Vibration Analyzer
A vibration analyzer measures vibration for the preventative maintenance of manufacturing equipment. A vibration analyzer also is used to assess a machine's axis of rotation. If there is rotating unbalance, the rotor may be exchanged during a scheduled downtime of the machine.
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer is a portable hardware monitoring device that supports dual-channel vibration data collection, analysis, and balancing. Use the device to collect data from sensors on a route, for machine-side analysis and diagnosis, and on-site dynamic balance correction. The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The Commtest vb7 and Scout100-Ex Two-Channel Vibration Analyzers are suitable for every level of vibration analyst - From novice to expert . These instruments offer the power and convenience of dual-channel measurement and dual-plane balancing. Their balancing functions enable quick diagnosis and correction of dynamic unbalance. The SCOUT100-Ex and vb7 instruments combine accuracy, intuitive operation, ease of use, and outstanding storage capacity to ensure a premium return on investment. The SCOUT100-Ex is certified for an ATEX Zone 2 hazardous rating, whereas the vb7 is rated for CSA Class 1, Division 2.
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer is a portable hardware monitoring device that supports dual-channel vibration data collection, analysis, and balancing. Use the device to collect data from sensors on a route, for machine-side analysis and diagnosis, and on-site dynamic balance correction.
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues. This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
VIBXPERT EX records all types of machine vibrations, bearing conditions as well as process and visual inspection data, and transfers this information to the OMNITREND maintenance software for evaluation, archiving and documentation.
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.
The VIBER X4 is a state of the art route-based vibration analyzer developed for advanced condition maintenance with top class accuracy.
VIBER X4 is designed to work together with SpectraPro, PC software for advanced vibration analysis.
Bright high-resolution display makes it easy to see perfect results even in bright conditions, and Inspect equipment during maintenance to confirm a successful repair.
VIBER X5VIBER X5 MK III is an advanced vibration analyzer, together with SpectraPro® PC software it provides a complete package for redictive condition maintenance.
VIBER X5 MK III™ is capable of measuring, processing, displaying and storing a wide range of measurement parameters. You can collect various types of field data; examples are vibration information,bearing analyze, temperature, speed and other process variables that enables you to expand its functionality by adding new measurements to improve your analysis capabilities.
Developed for vibration analysts, machine operators, and maintenance technicians. Easy to use, powerful for basic condition monitoring. Helps in maintaining machine reliability and verifying machinery repair. Store and trend condition data with Trend View.
The VibXpert 3 Balancer is an advanced smart condition monitoring field balancing tool that enables users to quickly and effectively correct unbalance faults. Increase the reliability of their machinery by reducing excessive machine vibration levels. Improve safety by reducing potential equipment hazards, Improve uptime by promptly identifying and correcting unbalance, Help meet industry standards and regulatory compliance requirements, Improve energy efficiency of rotating machinery, providing cost savings, Maximize the efficiency, quality, and accuracy of field balancing jobs.
The Viper II Vibration Analyzer is a versatile yet compact instrument that combines all of the diverse technologies required for high-end jet engine vibration analysis, transient balance, rotor track and balance, fan trim balance, propeller balance and acoustic analysis into one tool. All of these maintenance functions can be easily performed on virtually any airframe and/or engine type using the VIPER II. Accurate High-Speed Run-up & Coast-Down Transient Surveys.
The Viper 2E Vibration and Performance Analyzer is a compact instrument with all the power of the Viper and Viper 2 platforms. Designed for the harshest of environments with EMI Shielding and new cabling. Vibration and Acoustic Analysis on Jet Engines and Airframes, Transient Balance, Fan Trim Balance, and even Propeller Balance features are ready to go anywhere you are.
The COBRA II dual channel vibration analyzer is a versatile yet compact instrument that combines all of the diverse technologies required for high-end engine vibration analysis, rotor track and balance, and propeller balance into one tool. With the Cobra II, all of these maintenance functions can be easily performed on virtually any airframe and engine type, such as a 2-propeller airplane. The COBRA II has a large, high-resolution, transmissive, full-color display with a super-bright LED backlight that can be easily viewed in direct sunlight.
Increase your plane or helicopter’s performance today with the ACES Systems ProBalancer Analyzer. For those who need a little more horsepower than the ProBalancer Sport, we offer the Model 2020PL ProBalancer Vibration Analyzer Balancer. It provides step-by-step on-screen instructions for performing propeller balancing, rotor track and balance measurements and vibration surveys at an affordable price.
EMERSON CSI 2140 is an electronic test equipment known for its versatility and accuracy when testing a variety of parameters including power quality, energy, and waveforms. This device is made with the latest in cutting-edge technology, so users can expect only the highest levels of accuracy and reliability, along with easy-to-use and easy-to-understand interfaces. Firstly, EMERSON 2140 is an AC/DC 30 MHz signal analyzer that is designed for testing and measuring power quality, energy consumption, and waveforms. It is capable of making calibration-free threshold measurements and frequency response measurements with a 0.1 Hz resolution.
The Emerson CSI 2130 Machinery Health Analyzer is a highly efficient tool designed to streamline maintenance activities. With its fast data collection, ease of operation, and advanced diagnostics, it provides actionable information to prioritize maintenance tasks effectively. This versatile analyzer is equipped with a range of features, including dual-channel vibration analysis, embedded intelligence, peak detection for bearing and gear analysis, and motor current analysis. It is lightweight, has a large color display, and is IP-65 rated for durability in industrial environments.
The EXPERT data collector package is especially adapted to all users who have good knowledge of vibration analysis and can provide reliable diagnosis and maintenance recommendation on their own. The EXPERT data collector package will provide them with the most productive tool of the market, thus helping them to drastically save time.
FALCON offers the most efficient solution at each step of the implementation of condition monitoring in your factory. The defects of your rotating machines can thusbe detected several months in advance and the maintenance operations can be scheduled, which avoids unscheduled shutdowns and associated production losses.
The ULTIMATE package correspond to a full option FALCON with Expert data collection capabilities and all optional modules activated, coming at a very attractive price.
FALCON offers the most efficient solution at each step of the implementation of condition monitoring in
your factory. The defects of your rotating machines can thus be detected several months in advance and the maintenance operations can be scheduled, which avoids unscheduled shutdowns and associated production losses.
The result of 30 years of experience in condition monitoring of rotating machines. FALCON is an innovative vibration measurement and analysis tool that makes condition-based maintenance available to all users. Three-axis wireless sensor, taking simultaneous vibration measurements in all directions, built-in strobe light for rotation speed measurement, built in laser pyrometer for bearing temperature measurement built in camera for easy machine identification, sensor positioning, and report illustration
embedded Accurex™ automatic diagnostic , 4 analog channels for synchronous measurement, in addition to the trigger input.
Impaq Plus is a fully rugged portable 4 channel real-time analyzer built for advanced noise and vibration measurements in the field. Manufactured with a rugged enclosure by a dual injection molding process and protective sealing to provide an IP 65 rating for measurement in harsh environments. Equipped with a large 10.1” multi-touch color display, information is not only on display, but a more intuitive user interface with keypads on the left side.
Impaq Plus acquires measurement signal with precision 24 bit sigma delta AD converters to provide a high dynamic range and a up to 40 kHz maximum bandwidth.
USED Bently Nevada Scout100-Ex Vibration Data Collector, Analyzer and Balancer (Scout100-Ex)
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer is a portable hardware monitoring device that supports dual-channel vibration data collection, analysis, and balancing. Use the device to collect data from sensors on a route, for machine-side analysis and diagnosis, and on-site dynamic balance correction.
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer is a portable hardware monitoring device that supports dual-channel vibration data collection, analysis, and balancing. Use the device to collect data from sensors on a route, for machine-side analysis and diagnosis, and on-site dynamic balance correction.
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The device includes a complete suite of advanced recording and analysis capabilities, including 6Pack recordings, coastdown and long time waveform.
The SCOUT100EX offers plenty of storage and long battery life. The device comes with a five year warranty. It works with System 1 software.
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer offers the following features:
- Up to two-channel, simultaneous on-route recordings
- Unique 6Pack recording system
- DC-coupled sensor support
- One GB memory plus virtually unlimited spectra and waveform storage
- Ten hours of battery life
- 6,400 lines FFT resolution
- 40 kHz Fmax
- Wide measurement range — 1,000 g, 25,000mm/s, 2,500mm
- Two-plane balancing
- Laser speed sensor for automatic capture of machine running speed
- Keyphasor tach mode
- Dynamic range ≥ 95 dB
- USB host port for data transfer to external USB memory
- Excellent ergonomics for walk-around data collection
- High contrast, backlit and direct-sunlight readable LCD
- True left and right-handed operation
- Sensor cable self-test feature
- Lightweight, rugged IP65 rated case
- Five-year warranty on the instrument hardware
- ATEX and IECEx Zone 2 hazardous location certification
- Field-upgradable Proflash system and free firmware updates for five years
Specifications
Sensors
Sensor input
Two Channels Simultaneous sampling
Compatible sensor types
Accelerometer, velocity,displacement, current
AC coupled range
16 V peak-peak
Allows for ± 8 V sensor output
swing (± 80 g)
DC coupled ranges
0 to 20 V
-10 to 10 V
-20 to 0 V
E.g. for reading prox-probe gap
Connectors
Safety feature: Break-free inline connector
Analog to digital conversion
24-bit ADC
Sensor excitation current
0 mA or 2.2 mA (configurable),
24 V maximum
2.2 mA required power for
IEPE/ICP-type accelerometer
Sensor detection
Warns if short circuit or not connected
Waveform Display
Number of samples
1024, 2048, 4096, 8192, 16,384
Time scale
10 ms to 256 seconds or orders based from 1 to 999 revs
Time synchronous averages
1, 2, 4, 8, 16, 32, 64, 128
Only available when tachometer is triggered
Long time waveform
25 Hz to 40 kHz
Fmax
20 kHz dual channel
Long time waveform duration
14.7 million samples (total over channels)
E.g. for Fmax 1 kHz
Fsample = 2.56 kHz and
Duration = 1.6 hrs
Tachometer
Sensor
Laser sensor with reflective tape Sensor triggers on beam reflection
Laser sensor range
10 cm to 2 m nominal
Range depends on size of reflective tape
Other sensor types supported
Contact, TTL Pulse, Keyphasor
Instrument has optically isolated input
Power supply to sensor
5 V, 50 mA
TTL pulse rating
3.5 V (4 mA) min
28 V (5 mA) max Off-state 0.8 V
Keyphasor threshold
7.7 ± 0.5 V , 13.2 ± 0.8 V , 18.5 ± 1 V , Nominally 8 V, 13 V, 18 V
Speed range
10 RPM to 300,000 RPM (0.2 Hz to 5 kHz)
Pulse width at least 0.1 ms
Accuracy
± 0.1 %
Output to drive strobe
Up to 140 Hz (8400 CPM) Typical Depends on strobe type Special cable required
Logging and Analysis
Output formats
LCD screen, Ascent, XML, System 1
Data storage
Dual 1 GB non-volatile flash memories, Database mirror copy on second flash memory
Data storage structure
Folders/machines/points/locations/routes
No limits are applied 50 character names
Max folder size
10,000 measurement locations
Parameter Indication
Maximum levels (peak)
> 1000 g (10,000 m/s2)
> 1000 in/sec (25,000 mm/s)
> 20 in (500 mm)
> 10,000 Amps
Effective limit is sensor sensitivity
and output voltage
Dynamic signal range
> 95 dB typical at 400 line resolution
Harmonic distortion
Less than -70 dB typical Other distortions and noise are lower
Units
g or m/s2 or adB, in/s or mm/s or vdB, mil or mm or µm amps
0-peak, peak-peak or RMS, Auto-scale by 1000x when required US and SI options for adB and vdB
Magnitude & cursors
Overall RMS value Waveform True pk-pk , Dual cursors Harmonics, Digital readouts on chart
Base accuracy
± 1% of readings
approximately 0.1 dB
For DC level — % of full scale
For AC signal — % of reading
High frequency attenuation
≤ 0.1 dB >100 Hz to 10 kHz
≤ 3 dB >10 kHz to 40 kHz
Attenuation tolerances are in addition to base accuracy.
AC coupling attenuation
≤ 0.1 dB 10 Hz to <100 Hz
≤ 3 dB 1 Hz to <10 Hz
Attenuation due to Integration
≤ 0.1 dB 1 Hz to <100 Hz
≤ 1.5 dB 0.2 Hz to <1 Hz
≤ 0.1 dB 10 Hz to <100 Hz
≤ 1.5 dB 1 Hz to <10 Hz
Low frequency mode:
When Coupling = DC and Fmax
≤ 100 Hz
Normal mode is applicable in all other cases. Values apply to single integration.
(Acceleration to velocity) Double the values for double integration (Acceleration to displacement)
Balancing
Planes
Up to 2 planes, 2 sensors
Speed range
30 to 60,000 RPM
Measurement type
Acceleration, velocity, displacement
Weight modes
Angle 0° to 360°, fixed position,
circumference arc
E.g. weights on fan blades, linear distance around circumference
Remove trial weights
Yes/No Automatic recalculation
Manual data entry
Yes Allows re-entry of previous balance jobs
Storage
Against machines in data structure,No limits applied
Mechanical
Size 9.9" W x 5.8" L x 2.4" H (252 x 148 x 60 mm)
Weight 2.7 lb (1.2 kg)
Including battery and strap
Spectrum Display
Fmax ranges
25, 50, 100, 125, 150, 200, 300,400, 500, 600, 800, 1000, 1200,
1600, 2000, 2500, 3000, 4000, 5000, 6000, 8000, 10,000,15,000, 20,000, 30,000, 40,000 Hz
Or equivalent CPM values, Or orders-based from 1X to 999X
Fmin possible range
0 to Fmax
Instrument zeroes all spectral lines below Fmin.
Resolution
400, 800, 1600, 3200, 6400
lines. 3200 lines max. for dual channel measurements
Frequency scale
Hz, CPM, Orders, Linear scale with zooming
Amplitude scale
Acceleration, velocity, displacement or current Linear or log scales, auto or manual scaling.
Window shapes Hanning Rectangular
Overlap
(0, 12.5, 25, 37.5, 50, 62.5, 75, 87.5) %
Depends on Fmax and number of lines
Number of averages
1, 2, 4, 8, 16, 32, 64, 128
Increases sampling time proportionally
Averaging types
Linear, exponential, peak hold, synchronous
Demodulation bandwidths
23 bandwidth options
From 125 Hz to 1250 Hz Up to 16 kHz to 20 kHz
6Pack
Up to 40 kHz & 3200 lines (1 channel)
Up to 20 kHz & 1600 lines (2 channels)
Spectrum and waveform for low-frequency,high-frequency demodulation
Order tracking
Up to 6 kHz Fmax, orders based Tachometer required Mounted on high-speed shaft
Order tracking - Distortion
Less than -65 dB
Within 50% to 200% speed variation during recording
Display and Communication
Display
Graphic Grayscale LCD , White LED Backlight
Resolution & size
480 x 320 (HVGA), 5.5” (140 mm) Readable in direct sunlight
Supported Languages
English, French, Spanish, Portuguese, Russian, Chinese
Communication with PC
US and Ethernet (optional USB dongle), Use PROFLASH to upgrade instrument firmware
USB host port
USB 2.0, supplying 5V, 250mA, Save folders to USB flash drive
Battery and Charger
Battery type
Custom Lithium Ion pack, 7.4 V, 5000 mAh
Operating time
10 hours Backlight on — 60 second timeout
Charger type
Internal charging, automatic control, External power pack 12 V DC, 3 A output
Charge rate
3 A nominal
3 hours for complete charge
Environmental Limits
Operating temperature
14 °F to 122 °F (-10 to 50 °C)
Storage temperature & humidity
-4 °F to 140 °F (-20 to 60 °C), 95% RH, Up to 95 F (35 C), 85% RH if
storage exceeds one month
Ruggedness
4’ (1.2 m) drop onto concrete,IP65
Procedure: 26 drops following
MIL-STD-810F-516.5-IV
Also you can check product : NEW Bently Nevada Scout100-Ex Vibration Data Collector, Analyzer and Balancer
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer is a portable hardware monitoring device that supports dual-channel vibration data collection, analysis, and balancing. Use the device to collect data from sensors on a route, for machine-side analysis and diagnosis, and on-site dynamic balance correction.
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The device includes a complete suite of advanced recording and analysis capabilities, including 6Pack recordings, coastdown and long time waveform.
The SCOUT100EX offers plenty of storage and long battery life. The device comes with a five year warranty. It works with System 1 software.
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer offers the following features:
- Up to two-channel, simultaneous on-route recordings
- Unique 6Pack recording system
- DC-coupled sensor support
- One GB memory plus virtually unlimited spectra and waveform storage
- Ten hours of battery life
- 6,400 lines FFT resolution
- 40 kHz Fmax
- Wide measurement range — 1,000 g, 25,000mm/s, 2,500mm
- Two-plane balancing
- Laser speed sensor for automatic capture of machine running speed
- Keyphasor tach mode
- Dynamic range ≥ 95 dB
- USB host port for data transfer to external USB memory
- Excellent ergonomics for walk-around data collection
- High contrast, backlit and direct-sunlight readable LCD
- True left and right-handed operation
- Sensor cable self-test feature
- Lightweight, rugged IP65 rated case
- Five-year warranty on the instrument hardware
- ATEX and IECEx Zone 2 hazardous location certification
- Field-upgradable Proflash system and free firmware updates for five years
Specifications
Sensors
Sensor input
Two Channels Simultaneous sampling
Compatible sensor types
Accelerometer, velocity,displacement, current
AC coupled range
16 V peak-peak
Allows for ± 8 V sensor output
swing (± 80 g)
DC coupled ranges
0 to 20 V
-10 to 10 V
-20 to 0 V
E.g. for reading prox-probe gap
Connectors
Safety feature: Break-free inline connector
Analog to digital conversion
24-bit ADC
Sensor excitation current
0 mA or 2.2 mA (configurable),
24 V maximum
2.2 mA required power for
IEPE/ICP-type accelerometer
Sensor detection
Warns if short circuit or not connected
Waveform Display
Number of samples
1024, 2048, 4096, 8192, 16,384
Time scale
10 ms to 256 seconds or orders based from 1 to 999 revs
Time synchronous averages
1, 2, 4, 8, 16, 32, 64, 128
Only available when tachometer is triggered
Long time waveform
25 Hz to 40 kHz
Fmax
20 kHz dual channel
Long time waveform duration
14.7 million samples (total over channels)
E.g. for Fmax 1 kHz
Fsample = 2.56 kHz and
Duration = 1.6 hrs
Tachometer
Sensor
Laser sensor with reflective tape Sensor triggers on beam reflection
Laser sensor range
10 cm to 2 m nominal
Range depends on size of reflective tape
Other sensor types supported
Contact, TTL Pulse, Keyphasor
Instrument has optically isolated input
Power supply to sensor
5 V, 50 mA
TTL pulse rating
3.5 V (4 mA) min
28 V (5 mA) max Off-state 0.8 V
Keyphasor threshold
7.7 ± 0.5 V , 13.2 ± 0.8 V , 18.5 ± 1 V , Nominally 8 V, 13 V, 18 V
Speed range
10 RPM to 300,000 RPM (0.2 Hz to 5 kHz)
Pulse width at least 0.1 ms
Accuracy
± 0.1 %
Output to drive strobe
Up to 140 Hz (8400 CPM) Typical Depends on strobe type Special cable required
Logging and Analysis
Output formats
LCD screen, Ascent, XML, System 1
Data storage
Dual 1 GB non-volatile flash memories, Database mirror copy on second flash memory
Data storage structure
Folders/machines/points/locations/routes
No limits are applied 50 character names
Max folder size
10,000 measurement locations
Parameter Indication
Maximum levels (peak)
> 1000 g (10,000 m/s2)
> 1000 in/sec (25,000 mm/s)
> 20 in (500 mm)
> 10,000 Amps
Effective limit is sensor sensitivity
and output voltage
Dynamic signal range
> 95 dB typical at 400 line resolution
Harmonic distortion
Less than -70 dB typical Other distortions and noise are lower
Units
g or m/s2 or adB, in/s or mm/s or vdB, mil or mm or µm amps
0-peak, peak-peak or RMS, Auto-scale by 1000x when required US and SI options for adB and vdB
Magnitude & cursors
Overall RMS value Waveform True pk-pk , Dual cursors Harmonics, Digital readouts on chart
Base accuracy
± 1% of readings
approximately 0.1 dB
For DC level — % of full scale
For AC signal — % of reading
High frequency attenuation
≤ 0.1 dB >100 Hz to 10 kHz
≤ 3 dB >10 kHz to 40 kHz
Attenuation tolerances are in addition to base accuracy.
AC coupling attenuation
≤ 0.1 dB 10 Hz to <100 Hz
≤ 3 dB 1 Hz to <10 Hz
Attenuation due to Integration
≤ 0.1 dB 1 Hz to <100 Hz
≤ 1.5 dB 0.2 Hz to <1 Hz
≤ 0.1 dB 10 Hz to <100 Hz
≤ 1.5 dB 1 Hz to <10 Hz
Low frequency mode:
When Coupling = DC and Fmax
≤ 100 Hz
Normal mode is applicable in all other cases. Values apply to single integration.
(Acceleration to velocity) Double the values for double integration (Acceleration to displacement)
Balancing
Planes
Up to 2 planes, 2 sensors
Speed range
30 to 60,000 RPM
Measurement type
Acceleration, velocity, displacement
Weight modes
Angle 0° to 360°, fixed position,
circumference arc
E.g. weights on fan blades, linear distance around circumference
Remove trial weights
Yes/No Automatic recalculation
Manual data entry
Yes Allows re-entry of previous balance jobs
Storage
Against machines in data structure,No limits applied
Mechanical
Size 9.9" W x 5.8" L x 2.4" H (252 x 148 x 60 mm)
Weight 2.7 lb (1.2 kg)
Including battery and strap
Spectrum Display
Fmax ranges
25, 50, 100, 125, 150, 200, 300,400, 500, 600, 800, 1000, 1200,
1600, 2000, 2500, 3000, 4000, 5000, 6000, 8000, 10,000,15,000, 20,000, 30,000, 40,000 Hz
Or equivalent CPM values, Or orders-based from 1X to 999X
Fmin possible range
0 to Fmax
Instrument zeroes all spectral lines below Fmin.
Resolution
400, 800, 1600, 3200, 6400
lines. 3200 lines max. for dual channel measurements
Frequency scale
Hz, CPM, Orders, Linear scale with zooming
Amplitude scale
Acceleration, velocity, displacement or current Linear or log scales, auto or manual scaling.
Window shapes Hanning Rectangular
Overlap
(0, 12.5, 25, 37.5, 50, 62.5, 75, 87.5) %
Depends on Fmax and number of lines
Number of averages
1, 2, 4, 8, 16, 32, 64, 128
Increases sampling time proportionally
Averaging types
Linear, exponential, peak hold, synchronous
Demodulation bandwidths
23 bandwidth options
From 125 Hz to 1250 Hz Up to 16 kHz to 20 kHz
6Pack
Up to 40 kHz & 3200 lines (1 channel)
Up to 20 kHz & 1600 lines (2 channels)
Spectrum and waveform for low-frequency,high-frequency demodulation
Order tracking
Up to 6 kHz Fmax, orders based Tachometer required Mounted on high-speed shaft
Order tracking - Distortion
Less than -65 dB
Within 50% to 200% speed variation during recording
Display and Communication
Display
Graphic Grayscale LCD , White LED Backlight
Resolution & size
480 x 320 (HVGA), 5.5” (140 mm) Readable in direct sunlight
Supported Languages
English, French, Spanish, Portuguese, Russian, Chinese
Communication with PC
US and Ethernet (optional USB dongle), Use PROFLASH to upgrade instrument firmware
USB host port
USB 2.0, supplying 5V, 250mA, Save folders to USB flash drive
Battery and Charger
Battery type
Custom Lithium Ion pack, 7.4 V, 5000 mAh
Operating time
10 hours Backlight on — 60 second timeout
Charger type
Internal charging, automatic control, External power pack 12 V DC, 3 A output
Charge rate
3 A nominal
3 hours for complete charge
Environmental Limits
Operating temperature
14 °F to 122 °F (-10 to 50 °C)
Storage temperature & humidity
-4 °F to 140 °F (-20 to 60 °C), 95% RH, Up to 95 F (35 C), 85% RH if
storage exceeds one month
Ruggedness
4’ (1.2 m) drop onto concrete,IP65
Procedure: 26 drops following
MIL-STD-810F-516.5-IV
Also you can check product : NEW Bently Nevada Scout100-Ex Vibration Data Collector, Analyzer and Balancer
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer is a portable hardware monitoring device that supports dual-channel vibration data collection, analysis, and balancing. Use the device to collect data from sensors on a route, for machine-side analysis and diagnosis, and on-site dynamic balance correction. The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
USED Bently Nevada Commtest VB7 2 Channel Vibration Analyzer (Commtest VB7 2)
The Commtest VB7 Dual Channel Vibration Analyzer offers the power and convenience of dual-channel measurement and dual-plane balancing. Its balancing functions enable quick diagnosis and correction of dynamic unbalance, the most common form of unbalance. The VB7 Vibration Analyzer's combination of accuracy, intuitive operation, ease of use, and outstanding storage capacity ensures the instrument delivers a premium return on investment. The Commtest VB7 includes the powerful, award-winning Ascent software.
