The FLUXUS G608 CA Energy is the perfect multi-tool for Energy Managers. It combines portable and non-intrusive flow and thermal energy measurement of compressed air, technical gases and liquids. The ATEX/IECEx Zone 2 and FM Class I Division2 approved transmitter allows measuring in hazardous areas without additional authorizations and precautionary measures.The integrated thermal energy calculation complies with EN1434 requirements, and allows quick and easy installation in HVAC systems, chillers or cooling towers.

The Flexim FLUXUS G608 portable gas flow meter is based on the widely used, highly reliable and versatile G601, but has been specifically engineered for its use within hazardous areas and is FM Class I, Div. 2 approved. It is an ideal solution for gas flow measurement in potentially explosive areas, whether for a temporary replacement of a stationary flow meter, check metering or service operations. Due to its certification, users are freed from obtaining a Hot Work Permit, making access to hazardous areas much easier and less time consuming.

The FTB-4 Pro delivers all the power of a high-end platform in a go-where-you-need field-testing tool. Combines SONET/SDH, OTN, Ethernet and Fibre Channel analysis, as well as an optical spectrum analyzer (OSA) with built-in polarization controller. OTDR/iOLM testing combined with fiber endface inspection and optical power measurement for fiber characterization and troubleshooting of any network, including access, LAN/WAN, data center, FTTx, metro,long-haul and ultra-long-haul.

The Flexim FLUXUS G601 portable clamp-on ultrasonic gas flow meter measures the flow of virtually any gas using our proven transit-time correlation technique. The ultrasonic transducers are simply clamped onto the outside of the pipe, meaning no cutting into the pipe or process interruption is required for installation. This highly accurate flow meter for use in hazardous areas allows for accurate readings, allowing for an inherently bi-directional gas flow measurement of operational and standard volume flows. As the transducers are mounted on the outside of the pipe wall, the system does not suffer from wear and tear or clogging, can’t be a risk for leaks and will not cause any pressure drops inside the pipe.

High-speed is happening. Better be ready. EXFO combined the strengths of its compact and flexible FTB-2 Pro Platform with all its latest high-speed modules (FTB-88100NGE, OSA, etc.) to bring to market the smallest and most powerful high speed testing solution available today. Never before has so much power been put in such a small platform. All the power of a high-end platform in a conveniently sized, go-anywhere field-testing tool.

The all-new E3 controller builds upon the foundation of the industry standard E2, adding a built-in touch-screen display and integration with Copeland's supervisory control software. This significant upgrade delivers a user-friendly, web-accessible interface that enables control over critical building and refrigeration systems, including: compressor groups, condensers and walk-in units, HVAC and lighting systems - all while giving end users a true, drop-in replacement for their E2, the E3 controller provides these robust capabilities while streamlining individual system control. To learn more about how the E3 supervisory control simplifies servicing and delivers robust system management and control.

The Flexim FLUXUS G601 portable clamp-on ultrasonic gas flow meter measures the flow of virtually any gas using our proven transit-time correlation technique. The ultrasonic transducers are simply clamped onto the outside of the pipe, meaning no cutting into the pipe or process interruption is required for installation. This highly accurate flow meter for use in hazardous areas allows for accurate readings, allowing for an inherently bi-directional gas flow measurement of operational and standard volume flows. As the transducers are mounted on the outside of the pipe wall, the system does not suffer from wear and tear or clogging, can’t be a risk for leaks and will not cause any pressure drops inside the pipe.

The 2715P-B15CD terminal is a PanelView 5510 terminal that has been manufactured and designed by Allen Bradley/Rockwell Automation. This terminal is compatible with controllers from the ControlLogix and CompactLogix series through an Ethernet/IP network. Elevate your automation experience with the Allen-Bradley PanelView 5510 Graphic Terminal, featuring a vibrant 15.0-inch TFT color display, intuitive touch screen and keypad, and dual-port Ethernet connectivity for seamless integration.

ControlLogix 5580 Controller with 40 MB User Memory, USB Port, 1 gigabit (Gb) Ethernet port, 300 EtherNet/IP Devices, 4 Character Alpha/Numeric Display. The ControlLogix 5580 controllers have an embedded Ethernet port for a direct connection to Ethernet-enabled devices and networks, and also support communication interface modules in the local chassis. To provide communication for ControlLogix 5570 or ControlLogix 5560 controllers, install the appropriate communication interface module into the local chassis.

ControlLogix 5580 and ControlLogix 5570 controllers are available with a conformal coating that adds a layer of protection when exposed to harsh, corrosive environments. Products with a conformal coating have a ‘K’ suffix at the end of the catalog number. ControlLogix controllers can monitor and control I/O across the ControlLogix backplane, and over network links. The ControlLogix 5580 controllers have an embedded Ethernet port for a direct connection to Ethernet-enabled devices and networks, and also support communication interface modules in the local chassis. To provide communication for ControlLogix 5570 or ControlLogix 5560 controllers, install the appropriate communication interface module into the local chassis.

