert 3 Balancer is an advanced smart condition monitoring field balancing tool that enables users to quickly and effectively correct unbalance faults.
With the VibXpert 3 Balancer, users can:
Increase the reliability of their machinery by reducing excessive machine vibration levels
Improve safety by reducing potential equipment hazards
Improve uptime by promptly identifying and correcting unbalance
Help meet industry standards and regulatory compliance requirements
Improve energy efficiency of rotating machinery, providing cost savings
Maximize the efficiency, quality, and accuracy of field balancing jobs
The result is extended peak operating asset performance, more effective resource use, and increased business value from operations.
TECHNOLOGY
The next-generation field balancing solution.
Unbalance, resulting from uneven mass distribution around a rotational axis is the leading cause of unplanned downtime and costly damage.
Today, machines operate at variable speeds, sometimes near their engineered capacity, increasing the risk of resonant vibration. Balanced machines mitigate this risk. The VibXpert 3 Balancer offers a highly efficient and user-centric experience, faster balancing results with better insights, and enhanced fault detection on rotating assets.
Machine templates
It boasts an interactive user interface with preconfigured and customizable machine templates, reducing the complexity of the balancing process.
Modern data processing
Its modern data processing capability, optimized software-based calculations from raw sensor data offers faster measurements, complete insights during balancing (including overall vibration levels, FFT spectra, phase, and time waveform).
6-channel measurements
VibXpert 3 Balancer enhances fault detection through synchronous 6-channel measurement, enabling users to minimize overall vibration levels simultaneously across all machine measurement points
Enhanced balancing reports
Balancing reports encompassing all necessary information for users, including overall vibration levels, spectral graphs, polar plots, and machinery details, among others.
SPECS :
Model
VIBXPERT 3
Number of Analog Channels
6
Number of Trigger Points
2
Sampling rate
Up to 131 kHz per channel (trigger 1048 kHz)
Viewing Angle
<150°
Dynamic Range
108 dB
Connector
1 and 4: Triaxial sensor, single axial sensor, and Vibcode
2, 3, 5, 6: Single axial sensor
Signal Processing
6 x 24 bit ADCs (trigger 2 x 14 bit)
RPM
10 – 120 000 1/min / ±0.010/00 or ±1 1/min (the lower accuracy is applicable)
Typical Operation Time
8 hrs
Dimensions (L x W x H)
326 x 210 x 56 mm (12.83 x 8.27 x 2.2 in)
Weight
2.2 kg (77.6 oz)
Also you can check product : NEW Pruftechnik VIBSCANNER 2 EX High-Speed Vibration Measurement Tool
The VibXpert 3 Balancer is a precision smart device designed for today’s workforce. Fast, intuitive, and user-friendly, it’s easy to operate even in the toughest environments. Even non-experts can use the VibXpert 3 to identify unbalance, correct it, and get right back to work.
The VibXpert 3 Balancer has six synchronous channels so that it can easily record multi-channel vibration measurements. Take measurements from multiple angles on the asset and its components. Record measurements simultaneously and compare them to historical data. Go straight to the root cause of the unbalance and correct it, right at the source.
An interactive touchscreen display guides workers through every step of the process. Teams can view measurement data on one convenient dashboard. Get step-by-step guidance on correcting the unbalance, and then measure again until the unbalance is thoroughly resolved.
VibXpert 3 puts cutting-edge diagnostic power in your hands. By making it easy to spot unbalance issues, the tool ensures that teams can fix issues early – before they grow into expensive, dangerous problems. The result? Greater uptime, more productivity, and lower maintenance costs.
Fast, accurate, advanced balancing device
Best practice and customizable machine templates
Modern data processing: 6 synchronous analog channels
Enhanced balancing reports
Simplified data management and analysis
Captures balancing data, overall vibration values, and spectral data
Large, user-friendly touchscreen
Dual-redundant button configuration
IP-65 rated, shockproof, scratch resistant and drop proof
The mobile solution for machinery health monitoring
The VibXpert 3 Balancer is an advanced smart condition monitoring field balancing tool that enables users to quickly and effectively correct unbalance faults.
With the VibXpert 3 Balancer, users can:
Increase the reliability of their machinery by reducing excessive machine vibration levels
Improve safety by reducing potential equipment hazards
Improve uptime by promptly identifying and correcting unbalance
Help meet industry standards and regulatory compliance requirements
Improve energy efficiency of rotating machinery, providing cost savings
Maximize the efficiency, quality, and accuracy of field balancing jobs
The result is extended peak operating asset performance, more effective resource use, and increased business value from operations.
TECHNOLOGY
The next-generation field balancing solution.
Unbalance, resulting from uneven mass distribution around a rotational axis is the leading cause of unplanned downtime and costly damage.
Today, machines operate at variable speeds, sometimes near their engineered capacity, increasing the risk of resonant vibration. Balanced machines mitigate this risk. The VibXpert 3 Balancer offers a highly efficient and user-centric experience, faster balancing results with better insights, and enhanced fault detection on rotating assets.