SPECS :
Sensor input
2 channels
Compatible sensor types
Accelerometer, velocity, displacement, current
AC coupled range
16 V peak-peak
Allows for ± 8 V sensor output swing (± 80 g)
DC coupled ranges
0 V to 20 V, -10 V to 10 V, -20 V to 0 V
Analog to digital conversion
24-bit ADC
Sensor excitation current
0 mA or 2.2 mA (configurable), 24 V maximum
Laser sensor range
10 cm to 2 m nominal
Power supply to sensor
5 V, 50 mA
TTL pulse rating
3.5 V (4 mA) min, 28 V (5 mA) max, off-state 0.8 V
Speed range
10 to 300 000 RPM (0.2 to 5 kHz)
Output to drive strobe
Up to 140 Hz (8400 CPM)
Demodulation bandwidths
23 bandwidth options
From 125 Hz to 1250 Hz up to 16 kHz to 20 kHz
Long time waveform Fmax
25 Hz to 40 kHz
Dimensions (W x L x H)
9.9” x 5.8” x 2.4” (252 x 148 x 60) mm
Weight
2.7 lb. (1.2 kg)
Operating temperature
14°F to 122°F (-10°C to 50°C)
Includes :
COMM-CBCC0027 | BNC adapter cable
COMM-CBVB0032 | Carry Case
GENE-12V-3.0A | Power supply
GENE-PC-10A/125V | Power Cord
GENE-CAR-ADAPT01 | Car Charger for cigarette lighter
GENE-USB | USB Cable, Type A to Type B, 6'
COMM-NSSK0275 | Neck Strap with Sensor Keeper
COMM-BATT0206 | Battery Pack (installed)
COMM-VB7-COIL-CBL01 | Accelometer Coiled Cable
COMM-MVBX0250 | vbSeries Instrument Reference Guide
COMM-VB7-QSG01 | Quick Start Guide
COMM-VB*-CD01 | Implementation Success Training CD
WILC-780A-IS-NR | Accelerometer 5% tolerance and a broad 3dB frequency response from 0.4 Hz to 14 kHz
COMM-VB7-MBS01 | Magnetic Base with Adjustable Stand
COMM-L766 | Tachometer Extension Cable, 5 meter
COMM-CB5R0025 | BNC Extension Cable, 5 meter (red)
COMM-VB-CASE02 | Accessory Bag
COMM-LASA0315 | Laser tachometer
COMM-CB5G0024 | BNC Extension Cable, 5 meter (green)
DELL-LATITUDE-D620 | 2GB RAM, RS232 Interface, Windows XP Pro Laptop Computer
DELL-AA22850 | 65W AC/DC Adapter 19.5V 3.34A Output w/F2951 Power Cord
COMM-VB-R-TAPE01 | Reflective Tape
COMM-VB*-CD02 | Ascent Reference Guide CD
COMM-MAGM0064 | Accelometer Magnetic Base, Male
Also you can check product : USED Bently Nevada Commtest VB8 Vibration Analysis System
SPECS :
Sensor input
2 channels
Compatible sensor types
Accelerometer, velocity, displacement, current
AC coupled range
16 V peak-peak
Allows for ± 8 V sensor output swing (± 80 g)
DC coupled ranges
0 V to 20 V, -10 V to 10 V, -20 V to 0 V
Analog to digital conversion
24-bit ADC
Sensor excitation current
0 mA or 2.2 mA (configurable), 24 V maximum
Laser sensor range
10 cm to 2 m nominal
Power supply to sensor
5 V, 50 mA
TTL pulse rating
3.5 V (4 mA) min, 28 V (5 mA) max, off-state 0.8 V
Speed range
10 to 300 000 RPM (0.2 to 5 kHz)
Output to drive strobe
Up to 140 Hz (8400 CPM)
Demodulation bandwidths
23 bandwidth options
From 125 Hz to 1250 Hz up to 16 kHz to 20 kHz
Long time waveform Fmax
25 Hz to 40 kHz
Dimensions (W x L x H)
9.9” x 5.8” x 2.4” (252 x 148 x 60) mm
Weight
2.7 lb. (1.2 kg)
Operating temperature
14°F to 122°F (-10°C to 50°C)
Includes :
COMM-CBCC0027 | BNC adapter cable
COMM-CBVB0032 | Carry Case
GENE-12V-3.0A | Power supply
GENE-PC-10A/125V | Power Cord
GENE-CAR-ADAPT01 | Car Charger for cigarette lighter
GENE-USB | USB Cable, Type A to Type B, 6'
COMM-NSSK0275 | Neck Strap with Sensor Keeper
COMM-BATT0206 | Battery Pack (installed)
COMM-VB7-COIL-CBL01 | Accelometer Coiled Cable
COMM-MVBX0250 | vbSeries Instrument Reference Guide
COMM-VB7-QSG01 | Quick Start Guide
COMM-VB*-CD01 | Implementation Success Training CD
WILC-780A-IS-NR | Accelerometer 5% tolerance and a broad 3dB frequency response from 0.4 Hz to 14 kHz
COMM-VB7-MBS01 | Magnetic Base with Adjustable Stand
COMM-L766 | Tachometer Extension Cable, 5 meter
COMM-CB5R0025 | BNC Extension Cable, 5 meter (red)
COMM-VB-CASE02 | Accessory Bag
COMM-LASA0315 | Laser tachometer
COMM-CB5G0024 | BNC Extension Cable, 5 meter (green)
DELL-LATITUDE-D620 | 2GB RAM, RS232 Interface, Windows XP Pro Laptop Computer
DELL-AA22850 | 65W AC/DC Adapter 19.5V 3.34A Output w/F2951 Power Cord
COMM-VB-R-TAPE01 | Reflective Tape
COMM-VB*-CD02 | Ascent Reference Guide CD
COMM-MAGM0064 | Accelometer Magnetic Base, Male
Also you can check product : USED Bently Nevada Commtest VB8 Vibration Analysis System
The Commtest vb7 and Scout100-Ex Two-Channel Vibration Analyzers are suitable for every level of vibration analyst - From novice to expert . These instruments offer the power and convenience of dual-channel measurement and dual-plane balancing. Their balancing functions enable quick diagnosis and correction of dynamic unbalance. The SCOUT100-Ex and vb7 instruments combine accuracy, intuitive operation, ease of use, and outstanding storage capacity to ensure a premium return on investment. The SCOUT100-Ex is certified for an ATEX Zone 2 hazardous rating, whereas the vb7 is rated for CSA Class 1, Division 2.
NEW Bently Nevada Scout100-Ex Vibration Data Collector, Analyzer and Balancer (Scout100-Ex)
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer is a portable hardware monitoring device that supports dual-channel vibration data collection, analysis, and balancing. Use the device to collect data from sensors on a route, for machine-side analysis and diagnosis, and on-site dynamic balance correction.
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The device includes a complete suite of advanced recording and analysis capabilities, including 6Pack recordings, coastdown and long time waveform.
The SCOUT100EX offers plenty of storage and long battery life. The device comes with a five year warranty. It works with System 1 software.
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer offers the following features:
- Up to two-channel, simultaneous on-route recordings
- Unique 6Pack recording system
- DC-coupled sensor support
- One GB memory plus virtually unlimited spectra and waveform storage
- Ten hours of battery life
- 6,400 lines FFT resolution
- 40 kHz Fmax
- Wide measurement range — 1,000 g, 25,000mm/s, 2,500mm
- Two-plane balancing
- Laser speed sensor for automatic capture of machine running speed
- Keyphasor tach mode
- Dynamic range ≥ 95 dB
- USB host port for data transfer to external USB memory
- Excellent ergonomics for walk-around data collection
- High contrast, backlit and direct-sunlight readable LCD
- True left and right-handed operation
- Sensor cable self-test feature
- Lightweight, rugged IP65 rated case
- Five-year warranty on the instrument hardware
- ATEX and IECEx Zone 2 hazardous location certification
- Field-upgradable Proflash system and free firmware updates for five years
Specifications
Sensors
Sensor input
Two Channels Simultaneous sampling
Compatible sensor types
Accelerometer, velocity,displacement, current
AC coupled range
16 V peak-peak
Allows for ± 8 V sensor output
swing (± 80 g)
DC coupled ranges
0 to 20 V
-10 to 10 V
-20 to 0 V
E.g. for reading prox-probe gap
Connectors
Safety feature: Break-free inline connector
Analog to digital conversion
24-bit ADC
Sensor excitation current
0 mA or 2.2 mA (configurable),
24 V maximum
2.2 mA required power for
IEPE/ICP-type accelerometer
Sensor detection
Warns if short circuit or not connected
Waveform Display
Number of samples
1024, 2048, 4096, 8192, 16,384
Time scale
10 ms to 256 seconds or orders based from 1 to 999 revs
Time synchronous averages
1, 2, 4, 8, 16, 32, 64, 128
Only available when tachometer is triggered
Long time waveform
25 Hz to 40 kHz
Fmax
20 kHz dual channel
Long time waveform duration
14.7 million samples (total over channels)
E.g. for Fmax 1 kHz
Fsample = 2.56 kHz and
Duration = 1.6 hrs
Tachometer
Sensor
Laser sensor with reflective tape Sensor triggers on beam reflection
Laser sensor range
10 cm to 2 m nominal
Range depends on size of reflective tape
Other sensor types supported
Contact, TTL Pulse, Keyphasor
Instrument has optically isolated input
Power supply to sensor
5 V, 50 mA
TTL pulse rating
3.5 V (4 mA) min
28 V (5 mA) max Off-state 0.8 V
Keyphasor threshold
7.7 ± 0.5 V , 13.2 ± 0.8 V , 18.5 ± 1 V , Nominally 8 V, 13 V, 18 V
Speed range
10 RPM to 300,000 RPM (0.2 Hz to 5 kHz)
Pulse width at least 0.1 ms
Accuracy
± 0.1 %
Output to drive strobe
Up to 140 Hz (8400 CPM) Typical Depends on strobe type Special cable required
Logging and Analysis
Output formats
LCD screen, Ascent, XML, System 1
Data storage
Dual 1 GB non-volatile flash memories, Database mirror copy on second flash memory
Data storage structure
Folders/machines/points/locations/routes
No limits are applied 50 character names
Max folder size
10,000 measurement locations
Parameter Indication
Maximum levels (peak)
> 1000 g (10,000 m/s2)
> 1000 in/sec (25,000 mm/s)
> 20 in (500 mm)
> 10,000 Amps
Effective limit is sensor sensitivity
and output voltage
Dynamic signal range
> 95 dB typical at 400 line resolution
Harmonic distortion
Less than -70 dB typical Other distortions and noise are lower
Units
g or m/s2 or adB, in/s or mm/s or vdB, mil or mm or µm amps
0-peak, peak-peak or RMS, Auto-scale by 1000x when required US and SI options for adB and vdB
Magnitude & cursors
Overall RMS value Waveform True pk-pk , Dual cursors Harmonics, Digital readouts on chart
Base accuracy
± 1% of readings
approximately 0.1 dB
For DC level — % of full scale
For AC signal — % of reading
High frequency attenuation
≤ 0.1 dB >100 Hz to 10 kHz
≤ 3 dB >10 kHz to 40 kHz
Attenuation tolerances are in addition to base accuracy.
AC coupling attenuation
≤ 0.1 dB 10 Hz to <100 Hz
≤ 3 dB 1 Hz to <10 Hz
Attenuation due to Integration
≤ 0.1 dB 1 Hz to <100 Hz
≤ 1.5 dB 0.2 Hz to <1 Hz
≤ 0.1 dB 10 Hz to <100 Hz
≤ 1.5 dB 1 Hz to <10 Hz
Low frequency mode:
When Coupling = DC and Fmax
≤ 100 Hz
Normal mode is applicable in all other cases. Values apply to single integration.
(Acceleration to velocity) Double the values for double integration (Acceleration to displacement)
Balancing
Planes
Up to 2 planes, 2 sensors
Speed range
30 to 60,000 RPM
Measurement type
Acceleration, velocity, displacement
Weight modes
Angle 0° to 360°, fixed position,
circumference arc
E.g. weights on fan blades, linear distance around circumference
Remove trial weights
Yes/No Automatic recalculation
Manual data entry
Yes Allows re-entry of previous balance jobs
Storage
Against machines in data structure,No limits applied
Mechanical
Size 9.9" W x 5.8" L x 2.4" H (252 x 148 x 60 mm)
Weight 2.7 lb (1.2 kg)
Including battery and strap
Spectrum Display
Fmax ranges
25, 50, 100, 125, 150, 200, 300,400, 500, 600, 800, 1000, 1200,
1600, 2000, 2500, 3000, 4000, 5000, 6000, 8000, 10,000,15,000, 20,000, 30,000, 40,000 Hz
Or equivalent CPM values, Or orders-based from 1X to 999X
Fmin possible range
0 to Fmax
Instrument zeroes all spectral lines below Fmin.
Resolution
400, 800, 1600, 3200, 6400
lines. 3200 lines max. for dual channel measurements
Frequency scale
Hz, CPM, Orders, Linear scale with zooming
Amplitude scale
Acceleration, velocity, displacement or current
Linear or log scales, auto or manual scaling
Window shapes
Hanning Rectangular
Overlap
(0, 12.5, 25, 37.5, 50, 62.5, 75, 87.5) %
Depends on Fmax and number of lines
Number of averages
1, 2, 4, 8, 16, 32, 64, 128
Increases sampling time proportionally
Averaging types
Linear, exponential, peak hold, synchronous
Demodulation bandwidths
23 bandwidth options
From 125 Hz to 1250 Hz Up to 16 kHz to 20 kHz
6Pack
Up to 40 kHz & 3200 lines (1 channel)
Up to 20 kHz & 1600 lines (2 channels)
Spectrum and waveform for low-frequency,high-frequency demodulation
Order tracking
Up to 6 kHz Fmax, orders based Tachometer required Mounted on high-speed shaft
Order tracking - Distortion
Less than -65 dB
Within 50% to 200% speed variation during recording
Display and Communication
Display
Graphic Grayscale LCD , White LED Backlight
Resolution & size
480 x 320 (HVGA), 5.5” (140 mm) Readable in direct sunlight
Supported Languages
English, French, Spanish, Portuguese, Russian, Chinese
Communication with PC
US and Ethernet (optional USB dongle), Use PROFLASH to upgrade instrument firmware
USB host port
USB 2.0, supplying 5V, 250mA, Save folders to USB flash drive
Battery and Charger
Battery type
Custom Lithium Ion pack, 7.4 V, 5000 mAh
Operating time
10 hours Backlight on — 60 second timeout
Charger type
Internal charging, automatic control, External power pack 12 V DC, 3 A output
Charge rate
3 A nominal
3 hours for complete charge
Environmental Limits
Operating temperature
14 °F to 122 °F (-10 to 50 °C)
Storage temperature & humidity
-4 °F to 140 °F (-20 to 60 °C), 95% RH, Up to 95 F (35 C), 85% RH if
storage exceeds one month
Ruggedness
4’ (1.2 m) drop onto concrete,IP65
Procedure: 26 drops following
MIL-STD-810F-516.5-IV
Also you can check product : USED Bently Nevada Scout100-Ex Vibration Data Collector, Analyzer and Balancer
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
The device includes a complete suite of advanced recording and analysis capabilities, including 6Pack recordings, coastdown and long time waveform.
The SCOUT100EX offers plenty of storage and long battery life. The device comes with a five year warranty. It works with System 1 software.
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer offers the following features:
- Up to two-channel, simultaneous on-route recordings
- Unique 6Pack recording system
- DC-coupled sensor support
- One GB memory plus virtually unlimited spectra and waveform storage
- Ten hours of battery life
- 6,400 lines FFT resolution
- 40 kHz Fmax
- Wide measurement range — 1,000 g, 25,000mm/s, 2,500mm
- Two-plane balancing
- Laser speed sensor for automatic capture of machine running speed
- Keyphasor tach mode
- Dynamic range ≥ 95 dB
- USB host port for data transfer to external USB memory
- Excellent ergonomics for walk-around data collection
- High contrast, backlit and direct-sunlight readable LCD
- True left and right-handed operation
- Sensor cable self-test feature
- Lightweight, rugged IP65 rated case
- Five-year warranty on the instrument hardware
- ATEX and IECEx Zone 2 hazardous location certification
- Field-upgradable Proflash system and free firmware updates for five years
Specifications
Sensors
Sensor input
Two Channels Simultaneous sampling
Compatible sensor types
Accelerometer, velocity,displacement, current
AC coupled range
16 V peak-peak
Allows for ± 8 V sensor output
swing (± 80 g)
DC coupled ranges
0 to 20 V
-10 to 10 V
-20 to 0 V
E.g. for reading prox-probe gap
Connectors
Safety feature: Break-free inline connector
Analog to digital conversion
24-bit ADC
Sensor excitation current
0 mA or 2.2 mA (configurable),
24 V maximum
2.2 mA required power for
IEPE/ICP-type accelerometer
Sensor detection
Warns if short circuit or not connected
Waveform Display
Number of samples
1024, 2048, 4096, 8192, 16,384
Time scale
10 ms to 256 seconds or orders based from 1 to 999 revs
Time synchronous averages
1, 2, 4, 8, 16, 32, 64, 128
Only available when tachometer is triggered
Long time waveform
25 Hz to 40 kHz
Fmax
20 kHz dual channel
Long time waveform duration
14.7 million samples (total over channels)
E.g. for Fmax 1 kHz
Fsample = 2.56 kHz and
Duration = 1.6 hrs
Tachometer
Sensor
Laser sensor with reflective tape Sensor triggers on beam reflection
Laser sensor range
10 cm to 2 m nominal
Range depends on size of reflective tape
Other sensor types supported
Contact, TTL Pulse, Keyphasor
Instrument has optically isolated input
Power supply to sensor
5 V, 50 mA
TTL pulse rating
3.5 V (4 mA) min
28 V (5 mA) max Off-state 0.8 V
Keyphasor threshold
7.7 ± 0.5 V , 13.2 ± 0.8 V , 18.5 ± 1 V , Nominally 8 V, 13 V, 18 V
Speed range
10 RPM to 300,000 RPM (0.2 Hz to 5 kHz)
Pulse width at least 0.1 ms
Accuracy
± 0.1 %
Output to drive strobe
Up to 140 Hz (8400 CPM) Typical Depends on strobe type Special cable required
Logging and Analysis
Output formats
LCD screen, Ascent, XML, System 1
Data storage
Dual 1 GB non-volatile flash memories, Database mirror copy on second flash memory
Data storage structure
Folders/machines/points/locations/routes
No limits are applied 50 character names
Max folder size
10,000 measurement locations
Parameter Indication
Maximum levels (peak)
> 1000 g (10,000 m/s2)
> 1000 in/sec (25,000 mm/s)
> 20 in (500 mm)
> 10,000 Amps
Effective limit is sensor sensitivity
and output voltage
Dynamic signal range
> 95 dB typical at 400 line resolution
Harmonic distortion
Less than -70 dB typical Other distortions and noise are lower
Units
g or m/s2 or adB, in/s or mm/s or vdB, mil or mm or µm amps
0-peak, peak-peak or RMS, Auto-scale by 1000x when required US and SI options for adB and vdB
Magnitude & cursors
Overall RMS value Waveform True pk-pk , Dual cursors Harmonics, Digital readouts on chart
Base accuracy
± 1% of readings
approximately 0.1 dB
For DC level — % of full scale
For AC signal — % of reading
High frequency attenuation
≤ 0.1 dB >100 Hz to 10 kHz
≤ 3 dB >10 kHz to 40 kHz
Attenuation tolerances are in addition to base accuracy.
AC coupling attenuation
≤ 0.1 dB 10 Hz to <100 Hz
≤ 3 dB 1 Hz to <10 Hz
Attenuation due to Integration
≤ 0.1 dB 1 Hz to <100 Hz
≤ 1.5 dB 0.2 Hz to <1 Hz
≤ 0.1 dB 10 Hz to <100 Hz
≤ 1.5 dB 1 Hz to <10 Hz
Low frequency mode:
When Coupling = DC and Fmax
≤ 100 Hz
Normal mode is applicable in all other cases. Values apply to single integration.
(Acceleration to velocity) Double the values for double integration (Acceleration to displacement)
Balancing
Planes
Up to 2 planes, 2 sensors
Speed range
30 to 60,000 RPM
Measurement type
Acceleration, velocity, displacement
Weight modes
Angle 0° to 360°, fixed position,
circumference arc
E.g. weights on fan blades, linear distance around circumference
Remove trial weights
Yes/No Automatic recalculation
Manual data entry
Yes Allows re-entry of previous balance jobs
Storage
Against machines in data structure,No limits applied
Mechanical
Size 9.9" W x 5.8" L x 2.4" H (252 x 148 x 60 mm)
Weight 2.7 lb (1.2 kg)
Including battery and strap
Spectrum Display
Fmax ranges
25, 50, 100, 125, 150, 200, 300,400, 500, 600, 800, 1000, 1200,
1600, 2000, 2500, 3000, 4000, 5000, 6000, 8000, 10,000,15,000, 20,000, 30,000, 40,000 Hz
Or equivalent CPM values, Or orders-based from 1X to 999X
Fmin possible range
0 to Fmax
Instrument zeroes all spectral lines below Fmin.
Resolution
400, 800, 1600, 3200, 6400
lines. 3200 lines max. for dual channel measurements
Frequency scale
Hz, CPM, Orders, Linear scale with zooming
Amplitude scale
Acceleration, velocity, displacement or current
Linear or log scales, auto or manual scaling
Window shapes
Hanning Rectangular
Overlap
(0, 12.5, 25, 37.5, 50, 62.5, 75, 87.5) %
Depends on Fmax and number of lines
Number of averages
1, 2, 4, 8, 16, 32, 64, 128
Increases sampling time proportionally
Averaging types
Linear, exponential, peak hold, synchronous
Demodulation bandwidths
23 bandwidth options
From 125 Hz to 1250 Hz Up to 16 kHz to 20 kHz
6Pack
Up to 40 kHz & 3200 lines (1 channel)
Up to 20 kHz & 1600 lines (2 channels)
Spectrum and waveform for low-frequency,high-frequency demodulation
Order tracking
Up to 6 kHz Fmax, orders based Tachometer required Mounted on high-speed shaft
Order tracking - Distortion
Less than -65 dB
Within 50% to 200% speed variation during recording
Display and Communication
Display
Graphic Grayscale LCD , White LED Backlight
Resolution & size
480 x 320 (HVGA), 5.5” (140 mm) Readable in direct sunlight
Supported Languages
English, French, Spanish, Portuguese, Russian, Chinese
Communication with PC
US and Ethernet (optional USB dongle), Use PROFLASH to upgrade instrument firmware
USB host port
USB 2.0, supplying 5V, 250mA, Save folders to USB flash drive
Battery and Charger
Battery type
Custom Lithium Ion pack, 7.4 V, 5000 mAh
Operating time
10 hours Backlight on — 60 second timeout
Charger type
Internal charging, automatic control, External power pack 12 V DC, 3 A output
Charge rate
3 A nominal
3 hours for complete charge
Environmental Limits
Operating temperature
14 °F to 122 °F (-10 to 50 °C)
Storage temperature & humidity
-4 °F to 140 °F (-20 to 60 °C), 95% RH, Up to 95 F (35 C), 85% RH if
storage exceeds one month
Ruggedness
4’ (1.2 m) drop onto concrete,IP65
Procedure: 26 drops following
MIL-STD-810F-516.5-IV
Also you can check product : USED Bently Nevada Scout100-Ex Vibration Data Collector, Analyzer and Balancer
The SCOUT100EX Vibration Data Collector, Analyzer and Balancer is a portable hardware monitoring device that supports dual-channel vibration data collection, analysis, and balancing. Use the device to collect data from sensors on a route, for machine-side analysis and diagnosis, and on-site dynamic balance correction.
The SCOUT100EX is ATEX Zone 2 and IECEx Zone 2 compliant and safe for hazardous areas. It is both light and rugged. The neck strap includes an integrated Sensor Keeper that restrains your sensor while you walk or climb to reach other machines.
NEW Pruftechnik VIBSCANNER 2 EX High-Speed Vibration Measurement Tool (VIBSCANNER 2 EX)
VIBSCANNER 2 EX
All-in-one vibration measurement tool featuring explosion protection standards
Safe, simple, precise
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues.
This is the ultimate tool for fast and accurate machine vibration measurements. The VibScanner 2 Ex heightens efficiency and data quality. In just a quarter of the time of a standard data-collector, it precisely measures available data in three axes. Equipped with a triaxial sensor, it requires only one measurement point and the click of a button to begin collecting machine data.
This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
FEATURES
Quick, accurate measurements
This system delivers measurements up to four times faster than the industry standard
Easy to use
Users get a highly intuitive user interface with a simple one-button-push to collect machine data.
Explosion protected
The VibScanner 2 Ex is certified for safe use in high-risk environments where a mixture with air or flammable substances – in the form of gas, dusts, fibers and flyings – is likely to occur during regular operation.
NEW: Remote Condition Monitoring Services
The VIBSCANNER 2EX remote condition monitoring service helps maximize the success of your condition monitoring program, giving direct access to our in-house experts with decades of experience
Get access to data analytics, insights on asset status, guided recommendations, detect faults early, improve your maintenance planning, reduce costs, increase the lifespan of your machinery, and avoid unplanned downtime.
Specifically designed for route-based maintenance jobs in hazardous areas
Fast and comprehensive data collection
No training is required, thanks to an intuitive graphical user interface
Minimal time spent at machine, due to parallel digital data processing
Real triaxial data acquisition
RPM Finder generates swift RPM determination based on signal
Touch display: shock-proof, high-contrast, glove-enabled
TECHNOLOGY
The "Triax-Effect"
The VibScanner 2 Ex will diminish worries about finding the right measurement points at the machine. Because it features a Prüftechnik triaxial sensor, just one measurement point is required instead of three separate ones. This saves considerable time without sacrificing data quality. The “Triax-Effect” enables users to obtain measurements up to four times faster than the industry standard while achieving new levels of data quality.
ones. VibScanner 2 Ex thus saves considerable time without sacrificing data quality. The “Triax-Effect” enables obtaining measurements up to four times faster than the industry standard while achieving new levels of data quality.
Specifications
Measurement Channels
Number
3 synchronous analog channels (X/Y/Z)
Z channel (0 ... 50 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE Current Linedrive
X/Y channel (0 ... 10 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE
Dynamic range
109.5 dB (total)
Sampling rate
up to 131 kHz per channel
Signal processing
3 x 24 bit ADCs
Measuring range / Accuracy
Vibration acceleration: dependent on used sensor
Shock pulse: -10 dBsv to 80 dBsv /- 2 dBsv
Fulfilled standard
DIN ISO 2954:2012 (2-1 kHz, 10 Hz -1 kHz, 10-10 KHz)
Display
Type
Capacitive touchscreen
Optically bonded for high contrast and increased shock resistance
Active area
95 x 54 mm (3 3/4” x 2 1/8”)
Size
10.9 cm (4 1/3“)
Color depth
16 million colors
Viewing angle
< 140°
Operation
Multi touch – gesture control Glove-compatible
Illumination
Background lighting, adjustable
Ambient light sensor
Yes
Supply
Type
Li ion rechargeable battery
Nominal voltage
7.3V
Energy density
50 Wh
Charge time,typical
3.5 h (0 ... 100 % @ 25 °C / 77 °F)
2.5 h (0 ... 80 % @ 25 °C / 77 °F)
Charging temperature
10 °C ... 40 °C
[ 50 °F ... 104 °F]
Operating time, typical
10 h (cont. operation, rech. battery 100 %)
5 h (cont. operation, rech. battery 50 %)
Power adapter
100-240 V~, 50-60 Hz (input) 12 V 3 A (output)
Energy saving mode
Yes
Computer
Processor
ARM A9 - Quadcore 1 GHz
Operating elements
Touchscreen, ON/OFF key, Enter key
Memory
microSD card, 32 GB for measurement data, permanently
installed 2 GB RAM
USB
1 x USB 2.0, device interface
RFID
RFID reader module for PRÜFTECHNIK transponder:
ALI 50.628 EX0-25
Complies with ISO 14443a and ISO 15693
Reading distance: 2...3 cm (13/16” ... 1 3/16”)
WiFi
IEEE 802.11a/b/g/n/ac
Throughput: < 200 Mbps
Security: WPA2
Stroboscope
Frequency range: 0.1 – 1000 Hz
Resolution: 0.06 1/min.
LEDs: Risk group 1 per IEC 62471
LED
1x RGB LED (display for battery status and charging
process)
Environment/ mechanical system
Connections
Socket for power adapter Micro USB for data cable
Plug-in connector (8-pole) for signal cable
Housing, EX device
Housing: PC
Sheath: TPE, black, antistatic, conductive
Dimensions
203 x 143 x 76mm (LxWxH) (8 x 5 5/8 x 3”)
Weight
approx. 1.0 kg (35.3 oz)
Degree of protection
IP55
Temperature range
Operation: 0°C ... 50°C [ 32 °F ...122 °F ]
Storage: -20 °C ... 60 °C [-4 °F ... 140 °F ]
Air humidity
0 ... 90 %, non-condensing
Certifications CE, RoHS, FCC, FCC/IC, ATEX, IECEx,
NEC 500/505, CEC Annex J18, CEC sect. 18
Operation in the Ex-zone
General specifications
Ex-Data CSA – only for U.S. and Canada
CSA certificate
number:
CSA20CA80035102X
Install per control drawing:
LIT 52.300.EN
Marking of the device:
Ex ec [ic] IIC T4 Gc
Ex tc [ic] IIIB T135°C Dc
Class I, Zone 2, AEx ec [ic] IIC T4 Gc
Zone 22, AEx tc [ic] IIIB T135°C Dc
Class I, Div. 2, Groups A, B, C, D T4
Class II, Div. 2, Groups F, G, T4, Class III, Div.2
Associated equipment for Class I, Division 2,
Groups A, B, C, D
Associated equipment for Class II, Division 2,
Groups F, G
Associated equipment for Class III, Division 2
Ex-Data ATEX, IECEx
ATEX certificate number:
EPS 19 ATEX 1 119 X
IECEx certificate number:
IECEx EPS 19.0057X
Marking of the device:
II 3G Ex ec [ic] IIC T4 Gc
II 3D Ex tc [ic] IIIB T135°C Dc
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - VIbration Analysis and Balancing
All-in-one vibration measurement tool featuring explosion protection standards
Safe, simple, precise
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues.
This is the ultimate tool for fast and accurate machine vibration measurements. The VibScanner 2 Ex heightens efficiency and data quality. In just a quarter of the time of a standard data-collector, it precisely measures available data in three axes. Equipped with a triaxial sensor, it requires only one measurement point and the click of a button to begin collecting machine data.
