The COBRA II dual channel vibration analyzer is a versatile yet compact instrument that combines all of the diverse technologies required for high-end engine vibration analysis, rotor track and balance, and propeller balance into one tool. With the Cobra II, all of these maintenance functions can be easily performed on virtually any airframe and engine type, such as a 2-propeller airplane. The COBRA II has a large, high-resolution, transmissive, full-color display with a super-bright LED backlight that can be easily viewed in direct sunlight.

The Commtest vb7 and Scout100-Ex Two-Channel Vibration Analyzers are suitable for every level of vibration analyst - From novice to expert . These instruments offer the power and convenience of dual-channel measurement and dual-plane balancing. Their balancing functions enable quick diagnosis and correction of dynamic unbalance. The SCOUT100-Ex and vb7 instruments combine accuracy, intuitive operation, ease of use, and outstanding storage capacity to ensure a premium return on investment. The SCOUT100-Ex is certified for an ATEX Zone 2 hazardous rating, whereas the vb7 is rated for CSA Class 1, Division 2.

Explore the most powerful Vibration Analyzer on the market – the A4500 VA5 Pro is the newest member in the Adash product range; comes with touchscreen and large display – complete with the Data Collector, Run-up Analyser, Balancer, Recorder, Stethoscope, FASIT, Lubri, Bump Test, Octave Analyser, Ultrasound, Camera, Pictures Gallery and Thermal Imaging modules. This 24-bit 120 dB instrument can be set to measure up to frequency span of 90 kHz and with 3,276,800 lines resolution. It can record up to 20 hours at 64kHz sample rate make it ideal for post analysis of any machinery fault.

The A4400 VA4 Pro II is a unique 24-bit, 120 dB instrument for machinery vibration diagnostics. Beside its ability to simultaneously in 4 AC Channels, 4 DC Channels and 1 Trigger; the A4400 VA4 Pro II has complete built-in modules for analysing, data collecting and the recording of vibration signals, in-situ balancing, run up and cost down, control and checking of lubrication and listening to vibration signals by the stethoscope feature. The instrument is equipped with an expert system that automatically detects machinery defects and the ACMT – low speed bearing analysis; both developed by Adash

Adash A4300-VA3 is portable very modern construction one or two channel datacollector and analyser. Main features are small dimensions and weight (970 g), large LCD display with high resolution and powerful processor which provides fast data analysis.Adash A4300-VA3 is determined for bearing condition analysis, lubrication analysis and analyses of mechanical defects of machines – unbalance, misalignment, resonance, looseness. Enables to perform any of the FFT, order or time signal analyses. Instrument memory enables archiving of large amount of data.

The A4300 VA3 Pro is the newest addition to our range of portable devices for vibration diagnostics. The A4300 VA3 Pro instrument can be confi gured according to your requirements by choosing optional modules: analyzer, route, balancer, recorder, run up or ultrasound. Optional modules can be purchased also additionally and downloaded to the instrument without the need of sending it back to the factory. There is a non-contact IR temperature sensor (for immediate bearing temperature measurement) and a LED stroboscope/torch. The A4300 VA3 Pro is designed for one-handed operation. With a weight of just 780g and a battery life of more than 10 hours of operation, the unit is suitable for long route measurements.

Vibrio M Ex instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and lubrication assessment. The A4900 – Vibrio M Ex is equipped with 4 MB of memory for data storage. Data memory allows you to perform off-route and route measurements. The professional software DDS for Vibrio M Ex can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included. The A4900 – Vibrio M Ex is supplied as a complete system including quality piezoelectric sensor, magnet and coiled cable for industrial use.

The SKF Microlog Analyzer AX is the most advanced large screen route based analyzer. The SKF Microlog AX’s features allow you to capture a wide range of vibration data quickly. The analyzer provides the flexibility to support applications that are most important to your company’s specific predictive maintenance program. the SKF Microlog AX series is approved for use in hazardous environ- ments requiring ATEX, IECEx and Class I Division 2 certifications.

The SKF QuickCollect sensor is an easy to use bluetooth enabled handheld sensor that connects to apps that work with both iOS and Android tablets and smart phones. This SKF QuickCollect sensor is ideal for service, reliability, operations, or maintenance personnel as part of a walk around data collection program. The QuickCollect sensor is available for both safe areas and for use in hazardous areas. SKF QuickCollect CMDT 391-EX, is approved for use in ATEX. IECEx and NEC Class I Zone 1 rated areas.