Machine templates
It boasts an interactive user interface with preconfigured and customizable machine templates, reducing the complexity of the balancing process.
Modern data processing
Its modern data processing capability, optimized software-based calculations from raw sensor data offers faster measurements, complete insights during balancing (including overall vibration levels, FFT spectra, phase, and time waveform).
6-channel measurements
VibXpert 3 Balancer enhances fault detection through synchronous 6-channel measurement, enabling users to minimize overall vibration levels simultaneously across all machine measurement points
Enhanced balancing reports
Balancing reports encompassing all necessary information for users, including overall vibration levels, spectral graphs, polar plots, and machinery details, among others.
SPECS :
Model
VIBXPERT 3
Number of Analog Channels
6
Number of Trigger Points
2
Sampling rate
Up to 131 kHz per channel (trigger 1048 kHz)
Viewing Angle
<150°
Dynamic Range
108 dB
Connector
1 and 4: Triaxial sensor, single axial sensor, and Vibcode
2, 3, 5, 6: Single axial sensor
Signal Processing
6 x 24 bit ADCs (trigger 2 x 14 bit)
RPM
10 – 120 000 1/min / ±0.010/00 or ±1 1/min (the lower accuracy is applicable)
Typical Operation Time
8 hrs
Dimensions (L x W x H)
326 x 210 x 56 mm (12.83 x 8.27 x 2.2 in)
Weight
2.2 kg (77.6 oz)
Also you can check product : NEW Pruftechnik VIBSCANNER 2 EX High-Speed Vibration Measurement Tool
The VibXpert 3 Balancer is an advanced smart condition monitoring field balancing tool that enables users to quickly and effectively correct unbalance faults. Increase the reliability of their machinery by reducing excessive machine vibration levels. Improve safety by reducing potential equipment hazards, Improve uptime by promptly identifying and correcting unbalance, Help meet industry standards and regulatory compliance requirements, Improve energy efficiency of rotating machinery, providing cost savings, Maximize the efficiency, quality, and accuracy of field balancing jobs.
USED Pruftechnik Vibxpert II Vibration Analyzer and Dynamic Balancer (Vibxpert II)
VIBXPERT II offers all these powerful analysis tools in one user friendly system. VIBXPERT II has a modular structure that allows you to upgrade the device at any time from a basic package for fast route-based data collection to a full-blown 2 channel analyzer with advanced analysis functionalities.
Besides the high-end analysis measurements capabilities, field balancing options and route data collection functionalities, VIBXPERT II also offers a special machine template mode which is typically used to perform acceptance measurements of newly produced or installed rotating equipment such as fans, pumps, electric motors or generators. The machine templates includes all relevant machine information such as RPM, roller bearing defect frequencies, warning and alarm thresholds, which allow you to provide a standardized, fast and easy acceptance inspection.
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine. The robust design enables both fast and complex interventions. Whether in clinically clean systems, or harsh industrial environments. VIBXPERT II sets the standard in mobile machine and plant condition monitoring.
In addition to reliable, fast, and highly effective data analysis, the VIBXPERT II can also be used for operational balancing. This makes the VIBXPERT II the most powerful and effective device in mobile condition monitoring. VIBXPERT II is compatible with PRUFTECHNIK's own OMNITREND Center analysis software, enabling highly efficient and precise analysis results. Center analysis software, enabling highly efficient and precise analysis results.
Specs:
Input
Analog, Vibration, 2x : Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range : DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range : 96 dB (measurement) / 136 dB (total)
Sampling frequency : up to 131 kHz per channel
Impedance : 90 kOhm, with cable VIB 5.433
Analog, Temperature, 1x : Thermocouple (type K)
Digital, Pulse/ Tacho, 1x : RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage : ± 26 V
Switching threshold for 0 V ... 26 V signal : max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal : min. -8 V rising, max. -10 V falling
Pulse width : < 0.1 ms
Output
Stroboscope control : TTL
Frequency range : 0 - 500 Hz
Resolution : 0.05 Hz
Signal-Out : Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range : 0.5 Hz - 40 kHz
Output impedance : 100 Ohm
Measurement range / Accuracy
Vibration acceleration : depends on the sensor connected
Shock pulse : -10 ...80 dBsv / ± 3dBsv
RPM : 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K : -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled : Frequency response acc to ISO 2954
Display
Type : TFT-LCD, backlit
Pixel area : 116 x 87 mm
Resolution : VGA (640 x 480 pixel) with 140 ppi
Color depth : 18 bit (262144 colors)
Power supply
Battery type : Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time : < 5 hours in the instrument
Charger, input : 110-240 V / 50-60 Hz
Charging temperature : 0°C ... 50°C [ 32 °F ... 122°F]
Computer
Processor : Marvell PXA320 806 MHz
Keyboard : 1 navigation pad and 7 keys (Zoom, Escape, Function, Help, Menu, On/Off); Keyboard illumination controlled by ambient light.