This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
FEATURES
Quick, accurate measurements
This system delivers measurements up to four times faster than the industry standard
Easy to use
Users get a highly intuitive user interface with a simple one-button-push to collect machine data.
Explosion protected
The VibScanner 2 Ex is certified for safe use in high-risk environments where a mixture with air or flammable substances – in the form of gas, dusts, fibers and flyings – is likely to occur during regular operation.
NEW: Remote Condition Monitoring Services
The VIBSCANNER 2EX remote condition monitoring service helps maximize the success of your condition monitoring program, giving direct access to our in-house experts with decades of experience
Get access to data analytics, insights on asset status, guided recommendations, detect faults early, improve your maintenance planning, reduce costs, increase the lifespan of your machinery, and avoid unplanned downtime.
Specifically designed for route-based maintenance jobs in hazardous areas
Fast and comprehensive data collection
No training is required, thanks to an intuitive graphical user interface
Minimal time spent at machine, due to parallel digital data processing
Real triaxial data acquisition
RPM Finder generates swift RPM determination based on signal
Touch display: shock-proof, high-contrast, glove-enabled
TECHNOLOGY
The "Triax-Effect"
The VibScanner 2 Ex will diminish worries about finding the right measurement points at the machine. Because it features a Prüftechnik triaxial sensor, just one measurement point is required instead of three separate ones. This saves considerable time without sacrificing data quality. The “Triax-Effect” enables users to obtain measurements up to four times faster than the industry standard while achieving new levels of data quality.
ones. VibScanner 2 Ex thus saves considerable time without sacrificing data quality. The “Triax-Effect” enables obtaining measurements up to four times faster than the industry standard while achieving new levels of data quality.
Specifications
Measurement Channels
Number
3 synchronous analog channels (X/Y/Z)
Z channel (0 ... 50 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE Current Linedrive
X/Y channel (0 ... 10 kHz)
-20 .. 20 V, input impedance: 78 kOhm IEPE
Dynamic range
109.5 dB (total)
Sampling rate
up to 131 kHz per channel
Signal processing
3 x 24 bit ADCs
Measuring range / Accuracy
Vibration acceleration: dependent on used sensor
Shock pulse: -10 dBsv to 80 dBsv /- 2 dBsv
Fulfilled standard
DIN ISO 2954:2012 (2-1 kHz, 10 Hz -1 kHz, 10-10 KHz)
Display
Type
Capacitive touchscreen
Optically bonded for high contrast and increased shock resistance
Active area
95 x 54 mm (3 3/4” x 2 1/8”)
Size
10.9 cm (4 1/3“)
Color depth
16 million colors
Viewing angle
< 140°
Operation
Multi touch – gesture control Glove-compatible
Illumination
Background lighting, adjustable
Ambient light sensor
Yes
Supply
Type
Li ion rechargeable battery
Nominal voltage
7.3V
Energy density
50 Wh
Charge time,typical
3.5 h (0 ... 100 % @ 25 °C / 77 °F)
2.5 h (0 ... 80 % @ 25 °C / 77 °F)
Charging temperature
10 °C ... 40 °C
[ 50 °F ... 104 °F]
Operating time, typical
10 h (cont. operation, rech. battery 100 %)
5 h (cont. operation, rech. battery 50 %)
Power adapter
100-240 V~, 50-60 Hz (input) 12 V 3 A (output)
Energy saving mode
Yes
Computer
Processor
ARM A9 - Quadcore 1 GHz
Operating elements
Touchscreen, ON/OFF key, Enter key
Memory
microSD card, 32 GB for measurement data, permanently
installed 2 GB RAM
USB
1 x USB 2.0, device interface
RFID
RFID reader module for PRÜFTECHNIK transponder:
ALI 50.628 EX0-25
Complies with ISO 14443a and ISO 15693
Reading distance: 2...3 cm (13/16” ... 1 3/16”)
WiFi
IEEE 802.11a/b/g/n/ac
Throughput: < 200 Mbps
Security: WPA2
Stroboscope
Frequency range: 0.1 – 1000 Hz
Resolution: 0.06 1/min.
LEDs: Risk group 1 per IEC 62471
LED
1x RGB LED (display for battery status and charging
process)
Environment/ mechanical system
Connections
Socket for power adapter Micro USB for data cable
Plug-in connector (8-pole) for signal cable
Housing, EX device
Housing: PC
Sheath: TPE, black, antistatic, conductive
Dimensions
203 x 143 x 76mm (LxWxH) (8 x 5 5/8 x 3”)
Weight
approx. 1.0 kg (35.3 oz)
Degree of protection
IP55
Temperature range
Operation: 0°C ... 50°C [ 32 °F ...122 °F ]
Storage: -20 °C ... 60 °C [-4 °F ... 140 °F ]
Air humidity
0 ... 90 %, non-condensing
Certifications CE, RoHS, FCC, FCC/IC, ATEX, IECEx,
NEC 500/505, CEC Annex J18, CEC sect. 18
Operation in the Ex-zone
General specifications
Ex-Data CSA – only for U.S. and Canada
CSA certificate
number:
CSA20CA80035102X
Install per control drawing:
LIT 52.300.EN
Marking of the device:
Ex ec [ic] IIC T4 Gc
Ex tc [ic] IIIB T135°C Dc
Class I, Zone 2, AEx ec [ic] IIC T4 Gc
Zone 22, AEx tc [ic] IIIB T135°C Dc
Class I, Div. 2, Groups A, B, C, D T4
Class II, Div. 2, Groups F, G, T4, Class III, Div.2
Associated equipment for Class I, Division 2,
Groups A, B, C, D
Associated equipment for Class II, Division 2,
Groups F, G
Associated equipment for Class III, Division 2
Ex-Data ATEX, IECEx
ATEX certificate number:
EPS 19 ATEX 1 119 X
IECEx certificate number:
IECEx EPS 19.0057X
Marking of the device:
II 3G Ex ec [ic] IIC T4 Gc
II 3D Ex tc [ic] IIIB T135°C Dc
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - VIbration Analysis and Balancing
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues. This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
USED Pruftechnik Vibxpert II Vibration Analyzer and Dynamic Balancer (Vibxpert II)
VIBXPERT II offers all these powerful analysis tools in one user friendly system. VIBXPERT II has a modular structure that allows you to upgrade the device at any time from a basic package for fast route-based data collection to a full-blown 2 channel analyzer with advanced analysis functionalities.
Besides the high-end analysis measurements capabilities, field balancing options and route data collection functionalities, VIBXPERT II also offers a special machine template mode which is typically used to perform acceptance measurements of newly produced or installed rotating equipment such as fans, pumps, electric motors or generators. The machine templates includes all relevant machine information such as RPM, roller bearing defect frequencies, warning and alarm thresholds, which allow you to provide a standardized, fast and easy acceptance inspection.
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine. The robust design enables both fast and complex interventions. Whether in clinically clean systems, or harsh industrial environments. VIBXPERT II sets the standard in mobile machine and plant condition monitoring.
In addition to reliable, fast, and highly effective data analysis, the VIBXPERT II can also be used for operational balancing. This makes the VIBXPERT II the most powerful and effective device in mobile condition monitoring. VIBXPERT II is compatible with PRUFTECHNIK's own OMNITREND Center analysis software, enabling highly efficient and precise analysis results. Center analysis software, enabling highly efficient and precise analysis results.
Specs:
Input
Analog, Vibration, 2x : Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range : DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range : 96 dB (measurement) / 136 dB (total)
Sampling frequency : up to 131 kHz per channel
Impedance : 90 kOhm, with cable VIB 5.433
Analog, Temperature, 1x : Thermocouple (type K)
Digital, Pulse/ Tacho, 1x : RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage : ± 26 V
Switching threshold for 0 V ... 26 V signal : max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal : min. -8 V rising, max. -10 V falling
Pulse width : < 0.1 ms
Output
Stroboscope control : TTL
Frequency range : 0 - 500 Hz
Resolution : 0.05 Hz
Signal-Out : Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range : 0.5 Hz - 40 kHz
Output impedance : 100 Ohm
Measurement range / Accuracy
Vibration acceleration : depends on the sensor connected
Shock pulse : -10 ...80 dBsv / ± 3dBsv
RPM : 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K : -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled : Frequency response acc to ISO 2954
Display
Type : TFT-LCD, backlit
Pixel area : 116 x 87 mm
Resolution : VGA (640 x 480 pixel) with 140 ppi
Color depth : 18 bit (262144 colors)
Power supply
Battery type : Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time : < 5 hours in the instrument
Charger, input : 110-240 V / 50-60 Hz
Charging temperature : 0°C ... 50°C [ 32 °F ... 122°F]
Computer
Processor : Marvell PXA320 806 MHz
Keyboard : 1 navigation pad and 7 keys (Zoom, Escape, Function, Help, Menu, On/Off); Keyboard illumination controlled by ambient light.
Memory : Internal: 128 MB DDR RAM; Compact Flash: 2 GB to 8 GB (interchangeable)
Serial interface : RS 232, <115 kBaud USB interface USB 2.0
Ethernet interface : 100 Mbit (100Base T), 10 Mbit (10Base T)
Environment / General
Connectors : Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing : ABS plastics
Dimensions : 186 x 162 x 52 mm (LxWxH), [ 7 5/16" x 6 3/8" x 2 1/16" ]
Weight : approx. 1.1 kg [39 oz]
Environmental protection : IP65, dust and splash-proofed
Temperature range : -10°C ... 60°C (Operation), [ 14 °F ... 140°F], -20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Included:
1 x PRUFTECHNIK VIBXPERT II device as new
NEW VIB 6.142R sensor magnetic adapter
NEW charger with adapters for all countries
NEW USB cable to connect to a pc
NEW VIB 5.436 spiral lead to connect to sensor
NEW 2GB sd memory card
Certifications, calibrated until 2022
Omnitrend software
protective carrying bag shoulder strap
Hard 2 wheels case with extendable handle
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - VIbration Analysis and Balancing
Besides the high-end analysis measurements capabilities, field balancing options and route data collection functionalities, VIBXPERT II also offers a special machine template mode which is typically used to perform acceptance measurements of newly produced or installed rotating equipment such as fans, pumps, electric motors or generators. The machine templates includes all relevant machine information such as RPM, roller bearing defect frequencies, warning and alarm thresholds, which allow you to provide a standardized, fast and easy acceptance inspection.
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine. The robust design enables both fast and complex interventions. Whether in clinically clean systems, or harsh industrial environments. VIBXPERT II sets the standard in mobile machine and plant condition monitoring.
In addition to reliable, fast, and highly effective data analysis, the VIBXPERT II can also be used for operational balancing. This makes the VIBXPERT II the most powerful and effective device in mobile condition monitoring. VIBXPERT II is compatible with PRUFTECHNIK's own OMNITREND Center analysis software, enabling highly efficient and precise analysis results. Center analysis software, enabling highly efficient and precise analysis results.
Specs:
Input
Analog, Vibration, 2x : Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range : DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range : 96 dB (measurement) / 136 dB (total)
Sampling frequency : up to 131 kHz per channel
Impedance : 90 kOhm, with cable VIB 5.433
Analog, Temperature, 1x : Thermocouple (type K)
Digital, Pulse/ Tacho, 1x : RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage : ± 26 V
Switching threshold for 0 V ... 26 V signal : max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal : min. -8 V rising, max. -10 V falling
Pulse width : < 0.1 ms
Output
Stroboscope control : TTL
Frequency range : 0 - 500 Hz
Resolution : 0.05 Hz
Signal-Out : Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range : 0.5 Hz - 40 kHz
Output impedance : 100 Ohm
Measurement range / Accuracy
Vibration acceleration : depends on the sensor connected
Shock pulse : -10 ...80 dBsv / ± 3dBsv
RPM : 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K : -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled : Frequency response acc to ISO 2954
Display
Type : TFT-LCD, backlit
Pixel area : 116 x 87 mm
Resolution : VGA (640 x 480 pixel) with 140 ppi
Color depth : 18 bit (262144 colors)
Power supply
Battery type : Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time : < 5 hours in the instrument
Charger, input : 110-240 V / 50-60 Hz
Charging temperature : 0°C ... 50°C [ 32 °F ... 122°F]
Computer
Processor : Marvell PXA320 806 MHz
Keyboard : 1 navigation pad and 7 keys (Zoom, Escape, Function, Help, Menu, On/Off); Keyboard illumination controlled by ambient light.
Memory : Internal: 128 MB DDR RAM; Compact Flash: 2 GB to 8 GB (interchangeable)
Serial interface : RS 232, <115 kBaud USB interface USB 2.0
Ethernet interface : 100 Mbit (100Base T), 10 Mbit (10Base T)
Environment / General
Connectors : Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing : ABS plastics
Dimensions : 186 x 162 x 52 mm (LxWxH), [ 7 5/16" x 6 3/8" x 2 1/16" ]
Weight : approx. 1.1 kg [39 oz]
Environmental protection : IP65, dust and splash-proofed
Temperature range : -10°C ... 60°C (Operation), [ 14 °F ... 140°F], -20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Included:
1 x PRUFTECHNIK VIBXPERT II device as new
NEW VIB 6.142R sensor magnetic adapter
NEW charger with adapters for all countries
NEW USB cable to connect to a pc
NEW VIB 5.436 spiral lead to connect to sensor
NEW 2GB sd memory card
Certifications, calibrated until 2022
Omnitrend software
protective carrying bag shoulder strap
Hard 2 wheels case with extendable handle
Also you can check product : NEW Pruftechnik Vibxpert 3 Balancer - VIbration Analysis and Balancing
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
USED Pruftechnik Vibxpert EX Vibration Analyzer and Data Collector (Vibxpert EX)
VIBXPERT EX records all types of machine vibrations, bearing conditions as well as process and visual inspection data, and transfers this
information to the OMNITREND maintenance software for evaluation, archiving and documentation.
The combination of its extensive range of features and easy operation
makes VIBXPERT EX the effective choice for a wide range of applications:
-High measurement accuracy and high-speed data collection
-Operating modes:
'Route' for routine data collection for condition-based maintenance,
'Multimode' for individual measurements for machine diagnosis
'Balancing' in one or two planes (optional).
'Machine templates' for recurrent measurement tasks within the
scope of acceptance or service measurements
-Almost every type of sensor can be connected
-One or two measurement channels (analog);
Upgrade to 2-channel device at any time via password.
-Intrinsic safety approved for zone 1
Hardware
-Two synchronous measurement channels for diagnosis of complex
measurements (e.g. shaft vibration).
-Unlimited storage capacity (Standard: 2 GB CompactFlash).
-Three alarm LEDs (red-yellow-green) indicate if thresholds have
been exceeded (based on ISO standards). A blue LED lights up if
everything is OK.
-Daylight sensor controls keyboard illumination
-Dustproof and splashproof (IP65) - ideal for use in demanding industrial environments
-Connector technology compatible to VIBSCANNER (same cable)
-Connector for NiCrNi thermocouples
-Connector for headphones
Data collection and data analysis
- Overall values
- Vibration acceleration, velocity, displacement
- Current & voltage (process parameters)
- Shock pulse (bearing condition)
- Temperature
- RPM
- Signals
- Frequency-based and order-based data collection
- Amplitude, envelope, order spectra
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range 96 dB (measurement) / 136 dB (total)
Sampling frequency up to 131 kHz per channel
Analog, Temperature, 1x Thermocouple (type K)
Digital, Pulse/ Tacho, 1x RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage ± 26 V
Switching threshold for 0 V ... 26 V signal max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal min. -8 V rising, max. -10 V falling
Pulse width < 0.1 ms
Output
Stroboscope control TTL output level
Frequency range 0 - 500 Hz
Resolution 0.05 Hz
Signal-Out Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range 0.5 Hz - 40 kHz
Output impedance 100 Ohm
Measurement range / Accuracy
Vibration acceleration depends on the sensor connected
Shock pulse -10 ...80 dBsv / ± 3dBsv
RPM 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled Frequency response acc to ISO 2954
Display
Type LCD, backlit
Pixel area 115 x 78 mm [ 4 1/2" x 3 1/16"]
Resolution 1/2 VGA (480 x 320 pixel)
Color depth 16 grey scales
Power supply
Battery type Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time < 5 hours in the instrument
Charger, input 110-240 V / 50-60 Hz
Charging temperature 0°C ... 50°C [ 32 °F ... 122 °F]
Computer
Processor Intel Strong ARM 206 MHz
Keyboard 2 joysticks and 12 keys for right-hand or left-hand operation. Keyboard illumination controlled by
ambient light.
Memory Internal: 64 MB RAM; Compact Flash: 1 GB or 4 GB
Serial interface RS 232, <115 kBaud
USB interface USB host for printing; USB slave for data exchange with OMNITREND
Ethernet interface 10 Mbit (10Base T), 10 Mbit (10Base T)
Environment / General
Connectors Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing Aluminium
Dimensions 250 x 220 x 37 mm [ 9 13/16" x 8 11/16" x 1 7/16" ] (LxWxH)
Weight approx. 2.3 kg [81 oz]
Environmental protection IP65, dust and splash-proofed
Temperature range -10°C ... 60°C (Operation), [ 14 °F ... 140°F]
-20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Intrinsic safety details
Marking
II 2G Ex ib IIC T4
Temperature range -10 °C ... 60 °C
Also you can check product : USED Pruftechnik Vibxpert II Vibration Analyzer and Dynamic Balancer
information to the OMNITREND maintenance software for evaluation, archiving and documentation.
The combination of its extensive range of features and easy operation
makes VIBXPERT EX the effective choice for a wide range of applications:
-High measurement accuracy and high-speed data collection
-Operating modes:
'Route' for routine data collection for condition-based maintenance,
'Multimode' for individual measurements for machine diagnosis
'Balancing' in one or two planes (optional).
'Machine templates' for recurrent measurement tasks within the
scope of acceptance or service measurements
-Almost every type of sensor can be connected
-One or two measurement channels (analog);
Upgrade to 2-channel device at any time via password.
-Intrinsic safety approved for zone 1
Hardware
-Two synchronous measurement channels for diagnosis of complex
measurements (e.g. shaft vibration).
-Unlimited storage capacity (Standard: 2 GB CompactFlash).
-Three alarm LEDs (red-yellow-green) indicate if thresholds have
been exceeded (based on ISO standards). A blue LED lights up if
everything is OK.
-Daylight sensor controls keyboard illumination
-Dustproof and splashproof (IP65) - ideal for use in demanding industrial environments
-Connector technology compatible to VIBSCANNER (same cable)
-Connector for NiCrNi thermocouples
-Connector for headphones
Data collection and data analysis
- Overall values
- Vibration acceleration, velocity, displacement
- Current & voltage (process parameters)
- Shock pulse (bearing condition)
- Temperature
- RPM
- Signals
- Frequency-based and order-based data collection
- Amplitude, envelope, order spectra
Input
Analog, Vibration, 2x
Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range 96 dB (measurement) / 136 dB (total)
Sampling frequency up to 131 kHz per channel
Analog, Temperature, 1x Thermocouple (type K)
Digital, Pulse/ Tacho, 1x RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage ± 26 V
Switching threshold for 0 V ... 26 V signal max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal min. -8 V rising, max. -10 V falling
Pulse width < 0.1 ms
Output
Stroboscope control TTL output level
Frequency range 0 - 500 Hz
Resolution 0.05 Hz
Signal-Out Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range 0.5 Hz - 40 kHz
Output impedance 100 Ohm
Measurement range / Accuracy
Vibration acceleration depends on the sensor connected
Shock pulse -10 ...80 dBsv / ± 3dBsv
RPM 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled Frequency response acc to ISO 2954
Display
Type LCD, backlit
Pixel area 115 x 78 mm [ 4 1/2" x 3 1/16"]
Resolution 1/2 VGA (480 x 320 pixel)
Color depth 16 grey scales
Power supply
Battery type Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time < 5 hours in the instrument
Charger, input 110-240 V / 50-60 Hz
Charging temperature 0°C ... 50°C [ 32 °F ... 122 °F]
Computer
Processor Intel Strong ARM 206 MHz
Keyboard 2 joysticks and 12 keys for right-hand or left-hand operation. Keyboard illumination controlled by
ambient light.
Memory Internal: 64 MB RAM; Compact Flash: 1 GB or 4 GB
Serial interface RS 232, <115 kBaud
USB interface USB host for printing; USB slave for data exchange with OMNITREND
Ethernet interface 10 Mbit (10Base T), 10 Mbit (10Base T)
Environment / General
Connectors Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing Aluminium
Dimensions 250 x 220 x 37 mm [ 9 13/16" x 8 11/16" x 1 7/16" ] (LxWxH)
Weight approx. 2.3 kg [81 oz]
Environmental protection IP65, dust and splash-proofed
Temperature range -10°C ... 60°C (Operation), [ 14 °F ... 140°F]
-20°C ... 60°C (Storage), [ -4 °F ... 140°F]
Intrinsic safety details
Marking
II 2G Ex ib IIC T4
Temperature range -10 °C ... 60 °C
Also you can check product : USED Pruftechnik Vibxpert II Vibration Analyzer and Dynamic Balancer
VIBXPERT EX records all types of machine vibrations, bearing conditions as well as process and visual inspection data, and transfers this information to the OMNITREND maintenance software for evaluation, archiving and documentation.
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.
NEW VMI VIBER X4 Portable Vibration Analyzer (VIBER X4)
The VIBER X4 is a state of the art route-based vibration analyzer developed for advanced condition maintenance with top class accuracy.
Some of the features that Viber X4 can proudly offer
-Predict equipment failures before they occur
-Troubleshoot equipments and discover the cause of problem
-Inspect equipment during maintenance to confirm a successful repair
-Ensure correct installation of equipments
-Easy to operate by logic functions, saves time to get started
-Flexible with many functions
-Ability to choose your own language
-Bright high-resolution display makes it easy to see perfect results even in bright conditions
-Record wave time signal, up to 5 minutes
-Quickly charge the battery up to 80% within two hours even in the car
-32 GB of memory that guarantees enough space for your data
-Rugged and tight (IP 65)
-Best price-performance ratio
VIBER X4 is designed to work together with SpectraPro, PC software for advanced vibration analysis
- Create routes and set alarm levels
- Simple database structure with templates and pictures
- Large bearing database (over 9000 pcs) where defect frequencies can be calculated and automatically analysed
- Quick view, store your own array of windows for fast viewing
- Waterfall, last 5 spectra or choose your own
- Automatic reports, generate probable fault causes and several reports with just a click of a button.
SPECS :
Digital
ADC
24 bit, 128 kSPS
Dynamic
range 120 dB
Memory 32 GB
Display
Size & Resolution
3.5 inch Amorphous TFT-LCD 320 x 480 pixels
Colors 65536
Signals in
AC inputs
All standard ICP accelerometers (4mA/24V), velocimeters or general purpose AC transducers
External reference 0.5 to 24 V
Temp.sensor
Temperature -20 to 140 °C Built-in infrared sensor
Measurements
Frequency range
Vibration: 0.5 to 12800 Hz
BC: 500 to 25000 Hz
Amplitude range 0 to 80 g, peak Depending on transducer
Accuracy
0.01 g ± 1 % for non integrated
0.1 mm/s ± 2 % for single integrated
2 µm ± 3 % for double integrated
FFT lines Up to 12800
Resolution Up to 0.125 Hz/line
Windowing Hanning, Hamming, Blackmann, Kaiser-Bessel
Power
Battery 3.7 V, 6.8 Ah Li-ion Fuel gauge smart battery pack
Operating time 12 hours typical use
Charging 2 hours up to 80% with fast charger 4 hours fully charged
Charger Fast charger QC 3.0 compatible
Temp.
Operating Storage
-20 °C to 70 °C (-4 °F to 158 °F)
-30 °C to 80 °C (-22 °F to 176 °F)
Size
Dimensions L x W x H
190 x 100 x 60 mm
Weight 400 gr
Also you can check product : NEW VMI VIBER X5 MK III Advanced Vibration Analyzer
Some of the features that Viber X4 can proudly offer
-Predict equipment failures before they occur
-Troubleshoot equipments and discover the cause of problem
-Inspect equipment during maintenance to confirm a successful repair
-Ensure correct installation of equipments
-Easy to operate by logic functions, saves time to get started
-Flexible with many functions
-Ability to choose your own language
-Bright high-resolution display makes it easy to see perfect results even in bright conditions
-Record wave time signal, up to 5 minutes
-Quickly charge the battery up to 80% within two hours even in the car
-32 GB of memory that guarantees enough space for your data
-Rugged and tight (IP 65)
-Best price-performance ratio
VIBER X4 is designed to work together with SpectraPro, PC software for advanced vibration analysis
- Create routes and set alarm levels
- Simple database structure with templates and pictures
- Large bearing database (over 9000 pcs) where defect frequencies can be calculated and automatically analysed
- Quick view, store your own array of windows for fast viewing
- Waterfall, last 5 spectra or choose your own
- Automatic reports, generate probable fault causes and several reports with just a click of a button.
SPECS :
Digital
ADC
24 bit, 128 kSPS
Dynamic
range 120 dB
Memory 32 GB
Display
Size & Resolution
3.5 inch Amorphous TFT-LCD 320 x 480 pixels
Colors 65536
Signals in
AC inputs
All standard ICP accelerometers (4mA/24V), velocimeters or general purpose AC transducers
External reference 0.5 to 24 V
Temp.sensor
Temperature -20 to 140 °C Built-in infrared sensor
Measurements
Frequency range
Vibration: 0.5 to 12800 Hz
BC: 500 to 25000 Hz
Amplitude range 0 to 80 g, peak Depending on transducer
Accuracy
0.01 g ± 1 % for non integrated
0.1 mm/s ± 2 % for single integrated
2 µm ± 3 % for double integrated
FFT lines Up to 12800
Resolution Up to 0.125 Hz/line
Windowing Hanning, Hamming, Blackmann, Kaiser-Bessel
Power
Battery 3.7 V, 6.8 Ah Li-ion Fuel gauge smart battery pack
Operating time 12 hours typical use
Charging 2 hours up to 80% with fast charger 4 hours fully charged
Charger Fast charger QC 3.0 compatible
Temp.
Operating Storage
-20 °C to 70 °C (-4 °F to 158 °F)
-30 °C to 80 °C (-22 °F to 176 °F)
Size
Dimensions L x W x H
190 x 100 x 60 mm
Weight 400 gr
Also you can check product : NEW VMI VIBER X5 MK III Advanced Vibration Analyzer
The VIBER X4 is a state of the art route-based vibration analyzer developed for advanced condition maintenance with top class accuracy.
VIBER X4 is designed to work together with SpectraPro, PC software for advanced vibration analysis.
Bright high-resolution display makes it easy to see perfect results even in bright conditions, and Inspect equipment during maintenance to confirm a successful repair.
NEW VMI VIBER X5 MK III Advanced Vibration Analyzer (VIBER X5 MK III)
VIBER X5 MK III is an advanced vibration analyzer, together with SpectraPro® PC software it provides a complete package for redictive condition maintenance.
VIBER X5 MK III is capable of measuring, processing, displaying and storing a wide range of measurement parameters. You can collect various types of field data; examples are vibration information,bearing analyze, temperature, speed and other process variables that enables you to expand its functionality by adding new measurements to improve your analysis capabilities. You may also use the VIBER X5 MK III for 1 or 2 plane balancing.
VIBER X5 MK III perfectly fits with the SpectraPro multipurpose software and it is also compatible with our other analyze instruments.
Features of VIBER X5 MK III:
Embedded Thermal Camera
Read more about the the features here
FAST
VIBER X5 MK III uses a new generation of floating point DSP processor from Texas Instruments (C6700 series), which ensures a very short data processing time.
RUGGED
Made for rough use in hard environments. IP65 casing and operating temperature of -20 to 70 °C
COMPATIBLE
VIBER X5 MK III uses SpectraPro® condition monitoring software to manage data. Using an existing database, it may be used together with Easy Viber, Easy Balancer and X-Viber instruments, just the way it is, with no other changes.
EASY TO USE
VIBER X5 MK III has a graphical user interface, a right and left hand operated keyboard and a user friendly context sensitive HELP.