The SKF QuickCollect sensor is an easy to use bluetooth enabled handheld sensor that connects to apps that work with both iOS and Android tablets and smart phones. This SKF QuickCollect sensor is ideal for service, reliability, operations, or maintenance personnel as part of a walk around data collection program. The QuickCollect sensor is available for both safe areas and for use in hazardous areas. SKF QuickCollect CMDT 391-EX, is approved for use in ATEX. IECEx and NEC Class I Zone 1 rated areas.

The AMS 2140 Machinery Health Analyzer takes vibration data and analysis measurements to the next level. It features simultaneous four-channel plus phase data collection and unique peak detection capabilities for the earliest indication of bearing and gearbox degradation. In addition to delivering faster data collection for less time in the field or more machines monitored, the AMS 2140 is ergonomically designed for comfortable, single hand operation all day long.

EMERSON CSI 2140 is an electronic test equipment known for its versatility and accuracy when testing a variety of parameters including power quality, energy, and waveforms. This device is made with the latest in cutting-edge technology, so users can expect only the highest levels of accuracy and reliability, along with easy-to-use and easy-to-understand interfaces. Firstly, EMERSON 2140 is an AC/DC 30 MHz signal analyzer that is designed for testing and measuring power quality, energy consumption, and waveforms. It is capable of making calibration-free threshold measurements and frequency response measurements with a 0.1 Hz resolution.

The Emerson CSI 2130 Machinery Health Analyzer is a highly efficient tool designed to streamline maintenance activities. With its fast data collection, ease of operation, and advanced diagnostics, it provides actionable information to prioritize maintenance tasks effectively. This versatile analyzer is equipped with a range of features, including dual-channel vibration analysis, embedded intelligence, peak detection for bearing and gear analysis, and motor current analysis. It is lightweight, has a large color display, and is IP-65 rated for durability in industrial environments.

The AMS Trex Device Communicator allows for issues to be addressed on the spot, avoiding unnecessary, and potentially destructive/invasive physical investigation of the problem. With an AMS Trex in hand, users can properly diagnose intelligent field device issues in the field, and maintenance teams will experience significant savings in work hours and peace of mind knowing that problems will be fixed quickly and properly the first time.

Impaq Plus is a fully rugged portable 4 channel real-time analyzer built for advanced noise and vibration measurements in the field. Manufactured with a rugged enclosure by a dual injection molding process and protective sealing to provide an IP 65 rating for measurement in harsh environments. Equipped with a large 10.1” multi-touch color display, information is not only on display, but a more intuitive user interface with keypads on the left side. Impaq Plus acquires measurement signal with precision 24 bit sigma delta AD converters to provide a high dynamic range and a up to 40 kHz maximum bandwidth.

VIBER X5VIBER X5 MK III is an advanced vibration analyzer, together with SpectraPro® PC software it provides a complete package for redictive condition maintenance. VIBER X5 MK III™ is capable of measuring, processing, displaying and storing a wide range of measurement parameters. You can collect various types of field data; examples are vibration information,bearing analyze, temperature, speed and other process variables that enables you to expand its functionality by adding new measurements to improve your analysis capabilities.

The SKF Microlog Analyzer dBX has been developed with users in mind. This is why it has a large screen, developed for efficient analysis in the field. This is why it has SKF’s most powerful processing power for fast measurements and the ability to perform analyses on the device. This is why it is more userfriendly than ever. The analyzer provides the flexibility to support the applications that are most important to your company’s condition-based maintenance strategy. Developed for use in a wide range of industries.

The Viper 2E Vibration and Performance Analyzer is a compact instrument with all the power of the Viper and Viper 2 platforms. Designed for the harshest of environments with EMI Shielding and new cabling. Vibration and Acoustic Analysis on Jet Engines and Airframes, Transient Balance, Fan Trim Balance, and even Propeller Balance features are ready to go anywhere you are.

The SKF Microlog Analyzer dBX has been developed with users in mind. This is why it has a large screen, developed for efficient analysis in the field. This is why it has SKF’s most powerful processing power for fast measurements and the ability to perform analyses on the device. This is why it is more userfriendly than ever. The analyzer provides the flexibility to support the applications that are most important to your company’s condition-based maintenance strategy. Developed for use in a wide range of industries.

Like no other, the SMC ( Smart Machine Checker ) is a portable, machinery diagnostic tool that allows mechanics and maintenance technicians to check the health of any rotating machine, as needed, in a matter of minutes. It requires no special training or certification and generates straightforward, simple machine diagnostic reports with both confidence and severity levels. The Acoem SMC wireless tri-axial sensor will take readings in the vertical, horizontal, and axial direction simultaneously making the measurement process fast and easy