Memory : Internal: 128 MB DDR RAM; Compact Flash: 2 GB to 8 GB (interchangeable)
Serial interface : RS 232, <115 kBaud USB interface USB 2.0
Ethernet interface : 100 Mbit (100Base T), 10 Mbit (10Base T)
Environment / General
Connectors : Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing : ABS plastics
Dimensions : 186 x 162 x 52 mm (LxWxH), [ 7 5/16" x 6 3/8" x 2 1/16" ]
Weight : approx. 1.1 kg [39 oz]
Environmental protection : IP65, dust and splash-proofed
Temperature range : -10°C ... 60°C (Operation), [ 14 °F ... 140°F], -20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Included:
1 x PRUFTECHNIK VIBXPERT II device as new
NEW VIB 6.142R sensor magnetic adapter
NEW charger with adapters for all countries
NEW USB cable to connect to a pc
NEW VIB 5.436 spiral lead to connect to sensor
NEW 2GB sd memory card
Certifications, calibrated until 2022
Omnitrend software
protective carrying bag shoulder strap
Hard 2 wheels case with extendable handle
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - VIbration Analysis and Balancing
Besides the high-end analysis measurements capabilities, field balancing options and route data collection functionalities, VIBXPERT II also offers a special machine template mode which is typically used to perform acceptance measurements of newly produced or installed rotating equipment such as fans, pumps, electric motors or generators. The machine templates includes all relevant machine information such as RPM, roller bearing defect frequencies, warning and alarm thresholds, which allow you to provide a standardized, fast and easy acceptance inspection.
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine. The robust design enables both fast and complex interventions. Whether in clinically clean systems, or harsh industrial environments. VIBXPERT II sets the standard in mobile machine and plant condition monitoring.
In addition to reliable, fast, and highly effective data analysis, the VIBXPERT II can also be used for operational balancing. This makes the VIBXPERT II the most powerful and effective device in mobile condition monitoring. VIBXPERT II is compatible with PRUFTECHNIK's own OMNITREND Center analysis software, enabling highly efficient and precise analysis results. Center analysis software, enabling highly efficient and precise analysis results.
Specs:
Input
Analog, Vibration, 2x : Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range : DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range : 96 dB (measurement) / 136 dB (total)
Sampling frequency : up to 131 kHz per channel
Impedance : 90 kOhm, with cable VIB 5.433
Analog, Temperature, 1x : Thermocouple (type K)
Digital, Pulse/ Tacho, 1x : RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage : ± 26 V
Switching threshold for 0 V ... 26 V signal : max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal : min. -8 V rising, max. -10 V falling
Pulse width : < 0.1 ms
Output
Stroboscope control : TTL
Frequency range : 0 - 500 Hz
Resolution : 0.05 Hz
Signal-Out : Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range : 0.5 Hz - 40 kHz
Output impedance : 100 Ohm
Measurement range / Accuracy
Vibration acceleration : depends on the sensor connected
Shock pulse : -10 ...80 dBsv / ± 3dBsv
RPM : 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K : -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled : Frequency response acc to ISO 2954
Display
Type : TFT-LCD, backlit
Pixel area : 116 x 87 mm
Resolution : VGA (640 x 480 pixel) with 140 ppi
Color depth : 18 bit (262144 colors)
Power supply
Battery type : Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time : < 5 hours in the instrument
Charger, input : 110-240 V / 50-60 Hz
Charging temperature : 0°C ... 50°C [ 32 °F ... 122°F]
Computer
Processor : Marvell PXA320 806 MHz
Keyboard : 1 navigation pad and 7 keys (Zoom, Escape, Function, Help, Menu, On/Off); Keyboard illumination controlled by ambient light.
Memory : Internal: 128 MB DDR RAM; Compact Flash: 2 GB to 8 GB (interchangeable)
Serial interface : RS 232, <115 kBaud USB interface USB 2.0
Ethernet interface : 100 Mbit (100Base T), 10 Mbit (10Base T)
Environment / General
Connectors : Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing : ABS plastics
Dimensions : 186 x 162 x 52 mm (LxWxH), [ 7 5/16" x 6 3/8" x 2 1/16" ]
Weight : approx. 1.1 kg [39 oz]
Environmental protection : IP65, dust and splash-proofed
Temperature range : -10°C ... 60°C (Operation), [ 14 °F ... 140°F], -20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Included:
1 x PRUFTECHNIK VIBXPERT II device as new
NEW VIB 6.142R sensor magnetic adapter
NEW charger with adapters for all countries
NEW USB cable to connect to a pc
NEW VIB 5.436 spiral lead to connect to sensor
NEW 2GB sd memory card
Certifications, calibrated until 2022
Omnitrend software
protective carrying bag shoulder strap
Hard 2 wheels case with extendable handle
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - VIbration Analysis and Balancing
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
- 1