The measurements are grouped so a beginner easily can handle them, but also the experienced users gets satisfied by the advanced measurement menus.
FLEXIBLE
The instrument works with al standard vibration transducer on the market.
In the Route measurement you may define a customized transducer for each measurement point; this makes most signals accessible, in order to get additional information that might improve the condition measurement quality.
The instrument is compatible with any external tachometer and also with standard 4-20 mA process transducers (flow, pressure, temperature and so.)
RELIABLE
VIBER X5 MK III™ is an essential tool for the monitoring of machine health. It has a high performance/ cost value and offers reliable measurements to ISO standards in combination with a range of smart features.
SPECS :
Digital
DSP Processor
Texas TMS320C6713B
Memory
Storage: 4 GB micro SD card 128 MB RAM
2*16 MB fast flash memory
Minimum spec. Actual spec. is depending on hardware revision
ADC
16 bit, max 192 KSPS simultaneous sampling
Display
Size & Resolution
5” Amorphous TFT LCD 480 x 272 pixels
Colours
65536
Signals in/out
AC inputs
All standard ICP accelerometers (4mA/24V), velocimeters or general purpose AC transducers in range 0-30 V RMS, VMI default transducers are automatically recognized
DC input
0 to 5 V
External reference
0,8 to 24 V
Built-in trans- ducers
Thermal camera
Resolotion 80x60, Temp range -20° to 250°C, Accuracy 2% or ± 2°C, Fild of view 51°H x 63°V, Minimum focus ditance 0.5m, Color plate Iron & Gray, Frame rate 9Hz.( Infrared )
Tachometer
30 - 60000 RPM , Retro-Reflective
Measurements
Processing
Direct, single or double integrated or derivated (configured in software upon used transducer and user request). Up to three channels simultaneous sampling.
Frequency range
0.5 to 32000 Hz Depending on transducer
Amplitude range
0 to 80 g Depending on transducer
Accuracy
0.01 g ± 1 % for non integrated
0.1 mm/s ± 2 % for single integrated
FFT lines
25600
Sampling rate
Up to 131072 Hz depending of selected frequency range ( Three channels simultaneous sampling )
Windowing
Selectable: Hanning, Hamming, Blackmann, Kaiser-Bessel
Power
Accumulators
6.2 Ah Li-ion fule gauge smart battery pack
Autonomy
12 hours typical use
Charging
4 hours typical charge time
Temperature
Operating
-20 °C to 70 °C (-4 °F to 158 °F)
Storage
-30 °C to 80 °C (-22 °F to 176 °F)
Sample of Accessories:
Current Clamp, use for speed measurements both for standard electrical motors and frequency controlled electrical motors, also for performing electrical motor test using the software MCSA, (Motor Current Signature Analyse).
3-Axial sensor, with real simultaneously measurements, can reduce work time up to 70%.
Animation measurements using software VibShape, can be performed very easily with the 3 axial sensor, makes it faster and easy to execute.
Balancing kit. Including External tacho (15 to 60000 RPM) with 5m cable, 2 pcs 5m
extension cables for transducers, fast and easy to setup magnet holder for the tacho, and a pocket Scale.
Also you can check product : NEW VMI VIBER X4 Portable Vibration Analyzer
VIBER X5 MK III is capable of measuring, processing, displaying and storing a wide range of measurement parameters. You can collect various types of field data; examples are vibration information,bearing analyze, temperature, speed and other process variables that enables you to expand its functionality by adding new measurements to improve your analysis capabilities. You may also use the VIBER X5 MK III for 1 or 2 plane balancing.
VIBER X5 MK III perfectly fits with the SpectraPro multipurpose software and it is also compatible with our other analyze instruments.
Features of VIBER X5 MK III:
Embedded Thermal Camera
Read more about the the features here
FAST
VIBER X5 MK III uses a new generation of floating point DSP processor from Texas Instruments (C6700 series), which ensures a very short data processing time.
RUGGED
Made for rough use in hard environments. IP65 casing and operating temperature of -20 to 70 °C
COMPATIBLE
VIBER X5 MK III uses SpectraPro® condition monitoring software to manage data. Using an existing database, it may be used together with Easy Viber, Easy Balancer and X-Viber instruments, just the way it is, with no other changes.
EASY TO USE
VIBER X5 MK III has a graphical user interface, a right and left hand operated keyboard and a user friendly context sensitive HELP.
The measurements are grouped so a beginner easily can handle them, but also the experienced users gets satisfied by the advanced measurement menus.
FLEXIBLE
The instrument works with al standard vibration transducer on the market.
In the Route measurement you may define a customized transducer for each measurement point; this makes most signals accessible, in order to get additional information that might improve the condition measurement quality.
The instrument is compatible with any external tachometer and also with standard 4-20 mA process transducers (flow, pressure, temperature and so.)
RELIABLE
VIBER X5 MK III™ is an essential tool for the monitoring of machine health. It has a high performance/ cost value and offers reliable measurements to ISO standards in combination with a range of smart features.
SPECS :
Digital
DSP Processor
Texas TMS320C6713B
Memory
Storage: 4 GB micro SD card 128 MB RAM
2*16 MB fast flash memory
Minimum spec. Actual spec. is depending on hardware revision
ADC
16 bit, max 192 KSPS simultaneous sampling
Display
Size & Resolution
5” Amorphous TFT LCD 480 x 272 pixels
Colours
65536
Signals in/out
AC inputs
All standard ICP accelerometers (4mA/24V), velocimeters or general purpose AC transducers in range 0-30 V RMS, VMI default transducers are automatically recognized
DC input
0 to 5 V
External reference
0,8 to 24 V
Built-in trans- ducers
Thermal camera
Resolotion 80x60, Temp range -20° to 250°C, Accuracy 2% or ± 2°C, Fild of view 51°H x 63°V, Minimum focus ditance 0.5m, Color plate Iron & Gray, Frame rate 9Hz.( Infrared )
Tachometer
30 - 60000 RPM , Retro-Reflective
Measurements
Processing
Direct, single or double integrated or derivated (configured in software upon used transducer and user request). Up to three channels simultaneous sampling.
Frequency range
0.5 to 32000 Hz Depending on transducer
Amplitude range
0 to 80 g Depending on transducer
Accuracy
0.01 g ± 1 % for non integrated
0.1 mm/s ± 2 % for single integrated
FFT lines
25600
Sampling rate
Up to 131072 Hz depending of selected frequency range ( Three channels simultaneous sampling )
Windowing
Selectable: Hanning, Hamming, Blackmann, Kaiser-Bessel
Power
Accumulators
6.2 Ah Li-ion fule gauge smart battery pack
Autonomy
12 hours typical use
Charging
4 hours typical charge time
Temperature
Operating
-20 °C to 70 °C (-4 °F to 158 °F)
Storage
-30 °C to 80 °C (-22 °F to 176 °F)
Sample of Accessories:
Current Clamp, use for speed measurements both for standard electrical motors and frequency controlled electrical motors, also for performing electrical motor test using the software MCSA, (Motor Current Signature Analyse).
3-Axial sensor, with real simultaneously measurements, can reduce work time up to 70%.
Animation measurements using software VibShape, can be performed very easily with the 3 axial sensor, makes it faster and easy to execute.
Balancing kit. Including External tacho (15 to 60000 RPM) with 5m cable, 2 pcs 5m
extension cables for transducers, fast and easy to setup magnet holder for the tacho, and a pocket Scale.
Also you can check product : NEW VMI VIBER X4 Portable Vibration Analyzer
VIBER X5VIBER X5 MK III is an advanced vibration analyzer, together with SpectraPro® PC software it provides a complete package for redictive condition maintenance.
VIBER X5 MK III™ is capable of measuring, processing, displaying and storing a wide range of measurement parameters. You can collect various types of field data; examples are vibration information,bearing analyze, temperature, speed and other process variables that enables you to expand its functionality by adding new measurements to improve your analysis capabilities.
NEW VMI Viber X3 Portable Vibration Analyzer (Viber X3)
VMI VIBER X3
Features
Real-time measurement of total vibration level and the bearing condition (BC), shown simultaneously
Largest amplitude peak frequency in CPM or Hz in main screen display
Fault analysis screen displaying the five highest peaks with amplitude and frequency one by one
Headphone set with volume control and high pass filter for bearing noise detection
Listening to a machine sounds (through the provided headphones) makes it possible for the user to listen to the machine while at the same time seeing the vibrations in the instrument display
Measurement units and measurement presentation may be selected from the following:
g (RMS, Peak or Peak-Peak)
mm/sec (RMS, Peak or Peak-Peak)
µm (RMS Peak or Peak-Peak)
inch/sec (RMS, Peak or Peak-Peak)
mils (RMS, Peak or Peak-Peak)
Large dynamic vibration range up to 1.76 oz (50 g)
Bearing Condition measurements in a wide frequency range (0.5 to 30 kHz)
Built-in infrared temperature sensor, select between °C or °F
Display with backlight; bar indicator shows measurement stability
Clear vibration, temperature and danger alarms by red and yellow colour LED's
Dust and waterproof, for rough use (IP 65)
Trend View Software
Easy to use, intuitive software
- Build machine and measuring points
- Collect data
- Trend measurements
- Determine machine problem
- Take corrective action
- Increase machinery uptime
Specifications
Input Amplitude Range Vibration: 1.76 oz (50g) RMS with other sensor up to 17.64 oz (500 g)
Bearing condition: Max 5 gBC
Dynamic Range 80 dB (159 Hz with auto ranging)
Frequency Range Vibration: 2 to 400 Hz, 10 to 1000 Hz, 6 to 1600 Hz, 11 to 3200 Hz
Bearing condition: 0.5 to 16 kHz
Vibration Units g-value, m/s², mm/s, in/s, µm, mils
Amplitude Presentation RMS, Peak, Peak-Peak
Frequency Range Same as "frequency range", except for 11-3200 Hz range, where peak detection ends at 2000 Hz
Storage Capacity 100 measurements can be stored
Three-point Balancing 10 balancing results can be stored
Interface USB 2.0
Sound Frequency 60 Hz to 10 kHz 26 dB to -4.1 dB
500 Hz to 10 kHz 26 dB to -4.1 dB
Temperature Range -4 to 248°F (-20 to 120°C)
Accuracy Vibration: ±3% f.s. is 50g for acceleration other units are frequency dependent
Bearing condition: ±5% over 0.5 gBC
Frequency/RPM: ±0.2%
Temperature: Emissivity factor must be set in accordance with the target surface
Display B&W LCD 64 x 120 pixels with background light
Power Supply Rechargeable lithium battery, 2300 mA/h
Dimensions 6.5 x 3.15 x 1.97" (165 x 80 x 50 mm)
Weight 14.64 oz (415 g)
Includes:
IP68 Case
Instrument
Transducer
Headphones
Extention tip
Charger
Rechargeable batteries
Cable for data transmission
Also you can check product : NEW VMI VIBER X5 MK III Advanced Vibration Analyzer
Features
Real-time measurement of total vibration level and the bearing condition (BC), shown simultaneously
Largest amplitude peak frequency in CPM or Hz in main screen display
Fault analysis screen displaying the five highest peaks with amplitude and frequency one by one
Headphone set with volume control and high pass filter for bearing noise detection
Listening to a machine sounds (through the provided headphones) makes it possible for the user to listen to the machine while at the same time seeing the vibrations in the instrument display
Measurement units and measurement presentation may be selected from the following:
g (RMS, Peak or Peak-Peak)
mm/sec (RMS, Peak or Peak-Peak)
µm (RMS Peak or Peak-Peak)
inch/sec (RMS, Peak or Peak-Peak)
mils (RMS, Peak or Peak-Peak)
Large dynamic vibration range up to 1.76 oz (50 g)
Bearing Condition measurements in a wide frequency range (0.5 to 30 kHz)
Built-in infrared temperature sensor, select between °C or °F
Display with backlight; bar indicator shows measurement stability
Clear vibration, temperature and danger alarms by red and yellow colour LED's
Dust and waterproof, for rough use (IP 65)
Trend View Software
Easy to use, intuitive software
- Build machine and measuring points
- Collect data
- Trend measurements
- Determine machine problem
- Take corrective action
- Increase machinery uptime
Specifications
Input Amplitude Range Vibration: 1.76 oz (50g) RMS with other sensor up to 17.64 oz (500 g)
Bearing condition: Max 5 gBC
Dynamic Range 80 dB (159 Hz with auto ranging)
Frequency Range Vibration: 2 to 400 Hz, 10 to 1000 Hz, 6 to 1600 Hz, 11 to 3200 Hz
Bearing condition: 0.5 to 16 kHz
Vibration Units g-value, m/s², mm/s, in/s, µm, mils
Amplitude Presentation RMS, Peak, Peak-Peak
Frequency Range Same as "frequency range", except for 11-3200 Hz range, where peak detection ends at 2000 Hz
Storage Capacity 100 measurements can be stored
Three-point Balancing 10 balancing results can be stored
Interface USB 2.0
Sound Frequency 60 Hz to 10 kHz 26 dB to -4.1 dB
500 Hz to 10 kHz 26 dB to -4.1 dB
Temperature Range -4 to 248°F (-20 to 120°C)
Accuracy Vibration: ±3% f.s. is 50g for acceleration other units are frequency dependent
Bearing condition: ±5% over 0.5 gBC
Frequency/RPM: ±0.2%
Temperature: Emissivity factor must be set in accordance with the target surface
Display B&W LCD 64 x 120 pixels with background light
Power Supply Rechargeable lithium battery, 2300 mA/h
Dimensions 6.5 x 3.15 x 1.97" (165 x 80 x 50 mm)
Weight 14.64 oz (415 g)
Includes:
IP68 Case
Instrument
Transducer
Headphones
Extention tip
Charger
Rechargeable batteries
Cable for data transmission
Also you can check product : NEW VMI VIBER X5 MK III Advanced Vibration Analyzer
Developed for vibration analysts, machine operators, and maintenance technicians. Easy to use, powerful for basic condition monitoring. Helps in maintaining machine reliability and verifying machinery repair. Store and trend condition data with Trend View.
NEW Pruftechnik Vibxpert 3 Balancer - Vibration Analysis and Balancing (Vibxpert 3)
VIBXPERT 3 BALANCER
The VibXpert 3 Balancer is a precision smart device designed for today’s workforce. Fast, intuitive, and user-friendly, it’s easy to operate even in the toughest environments. Even non-experts can use the VibXpert 3 to identify unbalance, correct it, and get right back to work.
The VibXpert 3 Balancer has six synchronous channels so that it can easily record multi-channel vibration measurements. Take measurements from multiple angles on the asset and its components. Record measurements simultaneously and compare them to historical data. Go straight to the root cause of the unbalance and correct it, right at the source.
An interactive touchscreen display guides workers through every step of the process. Teams can view measurement data on one convenient dashboard. Get step-by-step guidance on correcting the unbalance, and then measure again until the unbalance is thoroughly resolved.
VibXpert 3 puts cutting-edge diagnostic power in your hands. By making it easy to spot unbalance issues, the tool ensures that teams can fix issues early – before they grow into expensive, dangerous problems. The result? Greater uptime, more productivity, and lower maintenance costs.
Fast, accurate, advanced balancing device
Best practice and customizable machine templates
Modern data processing: 6 synchronous analog channels
Enhanced balancing reports
Simplified data management and analysis
Captures balancing data, overall vibration values, and spectral data
Large, user-friendly touchscreen
Dual-redundant button configuration
IP-65 rated, shockproof, scratch resistant and drop proof
The mobile solution for machinery health monitoring
The VibXpert 3 Balancer is an advanced smart condition monitoring field balancing tool that enables users to quickly and effectively correct unbalance faults.
With the VibXpert 3 Balancer, users can:
Increase the reliability of their machinery by reducing excessive machine vibration levels
Improve safety by reducing potential equipment hazards
Improve uptime by promptly identifying and correcting unbalance
Help meet industry standards and regulatory compliance requirements
Improve energy efficiency of rotating machinery, providing cost savings
Maximize the efficiency, quality, and accuracy of field balancing jobs
The result is extended peak operating asset performance, more effective resource use, and increased business value from operations.
TECHNOLOGY
The next-generation field balancing solution.
Unbalance, resulting from uneven mass distribution around a rotational axis is the leading cause of unplanned downtime and costly damage.
Today, machines operate at variable speeds, sometimes near their engineered capacity, increasing the risk of resonant vibration. Balanced machines mitigate this risk. The VibXpert 3 Balancer offers a highly efficient and user-centric experience, faster balancing results with better insights, and enhanced fault detection on rotating assets.
Machine templates
It boasts an interactive user interface with preconfigured and customizable machine templates, reducing the complexity of the balancing process.
Modern data processing
Its modern data processing capability, optimized software-based calculations from raw sensor data offers faster measurements, complete insights during balancing (including overall vibration levels, FFT spectra, phase, and time waveform).
6-channel measurements
VibXpert 3 Balancer enhances fault detection through synchronous 6-channel measurement, enabling users to minimize overall vibration levels simultaneously across all machine measurement points
Enhanced balancing reports
Balancing reports encompassing all necessary information for users, including overall vibration levels, spectral graphs, polar plots, and machinery details, among others.
SPECS :
Model
VIBXPERT 3
Number of Analog Channels
6
Number of Trigger Points
2
Sampling rate
Up to 131 kHz per channel (trigger 1048 kHz)
Viewing Angle
<150°
Dynamic Range
108 dB
Connector
1 and 4: Triaxial sensor, single axial sensor, and Vibcode
2, 3, 5, 6: Single axial sensor
Signal Processing
6 x 24 bit ADCs (trigger 2 x 14 bit)
RPM
10 – 120 000 1/min / ±0.010/00 or ±1 1/min (the lower accuracy is applicable)
Typical Operation Time
8 hrs
Dimensions (L x W x H)
326 x 210 x 56 mm (12.83 x 8.27 x 2.2 in)
Weight
2.2 kg (77.6 oz)
Also you can check product : NEW Pruftechnik VIBSCANNER 2 EX High-Speed Vibration Measurement Tool
The VibXpert 3 Balancer is a precision smart device designed for today’s workforce. Fast, intuitive, and user-friendly, it’s easy to operate even in the toughest environments. Even non-experts can use the VibXpert 3 to identify unbalance, correct it, and get right back to work.
The VibXpert 3 Balancer has six synchronous channels so that it can easily record multi-channel vibration measurements. Take measurements from multiple angles on the asset and its components. Record measurements simultaneously and compare them to historical data. Go straight to the root cause of the unbalance and correct it, right at the source.
An interactive touchscreen display guides workers through every step of the process. Teams can view measurement data on one convenient dashboard. Get step-by-step guidance on correcting the unbalance, and then measure again until the unbalance is thoroughly resolved.
VibXpert 3 puts cutting-edge diagnostic power in your hands. By making it easy to spot unbalance issues, the tool ensures that teams can fix issues early – before they grow into expensive, dangerous problems. The result? Greater uptime, more productivity, and lower maintenance costs.
Fast, accurate, advanced balancing device
Best practice and customizable machine templates
Modern data processing: 6 synchronous analog channels
Enhanced balancing reports
Simplified data management and analysis
Captures balancing data, overall vibration values, and spectral data
Large, user-friendly touchscreen
Dual-redundant button configuration
IP-65 rated, shockproof, scratch resistant and drop proof
The mobile solution for machinery health monitoring
The VibXpert 3 Balancer is an advanced smart condition monitoring field balancing tool that enables users to quickly and effectively correct unbalance faults.
With the VibXpert 3 Balancer, users can:
Increase the reliability of their machinery by reducing excessive machine vibration levels
Improve safety by reducing potential equipment hazards
Improve uptime by promptly identifying and correcting unbalance
Help meet industry standards and regulatory compliance requirements
Improve energy efficiency of rotating machinery, providing cost savings
Maximize the efficiency, quality, and accuracy of field balancing jobs
The result is extended peak operating asset performance, more effective resource use, and increased business value from operations.
TECHNOLOGY
The next-generation field balancing solution.
Unbalance, resulting from uneven mass distribution around a rotational axis is the leading cause of unplanned downtime and costly damage.
Today, machines operate at variable speeds, sometimes near their engineered capacity, increasing the risk of resonant vibration. Balanced machines mitigate this risk. The VibXpert 3 Balancer offers a highly efficient and user-centric experience, faster balancing results with better insights, and enhanced fault detection on rotating assets.
Machine templates
It boasts an interactive user interface with preconfigured and customizable machine templates, reducing the complexity of the balancing process.
Modern data processing
Its modern data processing capability, optimized software-based calculations from raw sensor data offers faster measurements, complete insights during balancing (including overall vibration levels, FFT spectra, phase, and time waveform).
6-channel measurements
VibXpert 3 Balancer enhances fault detection through synchronous 6-channel measurement, enabling users to minimize overall vibration levels simultaneously across all machine measurement points
Enhanced balancing reports
Balancing reports encompassing all necessary information for users, including overall vibration levels, spectral graphs, polar plots, and machinery details, among others.
SPECS :
Model
VIBXPERT 3
Number of Analog Channels
6
Number of Trigger Points
2
Sampling rate
Up to 131 kHz per channel (trigger 1048 kHz)
Viewing Angle
<150°
Dynamic Range
108 dB
Connector
1 and 4: Triaxial sensor, single axial sensor, and Vibcode
2, 3, 5, 6: Single axial sensor
Signal Processing
6 x 24 bit ADCs (trigger 2 x 14 bit)
RPM
10 – 120 000 1/min / ±0.010/00 or ±1 1/min (the lower accuracy is applicable)
Typical Operation Time
8 hrs
Dimensions (L x W x H)
326 x 210 x 56 mm (12.83 x 8.27 x 2.2 in)
Weight
2.2 kg (77.6 oz)
Also you can check product : NEW Pruftechnik VIBSCANNER 2 EX High-Speed Vibration Measurement Tool
The VibXpert 3 Balancer is an advanced smart condition monitoring field balancing tool that enables users to quickly and effectively correct unbalance faults. Increase the reliability of their machinery by reducing excessive machine vibration levels. Improve safety by reducing potential equipment hazards, Improve uptime by promptly identifying and correcting unbalance, Help meet industry standards and regulatory compliance requirements, Improve energy efficiency of rotating machinery, providing cost savings, Maximize the efficiency, quality, and accuracy of field balancing jobs.
NEW ACES System Viper II Vibration Analyzer and Balancer (Viper II)
Viper II Vibration Analyzer & Balancer
Transient Fan/Turbine Balance
Transient Vibration Survey
Fan Blade Mapper
TFE 731 Performance
The Viper II Vibration Analyzer is a versatile yet compact instrument that combines all of the diverse technologies required for high-end jet engine vibration analysis, transient balance, rotor track and balance, fan trim balance, propeller balance and acoustic analysis into one tool. All of these maintenance functions can be easily performed on virtually any airframe and/or engine type using the VIPER II.
TRANSIENT VIBRATION ANALYSIS
Accurate High-Speed Run-up & Coast-Down Transient Surveys
At approximately 6.0 pounds, powered by an internal battery and using minimal cabling, the VIPER II delivers vibration analysis at speed and accuracy levels typically available only in manufacturer test cells.
TRACK & BALANCE
Quick, Automated Track & Balance Solutions
The compact VIPER II provides accurate solutions in the minimum number of runs, saving costly run time and fuel. Setups are entered into the analyzer which can be customized by the user to accommodate virtually any engine and airframe type.
TRANSIENT FAN/TURBINE BALANCE
Save Time and Money by Collecting Data in a Single Sweep
Transient Balance is a method of collecting vibration data at all engine speeds during a balance run, eliminating the need to manually select and dwell at specific speeds. This is one of the most innovative features of the VIPER II, and it maximizes testing efficiency.
FEATURES :
Transient Balance yields test cell quality balancing results
Direct PDF report generation onto a USB flash drive
eSetups eliminate the need for charts
SmartTach speed and phase processing allows direct measurement of the engine speed signal
Four-channel simultaneous data acquisition (10 spectra/second/channel) for striking speed and accuracy
Multiple speed inputs for multiple rotor speed tracking during transient analysis
Multiple USB ports for direct connection to peripherals.
APPLICATIONS :
Transient Balance
Propeller Balance
Rotor Track & Balance
Fan Trim Balance
Vibration & Acoustic Analysis
SPECS :
Vibration Input
9.5V Pk-Pk, 0 to 240 IPS Peak with 20 mV per IPS sensor
Sensor Types
Accepts any vibration signal input (acceleration, velocity, displacement) and any voltage generating sensor. External charge amplifier required for charge mode.
Vibration Amplitude Accuracy
±1% across frequency range
Frequency Range
selectable up to 30kHz (1,800,000 RPM)
Tachometer Inputs
Better than 1 degree phase accuracy 60 to 60,000 RPM
Display
7″ Day/Night Readable Color LCD Display with Superbright LED Backlight
Memory
1 GB Flash
Dimensions
10.5 inches wide, 9.75 inches long, 5 inches deep
Weight
Approximately 6.0 pounds (2.8 kilos)
Power Requirements
Smart Li-Ion Battery (Internal), 87 Wh
Operating Time
8.0 hours
Charging Time
3.0 Hours (approximately)
Vibration Channels
4 ea.
Tach / Mag Pickup
4 ea.
Trax Optical Tracker
1 ea.
Strobe
1 ea.
USB Port
2 ea.
Phase Accuracy
<1°
Balance Frequency
60-60,000RPM,± 0.2%
Vibration Freq Range
0-30 kHz
Vibration Amplitude
0-240 IPS (peak), 20 mV / IPS
Dynamic Range
98dB
Operating Temperature
-4° to 120° F (-20° to 49°C)
Relative Humidity
10-85% (non-condensing)
AC Input
The data acquisition system is capable of measuring AC values to 9.5V Peak-Peak.
Sensor Types
The analyzer will accept any vibration signal input (acceleration, velocity, or displacement.) The input is then displayed as collected or integrated to any other vibration unit. The vibration input will accept any voltage -generating sensor (must have external charge converter when in charge mode) and will supply power to the sensor when required. The Cobra II only accepts acceleration or velocity inputs.
Analysis Range
Anti-aliasing filters are used with a Fast Fourier Transform (FFT) to accurately transform data from the time to the frequency domain. The analyzer will perform FFT resolutions of 100, 200, 400, 800, 1600, and 3200 lines.
Also you can check product : NEW Viper 2E Vibration Analyzer - Balancer - 4 Channel Analyzer
Transient Fan/Turbine Balance
Transient Vibration Survey
Fan Blade Mapper
TFE 731 Performance
The Viper II Vibration Analyzer is a versatile yet compact instrument that combines all of the diverse technologies required for high-end jet engine vibration analysis, transient balance, rotor track and balance, fan trim balance, propeller balance and acoustic analysis into one tool. All of these maintenance functions can be easily performed on virtually any airframe and/or engine type using the VIPER II.
TRANSIENT VIBRATION ANALYSIS
Accurate High-Speed Run-up & Coast-Down Transient Surveys
At approximately 6.0 pounds, powered by an internal battery and using minimal cabling, the VIPER II delivers vibration analysis at speed and accuracy levels typically available only in manufacturer test cells.
TRACK & BALANCE
Quick, Automated Track & Balance Solutions
The compact VIPER II provides accurate solutions in the minimum number of runs, saving costly run time and fuel. Setups are entered into the analyzer which can be customized by the user to accommodate virtually any engine and airframe type.
TRANSIENT FAN/TURBINE BALANCE
Save Time and Money by Collecting Data in a Single Sweep
Transient Balance is a method of collecting vibration data at all engine speeds during a balance run, eliminating the need to manually select and dwell at specific speeds. This is one of the most innovative features of the VIPER II, and it maximizes testing efficiency.
FEATURES :
Transient Balance yields test cell quality balancing results
Direct PDF report generation onto a USB flash drive
eSetups eliminate the need for charts
SmartTach speed and phase processing allows direct measurement of the engine speed signal
Four-channel simultaneous data acquisition (10 spectra/second/channel) for striking speed and accuracy
Multiple speed inputs for multiple rotor speed tracking during transient analysis
Multiple USB ports for direct connection to peripherals.