The FTB-2 Pro is the most compact solution on the market for multirate, multitechnology, multiservice testing, delivering all the power of a high-end platform in a conveniently sized, go-anywhere field-testing tool. High-speed is happening. Better be ready. EXFO combined the strengths of its compact and flexible FTB-2 Pro Platform with all its latest high-speed modules (FTB-88100NGE, OSA, etc.)

The FTB-1 Pro model is a light-weight compact test platform allowing field technicians to carry out dedicated optical, Ethernet, multiservice and radio frequency (RF) interference test applications simply and efficiently, thanks to its ultra-powerful processing and highly intuitive interface. The FTB-1 version 2 is the result of EXFO’s time-proven expertise in portable platform design. Availabe in standard (FTB-1v2) or Pro (FTB-1 Pro) models, it's is the ideal solution for frontline network technicians involved in construction, commissioning and troubleshooting of infrastructures and services.

Having an E3 controller at the control helm of refrigeration and HVAC systems provides multiple advantages to technicians, end users and OEMs. Many modern retailers are understanding the importance of having a building and/or energy management system, and the E3 controller provides these robust capabilities while streamlining individual system control. To learn more about how the E3 supervisory control simplifies servicing and delivers robust system management and control.

Improve productivity with our PanelView Plus 7 Graphic Terminals that are easily configured to meet your unique application needs. Our Bulletin 2711P PanelView Plus 7 Graphic Terminals are available in standard and performance versions. Our performance versions are available in conformal coat, stainless steel and on-machine (ArmorView™ Plus 7) options, offering flexibility to meet your specific needs. You can use FactoryTalk® View Machine Edition to build your application, help simplify configuration and strengthen your Integrated Architecture® solution. These terminals include Ethernet connectivity and enable you to monitor applications from remote locations with VNC server and FactoryTalk ViewPoint connectivity.

TRITON-D10 with Fast-Track Intelligent Diagnostics. The complete multifunction diagnostic scan tool and scope multimeter that gets you to the information you need to make the repair fast. The Snap-on Fast-Track Intelligent Diagnostic system provides information specific to the vehicle and fault code. Includes Top Repairs, TSBs, smart data, functional tests, guided component tests, SureTrack expert information and pre and post scan reports. This professional-grade OBD-II/EOBD scanner features a full-color touchscreen, guided component testing, built-in scope multimeter, and comes complete with essential cables, test probes, and a branded carrying case.

Professional automotive diagnostic platform designed for technicians and service environments that require fast, reliable vehicle diagnostics. Compatible with most domestic, Asian, and European passenger vehicles and light trucks using standard OBDII and CAN communication protocols. Commonly used across many vehicle platforms including Ford, GM, Chrysler, Toyota, Honda, Nissan, BMW, Mercedes-Benz, Volkswagen, Audi, Hyundai, Kia and similar systems. Wireless communication between the tablet and scan module allows technicians to move freely around the vehicle while maintaining a live diagnostic connection.

The SNAP-ON APOLLO PLUS DIAGNOSTIC SCAN TOOL 26.2 is a high-quality diagnostic scanner designed for motorcycles, passenger vehicles, and heavy-duty/commercial vehicles. With built-in battery, color display, and internet updatable features, this tool is user-friendly and provides accurate readings. It is equipped with various supported systems such as ABS, SAS, SRS, TPMS, EPB, and DPF. The tool includes accessories like memory cards and adapter cables, making it a versatile and essential addition to any automotive workshop. Made by Snap-on, a trusted brand in the industry, the APOLLO PLUS Diagnostic Scan Tool is a reliable and efficient tool for diagnosing and maintaining vehicles.

The APOLLO-D9 provides the information and resources you need to get the job done. It even gives you access to Fast-Track Intelligent Diagnostics from Snap-on for filtered codes and vehicle-specific data to help you find the right fix, fast. No more hunting through forums or endlessly searching to find the right answers. No more wondering which fix is the right one for the job at hand. Access to Fast-Track Intelligent Diagnostics software requires an applicable software agreement.

The Ultra S2 introduces OE-style system analysis with multi-speed communication protocol networks, providing active module and network analysis to pinpoint ECU issues, test signal quality, and ensure network integrity. The MaxiSys Ultra S2 features a 13.7-inch touchscreen Android tablet with 512GB of storage and a powerful 6-in-1 vehicle communication and measurement device, ensuring smooth diagnostics and multitasking efficiency. Analyze related parameters simultaneously, ideal for engine fault diagnosis, performance analysis, and emissions troubleshooting.

MS919 Autel updates provide latest OE level coverage for more than 80 US Domestic, Asian and European vehicles, including supercar. Exceptional OE-Level functionality from comprehensive OBDII diagnostics & services to advanced ECU coding and programming. Automatic system and software updates with real-time push message notifications via internet. Interactive Data Logging sessions enable direct contact with Autel Support for first-hand troubleshooting of diagnostic bugs and error