APPLICATIONS :
Transient Balance
Propeller Balance
Rotor Track & Balance
Fan Trim Balance
Vibration & Acoustic Analysis
SPECS :
Vibration Input
9.5V Pk-Pk, 0 to 240 IPS Peak with 20 mV per IPS sensor
Sensor Types
Accepts any vibration signal input (acceleration, velocity, displacement) and any voltage generating sensor. External charge amplifier required for charge mode.
Vibration Amplitude Accuracy
±1% across frequency range
Frequency Range
selectable up to 30kHz (1,800,000 RPM)
Tachometer Inputs
Better than 1 degree phase accuracy 60 to 60,000 RPM
Display
7″ Day/Night Readable Color LCD Display with Superbright LED Backlight
Memory
1 GB Flash
Dimensions
10.5 inches wide, 9.75 inches long, 5 inches deep
Weight
Approximately 6.0 pounds (2.8 kilos)
Power Requirements
Smart Li-Ion Battery (Internal), 87 Wh
Operating Time
8.0 hours
Charging Time
3.0 Hours (approximately)
Vibration Channels
4 ea.
Tach / Mag Pickup
4 ea.
Trax Optical Tracker
1 ea.
Strobe
1 ea.
USB Port
2 ea.
Phase Accuracy
<1°
Balance Frequency
60-60,000RPM,± 0.2%
Vibration Freq Range
0-30 kHz
Vibration Amplitude
0-240 IPS (peak), 20 mV / IPS
Dynamic Range
98dB
Operating Temperature
-4° to 120° F (-20° to 49°C)
Relative Humidity
10-85% (non-condensing)
AC Input
The data acquisition system is capable of measuring AC values to 9.5V Peak-Peak.
Sensor Types
The analyzer will accept any vibration signal input (acceleration, velocity, or displacement.) The input is then displayed as collected or integrated to any other vibration unit. The vibration input will accept any voltage -generating sensor (must have external charge converter when in charge mode) and will supply power to the sensor when required. The Cobra II only accepts acceleration or velocity inputs.
Analysis Range
Anti-aliasing filters are used with a Fast Fourier Transform (FFT) to accurately transform data from the time to the frequency domain. The analyzer will perform FFT resolutions of 100, 200, 400, 800, 1600, and 3200 lines.
Also you can check product : NEW Viper 2E Vibration Analyzer - Balancer - 4 Channel Analyzer
The Viper II Vibration Analyzer is a versatile yet compact instrument that combines all of the diverse technologies required for high-end jet engine vibration analysis, transient balance, rotor track and balance, fan trim balance, propeller balance and acoustic analysis into one tool. All of these maintenance functions can be easily performed on virtually any airframe and/or engine type using the VIPER II. Accurate High-Speed Run-up & Coast-Down Transient Surveys.
NEW ACES System Viper 2E Vibration Analyzer - Balancer - 4 Channel Analyzer (Viper 2E)
Viper 2E Vibration Analyzer & Balancer 4-CHANNEL ANALYZER
The Viper 2E Vibration and Performance Analyzer is a compact instrument with all the power of the Viper and Viper 2 platforms. Designed for the harshest of environments with EMI Shielding and new cabling. Vibration and Acoustic Analysis on Jet Engines and Airframes, Transient Balance, Fan Trim Balance, and even Propeller Balance features are ready to go anywhere you are.
TRANSIENT VIBRATION ANALYSIS
Accurate High-Speed Acceleration and/or Deceleration Transient Surveys
Powered by an internal battery and using minimal cabling, the V2E delivers vibration analysis at speed and accuracy levels typically available only in manufacturer test cells.
TRANSIENT BALANCE
Save Time and Money by Collecting Data in a Single Sweep
Transient Balance makes it possible to balance the engine from Idle to Max Power, instead of focusing only on single speed points. Test Cell quality balances on wing are possible.
MIL-SPEC DESIGN
Ensure Reliability of Measurements in Harsh Environments
Designed for MIL-PRF-28800F Class 2, the V2E protects from EMI, dust, water, and impacts faced in rugged, harsh environments. All cables have been built to MIL-SPEC standards which includes EMI hardening and longer durability.
FEATURES :
Transient Balance yields test cell quality balancing results on-wing
Direct PDF report generation to provide an easy summary of maintenance actions
.CSV export of raw data for further analysis
SmartTach speed and phase processing allows direct measurement of the engine speed signal
Four-channel simultaneous data acquisition (10 spectra/second/channel) for striking speed and accuracy
Mil-Spec USB port for secure connection to encrypted Spindle Drives
Housed in ZERO case for maximum environmental protection.
APPLICATIONS :
Transient Balance
Propeller Balance
Fan Trim Balance
Vibration & Acoustic Analysis
Rotor Track and Balance
SPECS :
Vibration Input
9.5V Pk-Pk, 0 to 240 IPS Peak with 20 mV per IPS sensor
Sensor Types
Accepts any vibration signal input (acceleration, velocity, displacement, acoustic, and strain) and any voltage generating sensor.
Vibration Amplitude Accuracy
±1% across frequency range
Frequency Range
Selectable up to 30kHz (1,800,000 RPM)
Tachometer Inputs
Better than 1° phase accuracy 60 to 60,000 RPM
Display
7″ Day/Night Readable Color LCD Display with Super-bright LED Backlight
Power
Smart Li-Ion Battery with 8-hour operating time
Memory
1 GB flash
Operating Temperature
-20° to 49° C (-4° to 120° F)
Relative Humidity
10-85% (non-condensing)
Storage
-20° to 60° C (-4° to 140° F)
Dimensions (L*W*H)
12″ x 9″ x 5″
Weight:
9.0 lbs (4.1 kg)
Also you can check product : NEW ACES System Viper II Vibration Analyzer and Balancer
The Viper 2E Vibration and Performance Analyzer is a compact instrument with all the power of the Viper and Viper 2 platforms. Designed for the harshest of environments with EMI Shielding and new cabling. Vibration and Acoustic Analysis on Jet Engines and Airframes, Transient Balance, Fan Trim Balance, and even Propeller Balance features are ready to go anywhere you are.
TRANSIENT VIBRATION ANALYSIS
Accurate High-Speed Acceleration and/or Deceleration Transient Surveys
Powered by an internal battery and using minimal cabling, the V2E delivers vibration analysis at speed and accuracy levels typically available only in manufacturer test cells.
TRANSIENT BALANCE
Save Time and Money by Collecting Data in a Single Sweep
Transient Balance makes it possible to balance the engine from Idle to Max Power, instead of focusing only on single speed points. Test Cell quality balances on wing are possible.
MIL-SPEC DESIGN
Ensure Reliability of Measurements in Harsh Environments
Designed for MIL-PRF-28800F Class 2, the V2E protects from EMI, dust, water, and impacts faced in rugged, harsh environments. All cables have been built to MIL-SPEC standards which includes EMI hardening and longer durability.
FEATURES :
Transient Balance yields test cell quality balancing results on-wing
Direct PDF report generation to provide an easy summary of maintenance actions
.CSV export of raw data for further analysis
SmartTach speed and phase processing allows direct measurement of the engine speed signal
Four-channel simultaneous data acquisition (10 spectra/second/channel) for striking speed and accuracy
Mil-Spec USB port for secure connection to encrypted Spindle Drives
Housed in ZERO case for maximum environmental protection.
APPLICATIONS :
Transient Balance
Propeller Balance
Fan Trim Balance
Vibration & Acoustic Analysis
Rotor Track and Balance
SPECS :
Vibration Input
9.5V Pk-Pk, 0 to 240 IPS Peak with 20 mV per IPS sensor
Sensor Types
Accepts any vibration signal input (acceleration, velocity, displacement, acoustic, and strain) and any voltage generating sensor.
Vibration Amplitude Accuracy
±1% across frequency range
Frequency Range
Selectable up to 30kHz (1,800,000 RPM)
Tachometer Inputs
Better than 1° phase accuracy 60 to 60,000 RPM
Display
7″ Day/Night Readable Color LCD Display with Super-bright LED Backlight
Power
Smart Li-Ion Battery with 8-hour operating time
Memory
1 GB flash
Operating Temperature
-20° to 49° C (-4° to 120° F)
Relative Humidity
10-85% (non-condensing)
Storage
-20° to 60° C (-4° to 140° F)
Dimensions (L*W*H)
12″ x 9″ x 5″
Weight:
9.0 lbs (4.1 kg)
Also you can check product : NEW ACES System Viper II Vibration Analyzer and Balancer
The Viper 2E Vibration and Performance Analyzer is a compact instrument with all the power of the Viper and Viper 2 platforms. Designed for the harshest of environments with EMI Shielding and new cabling. Vibration and Acoustic Analysis on Jet Engines and Airframes, Transient Balance, Fan Trim Balance, and even Propeller Balance features are ready to go anywhere you are.
NEW ACES System Cobra II 2-Channel Vibration and Balancing Analyzer (Cobra II)
2-Channel Vibration & Balancing Analyzer
The COBRA II dual channel vibration analyzer is a versatile yet compact instrument that combines all of the diverse technologies required for high-end engine vibration analysis, rotor track and balance, and propeller balance into one tool. With the Cobra II, all of these maintenance functions can be easily performed on virtually any airframe and engine type, such as a 2-propeller airplane.
LARGE FULL-COLOR SCREEN
The COBRA II has a large, high-resolution, transmissive, full-color display with a super-bright LED backlight that can be easily viewed in direct sunlight.
PDF REPORTING
Generate PDF reports directly from the analyzer and store on a USB flash drive to be printed or saved in a separate location to retain accurate maintenance records.
PORTABLE CONVENIENCE
Data storage, transfer, display and analysis is independent of any proprietary software and a PC interface. Application notes and eSetups are now available to download directly to the analyzer via the web.
SOLUTIONS GENERATED
The compact COBRA II dual channel analyzer provides accurate solutions in the minimum number of runs, saving costly run time and fuel. Our solutions are extremely valuable tools that are not offered in similar vibration analysis and balancing instruments as a standard feature for this market.
FEATURES :
Large full-color screen
PDF Reporting
Portable Convenience
Solutions Generated
Industry-Unique, no-cost, 5-year warranty
APPLICATIONS :
Propeller Balance
Main Rotor Track & Balance
Tail Rotor Balance
Overall Vibration Survey
Vibration Spectrum Survey
SPECS :
Vibration Input
9.5V Pk-Pk, 0 to 240 IPS Peak with 20 mV per IPS sensor
Sensor Types
Accepts any vibration signal input (acceleration, velocity, displacement) and any voltage generating sensor. External charge amplifier required for charge mode.
Vibration Amplitude Accuracy
±1% across frequency range
Frequency Range
selectable up to 30kHz (1,800,000 RPM)
Tachometer Inputs
Better than 1 degree phase accuracy 60 to 10,000 RPM
Display
7″ Day/Night Readable Color LCD Display with Superbright LED Backlight
Memory
1 GB Flash
Dimensions
10.5 inches wide, 9.75 inches long, 5 inches deep
Weight
Approximately 6.0 pounds (2.8 kilos)
Power Requirements
Smart Li-Ion Battery (Internal), 87 Wh
Operating Time
8.0 hours
Charging Time
3.0 Hours (approximately)
Vibration Channels
2 ea.
Tach / Mag Pickup
2 ea.
Trax Optical Tracke
1 ea.
Strobe
1 ea.
USB Port
2 ea.
Phase Accuracy
<1°
Balance Frequency
60-10,000 RPM,± 0.2%
Vibration Freq Range
0-30 kHz
Vibration Amplitude
0-240 IPS (peak), 20 mV / IPS
Dynamic Range
98dB
Operating Temperature
-4° to 120° F (-20° to 49°C)
Relative Humidity
10-85% (non-condensing)
AC Input
The data acquisition system is capable of measuring AC values to 9.5V Peak-Peak.
Sensor Types
The analyzer will accept any vibration signal input (acceleration, velocity, or displacement.) The input is then displayed as collected or integrated to any other vibration unit. The vibration input will accept any voltage -generating sensor (must have external charge converter when in charge mode) and will supply power to the sensor when required. The Cobra II only accepts acceleration or velocity inputs.
Analysis Range
Anti-aliasing filters are used with a Fast Fourier Transform (FFT) to accurately transform data from the time to the frequency domain. The analyzer will perform FFT resolutions of 100, 200, 400, 800, 1600, and 3200 lines.
Also you can check product : NEW ACES System Viper II Vibration Analyzer and Balancer
The COBRA II dual channel vibration analyzer is a versatile yet compact instrument that combines all of the diverse technologies required for high-end engine vibration analysis, rotor track and balance, and propeller balance into one tool. With the Cobra II, all of these maintenance functions can be easily performed on virtually any airframe and engine type, such as a 2-propeller airplane.
LARGE FULL-COLOR SCREEN
The COBRA II has a large, high-resolution, transmissive, full-color display with a super-bright LED backlight that can be easily viewed in direct sunlight.
PDF REPORTING
Generate PDF reports directly from the analyzer and store on a USB flash drive to be printed or saved in a separate location to retain accurate maintenance records.
PORTABLE CONVENIENCE
Data storage, transfer, display and analysis is independent of any proprietary software and a PC interface. Application notes and eSetups are now available to download directly to the analyzer via the web.
SOLUTIONS GENERATED
The compact COBRA II dual channel analyzer provides accurate solutions in the minimum number of runs, saving costly run time and fuel. Our solutions are extremely valuable tools that are not offered in similar vibration analysis and balancing instruments as a standard feature for this market.
FEATURES :
Large full-color screen
PDF Reporting
Portable Convenience
Solutions Generated
Industry-Unique, no-cost, 5-year warranty
APPLICATIONS :
Propeller Balance
Main Rotor Track & Balance
Tail Rotor Balance
Overall Vibration Survey
Vibration Spectrum Survey
SPECS :
Vibration Input
9.5V Pk-Pk, 0 to 240 IPS Peak with 20 mV per IPS sensor
Sensor Types
Accepts any vibration signal input (acceleration, velocity, displacement) and any voltage generating sensor. External charge amplifier required for charge mode.
Vibration Amplitude Accuracy
±1% across frequency range
Frequency Range
selectable up to 30kHz (1,800,000 RPM)
Tachometer Inputs
Better than 1 degree phase accuracy 60 to 10,000 RPM
Display
7″ Day/Night Readable Color LCD Display with Superbright LED Backlight
Memory
1 GB Flash
Dimensions
10.5 inches wide, 9.75 inches long, 5 inches deep
Weight
Approximately 6.0 pounds (2.8 kilos)
Power Requirements
Smart Li-Ion Battery (Internal), 87 Wh
Operating Time
8.0 hours
Charging Time
3.0 Hours (approximately)
Vibration Channels
2 ea.
Tach / Mag Pickup
2 ea.
Trax Optical Tracke
1 ea.
Strobe
1 ea.
USB Port
2 ea.
Phase Accuracy
<1°
Balance Frequency
60-10,000 RPM,± 0.2%
Vibration Freq Range
0-30 kHz
Vibration Amplitude
0-240 IPS (peak), 20 mV / IPS
Dynamic Range
98dB
Operating Temperature
-4° to 120° F (-20° to 49°C)
Relative Humidity
10-85% (non-condensing)
AC Input
The data acquisition system is capable of measuring AC values to 9.5V Peak-Peak.
Sensor Types
The analyzer will accept any vibration signal input (acceleration, velocity, or displacement.) The input is then displayed as collected or integrated to any other vibration unit. The vibration input will accept any voltage -generating sensor (must have external charge converter when in charge mode) and will supply power to the sensor when required. The Cobra II only accepts acceleration or velocity inputs.
Analysis Range
Anti-aliasing filters are used with a Fast Fourier Transform (FFT) to accurately transform data from the time to the frequency domain. The analyzer will perform FFT resolutions of 100, 200, 400, 800, 1600, and 3200 lines.
Also you can check product : NEW ACES System Viper II Vibration Analyzer and Balancer
The COBRA II dual channel vibration analyzer is a versatile yet compact instrument that combines all of the diverse technologies required for high-end engine vibration analysis, rotor track and balance, and propeller balance into one tool. With the Cobra II, all of these maintenance functions can be easily performed on virtually any airframe and engine type, such as a 2-propeller airplane. The COBRA II has a large, high-resolution, transmissive, full-color display with a super-bright LED backlight that can be easily viewed in direct sunlight.
NEW ACES System ProBalancer PL2020 Vibration Analyzer and Balancer (ProBalancer PL2020)
Increase your plane or helicopter’s performance today with the ACES Systems ProBalancer Analyzer.
For those who need a little more horsepower than the ProBalancer Sport, we offer the Model 2020PL ProBalancer Vibration Analyzer Balancer. It provides step-by-step on-screen instructions for performing propeller balancing, rotor track and balance measurements and vibration surveys at an affordable price.
APPLICATIONS:
Dynamic Propeller Balance
Rotor Track & Balance
Vibration Surveys
BENEFITS OF BALANCING INCLUDE:
Reduce Component Wear
Increase Aircraft Performance
Reduce Crew Fatigue
Increase Safety
THE MODEL 2020 PL PROBALANCER FEATURES:
One-shot balancing
Automated weight placement solutions
Stores reusable setups
Graphic spectral display with curser and backlit LED screen
Dual channel, expanded views and simultaneous inputs
Supports multiple sensor types
Includes an industry-unique 5-year warranty
The ACES 2020 ProBalancer Kit includes all the vibration analyzing and balancing equipment required to improve the performance of your helicopter or plane. Contact our sales team today for a quote on our high-performance ACES propeller balancer.
FEATURES :
Graphic spectral display with cursor, expanded views, and backlighting
Dual channel, simultaneous inputs
Maintains prior influences to compute one-shot balance
Programmable propeller balance influences
Split weights to existing holes (available with EPS)
Supports multiple sensor types
Powered by rechargeable battery or ship’s power
Guaranteed reliability with an industry-unique FREE 5-year warranty on workmanship and materials
SPECS :
Accuracy
Vibration Amplitude: ± 5%, 0-10 IPS Frequency Range: 0-12 KHz (720,000 RPM) per channel when collecting on both channels simultaneously OR 0-20 KHz (1,200,000 RPM) when collecting on a single channel Tachometer Inputs: ± 0.3%, 100-10,000 rpm
Power Supply
Type: Nickel Metal Hydride (NiMH) 12V, 4.5 Amp-hour internal Operation Time: 10 – 12 hours (optimum) Charging Time: 2 hours
Voltage
12 V DC Battery or 14-28 V DC ship’s power
Physical
Height: 9.3 inches Width: 7.5 inches Depth: 4.4 inches Weight: 4.8 lbs. Operating Temperature: 0 to 50C
AC Input
The data acquisition system is capable of measuring AC values from 0.1 volt to 2.048 volts peak
Tachometer- Synchronized Measurements
The analyzer can use the tachometer input to synchronously sample and average data. These data contain phase information for vibration related to the tachometer. The analyzer can report phase to ±3 degrees for this vibration, which is reproducible to 1 degree.
Unconditioned Tachometer Input
Tachometer signal processing electronics are capable of adjusting the full-scale input range to handle any available sensor for measuring speed. Adjustment of the tachometer conditioning electronics is performed automatically by the microprocessor and requires no user intervention. The voltage level that is used as a reference for detection of the start of the revolution can be adjusted from 120mV to 5 volts. The tachometer circuitry can detect speeds up to 10.000 RPM.
Auto-ranging Input
The analyzer auto-ranges all signal inputs based on sensor sensitivity. That way, it can determine the optimum gain setting to achieve the maximum dynamic range. Gains are adjusted by factors of two (1 to 512) for all channels. This adjustment enables the analyzer to perform each measurement without overload and with maximum accuracy.
Sensor Types
The analyzer will accept any vibration signal input (acceleration, velocity, or displacement). The input is then displayed as collected or integrated to another vibration unit. The vibration input will accept any voltage-generating sensor (must have external charge converter when required).
Analysis Range
Data is accurately transformed from the time to frequency domain using a high roll-off, 8-pole elliptical, anti-aliasing filter with a Fast Fourier Transformer (FFT). The analyzer will perform FFT resolutions of 100, 200, 400, and 800 lines.
Also you can check product : NEW ACES System Cobra II 2-Channel Vibration and Balancing Analyzer
For those who need a little more horsepower than the ProBalancer Sport, we offer the Model 2020PL ProBalancer Vibration Analyzer Balancer. It provides step-by-step on-screen instructions for performing propeller balancing, rotor track and balance measurements and vibration surveys at an affordable price.
APPLICATIONS:
Dynamic Propeller Balance
Rotor Track & Balance
Vibration Surveys
BENEFITS OF BALANCING INCLUDE:
Reduce Component Wear
Increase Aircraft Performance
Reduce Crew Fatigue
Increase Safety
THE MODEL 2020 PL PROBALANCER FEATURES:
One-shot balancing
Automated weight placement solutions
Stores reusable setups
Graphic spectral display with curser and backlit LED screen
Dual channel, expanded views and simultaneous inputs
Supports multiple sensor types
Includes an industry-unique 5-year warranty
The ACES 2020 ProBalancer Kit includes all the vibration analyzing and balancing equipment required to improve the performance of your helicopter or plane. Contact our sales team today for a quote on our high-performance ACES propeller balancer.
FEATURES :
Graphic spectral display with cursor, expanded views, and backlighting
Dual channel, simultaneous inputs
Maintains prior influences to compute one-shot balance
Programmable propeller balance influences
Split weights to existing holes (available with EPS)
Supports multiple sensor types
Powered by rechargeable battery or ship’s power
Guaranteed reliability with an industry-unique FREE 5-year warranty on workmanship and materials
SPECS :
Accuracy
Vibration Amplitude: ± 5%, 0-10 IPS Frequency Range: 0-12 KHz (720,000 RPM) per channel when collecting on both channels simultaneously OR 0-20 KHz (1,200,000 RPM) when collecting on a single channel Tachometer Inputs: ± 0.3%, 100-10,000 rpm
Power Supply
Type: Nickel Metal Hydride (NiMH) 12V, 4.5 Amp-hour internal Operation Time: 10 – 12 hours (optimum) Charging Time: 2 hours
Voltage
12 V DC Battery or 14-28 V DC ship’s power
Physical
Height: 9.3 inches Width: 7.5 inches Depth: 4.4 inches Weight: 4.8 lbs. Operating Temperature: 0 to 50C
AC Input
The data acquisition system is capable of measuring AC values from 0.1 volt to 2.048 volts peak
Tachometer- Synchronized Measurements
The analyzer can use the tachometer input to synchronously sample and average data. These data contain phase information for vibration related to the tachometer. The analyzer can report phase to ±3 degrees for this vibration, which is reproducible to 1 degree.
Unconditioned Tachometer Input
Tachometer signal processing electronics are capable of adjusting the full-scale input range to handle any available sensor for measuring speed. Adjustment of the tachometer conditioning electronics is performed automatically by the microprocessor and requires no user intervention. The voltage level that is used as a reference for detection of the start of the revolution can be adjusted from 120mV to 5 volts. The tachometer circuitry can detect speeds up to 10.000 RPM.
Auto-ranging Input
The analyzer auto-ranges all signal inputs based on sensor sensitivity. That way, it can determine the optimum gain setting to achieve the maximum dynamic range. Gains are adjusted by factors of two (1 to 512) for all channels. This adjustment enables the analyzer to perform each measurement without overload and with maximum accuracy.
Sensor Types
The analyzer will accept any vibration signal input (acceleration, velocity, or displacement). The input is then displayed as collected or integrated to another vibration unit. The vibration input will accept any voltage-generating sensor (must have external charge converter when required).
Analysis Range
Data is accurately transformed from the time to frequency domain using a high roll-off, 8-pole elliptical, anti-aliasing filter with a Fast Fourier Transformer (FFT). The analyzer will perform FFT resolutions of 100, 200, 400, and 800 lines.
Also you can check product : NEW ACES System Cobra II 2-Channel Vibration and Balancing Analyzer
Increase your plane or helicopter’s performance today with the ACES Systems ProBalancer Analyzer. For those who need a little more horsepower than the ProBalancer Sport, we offer the Model 2020PL ProBalancer Vibration Analyzer Balancer. It provides step-by-step on-screen instructions for performing propeller balancing, rotor track and balance measurements and vibration surveys at an affordable price.
USED Emerson CSI 2140 Machinery Health Analyzer (CSI 2140)
The Emerson CSI 2140 Machinery Health Analyzer is a 24-bit precision vibration analysis device which allows for accurate measurement of frequency vibrations from 10 Hz to 80 kHz. Technicians can choose from averaging modes like exponential, peak hold, order tracking and more. Emerson CSI 2140 test instruments synthesize data from multiple technologies, including oil analysis, thermography, balancing and vibration into an AMS Suite database, and then combine them with alerts relating to other plant assets for a holistic view of plant health. One, two and four-channel options are available. Four-channel devices collect vertical, horizontal and axial readings via a triaxial accelerometer.
- Easy data collection and powerful analysis tools in a single unit
- Four-channel data collection for faster route completion and advanced diagnostics
- Embedded intelligence guides test set up and data analysis
- Ergonomically designed to improve usability in the field
- Convenient uploading of data wirelessly to AMS Suite from the field
Overview In today’s economy, plants are continually looking for ways to remain competitive in the marketplace. For maintenance departments, this often translates into fewer staff and smaller budgets. In this do-more-with-less environment, maintenance personnel can’t afford to continuously chase the next breakdown. They need to quickly and accurately identify developing faults and determine the root cause of the machinery problem so it can be fixed.
The CSI 2140 is the next generation in a family of industry-leading vibration analyzers and data collectors from Emerson.
As with previous models, the CSI 2140 can provide:
- Route vibration collection
- Advanced vibration analysis
- Cross-channel analysis
- Transient analysis
- Dynamic balancing
- Motor monitoring
- ODS modal analysis
In addition to providing fast, actionable information, an effective solution must take advantage of modern communication and interface innovations that make tasks easier and more intuitive. Emerson’s CSI 2140 Machinery Health Analyzer was designed specifically with these goals in mind.
Wirelessly upload route data and corrective maintenance jobs from the field to AMS Suite: Machinery Health Manager for analysis and reporting. AMS Machinery Manager integrates data from multiple technologies, including vibration, oil analysis, thermography, and balancing into a single database. Alerts generated by AMS Machinery Manager can be exported automatically to AMS Suite: Asset Performance Management where they are combined with alerts from other plant assets to provide a unified view of your plant’s health. Together, the CSI 2140 and AMS Suite deliver the predictive intelligence necessary for increasing availability and reliability in the plant.
More Power That is Easy to Carry into the Field
Route data collection can be a long process – and you need an analyzer that has the battery power to last an entire shift and comfortable enough to carry around all day. The CSI 2140 takes advantage of ergonomic principles and advanced engineering to address these needs. This thinner, lighter analyzer is comfortable to carry on long routes and operate with one hand. The shoulder strap has a large, slip-proof padded area to reduce friction on the neck and back. Connecting the strap is as simple as the push of a button, making it easy to quickly reconfigure for left- or right-hand users.
Visibility in Any Environment. Struggling to see the details of spectrum or waveform data due to sunlight or other lighting conditions is a thing of the past. The CSI 2140’s glove-friendly touch screen features an auto light sensor that adjusts the screen’s backlight to the ambient lighting of the environment for optimal viewing. Visibility is maintained as you move from one area of the plant to another – from direct sunlight to darker interior locations. A backlit keypad allows continued operation of the unit in the darkest environments. In the office, the built-in stand sets the unit at the best angle for viewing data. Charger and communication cables are located at the top of the unit so they do not interfere with the standing position.
Uninterrupted Route Collection. The CSI 2140 has the longest battery life available in the market, which means no more long trips back to the office to dump data or deal with a dead battery. New Lithium-Ion batteries extend battery life and route coverage to a full shift – maybe two – from a single charge. If you do choose to change out the battery, the unit is re-engineered to make the task simple enough to accomplish even in the field. In addition, an external charger allows you to charge a spare battery while you continue to use your analyzer in the field. A car charger option enables you to deliver a charge enroute.
The CSI 2140 uses local hotspot availability to wirelessly transfer data back to the office for quick analysis or from remote locations to a centralized server. Your team can perform route collection and analysis in parallel to maximize your efficiency.
Embedded Intelligence
The ability to perform additional diagnostic tests at the machine site transforms simple data collection into an effective machinery health program. In today’s demanding work environment, it is difficult to find the time to acquire advanced analysis skills. Embedded intelligence, enabled through Analysis Experts, allow even a novice user to conduct sophisticated troubleshooting tests with the touch of a button. Technicians don’t need to remember the complexity of setting up a test they only perform a few times a year – yet they can gain the benefit of its diagnostics when needed. The bottom-line impact is that users can quickly do more in the field with the CSI 2140, avoiding further deterioration of equipment condition.
Building on Field-Proven Technology
Emerson’s next generation vibration analyzer builds on the field-proven, industry-leading technology of its predecessors. The same great capabilities you count on in the CSI 2130 are available in the CSI 2140.
Earliest Detection of Bearing and Gear Wear - Detecting imbalance or misalignment is simple with most data collectors, but these issues are the least impactful of the faults you will find on your equipment. Over 50% of mechanical faults are due to bearing and gearbox issues. And most data collectors do not have the technology to detect these faults as they are developing – and can only find them when the machinery is already damaged and near failure.
The CSI 2140 uses Emerson’s patented PeakVue™ processing and applies digital technology to determine bearing and gear wear earlier than any other technology. By measuring stress waves emitted from impacting – the earliest sign of bearing and gear wear – the CSI 2140 gives you time to plan for maintenance on your machine – while avoiding significant, and costly, damage.
PeakVue technology not only offers the earliest warning of developing faults, it also provides an indication of severity. Measurements can be translated into reliable trends to determine the optimal timing for maintenance. Machinery faults are clearly visible in the waveform, opening up new options for fault detection and diagnosis.
Full Range of Measurement - The CSI 2140 sets the industry bar with its exceptional frequency range. The CSI 2140 can accurately measure signals on critical low speed equipment that would be out of range for other vibration analyzers/ collectors. The CSI 2140 also boasts the highest frequency range in the market. It can measure signals up to 80,000 Hz, critical for accurate diagnosis of centrifugal compressors and other high-speed machinery.
The Emerson CSI 2140 Machinery Health Analyzer is a 24-bit precision vibration analysis device which allows for accurate measurement of frequency vibrations from 10 Hz to 80 kHz. Technicians can choose from averaging modes like exponential, peak hold, order tracking and more. Emerson CSI 2140 test instruments synthesize data from multiple technologies, including oil analysis, thermography, balancing and vibration into an AMS Suite database, and then combine them with alerts relating to other plant assets for a holistic view of plant health. One, two and four-channel options are available. Four-channel devices collect vertical, horizontal and axial readings via a triaxial accelerometer.
- Easy data collection and powerful analysis tools in a single unit
- Four-channel data collection for faster route completion and advanced diagnostics
- Embedded intelligence guides test set up and data analysis
- Ergonomically designed to improve usability in the field
- Convenient uploading of data wirelessly to AMS Suite from the field
Overview In today’s economy, plants are continually looking for ways to remain competitive in the marketplace. For maintenance departments, this often translates into fewer staff and smaller budgets. In this do-more-with-less environment, maintenance personnel can’t afford to continuously chase the next breakdown. They need to quickly and accurately identify developing faults and determine the root cause of the machinery problem so it can be fixed.
The CSI 2140 is the next generation in a family of industry-leading vibration analyzers and data collectors from Emerson.
As with previous models, the CSI 2140 can provide:
- Route vibration collection
- Advanced vibration analysis
- Cross-channel analysis
- Transient analysis
- Dynamic balancing
- Motor monitoring
- ODS modal analysis
In addition to providing fast, actionable information, an effective solution must take advantage of modern communication and interface innovations that make tasks easier and more intuitive. Emerson’s CSI 2140 Machinery Health Analyzer was designed specifically with these goals in mind.
Wirelessly upload route data and corrective maintenance jobs from the field to AMS Suite: Machinery Health Manager for analysis and reporting. AMS Machinery Manager integrates data from multiple technologies, including vibration, oil analysis, thermography, and balancing into a single database. Alerts generated by AMS Machinery Manager can be exported automatically to AMS Suite: Asset Performance Management where they are combined with alerts from other plant assets to provide a unified view of your plant’s health. Together, the CSI 2140 and AMS Suite deliver the predictive intelligence necessary for increasing availability and reliability in the plant.
More Power That is Easy to Carry into the Field
Route data collection can be a long process – and you need an analyzer that has the battery power to last an entire shift and comfortable enough to carry around all day. The CSI 2140 takes advantage of ergonomic principles and advanced engineering to address these needs. This thinner, lighter analyzer is comfortable to carry on long routes and operate with one hand. The shoulder strap has a large, slip-proof padded area to reduce friction on the neck and back. Connecting the strap is as simple as the push of a button, making it easy to quickly reconfigure for left- or right-hand users.
Visibility in Any Environment. Struggling to see the details of spectrum or waveform data due to sunlight or other lighting conditions is a thing of the past. The CSI 2140’s glove-friendly touch screen features an auto light sensor that adjusts the screen’s backlight to the ambient lighting of the environment for optimal viewing. Visibility is maintained as you move from one area of the plant to another – from direct sunlight to darker interior locations. A backlit keypad allows continued operation of the unit in the darkest environments. In the office, the built-in stand sets the unit at the best angle for viewing data. Charger and communication cables are located at the top of the unit so they do not interfere with the standing position.
Uninterrupted Route Collection. The CSI 2140 has the longest battery life available in the market, which means no more long trips back to the office to dump data or deal with a dead battery. New Lithium-Ion batteries extend battery life and route coverage to a full shift – maybe two – from a single charge. If you do choose to change out the battery, the unit is re-engineered to make the task simple enough to accomplish even in the field. In addition, an external charger allows you to charge a spare battery while you continue to use your analyzer in the field. A car charger option enables you to deliver a charge enroute.
The CSI 2140 uses local hotspot availability to wirelessly transfer data back to the office for quick analysis or from remote locations to a centralized server. Your team can perform route collection and analysis in parallel to maximize your efficiency.
Embedded Intelligence
The ability to perform additional diagnostic tests at the machine site transforms simple data collection into an effective machinery health program. In today’s demanding work environment, it is difficult to find the time to acquire advanced analysis skills. Embedded intelligence, enabled through Analysis Experts, allow even a novice user to conduct sophisticated troubleshooting tests with the touch of a button. Technicians don’t need to remember the complexity of setting up a test they only perform a few times a year – yet they can gain the benefit of its diagnostics when needed. The bottom-line impact is that users can quickly do more in the field with the CSI 2140, avoiding further deterioration of equipment condition.
Building on Field-Proven Technology
Emerson’s next generation vibration analyzer builds on the field-proven, industry-leading technology of its predecessors. The same great capabilities you count on in the CSI 2130 are available in the CSI 2140.
Earliest Detection of Bearing and Gear Wear - Detecting imbalance or misalignment is simple with most data collectors, but these issues are the least impactful of the faults you will find on your equipment. Over 50% of mechanical faults are due to bearing and gearbox issues. And most data collectors do not have the technology to detect these faults as they are developing – and can only find them when the machinery is already damaged and near failure.
The CSI 2140 uses Emerson’s patented PeakVue™ processing and applies digital technology to determine bearing and gear wear earlier than any other technology. By measuring stress waves emitted from impacting – the earliest sign of bearing and gear wear – the CSI 2140 gives you time to plan for maintenance on your machine – while avoiding significant, and costly, damage.
PeakVue technology not only offers the earliest warning of developing faults, it also provides an indication of severity. Measurements can be translated into reliable trends to determine the optimal timing for maintenance. Machinery faults are clearly visible in the waveform, opening up new options for fault detection and diagnosis.
Full Range of Measurement - The CSI 2140 sets the industry bar with its exceptional frequency range. The CSI 2140 can accurately measure signals on critical low speed equipment that would be out of range for other vibration analyzers/ collectors. The CSI 2140 also boasts the highest frequency range in the market. It can measure signals up to 80,000 Hz, critical for accurate diagnosis of centrifugal compressors and other high-speed machinery.
Specifications
Hardware Specifications
Physical Dimensions
Dimensions
248 mm (8.8”) high, 40 mm (1.57”) deep, 226 mm (8.9”) wide
Weight
1.79 kg (3.95 lbs)
LCD Display
151 x 115 mm (6” x 4.5”) color TFT w/ LED backlight
Resolution 640 x 480 pixels. Touchscreen - XY resistive
Keypad
Tactile Dome buttons, 12 tactile dome buttons with backlit keys, Electroluminescent panel illumination
Built-in Stand
Environmental
Operating Temperature
-10° to 50°C (-4° to 122°F)
Long-term Storage Temperature
-20° to 35°C (-4° to 95°F) with battery1
Long-term Storage Temperature
-40° to 65°C (-40° to 150°F) without battery
Environmental Rating
Sealed enclosure, IP-65 rated
Battery and Charging
Battery
Type Rechargeable Lithium-Ion battery pack
7.2 Volts (Nominal) Protected Output
On pack LED readout
10 hours of continuous use
4 hours recharge time (Nominal)
Charging temperature 10° to 35°C (50° to 95°F)
Frequency Analysis
A/D Converter
24 bits of precision
Averaging Modes
Normal, exponential, peak hold, order tracking, negative averaging,synchronous time
Cursors Spectrum
Single, Harmonic, Moving Harmonic, Sideband, and Time/Frequency for waveform
Dynamic Range
Converter has 120 dB dynamic range
Frequency Range
DC to 10 Hz minimum, DC to 80 kHz maximum
Frequency Units
Hz, CPM, Orders
Full-scale Range
Accelerometer input: 0-20 V, Volts input -20 V 20 V
Noise Floor
Typically less than 20 μV for a 400-line spectrum at 1,000 Hz maximum frequency
Number of Averages
5,000 in Route mode, 10,000 in Job mode
Resolution
100, 200, 400, 800, 1600, 3200, 6400, or 12800 lines of resolution.
True Zoom provides effective resolution of up to 300,000 lines
Response
Flat to DC for non-integrated and DC-coupled signals; optional AC coupling -3 dB at 1 Hz
Scaling
Linear or Log, both X and Y
Windows
Hanning or uniform
Data Storage Capacity
Internal Memory
1 GB
External Memory
SD (Secure Digital). Virtually unlimited memory with off the shelf SDHC SD cards
up to 32 GB
Data Analysis Speed
400 line, 1000 HZ spectrum
67% overlap 6 avg/sec
1600 line, 1000 Hz spectrum
67% overlap 3 avg/sec
Input Specifications
Input Signals
A 2-milliampere, 20-volt (nominal), constant-current power supply inside the
analyzer powers sensors such as accelerometers connected to the accelerometer
channel inputs.
Full Scale Input Level
Accel Channels A, B, C, D; Volts A, B, C, D
Accelerometer Input
0-20 V
Full scale vibration level is /- 90 g’s when using a 100- mv/g accelerometer
Volts Input
-20 V to 20 V
Input Impedance
Greater than 125K ohms
Input Signal Types
Dynamic Signals
Single channel/Dual channel/Four channel
DC Signals
Single channel/Dual channel/Four channel
RPM/tach Signal
TTL pulse
Keypad Entry
Full alphanumeric capability
Four-Channel Data Collection
Simultaneous four-channels Dynamic Input Phase
Simultaneous four-channels DC Input
Simultaneous four-channel Route collection Phase
Simultaneous four-channel Display - Spectrum and Waveform
Simultaneous four-channel Transient Phase
Simultaneous four-channel ODS/Modal Phase
Simultaneous four-channel Volt/Displacement Phase
(for sleeve bearing monitoring)
Simultaneous Dual Orbits Display [accelerometer/displacement]
(for rolling element/sleeve bearing monitoring)
Simultaneous four-channel Cross Channel Phase
In-field Route Analysis Tools
Fault Frequency Overlays on Plot
Identifies source of vibration peaks
Parameter Trends
Up to 12 parameters trended over 2 years
Colored Alarms
Shows specific parameter in alarm and percentage of alarm value
Waveform Autocorrelation
Identifies whether impacting is periodic or random
Input Sensor Types
Portable Sensors
Accelerometers, velocity probes, RPM/tachometer probes, temperature sensors,
flux coil, current clamp, pressure sensors, triaxial accelerometer, impact hammer
Installed Sensors
Any vibration or dynamic sensor with a voltage output; any DC-type signal
Input Unit Types
Vibration Signals Units Acceleration g’s
Velocity In/sec or mm/sec
Displacement Mils or microns
Other Dynamic Signals Any user-specified unit
DC Signals Any user-specified unit
Tachometer Input
RPM Range 1 to 100,000 RPM
Tach Input Level TTL input, built in conditioning for non-TTL signals, adjustable trigger level.
The tachometer input measures a once-per-rev pulse to measure RPM.
Advanced Acquisitions
PeakVue Selectable filters
Pseudo Tach Generates tach pulses for hidden shafts
Demodulation Selectable filters
Wireless
Bluetooth
2.0 Class 2 (optional) Range up to 10 m
Wireless
802.11 b/g Range up to 33 m
Connecting to a PC
Requirements
Connections/Outpu
USB 2.0, 100 m Ethernet.
Compatible Software
AMS: Machinery Manager v5.6 or greater.
Accuracy – all measurements taken at a temperature of 25°C
For All Dynamic Input Channels
Frequency Accuracy (crystal based
0.02%
Non-Integrated Spectral Amplitude Accuracy
5% over the range of 3 Hz to 65 kHz, 0.001 - 10 Vrms input, with SST on for measurements 3-20 Hz
Single Integrated Spectral Amplitude Accuracy
5% over the range of 10 Hz-20 kHz, 3% over the range of 20 Hz- 20 kHz
DC Accuracy
3% (5 mv) over the input range of 0.1 V to 20 V
Overall Level (W/Averaging, band limited)
5% over the range of 5 Hz - 65 kHz, 0.001 to 10 Vrms
Peak and Phase Measurements
1X Synchronous Peak Accuracy
3% over the range of 3 Hz – 1,500 Hz, 0.01 - 10.0 Vrms
1X Synchronous Phase Accuracy
5 deg over the range of 3 - 1,500 Hz [180- 90,000 RPM]
Tachometer Frequency Accuracy
0.01% ( /-0.1 rpm) over the range of 1-1,600 Hz
AMS 2140 Hazardous Area Certifications1
North America
Certified in the US and Canada to safety standards for
Class I, Division 2 Groups A, B, C, D
Class II, Division 2 Groups F, G
Europe
Certified to the ATEX standards EN 60079-0:2012 & EN 60079-11:2012
II 3 G Ex ic [ic] IIC T4 Gc -20°C ≤ Ta ≤ 50°C
International
Certified to the IECEx standards IEC 60079-0 Edition 6.0 (2014) & IEC 60079-11
Edition 6.0 (2011) Ex ic [ic] IIC T4 Gc -20°C ≤ Ta ≤ 50°C
Also you can check product : NEW Emerson AMS 2140 Machinery Health Analyzer - Vibration data and Analysis
- Easy data collection and powerful analysis tools in a single unit
- Four-channel data collection for faster route completion and advanced diagnostics
- Embedded intelligence guides test set up and data analysis
- Ergonomically designed to improve usability in the field
- Convenient uploading of data wirelessly to AMS Suite from the field
Overview In today’s economy, plants are continually looking for ways to remain competitive in the marketplace. For maintenance departments, this often translates into fewer staff and smaller budgets. In this do-more-with-less environment, maintenance personnel can’t afford to continuously chase the next breakdown. They need to quickly and accurately identify developing faults and determine the root cause of the machinery problem so it can be fixed.
The CSI 2140 is the next generation in a family of industry-leading vibration analyzers and data collectors from Emerson.
As with previous models, the CSI 2140 can provide:
- Route vibration collection
- Advanced vibration analysis
- Cross-channel analysis
- Transient analysis
- Dynamic balancing
- Motor monitoring
- ODS modal analysis
In addition to providing fast, actionable information, an effective solution must take advantage of modern communication and interface innovations that make tasks easier and more intuitive. Emerson’s CSI 2140 Machinery Health Analyzer was designed specifically with these goals in mind.
Wirelessly upload route data and corrective maintenance jobs from the field to AMS Suite: Machinery Health Manager for analysis and reporting. AMS Machinery Manager integrates data from multiple technologies, including vibration, oil analysis, thermography, and balancing into a single database. Alerts generated by AMS Machinery Manager can be exported automatically to AMS Suite: Asset Performance Management where they are combined with alerts from other plant assets to provide a unified view of your plant’s health. Together, the CSI 2140 and AMS Suite deliver the predictive intelligence necessary for increasing availability and reliability in the plant.
More Power That is Easy to Carry into the Field
Route data collection can be a long process – and you need an analyzer that has the battery power to last an entire shift and comfortable enough to carry around all day. The CSI 2140 takes advantage of ergonomic principles and advanced engineering to address these needs. This thinner, lighter analyzer is comfortable to carry on long routes and operate with one hand. The shoulder strap has a large, slip-proof padded area to reduce friction on the neck and back. Connecting the strap is as simple as the push of a button, making it easy to quickly reconfigure for left- or right-hand users.
Visibility in Any Environment. Struggling to see the details of spectrum or waveform data due to sunlight or other lighting conditions is a thing of the past. The CSI 2140’s glove-friendly touch screen features an auto light sensor that adjusts the screen’s backlight to the ambient lighting of the environment for optimal viewing. Visibility is maintained as you move from one area of the plant to another – from direct sunlight to darker interior locations. A backlit keypad allows continued operation of the unit in the darkest environments. In the office, the built-in stand sets the unit at the best angle for viewing data. Charger and communication cables are located at the top of the unit so they do not interfere with the standing position.
Uninterrupted Route Collection. The CSI 2140 has the longest battery life available in the market, which means no more long trips back to the office to dump data or deal with a dead battery. New Lithium-Ion batteries extend battery life and route coverage to a full shift – maybe two – from a single charge. If you do choose to change out the battery, the unit is re-engineered to make the task simple enough to accomplish even in the field. In addition, an external charger allows you to charge a spare battery while you continue to use your analyzer in the field. A car charger option enables you to deliver a charge enroute.
The CSI 2140 uses local hotspot availability to wirelessly transfer data back to the office for quick analysis or from remote locations to a centralized server. Your team can perform route collection and analysis in parallel to maximize your efficiency.
Embedded Intelligence
The ability to perform additional diagnostic tests at the machine site transforms simple data collection into an effective machinery health program. In today’s demanding work environment, it is difficult to find the time to acquire advanced analysis skills. Embedded intelligence, enabled through Analysis Experts, allow even a novice user to conduct sophisticated troubleshooting tests with the touch of a button. Technicians don’t need to remember the complexity of setting up a test they only perform a few times a year – yet they can gain the benefit of its diagnostics when needed. The bottom-line impact is that users can quickly do more in the field with the CSI 2140, avoiding further deterioration of equipment condition.
Building on Field-Proven Technology
Emerson’s next generation vibration analyzer builds on the field-proven, industry-leading technology of its predecessors. The same great capabilities you count on in the CSI 2130 are available in the CSI 2140.
Earliest Detection of Bearing and Gear Wear - Detecting imbalance or misalignment is simple with most data collectors, but these issues are the least impactful of the faults you will find on your equipment. Over 50% of mechanical faults are due to bearing and gearbox issues. And most data collectors do not have the technology to detect these faults as they are developing – and can only find them when the machinery is already damaged and near failure.
The CSI 2140 uses Emerson’s patented PeakVue™ processing and applies digital technology to determine bearing and gear wear earlier than any other technology. By measuring stress waves emitted from impacting – the earliest sign of bearing and gear wear – the CSI 2140 gives you time to plan for maintenance on your machine – while avoiding significant, and costly, damage.
PeakVue technology not only offers the earliest warning of developing faults, it also provides an indication of severity. Measurements can be translated into reliable trends to determine the optimal timing for maintenance. Machinery faults are clearly visible in the waveform, opening up new options for fault detection and diagnosis.
Full Range of Measurement - The CSI 2140 sets the industry bar with its exceptional frequency range. The CSI 2140 can accurately measure signals on critical low speed equipment that would be out of range for other vibration analyzers/ collectors. The CSI 2140 also boasts the highest frequency range in the market. It can measure signals up to 80,000 Hz, critical for accurate diagnosis of centrifugal compressors and other high-speed machinery.
The Emerson CSI 2140 Machinery Health Analyzer is a 24-bit precision vibration analysis device which allows for accurate measurement of frequency vibrations from 10 Hz to 80 kHz. Technicians can choose from averaging modes like exponential, peak hold, order tracking and more. Emerson CSI 2140 test instruments synthesize data from multiple technologies, including oil analysis, thermography, balancing and vibration into an AMS Suite database, and then combine them with alerts relating to other plant assets for a holistic view of plant health. One, two and four-channel options are available. Four-channel devices collect vertical, horizontal and axial readings via a triaxial accelerometer.
- Easy data collection and powerful analysis tools in a single unit
- Four-channel data collection for faster route completion and advanced diagnostics
- Embedded intelligence guides test set up and data analysis
- Ergonomically designed to improve usability in the field
- Convenient uploading of data wirelessly to AMS Suite from the field
Overview In today’s economy, plants are continually looking for ways to remain competitive in the marketplace. For maintenance departments, this often translates into fewer staff and smaller budgets. In this do-more-with-less environment, maintenance personnel can’t afford to continuously chase the next breakdown. They need to quickly and accurately identify developing faults and determine the root cause of the machinery problem so it can be fixed.
The CSI 2140 is the next generation in a family of industry-leading vibration analyzers and data collectors from Emerson.
As with previous models, the CSI 2140 can provide:
- Route vibration collection
- Advanced vibration analysis
- Cross-channel analysis
- Transient analysis
- Dynamic balancing
- Motor monitoring
- ODS modal analysis
In addition to providing fast, actionable information, an effective solution must take advantage of modern communication and interface innovations that make tasks easier and more intuitive. Emerson’s CSI 2140 Machinery Health Analyzer was designed specifically with these goals in mind.
Wirelessly upload route data and corrective maintenance jobs from the field to AMS Suite: Machinery Health Manager for analysis and reporting. AMS Machinery Manager integrates data from multiple technologies, including vibration, oil analysis, thermography, and balancing into a single database. Alerts generated by AMS Machinery Manager can be exported automatically to AMS Suite: Asset Performance Management where they are combined with alerts from other plant assets to provide a unified view of your plant’s health. Together, the CSI 2140 and AMS Suite deliver the predictive intelligence necessary for increasing availability and reliability in the plant.
More Power That is Easy to Carry into the Field
Route data collection can be a long process – and you need an analyzer that has the battery power to last an entire shift and comfortable enough to carry around all day. The CSI 2140 takes advantage of ergonomic principles and advanced engineering to address these needs. This thinner, lighter analyzer is comfortable to carry on long routes and operate with one hand. The shoulder strap has a large, slip-proof padded area to reduce friction on the neck and back. Connecting the strap is as simple as the push of a button, making it easy to quickly reconfigure for left- or right-hand users.
Visibility in Any Environment. Struggling to see the details of spectrum or waveform data due to sunlight or other lighting conditions is a thing of the past. The CSI 2140’s glove-friendly touch screen features an auto light sensor that adjusts the screen’s backlight to the ambient lighting of the environment for optimal viewing. Visibility is maintained as you move from one area of the plant to another – from direct sunlight to darker interior locations. A backlit keypad allows continued operation of the unit in the darkest environments. In the office, the built-in stand sets the unit at the best angle for viewing data. Charger and communication cables are located at the top of the unit so they do not interfere with the standing position.
Uninterrupted Route Collection. The CSI 2140 has the longest battery life available in the market, which means no more long trips back to the office to dump data or deal with a dead battery. New Lithium-Ion batteries extend battery life and route coverage to a full shift – maybe two – from a single charge. If you do choose to change out the battery, the unit is re-engineered to make the task simple enough to accomplish even in the field. In addition, an external charger allows you to charge a spare battery while you continue to use your analyzer in the field. A car charger option enables you to deliver a charge enroute.
The CSI 2140 uses local hotspot availability to wirelessly transfer data back to the office for quick analysis or from remote locations to a centralized server. Your team can perform route collection and analysis in parallel to maximize your efficiency.
Embedded Intelligence
The ability to perform additional diagnostic tests at the machine site transforms simple data collection into an effective machinery health program. In today’s demanding work environment, it is difficult to find the time to acquire advanced analysis skills. Embedded intelligence, enabled through Analysis Experts, allow even a novice user to conduct sophisticated troubleshooting tests with the touch of a button. Technicians don’t need to remember the complexity of setting up a test they only perform a few times a year – yet they can gain the benefit of its diagnostics when needed. The bottom-line impact is that users can quickly do more in the field with the CSI 2140, avoiding further deterioration of equipment condition.
Building on Field-Proven Technology
Emerson’s next generation vibration analyzer builds on the field-proven, industry-leading technology of its predecessors. The same great capabilities you count on in the CSI 2130 are available in the CSI 2140.
Earliest Detection of Bearing and Gear Wear - Detecting imbalance or misalignment is simple with most data collectors, but these issues are the least impactful of the faults you will find on your equipment. Over 50% of mechanical faults are due to bearing and gearbox issues. And most data collectors do not have the technology to detect these faults as they are developing – and can only find them when the machinery is already damaged and near failure.
The CSI 2140 uses Emerson’s patented PeakVue™ processing and applies digital technology to determine bearing and gear wear earlier than any other technology. By measuring stress waves emitted from impacting – the earliest sign of bearing and gear wear – the CSI 2140 gives you time to plan for maintenance on your machine – while avoiding significant, and costly, damage.
PeakVue technology not only offers the earliest warning of developing faults, it also provides an indication of severity. Measurements can be translated into reliable trends to determine the optimal timing for maintenance. Machinery faults are clearly visible in the waveform, opening up new options for fault detection and diagnosis.
Full Range of Measurement - The CSI 2140 sets the industry bar with its exceptional frequency range. The CSI 2140 can accurately measure signals on critical low speed equipment that would be out of range for other vibration analyzers/ collectors. The CSI 2140 also boasts the highest frequency range in the market. It can measure signals up to 80,000 Hz, critical for accurate diagnosis of centrifugal compressors and other high-speed machinery.
Specifications
Hardware Specifications
Physical Dimensions
Dimensions
248 mm (8.8”) high, 40 mm (1.57”) deep, 226 mm (8.9”) wide
Weight
1.79 kg (3.95 lbs)
LCD Display
151 x 115 mm (6” x 4.5”) color TFT w/ LED backlight
Resolution 640 x 480 pixels. Touchscreen - XY resistive
Keypad
Tactile Dome buttons, 12 tactile dome buttons with backlit keys, Electroluminescent panel illumination
Built-in Stand
Environmental
Operating Temperature
-10° to 50°C (-4° to 122°F)
Long-term Storage Temperature
-20° to 35°C (-4° to 95°F) with battery1
Long-term Storage Temperature
-40° to 65°C (-40° to 150°F) without battery
Environmental Rating
Sealed enclosure, IP-65 rated
Battery and Charging
Battery
Type Rechargeable Lithium-Ion battery pack
7.2 Volts (Nominal) Protected Output
On pack LED readout
10 hours of continuous use
4 hours recharge time (Nominal)
Charging temperature 10° to 35°C (50° to 95°F)
Frequency Analysis
A/D Converter
24 bits of precision
Averaging Modes
Normal, exponential, peak hold, order tracking, negative averaging,synchronous time
Cursors Spectrum
Single, Harmonic, Moving Harmonic, Sideband, and Time/Frequency for waveform
Dynamic Range
Converter has 120 dB dynamic range
Frequency Range
DC to 10 Hz minimum, DC to 80 kHz maximum
Frequency Units
Hz, CPM, Orders
Full-scale Range
Accelerometer input: 0-20 V, Volts input -20 V 20 V
Noise Floor
Typically less than 20 μV for a 400-line spectrum at 1,000 Hz maximum frequency
Number of Averages
5,000 in Route mode, 10,000 in Job mode
Resolution
100, 200, 400, 800, 1600, 3200, 6400, or 12800 lines of resolution.
True Zoom provides effective resolution of up to 300,000 lines
Response
Flat to DC for non-integrated and DC-coupled signals; optional AC coupling -3 dB at 1 Hz
Scaling
Linear or Log, both X and Y
Windows
Hanning or uniform
Data Storage Capacity
Internal Memory
1 GB
External Memory
SD (Secure Digital). Virtually unlimited memory with off the shelf SDHC SD cards
up to 32 GB
Data Analysis Speed
400 line, 1000 HZ spectrum
67% overlap 6 avg/sec
1600 line, 1000 Hz spectrum
67% overlap 3 avg/sec
Input Specifications
Input Signals
A 2-milliampere, 20-volt (nominal), constant-current power supply inside the
analyzer powers sensors such as accelerometers connected to the accelerometer
channel inputs.
Full Scale Input Level
Accel Channels A, B, C, D; Volts A, B, C, D
Accelerometer Input
0-20 V
Full scale vibration level is /- 90 g’s when using a 100- mv/g accelerometer
Volts Input
-20 V to 20 V
Input Impedance
Greater than 125K ohms
Input Signal Types
Dynamic Signals
Single channel/Dual channel/Four channel
DC Signals
Single channel/Dual channel/Four channel
RPM/tach Signal
TTL pulse
Keypad Entry
Full alphanumeric capability
Four-Channel Data Collection
Simultaneous four-channels Dynamic Input Phase
Simultaneous four-channels DC Input
Simultaneous four-channel Route collection Phase
Simultaneous four-channel Display - Spectrum and Waveform
Simultaneous four-channel Transient Phase
Simultaneous four-channel ODS/Modal Phase
Simultaneous four-channel Volt/Displacement Phase
(for sleeve bearing monitoring)
Simultaneous Dual Orbits Display [accelerometer/displacement]
(for rolling element/sleeve bearing monitoring)
Simultaneous four-channel Cross Channel Phase
In-field Route Analysis Tools
Fault Frequency Overlays on Plot
Identifies source of vibration peaks
Parameter Trends
Up to 12 parameters trended over 2 years
Colored Alarms
Shows specific parameter in alarm and percentage of alarm value
Waveform Autocorrelation
Identifies whether impacting is periodic or random
Input Sensor Types
Portable Sensors
Accelerometers, velocity probes, RPM/tachometer probes, temperature sensors,
flux coil, current clamp, pressure sensors, triaxial accelerometer, impact hammer
Installed Sensors
Any vibration or dynamic sensor with a voltage output; any DC-type signal
Input Unit Types
Vibration Signals Units Acceleration g’s
Velocity In/sec or mm/sec
Displacement Mils or microns
Other Dynamic Signals Any user-specified unit
DC Signals Any user-specified unit
Tachometer Input
RPM Range 1 to 100,000 RPM
Tach Input Level TTL input, built in conditioning for non-TTL signals, adjustable trigger level.
The tachometer input measures a once-per-rev pulse to measure RPM.
Advanced Acquisitions
PeakVue Selectable filters
Pseudo Tach Generates tach pulses for hidden shafts
Demodulation Selectable filters
Wireless
Bluetooth
2.0 Class 2 (optional) Range up to 10 m
Wireless
802.11 b/g Range up to 33 m
Connecting to a PC
Requirements
Connections/Outpu
USB 2.0, 100 m Ethernet.
Compatible Software
AMS: Machinery Manager v5.6 or greater.
Accuracy – all measurements taken at a temperature of 25°C
For All Dynamic Input Channels
Frequency Accuracy (crystal based
0.02%
Non-Integrated Spectral Amplitude Accuracy
5% over the range of 3 Hz to 65 kHz, 0.001 - 10 Vrms input, with SST on for measurements 3-20 Hz
Single Integrated Spectral Amplitude Accuracy
5% over the range of 10 Hz-20 kHz, 3% over the range of 20 Hz- 20 kHz
DC Accuracy
3% (5 mv) over the input range of 0.1 V to 20 V
Overall Level (W/Averaging, band limited)
5% over the range of 5 Hz - 65 kHz, 0.001 to 10 Vrms
Peak and Phase Measurements
1X Synchronous Peak Accuracy
3% over the range of 3 Hz – 1,500 Hz, 0.01 - 10.0 Vrms
1X Synchronous Phase Accuracy
5 deg over the range of 3 - 1,500 Hz [180- 90,000 RPM]
Tachometer Frequency Accuracy
0.01% ( /-0.1 rpm) over the range of 1-1,600 Hz
AMS 2140 Hazardous Area Certifications1
North America
Certified in the US and Canada to safety standards for
Class I, Division 2 Groups A, B, C, D
Class II, Division 2 Groups F, G
Europe
Certified to the ATEX standards EN 60079-0:2012 & EN 60079-11:2012
II 3 G Ex ic [ic] IIC T4 Gc -20°C ≤ Ta ≤ 50°C
International
Certified to the IECEx standards IEC 60079-0 Edition 6.0 (2014) & IEC 60079-11
Edition 6.0 (2011) Ex ic [ic] IIC T4 Gc -20°C ≤ Ta ≤ 50°C
Also you can check product : NEW Emerson AMS 2140 Machinery Health Analyzer - Vibration data and Analysis
EMERSON CSI 2140 is an electronic test equipment known for its versatility and accuracy when testing a variety of parameters including power quality, energy, and waveforms. This device is made with the latest in cutting-edge technology, so users can expect only the highest levels of accuracy and reliability, along with easy-to-use and easy-to-understand interfaces. Firstly, EMERSON 2140 is an AC/DC 30 MHz signal analyzer that is designed for testing and measuring power quality, energy consumption, and waveforms. It is capable of making calibration-free threshold measurements and frequency response measurements with a 0.1 Hz resolution.
USED Emerson CSI 2130 Machinery Health Analyzer - Dual Channel (CSI 2130)
Easy Operation – minimal training is require for effective operation. The CSI 2130 can distinguish between imbalance ad a bearing fault with the user being instantly notified the faults.
Embedded Intelligene – Emerson developed and patented the ‘Analysis Expert’ as an integral part of the CSI 2130. Embedded diagnostics enable users to conduct sophisticated tests easily.
Bearing & Gear Analysis – the CSI 2130 is armed with PeakVue, which allows for it to detect stress waves. PeakVue offers the earliest warning of developing faults and also indicates severity.
Features:
FAST DATA COLLECTION, REDUCING COLLECTION TIME BY 70% COMPARED TO ITS PREDECESSOR
DUAL-CHANNEL VIBRATION ANALYSIS FOR MORE COMPREHENSIVE MEASUREMENTS
EMBEDDED INTELLIGENCE FOR SOPHISTICATED DIAGNOSTICS AND EASY TESTING
PEAKVUE TECHNOLOGY FOR EARLY DETECTION AND SEVERITY INDICATION OF DEVELOPING FAULTS
MOTOR CURRENT ANALYSIS FOR NON-INTRUSIVE ROTOR AND STATOR CONDITION ANALYSIS
LARGE COLOR DISPLAY FOR CLEAR VISUALIZATION
LIGHTWEIGHT AND PORTABLE DESIGN
IP-65 RATED FOR DUST AND SPLASH WATER RESISTANCE
Full Spectrum of Measurement
Variable Speed Analysis
Add Prediction to Online Monitoring
Monitoring Trouble Spots
Capture Machine Shutdowns
Correlate Vibration & Process Variables
Unsurpassed Versatility
Advanced Cross-Channel Analysis
Transient Analysis – equipped with the Advanced Transient Analysis expands the power of any single or dual channel analyzer to record the raw vibration signal of time for post-processing analysis.
Field Balancing – the CSI 2130 is a power field balancer. The Advanced Balancing application combines technology with simple, straight forward operation for fast, effective solution to any balancing problems.
Laser Alignment – the Advanced Laser Alignment applications offers a graphically driven user interface and wireless operation to quickly and easily complete alignment jobs. The CSI 2130’s laser system uses built-in dual inclinometers to automatically determine the shaft position allowing the other user to rotate the shaft and the solution plotted on the screen.
Motor Current Analysis – the CSI 2130 is equipped with the MotorView module in AMS Machinery Manager, performs non-intrusive analysis of the rotor and stator condition in induction motors.
Industrial Ratings – the Emerson CSI 2130 has received an IP 65 rating certifying the system as dust and splash water tight.
INCLUDED :
1 - EMERSON CSI 2130 HEALTH ANALYZER
1 - POWER CORD
1 - FIRMWARE CD
1 - SHOULDER STRAP
1 - CARRYING CASE
Also you can check product : USED Emerson CSI 2140 Machinery Health Analyzer
Embedded Intelligene – Emerson developed and patented the ‘Analysis Expert’ as an integral part of the CSI 2130. Embedded diagnostics enable users to conduct sophisticated tests easily.
Bearing & Gear Analysis – the CSI 2130 is armed with PeakVue, which allows for it to detect stress waves. PeakVue offers the earliest warning of developing faults and also indicates severity.
Features:
FAST DATA COLLECTION, REDUCING COLLECTION TIME BY 70% COMPARED TO ITS PREDECESSOR
DUAL-CHANNEL VIBRATION ANALYSIS FOR MORE COMPREHENSIVE MEASUREMENTS
EMBEDDED INTELLIGENCE FOR SOPHISTICATED DIAGNOSTICS AND EASY TESTING
PEAKVUE TECHNOLOGY FOR EARLY DETECTION AND SEVERITY INDICATION OF DEVELOPING FAULTS
MOTOR CURRENT ANALYSIS FOR NON-INTRUSIVE ROTOR AND STATOR CONDITION ANALYSIS
LARGE COLOR DISPLAY FOR CLEAR VISUALIZATION
LIGHTWEIGHT AND PORTABLE DESIGN
IP-65 RATED FOR DUST AND SPLASH WATER RESISTANCE
Full Spectrum of Measurement
Variable Speed Analysis
Add Prediction to Online Monitoring
Monitoring Trouble Spots
Capture Machine Shutdowns
Correlate Vibration & Process Variables
Unsurpassed Versatility
Advanced Cross-Channel Analysis
Transient Analysis – equipped with the Advanced Transient Analysis expands the power of any single or dual channel analyzer to record the raw vibration signal of time for post-processing analysis.
Field Balancing – the CSI 2130 is a power field balancer. The Advanced Balancing application combines technology with simple, straight forward operation for fast, effective solution to any balancing problems.
Laser Alignment – the Advanced Laser Alignment applications offers a graphically driven user interface and wireless operation to quickly and easily complete alignment jobs. The CSI 2130’s laser system uses built-in dual inclinometers to automatically determine the shaft position allowing the other user to rotate the shaft and the solution plotted on the screen.
Motor Current Analysis – the CSI 2130 is equipped with the MotorView module in AMS Machinery Manager, performs non-intrusive analysis of the rotor and stator condition in induction motors.
Industrial Ratings – the Emerson CSI 2130 has received an IP 65 rating certifying the system as dust and splash water tight.
INCLUDED :
1 - EMERSON CSI 2130 HEALTH ANALYZER
1 - POWER CORD
1 - FIRMWARE CD
1 - SHOULDER STRAP
1 - CARRYING CASE
Also you can check product : USED Emerson CSI 2140 Machinery Health Analyzer
The Emerson CSI 2130 Machinery Health Analyzer is a highly efficient tool designed to streamline maintenance activities. With its fast data collection, ease of operation, and advanced diagnostics, it provides actionable information to prioritize maintenance tasks effectively. This versatile analyzer is equipped with a range of features, including dual-channel vibration analysis, embedded intelligence, peak detection for bearing and gear analysis, and motor current analysis. It is lightweight, has a large color display, and is IP-65 rated for durability in industrial environments.
NEW Acoem OneProd Falcon Expert Data Collector Vibration Analyzers (Falcon Expert)
ACOEM ONEPROD Falcon Expert Data Collector Vibration Analyzers
Four-Channel Vibration Analyser, Collector, Balancer, Recorder
Main features:
Compact and light case
Single-hand operating (left or right)
Color screen/touch screen
Icon-based intuitive user interface
Online help
Wireless 3-axis sensor
Integrated stroboscope, contactless laser-sighting temperature sensors, no connection of external accessory required.
Automatic identification process of the measurement point by contactless reading of QR-code, preventing sensor positioning errors and reducing measurement time.
Operating comfort and safety are ensured even in the most severe
environments. OneproD Falcon is also suitable for extreme conditions encountered in chemical and petrochemical industry, iron and steel industry, paper industry, cement works, etc.:
IP65 protected
Shock-proof
Intrinsically safe version available (OneproD MVP-2EX)
Based on the latest technology, OneproD Falcon offers added performances, in a more and more compact form:
4 vibration channels 1 trigger input
Frequency range: up to 80 kHz
Resolution: 101 000 lines
Communication via USB, WiFi, Ethernet, Internet
Long-time recording, up to 80 seconds at 51.2 kHz, 4 Msamples
Memory: 4 GB
Automatic configuration
Automatic diagnosis
Multiple functions range from the mere control of vibration levels to the most sophisticated diagnoses:
Data collector MAC (Machine Auto Controller) witch cloud storage, Basic Route or Smart Route
2, 4 plane balancer
Four-channel analyser, future option
Digital recorder, future option
Order analysis, future option
Analyser module with CPB measurement: octave, 1/3rd octave and 1/12th octave, future option
Balancer module:
1 -4 plane balancing
Integrated sensors
OneproD Falcon includes two laser-sighting contactless sensors that allow, without any additional accessories, to complement data collections with temperature (pyrometry) and rotation speed (LED stroboscope) measurements. Since they usually require handling external accessories, these additional measurements are often neglected although they provide a better knowledge of the machines.
Note: Class 2 laser instrument, wavelength: 630-680 nm, max. power: 1 mW according to Standard NF EN 60825-1.
QR-code
Measurement point identification: each bearing (or machine) is equipped with an QR-code and remotely issues its code.You just need to bring OneproD Falcon a few centimetres away from the bearing and press the reading key using the camera. After reading this code, OneproD Falcon automatically sets up the corresponding measurement point and is ready to start data acquisition. This method ensures reliable and faster measurements (no more inversion of the measurement point).
Data Collector
OneproD Falcon is a performing tool to collect data associated with OneproD XPR-300 Predictive Maintenance Software. Three levels of functions are available to meet closely your requirement at the most competitive price.
With its integrated sensors (laser-sighting pyrometer and LED stroboscope, automatic identification of the measurement point), only one cable (that of the vibration transducer) or wireless transducer is required to identify the measurement point and measure the data that are characteristic of the operating state of your machines (vibration, rotation speed, temperature):
Compactness
Speediness
Four channel measurement: faster, orbit analysis
Flash acquisition to speed up data collection
Single-hand measurements (left or right)
Shock-proof, IP65 protection
Organisation of measurements in a 4-level tree system
Automatic sequencing of measurements performed at the same geographic spot
Inspection notes
?Review? function to analyse measurement data directly on the instrument
Off-route measurements: – the level tree structure – copy and paste of machine, point or measurement
Balancer
This optional module is used to correct balancing defects on simple and complex machines.
From 1 to 4 balancing planes
Polar display of measurements
Storage of more than 1000 balancings
One-run balancing capability
Information on the measurement deviation (rotation speed, vibration)
Polar display of trial and correction weights
Splitting of correction weights
Display of balancing quality
Using two-channel/four-channel option, parallel measurements on 2/4 sensors are possible, resulting in a faster, safer and more accurate procedure
Analyser, future option
With this version, measurements and diagnoses can be performed directly on the instrument: overall level control, time and spectrum analysis. The two-channel option offers numerous other functions, such as orbit analysis for journal bearing machines and transfer function for the characterisation of mechanical resonances. Measurement data may be processed on a PC using the vib-Graph software.
Measurement organisation based on a 3-level tree structure Fast generation – using copy/paste functions at all levels.
Functions :
Instantaneous time spectrum
Power autospectrum
RMS spectrum
Cross-spectrum
Transfer function
Transmissibility
Coherence
Display
1, 2, 3, 4 traces
Linear or logarithmic amplitude, phase, real part, imaginary part
Orbit
Shock acquisition
Windowing
Averaging with validation
SPECS :
Touchscreen
Graphic colour touchscreen
Resolution: 800x480 pixels
Dimension: 154x92 mm (D7”)
Adjustable brightness
Can be used in direct sunlight
Icon functions
Touch keyboard
On touchscreen:
- 10 contextual function keys
- Functions are organised for single-hand measurement (left or right)
- Direct access to general functions: Home, Help, Setup, Screen copy, Picture, Bar code reader, Text note, Audio comment,Pyrometer, Stroboscope
- Full keyboard for text input. Several keyboards available: qwerty, azerty, Cyrillic,
Chinese
Acquisition
Synchronous on 4 channels trigger input 4-bits conversion
Sampling frequency:
- 102.4 kHz for each channel
- Up to 204.8 kHz on 1 channel
Antialiasing filter
Wireless acquisition with FALCON WLS triaxial
accelerometer
Digital signal processors
Real-time processing:
- 40 kHz on 4 channels
- Up to 80 kHz on 2 channels
Memory: 3.5 GB for measurements
Communication
USB 2 type B device (direct connection to PC)
USB 2 type A host (for USB stick)
Ethernet
Wi-Fi
Battery
Auto test and calibration function
High density Li-Ion type
Rechargeable without removing
Battery lifetime: 10 hours under intense use
Programmable automatic standby mode and switch-off
Analogue Inputs
Up to 4 programmable signal inputs (depending on instrument option):
- Frequency range: 0 - 40 kHz on 4 channels, 80 kHz on 1 channel
- Overload indicator in % with memorisation
- IEPE interface with real time integrity control, range 8V (power supply: 4 mA constant
current 23 VDC)
- Dynamic signal measurements (acceleration, vibration velocity, absolute displacement, relative displacement, electrical current, etc.)
- /- 10 VAC
- 0, -24 V for proximity probes (a -
24Vdc power supply is available
on each channel using cable ref
FLC1005000))
- Input impedance AC/DC: 100 kΩ
- Accuracy: /- 1%
- Dynamic range > 90dB
- Sensors without electronics with optional charge amplifier
- DC input: from -24 VDC to 24 VDC for measurements of position and process parameters
- AC coupling: 0.3 Hz
- Compatible with triaxial senso
Trigger input:
Range: /- 10 V, 0 to 24 V, 0 to – 24 V
Adjustable triggering parameters
Automatic setup function
For rotation speed measurement, synchronous analysis, balancing, order analysis.
Input impedance: 100 kΩ
5 Vdc power supply for tacho probe
-24 Vdc power supply for proximity probes driver using optional cable ref FLC1006000
Microphone input
Microphone input for audio inspection notes
ANALOGUE OUTPUTS
1 headphone output to listen sensor signal, recorded
signal or audio inspection notes
1 stroboscope output: TTL For each channel and trigger input:
-24 Vdc power supply for proximity probe
BUILT-IN PYROMETER WITH LASER-SIGHTING
Contactless temperature measurement:
- Range: 0 to 200°C
- Accuracy: /- 3°C for ambient temperature
ranging from 18°C to 28°C.
- Resolution: 0.5°C
- Repeatability: /- 1°C
- Field of view: 5° @ 50% ( target ≃ 4 cm @ 50 cm)
- Time response: 1 s
- Fixed emissivity: 95%
BUILT-IN STROBOSCOPE
Rotation speed measurement:
- Range: 30 to 15000 RPM
- Automatic setting to machine speed predefined in setup
- Adjustment:
-½, x2
-Fast
-Fine
- Flash duration : adjustable from 0.5 to 15°
- Can be used independently or to adjust rotation speed in a route or from a spectrumdisplay
Built-in camera
Resolution: 640 x 480
Autofocus
Distance: 20 cm to - Flash mode
Identification of measurement point
Built-in bar code reader
Reading distance: from 20 cm to 50 cm according to
code dimension
Bar code format: QRcode
Learning mode to avoid codes manual input
Mechanical/environment
Protection: IP65.
Case with shock protection rubber
Shock protection: 1.2 m drop (1m for EX version)
Standard compliance:
-Safety: IEC61010-1
-EMC: directive 2004-108-CE
Dimensions: 200 x 265 x 65 mm
Weight: 1.8 kg including battery and rubber protection
Operating temperature: -10°C to 55°C
Humidity: 95% no condensation
FALCON-EX, intrinsically safe version:
ATEX certification: EX II 3 G, Ex ic IIC T4 Gc, supplied
with certified accessories.
IECEX certification: Ex ic IIC T4 Gc
Note: shock protection: 1m drop. The protection screenaccessory cannot be used in dangerous area and is not supplied.
Remote access
FALCON can be set up so as to communicate with your network through its Ethernet or Wi-Fi interface and used as a remote station. You can then use the applications installed on your computer directly from FALCON (SUPERVISION, CMMS…).
Also you can check product : NEW Acoem OneProd Falcon Smart Data Collector Vibration Analyzers
The EXPERT data collector package is especially adapted to all users who have good knowledge of vibration analysis and can provide reliable diagnosis and maintenance recommendation on their own. The EXPERT data collector package will provide them with the most productive tool of the market, thus helping them to drastically save time.
FALCON offers the most efficient solution at each step of the implementation of condition monitoring in your factory. The defects of your rotating machines can thusbe detected several months in advance and the maintenance operations can be scheduled, which avoids unscheduled shutdowns and associated production losses.
NEW Acoem OneProd Falcon Ultimate Data Collector Vibration Analyzers (Falcon Ultimate)
ACOEM ONEPROD Falcon Ultimate Data Collector Vibration Analyzers
Four-Channel Vibration Analyser, Collector, Balancer, Recorder
Main features:
Compact and light case
Single-hand operating (left or right)
Color screen/touch screen
Icon-based intuitive user interface
Online help
Wireless 3-axis sensor
Integrated stroboscope, contactless laser-sighting temperature sensors, no connection of external accessory required.
Automatic identification process of the measurement point by contactless reading of QR-code, preventing sensor positioning errors and reducing measurement time.
Operating comfort and safety are ensured even in the most severe
environments. OneproD Falcon is also suitable for extreme conditions encountered in chemical and petrochemical industry, iron and steel industry, paper industry, cement works, etc.:
IP65 protected
Shock-proof
Intrinsically safe version available (OneproD MVP-2EX)
Based on the latest technology, OneproD Falcon offers added performances, in a more and more compact form:
4 vibration channels 1 trigger input
Frequency range: up to 80 kHz
Resolution: 101 000 lines
Communication via USB, WiFi, Ethernet, Internet
Long-time recording, up to 80 seconds at 51.2 kHz, 4 Msamples
Memory: 4 GB
Automatic configuration
Automatic diagnosis
Multiple functions range from the mere control of vibration levels to the most sophisticated diagnoses:
Data collector MAC (Machine Auto Controller) witch cloud storage, Basic Route or Smart Route
2, 4 plane balancer
Four-channel analyser, future option
Digital recorder, future option
Order analysis, future option
Analyser module with CPB measurement: octave, 1/3rd octave and 1/12th octave, future option
Balancer module:
1 -4 plane balancing
Integrated sensors
OneproD Falcon includes two laser-sighting contactless sensors that allow, without any additional accessories, to complement data collections with temperature (pyrometry) and rotation speed (LED stroboscope) measurements. Since they usually require handling external accessories, these additional measurements are often neglected although they provide a better knowledge of the machines.
Note: Class 2 laser instrument, wavelength: 630-680 nm, max. power: 1 mW according to Standard NF EN 60825-1.
QR-code
Measurement point identification: each bearing (or machine) is equipped with an QR-code and remotely issues its code.You just need to bring OneproD Falcon a few centimetres away from the bearing and press the reading key using the camera. After reading this code, OneproD Falcon automatically sets up the corresponding measurement point and is ready to start data acquisition. This method ensures reliable and faster measurements (no more inversion of the measurement point).
Data Collector
OneproD Falcon is a performing tool to collect data associated with OneproD XPR-300 Predictive Maintenance Software. Three levels of functions are available to meet closely your requirement at the most competitive price.
With its integrated sensors (laser-sighting pyrometer and LED stroboscope, automatic identification of the measurement point), only one cable (that of the vibration transducer) or wireless transducer is required to identify the measurement point and measure the data that are characteristic of the operating state of your machines (vibration, rotation speed, temperature):
Compactness
Speediness
Four channel measurement: faster, orbit analysis
Flash acquisition to speed up data collection
Single-hand measurements (left or right)
Shock-proof, IP65 protection
Organisation of measurements in a 4-level tree system
Automatic sequencing of measurements performed at the same geographic spot
Inspection notes
?Review? function to analyse measurement data directly on the instrument
Off-route measurements: – the level tree structure – copy and paste of machine, point or measurement
Balancer
This optional module is used to correct balancing defects on simple and complex machines.
From 1 to 4 balancing planes
Polar display of measurements
Storage of more than 1000 balancings
One-run balancing capability
Information on the measurement deviation (rotation speed, vibration)
Polar display of trial and correction weights
Splitting of correction weights
Display of balancing quality
Using two-channel/four-channel option, parallel measurements on 2/4 sensors are possible, resulting in a faster, safer and more accurate procedure
Analyser, future option
With this version, measurements and diagnoses can be performed directly on the instrument: overall level control, time and spectrum analysis. The two-channel option offers numerous other functions, such as orbit analysis for journal bearing machines and transfer function for the characterisation of mechanical resonances. Measurement data may be processed on a PC using the vib-Graph software.
Measurement organisation based on a 3-level tree structure Fast generation – using copy/paste functions at all levels.
Functions :
Instantaneous time spectrum
Power autospectrum
RMS spectrum
Cross-spectrum
Transfer function
Transmissibility
Coherence
Display
1, 2, 3, 4 traces
Linear or logarithmic amplitude, phase, real part, imaginary part
Orbit
Shock acquisition
Windowing
Averaging with validation
SPECS :
Touchscreen
Graphic colour touchscreen
Resolution: 800x480 pixels
Dimension: 154x92 mm (D7”)
Adjustable brightness
Can be used in direct sunlight
Icon functions
Touch keyboard
On touchscreen:
- 10 contextual function keys
- Functions are organised for single-hand measurement (left or right)
- Direct access to general functions: Home, Help, Setup, Screen copy, Picture, Bar code reader, Text note, Audio comment,Pyrometer, Stroboscope
- Full keyboard for text input. Several keyboards available: qwerty, azerty, Cyrillic,
Chinese
Acquisition
Synchronous on 4 channels trigger input 4-bits conversion
Sampling frequency:
- 102.4 kHz for each channel
- Up to 204.8 kHz on 1 channel
Antialiasing filter
Wireless acquisition with FALCON WLS triaxial
accelerometer
Digital signal processors
Real-time processing:
- 40 kHz on 4 channels
- Up to 80 kHz on 2 channels
Memory: 3.5 GB for measurements
Communication
USB 2 type B device (direct connection to PC)
USB 2 type A host (for USB stick)
Ethernet
Wi-Fi
Battery
Auto test and calibration function
High density Li-Ion type
Rechargeable without removing
Battery lifetime: 10 hours under intense use
Programmable automatic standby mode and switch-off
Analogue Inputs
Up to 4 programmable signal inputs (depending on instrument option):
- Frequency range: 0 - 40 kHz on 4 channels, 80 kHz on 1 channel
- Overload indicator in % with memorisation
- IEPE interface with real time integrity control, range 8V (power supply: 4 mA constant
current 23 VDC)
- Dynamic signal measurements (acceleration, vibration velocity, absolute displacement, relative displacement, electrical current, etc.)
- /- 10 VAC
- 0, -24 V for proximity probes (a -
24Vdc power supply is available
on each channel using cable ref
FLC1005000))
- Input impedance AC/DC: 100 kΩ
- Accuracy: /- 1%
- Dynamic range > 90dB
- Sensors without electronics with optional charge amplifier
- DC input: from -24 VDC to 24 VDC for measurements of position and process parameters
- AC coupling: 0.3 Hz
- Compatible with triaxial senso
Trigger input:
Range: /- 10 V, 0 to 24 V, 0 to – 24 V
Adjustable triggering parameters
Automatic setup function
For rotation speed measurement, synchronous analysis, balancing, order analysis.
Input impedance: 100 kΩ
5 Vdc power supply for tacho probe
-24 Vdc power supply for proximity probes driver using optional cable ref FLC1006000
Microphone input
Microphone input for audio inspection notes
ANALOGUE OUTPUTS
1 headphone output to listen sensor signal, recorded
signal or audio inspection notes
1 stroboscope output: TTL For each channel and trigger input:
-24 Vdc power supply for proximity probe
BUILT-IN PYROMETER WITH LASER-SIGHTING
Contactless temperature measurement:
- Range: 0 to 200°C
- Accuracy: /- 3°C for ambient temperature
ranging from 18°C to 28°C.
- Resolution: 0.5°C
- Repeatability: /- 1°C
- Field of view: 5° @ 50% ( target ≃ 4 cm @ 50 cm)
- Time response: 1 s
- Fixed emissivity: 95%
BUILT-IN STROBOSCOPE
Rotation speed measurement:
- Range: 30 to 15000 RPM
- Automatic setting to machine speed predefined in setup
- Adjustment:
-½, x2
-Fast
-Fine
- Flash duration : adjustable from 0.5 to 15°
- Can be used independently or to adjust rotation speed in a route or from a spectrumdisplay
Built-in camera
Resolution: 640 x 480
Autofocus
Distance: 20 cm to - Flash mode
Identification of measurement point
Built-in bar code reader
Reading distance: from 20 cm to 50 cm according to
code dimension
Bar code format: QRcode
Learning mode to avoid codes manual input
Mechanical/environment
Protection: IP65.
Case with shock protection rubber
Shock protection: 1.2 m drop (1m for EX version)
Standard compliance:
-Safety: IEC61010-1
-EMC: directive 2004-108-CE
Dimensions: 200 x 265 x 65 mm
Weight: 1.8 kg including battery and rubber protection
Operating temperature: -10°C to 55°C
Humidity: 95% no condensation
FALCON-EX, intrinsically safe version:
ATEX certification: EX II 3 G, Ex ic IIC T4 Gc, supplied
with certified accessories.
IECEX certification: Ex ic IIC T4 Gc
Note: shock protection: 1m drop. The protection screenaccessory cannot be used in dangerous area and is not supplied.
Remote access
FALCON can be set up so as to communicate with your network through its Ethernet or Wi-Fi interface and used as a remote station. You can then use the applications installed on your computer directly from FALCON (SUPERVISION, CMMS…)
Also you can check product : NEW Acoem OneProd Falcon Expert Data Collector Vibration Analyzers
The ULTIMATE package correspond to a full option FALCON with Expert data collection capabilities and all optional modules activated, coming at a very attractive price.
FALCON offers the most efficient solution at each step of the implementation of condition monitoring in
your factory. The defects of your rotating machines can thus be detected several months in advance and the maintenance operations can be scheduled, which avoids unscheduled shutdowns and associated production losses.
NEW Acoem OneProd Falcon Smart Data Collector Vibration Analyzers (Falcon Smart)
ACOEM ONEPROD Falcon Smart Data Collector Vibration Analyzers
Four-Channel Vibration Analyser, Collector, Balancer, Recorder
Main features:
Compact and light case
Single-hand operating (left or right)
Color screen/touch screen
Icon-based intuitive user interface
Online help
Wireless 3-axis sensor
Integrated stroboscope, contactless laser-sighting temperature sensors, no connection of external accessory required.
Automatic identification process of the measurement point by contactless reading of QR-code, preventing sensor positioning errors and reducing measurement time.
Operating comfort and safety are ensured even in the most severe
environments. OneproD Falcon is also suitable for extreme conditions encountered in chemical and petrochemical industry, iron and steel industry, paper industry, cement works, etc.:
IP65 protected
Shock-proof
Intrinsically safe version available (OneproD MVP-2EX)
Based on the latest technology, OneproD Falcon offers added performances, in a more and more compact form:
4 vibration channels 1 trigger input
Frequency range: up to 80 kHz
Resolution: 101 000 lines
Communication via USB, WiFi, Ethernet, Internet
Long-time recording, up to 80 seconds at 51.2 kHz, 4 Msamples
Memory: 4 GB
Automatic configuration
Automatic diagnosis
Multiple functions range from the mere control of vibration levels to the most sophisticated diagnoses:
Data collector MAC (Machine Auto Controller) witch cloud storage, Basic Route or Smart Route
2, 4 plane balancer
Four-channel analyser, future option
Digital recorder, future option
Order analysis, future option
Analyser module with CPB measurement: octave, 1/3rd octave and 1/12th octave, future option
Balancer module:
1 -4 plane balancing
Integrated sensors
OneproD Falcon includes two laser-sighting contactless sensors that allow, without any additional accessories, to complement data collections with temperature (pyrometry) and rotation speed (LED stroboscope) measurements. Since they usually require handling external accessories, these additional measurements are often neglected although they provide a better knowledge of the machines.
Note: Class 2 laser instrument, wavelength: 630-680 nm, max. power: 1 mW according to Standard NF EN 60825-1.
QR-code
Measurement point identification: each bearing (or machine) is equipped with an QR-code and remotely issues its code.You just need to bring OneproD Falcon a few centimetres away from the bearing and press the reading key using the camera. After reading this code, OneproD Falcon automatically sets up the corresponding measurement point and is ready to start data acquisition. This method ensures reliable and faster measurements (no more inversion of the measurement point).
Data Collector
OneproD Falcon is a performing tool to collect data associated with OneproD XPR-300 Predictive Maintenance Software. Three levels of functions are available to meet closely your requirement at the most competitive price.
With its integrated sensors (laser-sighting pyrometer and LED stroboscope, automatic identification of the measurement point), only one cable (that of the vibration transducer) or wireless transducer is required to identify the measurement point and measure the data that are characteristic of the operating state of your machines (vibration, rotation speed, temperature):
Compactness
Speediness
Four channel measurement: faster, orbit analysis
Flash acquisition to speed up data collection
Single-hand measurements (left or right)
Shock-proof, IP65 protection
Organisation of measurements in a 4-level tree system
Automatic sequencing of measurements performed at the same geographic spot
Inspection notes
?Review? function to analyse measurement data directly on the instrument
Off-route measurements: – the level tree structure – copy and paste of machine, point or measurement
Balancer
This optional module is used to correct balancing defects on simple and complex machines.
From 1 to 4 balancing planes
Polar display of measurements
Storage of more than 1000 balancings
One-run balancing capability
Information on the measurement deviation (rotation speed, vibration)
Polar display of trial and correction weights
Splitting of correction weights
Display of balancing quality
Using two-channel/four-channel option, parallel measurements on 2/4 sensors are possible, resulting in a faster, safer and more accurate procedure
Analyser, future option
With this version, measurements and diagnoses can be performed directly on the instrument: overall level control, time and spectrum analysis. The two-channel option offers numerous other functions, such as orbit analysis for journal bearing machines and transfer function for the characterisation of mechanical resonances. Measurement data may be processed on a PC using the vib-Graph software.
Measurement organisation based on a 3-level tree structure Fast generation – using copy/paste functions at all levels.
Functions :
Instantaneous time spectrum
Power autospectrum
RMS spectrum
Cross-spectrum
Transfer function
Transmissibility
Coherence
Display
1, 2, 3, 4 traces
Linear or logarithmic amplitude, phase, real part, imaginary part
Orbit
Shock acquisition
Windowing
Averaging with validation
SPECS :
Touchscreen
Graphic colour touchscreen
Resolution: 800x480 pixels
Dimension: 154x92 mm (D7”)
Adjustable brightness
Can be used in direct sunlight
Icon functions
Touch keyboard
On touchscreen:
- 10 contextual function keys
- Functions are organised for single-hand measurement (left or right)
- Direct access to general functions: Home, Help, Setup, Screen copy, Picture, Bar code reader, Text note, Audio comment,Pyrometer, Stroboscope
- Full keyboard for text input. Several keyboards available: qwerty, azerty, Cyrillic,
Chinese
Acquisition
Synchronous on 4 channels trigger input 4-bits conversion
Sampling frequency:
- 102.4 kHz for each channel
- Up to 204.8 kHz on 1 channel
Antialiasing filter
Wireless acquisition with FALCON WLS triaxial
accelerometer
Digital signal processors
Real-time processing:
- 40 kHz on 4 channels
- Up to 80 kHz on 2 channels
Memory: 3.5 GB for measurements
Communication
USB 2 type B device (direct connection to PC)
USB 2 type A host (for USB stick)
Ethernet
Wi-Fi
Battery
Auto test and calibration function
High density Li-Ion type
Rechargeable without removing
Battery lifetime: 10 hours under intense use
Programmable automatic standby mode and switch-off
Analogue Inputs
Up to 4 programmable signal inputs (depending on instrument option):
- Frequency range: 0 - 40 kHz on 4 channels, 80 kHz on 1 channel
- Overload indicator in % with memorisation
- IEPE interface with real time integrity control, range 8V (power supply: 4 mA constant
current 23 VDC)
- Dynamic signal measurements (acceleration, vibration velocity, absolute displacement, relative displacement, electrical current, etc.)
- /- 10 VAC
- 0, -24 V for proximity probes (a -
24Vdc power supply is available
on each channel using cable ref
FLC1005000))
- Input impedance AC/DC: 100 kΩ
- Accuracy: /- 1%
- Dynamic range > 90dB
- Sensors without electronics with optional charge amplifier
- DC input: from -24 VDC to 24 VDC for measurements of position and process parameters
- AC coupling: 0.3 Hz
- Compatible with triaxial senso
Trigger input:
Range: /- 10 V, 0 to 24 V, 0 to – 24 V
Adjustable triggering parameters
Automatic setup function
For rotation speed measurement, synchronous analysis, balancing, order analysis.
Input impedance: 100 kΩ
5 Vdc power supply for tacho probe
-24 Vdc power supply for proximity probes driver using optional cable ref FLC1006000
Microphone input
Microphone input for audio inspection notes
ANALOGUE OUTPUTS
1 headphone output to listen sensor signal, recorded
signal or audio inspection notes
1 stroboscope output: TTL For each channel and trigger input:
-24 Vdc power supply for proximity probe
BUILT-IN PYROMETER WITH LASER-SIGHTING
Contactless temperature measurement:
- Range: 0 to 200°C
- Accuracy: /- 3°C for ambient temperature
ranging from 18°C to 28°C.
- Resolution: 0.5°C
- Repeatability: /- 1°C
- Field of view: 5° @ 50% ( target ≃ 4 cm @ 50 cm)
- Time response: 1 s
- Fixed emissivity: 95%
BUILT-IN STROBOSCOPE
Rotation speed measurement:
- Range: 30 to 15000 RPM
- Automatic setting to machine speed predefined in setup
- Adjustment:
-½, x2
-Fast
-Fine
- Flash duration : adjustable from 0.5 to 15°
- Can be used independently or to adjust rotation speed in a route or from a spectrumdisplay
Built-in camera
Resolution: 640 x 480
Autofocus
Distance: 20 cm to - Flash mode
Identification of measurement point
Built-in bar code reader
Reading distance: from 20 cm to 50 cm according to
code dimension
Bar code format: QRcode
Learning mode to avoid codes manual input
Mechanical/environment
Protection: IP65.
Case with shock protection rubber
Shock protection: 1.2 m drop (1m for EX version)
Standard compliance:
-Safety: IEC61010-1
-EMC: directive 2004-108-CE
Dimensions: 200 x 265 x 65 mm
Weight: 1.8 kg including battery and rubber protection
Operating temperature: -10°C to 55°C
Humidity: 95% no condensation
FALCON-EX, intrinsically safe version:
ATEX certification: EX II 3 G, Ex ic IIC T4 Gc, supplied
with certified accessories.
IECEX certification: Ex ic IIC T4 Gc
Note: shock protection: 1m drop. The protection screenaccessory cannot be used in dangerous area and is not supplied.
Remote access
FALCON can be set up so as to communicate with your network through its Ethernet or Wi-Fi interface and used as a remote station. You can then use the applications installed on your computer directly from FALCON (SUPERVISION, CMMS…).
Also you can check product : NEW Acoem OneProd Falcon Expert Data Collector Vibration Analyzers
The result of 30 years of experience in condition monitoring of rotating machines. FALCON is an innovative vibration measurement and analysis tool that makes condition-based maintenance available to all users. Three-axis wireless sensor, taking simultaneous vibration measurements in all directions, built-in strobe light for rotation speed measurement, built in laser pyrometer for bearing temperature measurement built in camera for easy machine identification, sensor positioning, and report illustration
embedded Accurex™ automatic diagnostic , 4 analog channels for synchronous measurement, in addition to the trigger input.
NEW Benstone Instruments impaq Plus 4 Vibration Analyzer and Sound (impaq Plus)
Born for advanced field testing
Impaq Plus is a fully rugged portable 4 channel real-time analyzer built for advanced noise and vibration measurements in the field. Manufactured with a rugged enclosure by a dual injection molding process and protective sealing to provide an IP 65 rating for measurement in harsh environments. Equipped with a large 10.1” multi-touch color display, information is not only on display, but a more intuitive user interface with keypads on the left side. Impaq Plus acquires measurement signal with precision 24 bit sigma delta AD converters to provide a high dynamic range and a up to 40 kHz maximum bandwidth.
With optional software modules, the impaq Plus can conduct FFT spectrum analysis, Order Tracking Analysis and Octave spectrum analysis at the same time. Besides, it can be used as a digital signal recorder for continuous raw data recording and playback analysis. The optional balancing module supports all kinds of field balancing tasks with all the most advanced features.
Multiple Analysis
impaq Plus supports multiple analysis which allows you to run different analysis modules, such
as FFT analysis, Octave spectrum, order tracking analysis and raw data recording, at the same time.
Modular Software
The impaq Plus’s modular software allows for the proper configuration of your analyzer. Optional modules available are raw data recorder, FFT spectrum analysis, 1/3 Octave spectrum analysis, computed order tracking analysis and Rotor balancing.
Raw Data Recorder
The Raw Data Recorder software module allows the user to measure analog signals in the Recorder mode or Real-time Recorder mode and store the raw data signal directly to the hard drive or memory. Replay the stored raw signal in the playback mode with selected analysis modules as if the signal is from a real-time acquisition.
FFT Spectrum Analysis module
The FFT (Fourier Transform) spectrum analysis provides up to 14 different measurement functions for your sound and vibration needs. Continuous start-up/ coast-down spectrum and display the results on a 3D waterfall/ intensity plot. Perform modal, ODS, envelope testing and more.
General sound & vibration analysis
Modal testing and ODS measurement
Sound intensity measurement
Sound and vibration quality measurement
Stiffness measurement
Bearing diagnosis (envelope spectrum and waveform)
Variable speed machine measurement
Octave spectrum analysis module
The octave spectrum analysis utilizes parallel time domain filters to generate octave, 1/3 octave or 1/12 octave spectrum. Conforming to IEC 61260 and IEC 61672 standards, this module is suitable for evaluating the sound or vibration severity. Built-in user defined weighting functions supports specific measurements such as: ISO 6954 (vibration on ships), ISO 8041 and ISO 2631 (human vibration) to name a few. Many high-tech factories are concerned about floor vibration. User defined VC curves can be displayed on the Octave spectrum plot to determine the level of vibration.
Computed Order Tracking module
The computed order tracking program is designed to measure sound and vibration on varying speed machines. A digital re-sampling algorithm is used to make the spectral resolutions be the same at different rotation speeds. Typical applications for this software module are NVH (Noise, Vibration, Harshness) testing of vehicles or advanced vibration analysis of turbine machines. Order spectrum, order traces, filtered or unfiltered orbits, gap reading, and centerline of a shaft are accurately measured and displayed during a start-up or coast-down process. The user can input geometric position(s) of the vibration sensors to display orbit and shaft centerline motion, which relates to the
realistic behavior of a turbine machine.
Rotor Balancing module
The Impaq Plus’s rotor balancing package can balance your rotating machines in the field with industry leading balancing techniques like; single plane, dual plane, overhung dual plane, 3 plane, 4 plane and 3 weights balancing. This advanced balancing software makes it very simple to balance machines in-field with a very high level of accuracy. Now with multiple-point balancing, vibration in both horizontal and vertical directions are minimized at the same time. By enabling coast-down measurements for 1X vibration, the heavy spot is identified correctly with only one measurement, saving you time, money and
increasing safety. This technique prevents the user from danger by putting the trial weights in the wrong place and shortens the time required to balance. Other features / functions are:
Multi-point balancing
Component calculation
Drill depth calculation
Allowable residual unbalance calculated from the ISO 1940 standard
Unequal radii calculation
Decoupled balancing (couple static)
Review historical vibration data on a polar plot.
Review historical balancing data on a polar plot
Heavy spot estimation with one shot measurement.
Redo a previous balancing job with saved balancing factors.
SPECS :
Operating system
Windows 10 IoT enterprise
Input channels
4 analog channels and 1 tacho channel
Connector
Channel 1 ~ channel 4: BNC. Tri-axial: Fischer Core Series 103*, 6 pins
Tacho input: Fischer Core Series 103*, 7 pins. USB: USB 3.1, Type-A connector
Channel coupling
AC, DC, IEPE
Tacho input
TTL signal, with built-in power supply
CPU
Intel Atom® Processor N4200
Internal memory
256G SSD
Battery
14.4V, 2270mAh, 32.7W* (x2, swappable)
Interface
USB 3.1 type A connector x1
LCD display
1280x800 10.1” multi-touch color screen
Operating temperature
-10 deg C to 50 deg C
Product approvals
CE, RoHs, REACH, China RoHs,
Regulatory Compliance Mark (RCM), UKCA, FCC, KC
Drop test
1.2 meters - MIL-STD 810H
Vibration test
MIL STD 810 transportation
Sealing / Ruggedness
EN60529 IP65
Housing material
Dual material mold injection
Weight
1.9 kg with dual batteries, 1.72 kg with single battery
Size
300 x 195 x 50 mm
Input signal range
± 5Volt, ± 20Volt
A/D converter
24-bit sigma-delta A/D converter
Frequency range
0 Hz~40 kHz (102.4 kHz Max sampling rate)
Feature for Raw Data Recorder
Recorded data
Raw time data and TTL tacho signal
Monitor display
Recorder mode: Waveform, continuous waveform or spectrum
Real-time recorder mode: same as real-time measurement setting.
Storage media
Internal 256G SSD
Data review
Replay data in Playback mode
Maximum bandwidth
40 kHz with 4 channels on, plus tacho channel
Maximum length of recording
limited by memory space
Recording stop
by time, rpm, file size or manual
Feature for FFT Analysis
FFT real time rate
40 kHz with 4 channels on
FFT resolution
100-51,200 lines
Spectral map
3D waterfall or intensity plots for continuous spectrum measurements
Time windows
Hanning, hamming, flattop, rectangular, force, exponential Bartlett, Blackman, Kaiser
Analysis functions
Complex spectrum, power spectrum, cross power spectrum, FRF, time waveform, envelope waveform, envelope spectrum, coherence, PSD, Cepstrum, overall level, mean trend, rate trend, rotation speed.
Engineering units
Automatic units transform with pre-defined conversion table
Zoom FFT
Yes
Average
Off, Linear, exponential, time, peak hold
Trigger
On/Off, triggering source, pre/ post triggering, triggering slope and
triggering level
Map functions
Time waveform, complex spectrum, auto spectrum, cross spectrum
Control of Map measurement
Free run, by total count, total time, armed by time step or RPM step
Cursor
Single, harmonic, dual, side band, peak cursor, cursor marker
Envelope filters
500~2kHz, 1k~2.5kHz, 2k~5kHz, 5k~10kHz or user defined.
2D Plot format
Linear, Polar, Bode, Real Imaginery, Nyquist, Accelerance/Mobility/Compliance
3D Plot format
Waterfall, intensity map, overlapped
Mathematic operation
Unit conversion, FFT, iFFT, integration, differentiation, band pass filter,
high pass filter, low pass filter, band notch filter, scaling, weighting,
window, reciprocal, detrend, redo, undo.
Also you can check product : NEW Benstone Instruments fieldpaq II Portable Sound & Vibration Analyzers
Impaq Plus is a fully rugged portable 4 channel real-time analyzer built for advanced noise and vibration measurements in the field. Manufactured with a rugged enclosure by a dual injection molding process and protective sealing to provide an IP 65 rating for measurement in harsh environments. Equipped with a large 10.1” multi-touch color display, information is not only on display, but a more intuitive user interface with keypads on the left side. Impaq Plus acquires measurement signal with precision 24 bit sigma delta AD converters to provide a high dynamic range and a up to 40 kHz maximum bandwidth.
With optional software modules, the impaq Plus can conduct FFT spectrum analysis, Order Tracking Analysis and Octave spectrum analysis at the same time. Besides, it can be used as a digital signal recorder for continuous raw data recording and playback analysis. The optional balancing module supports all kinds of field balancing tasks with all the most advanced features.
Multiple Analysis
impaq Plus supports multiple analysis which allows you to run different analysis modules, such
as FFT analysis, Octave spectrum, order tracking analysis and raw data recording, at the same time.
Modular Software
The impaq Plus’s modular software allows for the proper configuration of your analyzer. Optional modules available are raw data recorder, FFT spectrum analysis, 1/3 Octave spectrum analysis, computed order tracking analysis and Rotor balancing.
Raw Data Recorder
The Raw Data Recorder software module allows the user to measure analog signals in the Recorder mode or Real-time Recorder mode and store the raw data signal directly to the hard drive or memory. Replay the stored raw signal in the playback mode with selected analysis modules as if the signal is from a real-time acquisition.
FFT Spectrum Analysis module
The FFT (Fourier Transform) spectrum analysis provides up to 14 different measurement functions for your sound and vibration needs. Continuous start-up/ coast-down spectrum and display the results on a 3D waterfall/ intensity plot. Perform modal, ODS, envelope testing and more.
General sound & vibration analysis
Modal testing and ODS measurement
Sound intensity measurement
Sound and vibration quality measurement
Stiffness measurement
Bearing diagnosis (envelope spectrum and waveform)
Variable speed machine measurement
Octave spectrum analysis module
The octave spectrum analysis utilizes parallel time domain filters to generate octave, 1/3 octave or 1/12 octave spectrum. Conforming to IEC 61260 and IEC 61672 standards, this module is suitable for evaluating the sound or vibration severity. Built-in user defined weighting functions supports specific measurements such as: ISO 6954 (vibration on ships), ISO 8041 and ISO 2631 (human vibration) to name a few. Many high-tech factories are concerned about floor vibration. User defined VC curves can be displayed on the Octave spectrum plot to determine the level of vibration.
Computed Order Tracking module
The computed order tracking program is designed to measure sound and vibration on varying speed machines. A digital re-sampling algorithm is used to make the spectral resolutions be the same at different rotation speeds. Typical applications for this software module are NVH (Noise, Vibration, Harshness) testing of vehicles or advanced vibration analysis of turbine machines. Order spectrum, order traces, filtered or unfiltered orbits, gap reading, and centerline of a shaft are accurately measured and displayed during a start-up or coast-down process. The user can input geometric position(s) of the vibration sensors to display orbit and shaft centerline motion, which relates to the
realistic behavior of a turbine machine.
Rotor Balancing module
The Impaq Plus’s rotor balancing package can balance your rotating machines in the field with industry leading balancing techniques like; single plane, dual plane, overhung dual plane, 3 plane, 4 plane and 3 weights balancing. This advanced balancing software makes it very simple to balance machines in-field with a very high level of accuracy. Now with multiple-point balancing, vibration in both horizontal and vertical directions are minimized at the same time. By enabling coast-down measurements for 1X vibration, the heavy spot is identified correctly with only one measurement, saving you time, money and
increasing safety. This technique prevents the user from danger by putting the trial weights in the wrong place and shortens the time required to balance. Other features / functions are:
Multi-point balancing
Component calculation
Drill depth calculation
Allowable residual unbalance calculated from the ISO 1940 standard
Unequal radii calculation
Decoupled balancing (couple static)
Review historical vibration data on a polar plot.
Review historical balancing data on a polar plot
Heavy spot estimation with one shot measurement.
Redo a previous balancing job with saved balancing factors.
SPECS :
Operating system
Windows 10 IoT enterprise
Input channels
4 analog channels and 1 tacho channel
Connector
Channel 1 ~ channel 4: BNC. Tri-axial: Fischer Core Series 103*, 6 pins
Tacho input: Fischer Core Series 103*, 7 pins. USB: USB 3.1, Type-A connector
Channel coupling
AC, DC, IEPE
Tacho input
TTL signal, with built-in power supply
CPU
Intel Atom® Processor N4200
Internal memory
256G SSD
Battery
14.4V, 2270mAh, 32.7W* (x2, swappable)
Interface
USB 3.1 type A connector x1
LCD display
1280x800 10.1” multi-touch color screen
Operating temperature
-10 deg C to 50 deg C
Product approvals
CE, RoHs, REACH, China RoHs,
Regulatory Compliance Mark (RCM), UKCA, FCC, KC
Drop test
1.2 meters - MIL-STD 810H
Vibration test
MIL STD 810 transportation
Sealing / Ruggedness
EN60529 IP65
Housing material
Dual material mold injection
Weight
1.9 kg with dual batteries, 1.72 kg with single battery
Size
300 x 195 x 50 mm
Input signal range
± 5Volt, ± 20Volt
A/D converter
24-bit sigma-delta A/D converter
Frequency range
0 Hz~40 kHz (102.4 kHz Max sampling rate)
Feature for Raw Data Recorder
Recorded data
Raw time data and TTL tacho signal
Monitor display
Recorder mode: Waveform, continuous waveform or spectrum
Real-time recorder mode: same as real-time measurement setting.
Storage media
Internal 256G SSD
Data review
Replay data in Playback mode
Maximum bandwidth
40 kHz with 4 channels on, plus tacho channel
Maximum length of recording
limited by memory space
Recording stop
by time, rpm, file size or manual
Feature for FFT Analysis
FFT real time rate
40 kHz with 4 channels on
FFT resolution
100-51,200 lines
Spectral map
3D waterfall or intensity plots for continuous spectrum measurements
Time windows
Hanning, hamming, flattop, rectangular, force, exponential Bartlett, Blackman, Kaiser
Analysis functions
Complex spectrum, power spectrum, cross power spectrum, FRF, time waveform, envelope waveform, envelope spectrum, coherence, PSD, Cepstrum, overall level, mean trend, rate trend, rotation speed.
Engineering units
Automatic units transform with pre-defined conversion table
Zoom FFT
Yes
Average
Off, Linear, exponential, time, peak hold
Trigger
On/Off, triggering source, pre/ post triggering, triggering slope and
triggering level
Map functions
Time waveform, complex spectrum, auto spectrum, cross spectrum
Control of Map measurement
Free run, by total count, total time, armed by time step or RPM step
Cursor
Single, harmonic, dual, side band, peak cursor, cursor marker
Envelope filters
500~2kHz, 1k~2.5kHz, 2k~5kHz, 5k~10kHz or user defined.
2D Plot format
Linear, Polar, Bode, Real Imaginery, Nyquist, Accelerance/Mobility/Compliance
3D Plot format
Waterfall, intensity map, overlapped
Mathematic operation
Unit conversion, FFT, iFFT, integration, differentiation, band pass filter,
high pass filter, low pass filter, band notch filter, scaling, weighting,
window, reciprocal, detrend, redo, undo.
Also you can check product : NEW Benstone Instruments fieldpaq II Portable Sound & Vibration Analyzers
Impaq Plus is a fully rugged portable 4 channel real-time analyzer built for advanced noise and vibration measurements in the field. Manufactured with a rugged enclosure by a dual injection molding process and protective sealing to provide an IP 65 rating for measurement in harsh environments. Equipped with a large 10.1” multi-touch color display, information is not only on display, but a more intuitive user interface with keypads on the left side.
Impaq Plus acquires measurement signal with precision 24 bit sigma delta AD converters to provide a high dynamic range and a up to 40 kHz maximum bandwidth.
